When I type my modem configuration page IP in browser instead of showing configuration page it shows default web page for apache.What's wrong?Is there any IP conflict?
i have problem with my modem zte ac682, i used ubuntu 10.10 and when i configuration my modem with wvdial my modem was not detected, this is my configuration
All has been fine with my emails but today morning when i tried to log on I got an error message "You must be logged in to access this page, go to logon page" I dont understand why even when i supply my correct user name and password.
I have a usb modem : huawei e220.I am using ubuntu 9.10. I can't access the internet using it. I made a connection form the mobile broadband tab but every time it disconnects .Ubuntu identifies the modem but every time i try to make a connection it fails.
So i have a d-link modem and the DHCP server is not running. I need to access the internal config to do some troubleshooting. IP is supposed to be 192.168.1.1, but I only have my DSL ppoe IP, and can not access it.
I can connect to my access point to surf internet. I setup my Dlink access point (password, network name, etc) in Vista by visiting "http://dlinkap/" in my web browser.
In ubuntu, I can connect and surf the web/internet but i cannot access the setup page.
When I try to type the "http://dlinkap/" to my browser then the browser will redirect it to google search.
I try 192.168.1.1, I can access my linksys router. but my dlink access point, i cannot access the setup page.
I m using an adsl modem router for connecting into the internet while my operating system is windows 7,but i want to learn open source platforms like UNIX and Linux. so for this reason i install a Linux distro which is centos5. i want to ask how i can configure my modem router with centos. modem router model is Billion BIPAC 5210s.i search internet for its drivers and the only thing which i found modem driver for windows platforms and nothing esle want to know that for installing this modem with my centos i need to download its drivers or not and if the answer is yes or no how comes !
Ive got two connections, one is the eth0, that is the LAN connection to the DSL modem (192.168.1.1) and the other is the DSL connection that I connect to use the internet. Now I can only connect to one of the two at a time, so when I'm connected to the internet, I am not able to access 192.168.1.1. How do I use the two simultaneously?
Presently this client access the net through following setup ADSL modem -> hub -> all computers
Now they want to do some kind of bandwidth control, content filtering. So I tried setting up squid with dansguardian. This is what I did ADSL -> linux server -> all computers.
The linux server has two NIC cards. One to the ADSL router and another to the local hub. This is how my squid.conf file looks like
Have set the gateway server as 121.x.x.1. Which is the gateway server of the ISP. Now I can ping the local network, but cant ping the gateway or any other website. Also I am unable to access the router administration page.
I just installed Lucid Lynx Ubuntu on my computer. I love it, but I do not see how to configure my dial-up modem and connect. I'm hoping it's still possible. Here's my hardware.
i'm setting up apache on 5.3. i can access the apache test page without a problem from the server via URL... But i can't figure out how to access this page from another computer within the domain (for when i upload my home page.
I have 2 pcs at home. I dont have a switch so I can connect only one PC at a time to my adsl router/modem for internet access. In the past I had successfully connected the two PCs (NIC to NIC) to each other using the same ethernet cable which was supplied with my dlink adsl modem.
Recently the motherboard of on of my PC went bad so I replaced it with a new one. The problem is when I connect the two using the same Ethernet cable they won't connect. The lights on the Ethernet port won't light up. I can still connect both of them to the adsl router (NIC to Router) (one at a time).
I am wanting a computer with an external dialup modem (ppp0 modem through a com port /dev/ttys1) to act as a gateway to the internet, forwarding internet traffic through ethernet (eth0 is set to static 192.168.2.2) to a router (the router is 192.168.2.1) where it will be broadcast to other wireless computers like my laptop (192.168.2.3). I've had this setup until recently when the gateway computer (the one with the modem) died. Now I'm replacing that machine with another box and an install of Ubuntu 10.10 but so far things aren't working for me.
Success so far:I have dialup access working on the new box. Took me a while to work out the configuration for getting dialup working, though the IP address is Dynamic (or it won't stay connected), "Check carrier line" is off, and "Ignore Terminal Strings (stupid mode)" is on in order to successfully connect and stay connected to my ISP. I also had to make my normal (non-root) user "lancer" a member of the "pid" group (the reboot) in order to use gnome-ppp as non-root. The laptop (192.168.2.3) is successfully connecting to the router (192.168.2.1) as I can see the router configuration page when I type http://192.168.2.1 into the laptop's web browser. This setup is unchanged from how I had it before when this was previously working and I don't want to change how the router itself is set up. What I want is to know what to fix in the new box in order to get it connected to the router (through ethernet) and bridging the internet through.
My problem is that whenever I plug in the eth0 from the gateway (192.168.2.2) to the router (192.168.2.1), Ubuntu's automatic plug-me-in network detection kicks in and I find my dialup no longer working through some kind of IP conflict (at least that's what I think it is). Maybe I don't have the "gateway" correctly assigned? (in the gateway computer for the ethernet connection, I had it pointing to itself as I don't know what to put for "gateway IP" as that is automatic So, just to check my connection, here I am pinging google (from the gateway computer which has the dialup modem) once a dialup connection has been made.
Code: lancer@lancer-desktop:~$ ping www.google.com PING www.l.google.com (74.125.237.17) 56(84) bytes of data. 64 bytes from 74.125.237.17: icmp_req=1 ttl=55 time=179 ms 64 bytes from 74.125.237.17: icmp_req=2 ttl=55 time=176 ms 64 bytes from 74.125.237.17: icmp_req=3 ttl=55 time=158 ms
[Code]...
What do I need to do in order to make Ubuntu of my gateway computer stay connected to my dialup but also simultaneously share an ethernet LAN to my wireless router and feed traffic to the other computers from there? I have googled this but some of the most promising instruction (e.g. http://www.ubuntugeek.com/sharing-in...in-ubuntu.html) call for packages like dnsmasq or ipmasq which seem defunct now in Ubuntu 10.10. Other pages seem to suggest dual-networks "can't be done" in Ubuntu [URL].. (what!?! I had it before my other gateway died)
ok so i ran into a problem, im using web min to access my server, and im setting up postfix and, dovecot first problem is i want to be able to access my email account from a web page, with log in, so my question is how can i do that?
find and install modem driver for the Alcatel X200 USB modem?
I've been all over the internet trying to locate Linux drivers but no success. Alcatel's website says is not supported, only in Windows. I'm sure there's gotta be a way to use the X200 in Linux.
i'm running Kubuntu karmic and i've been using a 3G Huawei E1552 modem to connect to the internet, everything was going well when suddenly my modem stopped working. I've tried reconfiguring everything, i even reinstalled kubuntu from scratch with no success.Here's a part of my /var/log/debug
HTML Code: Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099883] usb-storage: device found at 7 Feb 8 17:14:01 alberto-laptop kernel: [ 1532.099888] usb-storage: waiting for device to
I've a question about a connection to a shared folder on a pc behind an ubuntu 10.04 server. The Ubuntu machine itself is behind a Cisco router. Cisco router has a nat 1-to-1 to Ubuntu machine with the static public ip x.y.x.z The Ubuntu machine has one only interfaces eth0 bridged with a virtual tap0 in the virtual br0 interface. This because on the Ubuntu machine is running OpenVPN in bridged mode. I want to reach a private share on the host 192.168.100.2 using the x.y.w.z static IP. Is that possibile? Ubuntu machine has no firewall running (I was not able to run shorewall firewall for now).
I installed and tested both Windows server 2003 and Red Hat 9.0 with vmware workstation7. After installing 2003 can access internet but Red Hat can't. I want to test squid proxy server, send mail server, webserver etc. So, I would like to know how to setup WMware's network configuration for Red hat can access internet.
Below link is the configuration of VMware network setup both Server 2003 and Red Hat.
Here is Red Hat Configuration: http://i64.servimg.com/u/f64/11/74/16/17/linux10.jpg
Here is Windows Server 2003 configuration: [url]
I am using wireless connection to access internet.
so after entering in a command to the terminal it will come up with a page that says package configuration on the top left hand corner. I can read through everything but I can't click on the <ok> thats at the bottom of the page.
on the command line, I get the man page for perl, which lists all of the sections into which the perl man pages have been split. How do I access one of these sections? For instance, the first section is perlintro, but if I type
Code: man perlintro
I get an error saying there is no such manual entry. How do I access these parts of the manual?
My computer functions good, I can see and play almost everything, but I have no access to the following web page: http://flusserstream.khm.de/flussers...&chapter_id=16When I try to open it, it says done and nothing happens.What do I need to make it well?
Doesn't seem to work in Ubuntu - it just downloads the file instead of taking me to a login page. It's not a browser problem as I have the latest version of Firefox, which works fine under Windows XP.
I have a cheap and cheerful netbook (Advent 4213) that I carry around with me running the latest lucid build, it has a built in 3g modem which I like cause I don't have to carry a dongle round with me.... which I continually lose anyhow I also have two data plans, one with Orange UK and the other T-mobile UK. The 3g modem is a HUAWEI Technology.
Both sims work for normal Internet access, I can connect to email servers, access web (both http and https) sites, but when I'm using the T-mobile sim Ubuntu One crashes after about 5 mins after attempting to connect. At first I thought it was a problem with either Ubuntu One itself or the lucid build, so I tried accessing the website interface.... I can login but when I go to view my files (I am assuming you are familiar with Ubuntu One) the page "load" progress bar gets so far and then stops..... it appears to be trying to access ssl.google-analytics.com, but just sits there and eventually times out, I am assuming this timeout is what is causing the Ubuntu One to crash.
Stick the Orange sim back in and everything is OK, go back to the T-mobile sim and it no worky anymore hence the reason I think this is a T-mobile issue and not something wrong with Lucid or Ubuntu One..
I went to see if the iPhone was connected and it wasn't listed--and she was now on my wireless network, on the Internet. For the past month, I have experienced slow Internet (the Qwest people came over three times to fix the problem, to no avail.) And, when my laptop and desktop are turned off, the modem still shows activity, as if someone was downloading large files. Qwest insists that my network is secure and no one is using my network (and my house was built in 1997, so the wiring is fairly new and I have had NO issues with Internet/phone and had Qwest service longer than I can remember).
To make a long story short, I am concerned that my router has been hacked. I live in a rural area, so there's no teenagers or weird-o's around that I know of that would do that (unlike city/suburban areas)--and my Linksys router is "lying" to me, as my nephew was ON MY NETWORK and the SSID, MAC address and IP number was not listed on the LAN device list--only my laptop/desktop are listed, and she was happily checking emails on my network. I have changed my WPA2 password three times just in case, no fix.