Debian Hardware :: Intel Soft Modem Configuration Error - Unable To Prepare Temporary Kernel Tree
Dec 4, 2010
I am runing debian-5 (lenny), the default kernel 2.6.26 was unable to start the x so i installed the new kernel linux-image-2.6.32-5-686_2.6.32-28_i386.deb, now x works, but there is problem building modules for the intel soft modem linux driver hsfmodem-7.60.00.00oem which is supplied in the modem cd by the intel company.
I installed these kernel packages for this purpose:
linux-base_2.6.32-28_all.deb
linux-image-2.6.32-5-686_2.6.32-28_i386.deb
linux-headers-2.6.32-5-486_2.6.32-28_i386.deb
[code]....
in all these cases hsfconfig failed with the above error,
I installed the latest kernel liquorix (2.6.35) but when i want to install the Nvidia driver downloaded on the Nvidia website (256.53), i have an error message because Nvidia doesn't found the kernel source tree.
I install linux-image-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb, linux-headers-2.6.35-6.dmz.2-liquorix-686_2.6.35-16_i386.deb and build-essential. I don't understand why the installation doesn't works.
I am using DEBIAN 6.0 and I wannna update my kernel from 2.6.32 to 2.6.38. Every time, I do it but after the installation & rebooting into the new kernel it gives me error "UNABLE TO BOOT INTO THE KERNEL".
I am unable to get my intel pro/wireless 3945abg connected to my router. The firmware has been installed and at first was even able to connect, but now the access point doesn't even show up in network manager. I am currently able to connect using a USB wireless adapter, but for certain reasons, would prefer to use the former. I've looked over this page with no results.
I've been trying for a couple of days now to get the Huawei E1750 to work but have had no luck so far. I've installed the packages usb-modeswitch-1.1.4 and usb-modeswitch-data and have edited the usb-modeswitch.conf to include the following:
So after getting around the Fakeraid bug, and the grub bug, and all the other bugs killing my system fixed and then i moved on to install my video driver. There was nothing in Administration>Hardware Drivers, so i downloaded the latest driver for my two 8600m gt cards. Did the whole ctrl+alt+f2 and then stopping xserver and then running the driver install only to run into yet another damn bug(see log below)
I have tried fixing it by doing what other threads have said to do e.g:[URL] still nothing. Below is the Nvidia log.
It is saying to make sure there is enough room in the tmp folder, so I cleaned out the entire tmp folder but the same error is still happening. Is there a way to make the tmp folder bigger? Or perhaps extract the temporary files to a different folder? Or maybe the size if the tmp folder is not even the problem?
I am trying to setup Slacware 13.1 x86_64 to a encrypted partition. I used the README_CRYPT.TXT howto : [URL] At the step when I create an initrd.gz I get this error: Quote: ERROR: No /lib/modules/2.6.33.4-smp kernel modules tree found for kernel "2.6.33.4-smp"
I tried to look into the directory and there was only modules under 2.6.44.3. So I tried to change the command into: Quote: mkinitrd -c -k 2.6.33.4 -m ext3 -f ext3 -r cryptroot -C /dev/sda2
This command was successful, but I don't know if this is alright. I made the changes in lilo.conf, add initrd = initrd.gz. This is all on unencrypted /boot partition. The boot=/dev/sda1 I also set for the unencrypted boot partition. When I boot the system I get a kernel panic:
I got a new laptop the other day, repartitioned it and installed Lenny. The wireless did not work. From some searching, I decided that I have the 14e4:4727 broadcom chipset. The driver I need is partially supported by the 2.6.33 kernel. I installed squeeze and downloaded the 2.6.35-7 kernel from kernel.org Then compiled it with the debian 2.6.32 kernel config file. Once it was done I installed the kernel deb files, and restarted it.
Kernel 2.6.35.7 Compiled with commands make oldconfid make menuconfig export CONCURRENCY_LEVEL=2 make-kpkg clean fakeroot make-kpkg --append-to-version "-hermes" --revision "10-5-2010" --initrd kernel_image kernel_headers
[0.433831] PCI_root PNP0A03:00: address space collision : host bridge window [mem 0xafffffff-0xdfffffff] conflicts with PCI bus 000:00 [mem 0xd0000000-0xffffffff] And it seems to hang until I manually hold the power button to shut it down.
Before I compiled my own kernel I tried to use the liquorix-2.6.35-amd64 kernel with the same result. Am I doing something incorrectly?
Computer: DELL Inspiron m5010 4g ram phenom 2 triple core ATI Mobility Radeon HD 4250
I have been using linux primarily for a year or two.
1. I am unsure if any system changes have occured. I am sure I must have changed something, but apparently did not document it. 2. Printer does work from other computers 3 Computer was originally wireless connected, but switched to USB. This had no affect. Well I can scan now so great. 4, Printer is HP 6500a. 5. Printer has worked from this computer before 6 This is from cups error log:
D [05/Jan/2015:11:47:48 -0500] [Job 147] Set job-printer-state-message to "Can't copy stdin to temporary file", current level=ERROR D [05/Jan/2015:11:47:48 -0500] [Job 147] prnt/hpcups/HPCupsFilter.cpp 536: cupsRasterOpen failed, fd = 0
Since I got the liquorix kernel installed on my machine I got an error of setting kernel variable error. net.ipv6.bindv6only at boot time, since it wasnt a big deal I never looked further into it, but now that I had some spare time and I didnt want to see any errors on my machine I found a solution for it, with a little googling all we need to do is read the /usr/share/doc/procps/README.Debian and bingo no more error i hope this help anyone else with the same problem. I did the 3rd suggestion on that file to load the module in /etc/modules cheers.
I couldn't connect my Micromax 300G modem in Debian Linux. From internet (in Windows Vista), I came across the information of USB_ModeSwitch and then I downloaded it. While going to install it, I came across the problem that TCL-interpreter is not available in Debian Linux. Then again I restarted my laptop in Windows Vista and connected my Micromax modem and from internet downloaded TCL8.5.10-src.tar.gz. But while going to install it, I came across the problem that " configure: error: no acceptable C compiler found in $PATH " . Also as presently, I am unable to connect my modem therefore I am unable to issue the code:" apt-get update ".
I would like to install above mentioned driver. I need to prepare kernel for this instalation, but this information I didnt find on openSUSE pages. I add openSUSE 11.3 KDE
I recently started having this odd behaviour while using and loading cpufrequtils on boot, I don't know if it is happening to someone else.During boot I'm getting( when /etc/init.d/cpufrequtils invokes /etc/init.d/loadcpufreq to load the proper module):
Loading cpufreq kernel modules...FATAL: Error inserting speedstep_centrino (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/speedstep-centrino.ko): No such device FATAL: Error inserting pcc_cpufreq (/lib/modules/3.0.0-1-amd64/kernel/drivers/cpufreq/pcc-cpufreq.ko): No such device
i have downloaded the pidgin.repo file from the web and copied in /etc/yum.repos.d. and i simply start the yum-updatesd service. When i fire the command yum install pidgin, it gives some name resolution problem. i am accessing net through proxy server.RHEL 5 is my distro. This is what the error msg i am getting.
I've recently installed stable (5.x, I think that's lenny...) on a laptop and there's no sound at all.
I had this problem years ago when I last installed linux on here. I solved it then and I thought the solution was unchecking "external amplifier" in alsamixer.
I believe my sound card (Intel 82801DB-ICH4) is detected and the appropriate driver loaded (snd_intel8x0) however, even running speaker-test produces no sound (no error either).
I've read that the intel hda have a model parameter found by greping for codec in /proc/asound/card? but I can't find any information about what codec is used in any path like that. Is there a model parameter for this card too? I'm on a philips freeline X10 laptop.
I ran alsaconf and nothing seemed to change. I tried alsactl init but the command init wasn't found, I suppose that must only be in newer releases. I installed libesd-alsa0 to replace libesd0 but that didn't help (should I revert this file? libesd0 says it's for oss). I also appended "options snd_intel8x0 index=0" to /etc/modprobe.d/alsa-base which got the card registered as the first device.
I get no sound with kernel 2.6.30-2-686 or 2.6.32-5-686. Works fine in 2.6.26-2-686. Card is found, it accepts streams but plays nothing to either internal speakers or headphones.
I recently installed debian squeeze 32bit on a second partition of my amd athlon 64 X2 dual core machine.Currently it is using linux-image-2.6.32-trunk-686 kernel.But linux-image-2.6.32-trunk-amd64 is available.on the repository.Is it a 64bit kernel or 32bit kernel optimized for amd64 architecture?
I am new to Debian. I am trying out the live cd but can't seem to find how to connect to the internet. My setup is Ethernet card and DSL modem, no routers, no wireless. How do I set this up?
Its my liillte headache with my hsdpa modem. using wvdial i can connect to the net huawei e220l but NetworkManager is a different story. # lsusb | fgrep HuaweiBus 001 Device 010: ID 12d1:1003 Huawei Technologies Co., Ltd. E220 HSDPA Modem / E270 HSDPA/HSUPA Modemi',m ok with wvdial and its gui wrapper(gnome-ppp) .i just would like it to be functional since my noob bro
I have a problem with my custom kernel when I want to create the Nvidia kernel module.After this finished I installed the image and headers and created the Nvidia kernel module. Everything worked fine.However, if I remove the linux-source from my home directory then I can't create the kernel module.Even though I have the headers for the kernel installed.
I have installed the fedora 14, but there is no kernel source tree.I read the doc "building a custom kernel".But I don't want to rebuild a new kernel.I just want to install the source tree of current kernel.Could someone tell me the way?
Ok first off, I love debian, but on my new notebook I am getting a little frustrated with the terrible, video performance.Direct rendering is enabled on both systems, and openGL is working (I can if I wanted to use compiz etc...) fine on both systems, just running slow on debian.
I have tried Lenny, Squeeze and Sid, I have compiled the intel driver (and Mesa3D) from git and got it working (I am sure its working because its given me a slight boost), I ahve also tried building the latest stable (and RC2) kernel.If I install ubuntu 9.10 I get pretty decent 3D performance, its not ground breaking, but hey its an intel chipset so I am not expecting to kick the latest nvidia / ati card's backside.I really dont want to use ubuntu, I find it unstable when compaired to debian, but I also want to be able to play the odd game when I am bored, and at the moment I just cant do that under debian
According to HDA Analyzer, my sound card is muted; however, I can't unmute it through HDA Analyzer or anything else. According to alsamixer, everything is unmuted, though. According to the ALSA documentation, there's no 'model' id for my codec -- Conexant 5069 -- so I don't have an option to put in /etc/modprobe.d/sound.conf. What can I do to unmute the card???
Go to "/lib/modules/2.6.32-5-amd64/kernel/drivers/net/e1000e/" and delete the e1000e.ko-file
Then download [URL]
Take the newly downloaded e1000e.ko-file and move it to "/lib/modules/2.6.32-5-amd64/kernel/drivers/net/e1000e/"
And finally load the module with either: "# modprobe e1000e" or "# insmod e1000e".
You should now have a working ethernet connection.
If connection is lost on system restart try rmmod e1000e; modprobe e1000e
I've for the first time installed linux (debian) to my computer. And I have a problem with ethernet that I can't solve.
I have a Asus Sabertooth P67 motherboard with built in ethernet card, I cant find any drivers for linux, I've tried google, Asus support page etc, but can't anything that says it will work with my computer, just a alot of windows drivers.
where I can find the drivers? Or if there's another way to solve the problem. When installing Debian i could choose between different drivers but no one worked, I've also tried with my motherboard CD but there was just windows drivers...
