Ubuntu Networking :: Network Manager - Wireless Connection - Dell Laptop Error Wicd States "Wrong Password" Which Is Not True
Jun 11, 2010
These problems just started the last couple of days but I have been using Lucid 10.04 for a month now. My wireless Signal varies in strength wildly. I sitting at home, not 20 feet from my router. I never had these problems before Ubuntu Lucid Lynx 10.04. I am running both Network Manager and Wicd.
Errors:
1. Wicd states "Wrong Password" which is not true.
2. Dropping off-line for no reason, sometimes 3 or 4 times a minute and sometimes it works fine for hours.
3. Firefox 3.6.3 Automatically Checking "Work Offline"!?
[Code]...
I have the Proper Wireless Drivers. I have not changed my wireless settings, channel or WPA for 8 months now so I know thats not it.
Running ubuntu 10.10 here, brand new install/machine.USB wireless based on a realtek chipset. I spent a few days trying ndiswrapper, and now have the native driver up and running. I can see the network(s) but can't connect. If I encrypt the network, i get a bad password error from wicd network manager (All encypt. methods- Weps, WPA etc) If I open my wireless up with no encryption, i receive a "can't obtain IP" error.
I have a Ubuntu 10.04 laptop that gets its Internet connection via WIFI using WICD as network manager, and Windows XP desktop with no Internet connection. What I want to do is share my Internet connection from my laptop with my desktop via a Ethernet cable. But i have no idea what to do. How do i go about doing this?
I am a first time Linux user - though I've Unix and Windows experience. So though I can follow your most tech instructions, I'll need some hand-holding.
Need help getting my wireless network to work on my newly installed Oracle Linux on Dell laptop.
Not sure what wireless card is installed, or it's mac address (though I can boot into windows and get that info, I don't want to - it'll be kind of a let down if I can't fix it all thru Linux).
Install has detected a Broadcom wired card, but not the wireless. Funny thing is that it detected the Bluetooth.
I have a rtl8192e card and the drivers and everything are set up properly. I can not connect to WEP encrypted networks using network manager. I can however connect using iwconfig and dhcpcd. I uninstalled network manager and installed WICD and have the same problem. It will connect to the access point when it is configured with WPA, but not WEP which we need to use for the other computer. In the status bar of WICD it looks like it is trying to configure the encryption as WPA no matter what I select. I've looked in the config files for WICD and can't see anything that would do it.
I am running Ubuntu 10.04 on a PackardBell notebook and have just got an Orange Livebox 2 for broadband connection(after years of dial-up as no adsl in my area).I am trying to connect via WiFi to the Livebox to configure, but neither NetworkManager nor Wicd will connect. NM sees the Livebox but simply fails to connect after trying; Wicd says "Bad password".The WPA2 password I have entered is definitely correct, and I have connected without any problem from an AcerOne under Linpus.I have also tried to connect using Wicd and an ethernet cable, and this doesn't connect either, returning "Connection Failed: Unable to Get IP Address"
I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
I am using a dell laptop which has Dell 1397 802.11B/G Wireless Mini Card. I not able to connect to internet and was not able to detect what actual problem is weather card is not supported (i.e. drivers are not available) .
Also, if any one can point to exact process to connect to wireless Lan using fedora12.
I'm trying to use wicd instead of network manager because I want a "no fuss" way to use wireless on wmii. However, wicd will not find any networks unless network-manager has been run and has connected to a network since startup. If it hasn't connected to a wireless network, the wicd will find no networks, and iwlist won't provide a list of networks either.
This seems to mean that network-manager is doing something to the interface when it connects that needs to be done to make it usable, but I'm not sure what it is or how exactly to find out. I do know that the interface (eth2) will not appear in ifconfig if network manager hasn't connected, which I assume means that it hasn't been brought up. ifconfig eth2 up makes it show up, but I still can't connect with wicd. What can I do?
I'm running Ubuntu 10.04, generic 2.6.32-22 kernel, MacBook 5,5 using the Broadcom STA driver. (more details below)
I have a laptop ubuntu 9.10 installed and desktop linux mint installed 10. the Wicd would give error bad password and the network manager would just loop and keep asking for key. This worked for me rename the wireless network (ssid) only one word and no caps and it fixed both problems lol!! I guess they don't like multi word {SSid
I had to reinstall WICD to fix another problem, and now it always asks me for my admin password every time I start up.After I enter in the password, it doesn't work.I have tried removing WICD and reinstalling it but that didn't help.I tried searching for a cure to this problem but none of them seemed to have been SOLVED. One post said he solved it but he wasn't clear on HOW he solved it.
I installed 9.10 Karmic 32 bit on a laptop here that has an Atheros 2413 card in it. I could see the network and tried to connect. After 30 seconds of attempting to connect, it simply says disconnected.
Thinking network manager was to blame, I installed WICD and rebooted. I tried to connect to my network, but it came back with unable to get IP address. Okay, fine. So I check my iBook and Ubuntu work laptop both are connected fine. I tried other drivers within the WICD preferences wext, ndiswrapper, madwifi nothing worked. I power cycled the router thinking something might have been borked with my wireless but it's fine.
I am getting trouble with knetwork manager. I created a new connection by scanning and connecting using knetwork manager. But every time connection gets disconnected and ask for password and again it connects.
I thought to uninstall Gnome Network manager since it was always asking for to connect with wireless internet but it was working fine with wired internet.I uninstalled it and installed wicd. and then for some unknown reasons the internet disappeared.Kindly let me know How can i get back network manager without having internet and make internet work on my computer.I did searched a lot on Ubuntu forums using somone's else computer but no success.So if you let me know how to approach the problem in right manner it shal be great .
I have the required drivers from this website: Broadcom.com - 802.11 Linux STA driver As far as I can tell I have followed all the instructions given by the readme, I have all kernel packages that I had understood to be required but when I try to make the Makefile I am given this:
borgs0@linux-yjl1:~/hybrid_wl> make KBUILD_NOPEDANTIC=1 make -C /lib/modules/`uname -r`/build M=`pwd` make[1]: Entering directory `/lib/modules/2.6.34-12-desktop/build' make[1]: *** No targets specified and no makefile found. Stop. make[1]: Leaving directory `/lib/modules/2.6.34-12-desktop/build' make: *** [all] Error 2
Our corporate wireless network uses continuously changing passwords with RSA tokens.So every time we need to connect to the wireless we need to enter a new password off the RSA token. For extra fun using the wrong password a couple of times in a row causes the users account to be locked.Network manager automatically stores and reuses the password, with the net result that it is constant getting my account locked.Is there some way to prevent it from storing my password for that network?
I connect to the WPA2-secured wifi of a university. They use 802.11b/g on the 2.4 GHz band and 802.11a/n on the 5.2 GHz band. Both have the same SSID xyz (for roaming).Now, when I connect to the SSID xyz, ubuntu 11.04 (natty) chooses the Access Point with the highest Strength. However, this is a 802.11g Access Point which is very slow because of high usage and there is no 802.11n available. Slow pings make it unusable.network-manager is just too stupid to connect to the much faster 5GHz 802.11n AP.Windows 7 autmatically connects to the 5GHz 802.11n Adapter with 300Mbit/s. That's what I would expect from ubuntu as well. I think Mac OS X also performs great in such situations.
The only workaround for me is to enter the BSSID (Mac-Address) of the 5 GHz AP directly in network-manager. That works and I have 802.11n with up to 300 Mbit/s. However, this is not the perfect solution, because now I can't use roaming any more (we have lots of APs here!).Do you have any Ideas to prefer 5 GHz band over 2,4 GHz band? I also tried the "band" gconf option as well as kernel module options of module iwlagn with no success.
My wife's laptop is Dell Inspiron 6400 running 11.04. Wireless has recently stopped working. Running rfkill list all shows dell-wifi hard blocked no soft blocked no. The fn plus F2 keys toggle status between blocked no and blocked yes, but network manager still can't see network. I've tried removing the Broadcom STA driver - no joy.
I have two linux laptops. Currently, I'm using both of them at work, side-by-side. Now the problem is, I'm connected to a wireless router, but the wireless only works on one of the laptops. So I'm stuck with one laptop that has no access to the internet. Both machines do, however, have working ethernet nic cards. So, I was wondering if I could use the laptop with the wireless connection to share the internet connection with my other linux machine and access the internet on both of them. Or as an alternative, just use the internet on the machine without wireless and be able to switch back and forth, that would increase my productivity like 30 fold.
have Unix and Windows experience. So will need some hand-holding.Need help getting my wireless network to work on my newly installed Oracle Linux on Dell laptop.Not sure what wireless card is installed, or it's mac address (though I can boot into windows and get that info I don't want to - it'll be kind of a let down if I can't fix it all thru Linux).Install has detected a Broadcom wired card, but not the wireless. Funny thing is that it detected the Bluetooth
I am running Ubuntu 10.04 on a PackardBell notebook and have just got an Orange Livebox 2 for broadband connection(after years of dial-up as no adsl in my area).
I am trying to connect via WiFi to the Livebox to configure, but neither NetworkManager nor Wicd will connect. NM sees the Livebox but simply fails to connect after trying; Wicd says "Bad password". The WPA2 password I have entered is definitely correct, and I have connected without any problem from an AcerOne under Linpus.
I have also tried to connect using Wicd and an ethernet cable, and this doesn't connect either, returning "Connection Failed: Unable to Get IP Address"
I have installed WICD on Debian . I can now access a new a Network Manager screen, which did not exist before, but it does not display/detect any wireless networks. It is like dead. Before installing WICD I did at least have a wireless WPE encrypted network, which was detected, although it often disconnected for no known reasons. Now even that Network has gone and I can't go on line. Can anybody help here? How can I configure the WICDNetwork Manager to detect an existing network or create a new one? In the latter case, would I have to reconfigure the Router settings to setup/connect to a network in Debian? May be I have to do this, because Tor/Vidalia changes my IP address and so my Network Adapter ( Linksys) can no longer connect to the router. Also, when trying to follow troubleshooting leads in this connection, the Terminal screen on Debian ( CMD) would often return a PERMISSIONS DENIED message.
I use network Manager to connect to wireless broadband on Fedora 12.Are there any tools that can provide me logs about connection times, bandwidth monitoring etc.Basically, I need logs like what kppp provides with accounting.
I can use kppp to connect and get the logs I need but I want to connect to the network as soon as I plug it in - Only Network Manager allows this.
how to switch to it because i keep getting my connection dropped with the default network manager. he said to make sure i was plugged in via ethernet, purge network manager - then apt-get WICD. the problem is, not even ethernet works once network manager is purged.
so - before i try this i wanna know, can i just download WICD before hand, then purge network manager, then install WICD. OR, can i just install WICD now, then once i purge network manger it will move over to WICD as the default?
how should i go about changing to WICD?
it has to be a driver thing, its happened on multiple installs - on network manager and on WICD
it usually happens (or at least more often) when im streaming a live feed from a website, and it doesnt reset itself unless i turn the computer OFF (not restart) and back on
basically what happens is, with both the network manager and WICD - the wireless just cuts out and stops detecting any network at all, disconnected. i have tried terminating the process and restarting the applications via terminal or run command; i dont know what to do it just keeps happening. sometimes it wont happen for 2 days, sometimes it happens five times in one day.
it really seems to be affected by what im doing on, sometimes i'll have multiple videos going and it starts to chug, and i know when its gonna happen - wifi cuts out. it doesnt DROP, it just stops working, detecting networks.
like i said, even restarting doesnt fix this. i have to quit the application, turn the computer on and off - then boom its right back on when it comes back.
so strangeeee.
so far i've had 3 ubuntu problems in the week i've had it.
1. this
2. "couldnt update .ICEauthority" at login
3. and this made me have to reinstall yesterday - nothing i would install would run anymore, no errors, no processes - i just click the icons and nothing happens.
