Is there a command that display all network info. I'm looking for ip address, subnet mask, gateway, and dns. If there isn't a single command could someone please write me a shellscript that can do this?
View 3 Replies
I have a simple problem where Windows machines can connect to shares on my Fedora server (via SAMBA), but only when using the IP address. When Windows users to go Network (in Vista and 7) or Network Places (XP), then all computers on the network show up in that window except for the Fedora server. How can I get my server to appear in that space? Although I can connect via IP address, we are using some programs that can only find shares by the computer name (aka if it's found in the Network window). I have checked and rechecked that the workgroup name is indeed correct.
View 3 Replies View RelatedThis may fall under the "ain't broke don't fix it" category but it's driving me nuts. I've got the Broadcom 4322 wireless adapter in my laptop and it works fine with broadcom-wl driver and kmod. However there is no ifcfg-eth1 file and the card does not show up in system-config-network.
View 2 Replies View RelatedI'm trying to get my computer connected to the internet at work. how to set up a connect in ubuntu or any other Linux system. So I'm completely on my own. I went into windows to get my IP address, subnet Mask, gateway address, and DNS server. I put these in using sys>admin>network>wired connect | dns. Nothing works. I went to Network Tools and tried to ping the dns server and another address given from the Ubuntu help menu. Nothing. In network tools, I see two options under devices, loopback interface and ethernet (eth0). I can't do anything with loopback and it has the standard 127.0.0.1 255.0.0.0 showing (shadowed). So i skipped that and then clicked on the ethernet option and the "configure" button becomes active. The ip and such that I put in seem to be showing there, but when I click on "configure" I get something like "The interface doesn't exist". the network proxy setting is "direct internet connection". Seems that since I can connect when in Windows, I ought to just be able to get all the information I need and set it all up in Ubuntu. Maybe I don't have enough info from Windows, and maybe I'm not putting things in the right places in Ubuntu.
View 6 Replies View RelatedI got dumpped into a enviroment where my knowladge of linux is sadly (yes sadly I actually want to learn more ) little. I have a server that was configured with a mapped drive.I have done the following and cant find where this is pointing. Checked the FSTAB and mount and df -lh and did a vi on the cronjob that does the copying and everything just gives me basically this information... brw-rw---- 1 root disk 253, 7 Jun 19 16:22 devmapperVolGroup_ID_10726-LogVolV How do i get the info about what the devmapperVolGroup_ID_10726-LogVolV Network path actually is, and edit it for that matter.
View 1 Replies View RelatedMost of the time whenever I run dpkg -l I get cryptic output. For instance
[Code]...
Because I normally use it to see only one file (while multiple files are possible as well), was wondering if there was a way to tell dpkg to show couple of lines as output. I do see that there is a /etc/dpkg/dpkg.cfg file as well as /etc/dpkg/dpkg.cfg.d directory as well. Looking forward to info. on the same.
I'd like my DSL box to show a picture instead of the start up info as the system boots.
View 1 Replies View RelatedI'm running Slackware64 13.1. When I change the bright of my screen, xfce power manager show a info bar. But now it disappear, when I run xfce4-power-manager from a terminal I get this info:
Quote:
Another thing, Slackware don't have cpu governors?
I just got Ubuntu and I feel like there is going to be a really simple solution but right now I cannot find any information on a solution. I run 9.10 desktop i386 or w/e and I have a wireless connection. The network does not show up when I go the network manager to select a network. No networks show up and all it lets me do is create a new network connection which I have no idea how to do. I think it might have to do with my device recognition, but the network is fine it is just Ubuntu.
View 4 Replies View RelatedI use Wicd 1.7.0 to manage my wired/wireless network connections and it worked well with Ubuntu 10.10. Now that I upgraded to 11.04 the wireless indicator does not show up on the top bar, even though the wireless is connected and working. I have no way to see my connection, or view available wireless connections. I looked through system settings, but don't see any options for selecting what shows up on the top bar.
View 8 Replies View RelatedI am having a situation where I couldn't connect to Internet through wireless and LAN cable. I have done ifconfig, it only shows me "lo" info. May I know how can I bring up the LAN and wireless?
View 2 Replies View RelatedI'm trying to search for more wireless networks but i cannot find a way to make network manager search for more wireless networks. It only displays 2 wireless networks and none of them is mine, even though I've got my wireless router at less than 1 meter from my PC.
View 2 Replies View RelatedI'm on Windows 7 64bit and Ubuntu 11.04 64bit.Windows is on a net book with not so much hard drive space so I want to keep all my music and movies on my hard drive of my Ubuntu desktop. When I try to find my Ubuntu machine I get nothing though..No matter what though, Win7 simply will not see it on the network. Not even when I run "\ipadress"..If anything is there away to delete everything related to Samba and start over?
View 3 Replies View Relatedfc14 do not handle nis info correctly when showing my network homedir. It is shown as "nobody nobody". Local files are shown with correct UID:GID
When I log in on an RedHat el5 machine (on the same network), every thing is ok, but when I log in on a fc14 machine my network homedir files are shown as "nobody nobody"
My homedir is placed on a REDHat el6 and using nfsv4
Does anyone have a clue as to where configuartion can be changed?
I deleted all APs in my Wireless Section of network manager. After that, the whole network manager icon disappeared. I added the icon back on the panel, but I don't think its the right one. It doesn't do the two green cicles thing when I connect my ethernet wire in. It also doesn't show any wireless AP when I left click on the icon. It doesn't even have an X mark on the bottom left of the icon when no network is detected
View 1 Replies View Relatedim just getting the hang of ubuntu 9.10, and then all of a sudden 10.04 comes over and screws everything up with the upgrade. i did the upgrade, and now the network manager wont show up in notification areas. any clue as to why? help is greatly appreciated. also, my machine does register that the drivers for wireless card is installed, and when i run lshw -c net command with sudo priveleges, it says it can detect networks, so im confused as hell.
View 9 Replies View RelatedI have been routing network traffic based on MAC addresses, so we can distribute traffic evenly over a series of WAN IP addresses.Everything seems to be going well, but I have a very curious problem. One of the users can connect to the network without problem, but I don't see him in my network administration application (neither his MAC address or leased IP address).At the same time, I'm trying to identify other unknown computers on my network based on MAC addresses I don't have on file.
View 4 Replies View RelatedRemoved hard drive from our office server to check model number (windows pc). reinstalled same hardrive and now i can't connect to server from the network (MAC). it gives me error code -43.
View 9 Replies View Relatedis there any tool (terminal command preferably) which can show the frequency and the type of the connected mobile broadband network. I mean HSDPA/GPRS etc and 900/2100MHz. At my country there are 2 frequencies used for UMTS, 900MHz for rural areas and 2100MHz for urban and I need to know what type is the connection and what is the used atm frequency. I am using wvdial for connecting to the internet.
View 2 Replies View RelatedI find it very frustrating that documentation suggests using PEERDNS=no in /etc/sysconfig/network-scripts/ ifcfg-eth0 in order to override resolv.conf information only to find out that both NM and network init scripts ignore DNS1, DNS2 and DOMAIN settings.So my question is how do I correctly configure resolv.conf settings that will persistently override dhcp information on a F12 system that has NM removed and uses the network service scripts?
View 3 Replies View RelatedI need to find out why one server doesn't accept mail from my server. Mail isn't delivered and isn't bounced.Usualy it's easy to find in mail log files, but not in my new server. I just checked mail log files and discovered there is no information for each email sent from my server.
All log files:
mail.log
mail.err
mail.info
mail.warn
Ive installed Ubuntu recently but none of my attempts to get the wifi network working were successfull. It establishes connection but the indicator shows no signal and I cant connect to any website, I tried pinging external IPs etc. None of these worked. lspci -nn | grep 'Wireless Brand'Does not show anything. I could find 03:00:0 Network Controller: Intel Corporation Ultimate N WiFi Link 5300 lsmod | grep "wlan_module_name"Doesnt show anything. Restarting network says only: *Reconfiguring network interfaces... Kernel boot messages:
[Code]....
The network Im trying to connect to is hidden, so I have to input SSID manually, I doubt this causes the problem.
I want to get info about network interfaces in C , is there any library for this purpose ?
View 1 Replies View RelatedI want to implement a cross layer approach. I want to pass the network information such as delay from the MAC layer to Network layer. Can you tell me the way I am new to this. I am using linux (fedora). I think some system call will do the trick. Correct me if I am wrong. (I want to implement QoS matrices)
View 1 Replies View RelatedI am using a fully up to date openSUSE 11.3 and today, I decided to upgrade my KDE 4.4.4 to Factory. The update went without a hitch, everything continued to work, including all of the items in my workspace.So now I am running KDE 4.4.95 and it looks nice. I like the new System Settings where the advanced tab is gone and everything is presented in a single window.
The only snag I have hit so far, is that Knetworkmanager no longer displays the network that I am connected to when I right click its icon in the tray. The screenshot may make clear what I am talking about.I am currently connected via a wireless network, which nm-tool confirms. However, it is not shown in the Knetworkmanager menu.
so i cannot install anything because update-info-dir file is missing from /var/lib/dpkg/info/ .. I've searched for the last day and a half for a way to fix this, but nothing. can't even update dpkg because of this. so how do I bypass or fix this so I can install stuff (this is a fresh install of ubuntu 10.04 lts Lucid Lynx).
View 9 Replies View RelatedI have installed qemu/kvm and created a Bridged network connection which works just fine(Windows 7 VM won't work in NAT mode.)
But when I try to use NetworkManager it says that I have no network connection because the network isn't managed, (I set the settings in ifcfg-br0 and ifcfg-eth0 to be managed)
The real problem is that now I can't use my VPN connections (I have many) in NetworkManager.
Is there a way to have both of these pieces of functionality?
I am using FC14
I am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
I remember when using openSUSE 11.3 with KDE 4.5, the network connections started to show the last date used for my "NIC".I am using the plasmoid-networkmanagement plasmoid and KNemo.After I downloaded and installed openSUSE 11.4 64-bit, the network connection no longer shows the last date used. I have set up my card via Yast and Iam connected directly to the Internet. No proxy.To find where this is located, navigate to:Configure Desktop --> Network Settings --> Network Connections --> Wired tab.
View 2 Replies View RelatedI'm trying to get wireless working in F10. Using pci wireless card with Atheros chipset. To be sure, I tested this hardware with a PCLinuxOS Live CD. Connects to AP perfectly.
Hardware drivers seem all OK in F10, and ifconfig shows wlan0 as expected. When I use the Wireless-Assistant 0.5.7 there's no connection.
Actually, the AP logs show numerous connections and disconnections.
Preferring CLI, I'm using a drop-dead simple wpa_supplicant.conf as follows :
Should Ipost some debugging output from wpa_supplicant -Dwext -c/etc/wpa_supplicant/wpa_supplicant.conf -iwlan0 -d
