Fedora Networking :: Server Not Show Up On Network Places
Jan 9, 2011
I have a simple problem where Windows machines can connect to shares on my Fedora server (via SAMBA), but only when using the IP address. When Windows users to go Network (in Vista and 7) or Network Places (XP), then all computers on the network show up in that window except for the Fedora server. How can I get my server to appear in that space? Although I can connect via IP address, we are using some programs that can only find shares by the computer name (aka if it's found in the Network window). I have checked and rechecked that the workgroup name is indeed correct.
View 3 Replies
ADVERTISEMENT
Jan 27, 2011
Removed hard drive from our office server to check model number (windows pc). reinstalled same hardrive and now i can't connect to server from the network (MAC). it gives me error code -43.
View 9 Replies
View Related
Jun 8, 2011
Is there a command that display all network info. I'm looking for ip address, subnet mask, gateway, and dns. If there isn't a single command could someone please write me a shellscript that can do this?
View 3 Replies
View Related
Feb 4, 2011
I installed Ubuntu Server 10.10 today on an old laptop. I then used webmin to configure it and enabled windows networking, the laptop is in the same workgroup as another win7 laptop and a win xp desktop. However, I can't see the server in My network places.
View 9 Replies
View Related
Sep 1, 2010
This may fall under the "ain't broke don't fix it" category but it's driving me nuts. I've got the Broadcom 4322 wireless adapter in my laptop and it works fine with broadcom-wl driver and kmod. However there is no ifcfg-eth1 file and the card does not show up in system-config-network.
View 2 Replies
View Related
Apr 19, 2011
Read my Linux distribution from my user data. I have configure different network places bookmarks but accidentally, I introduced the wrong username in that one, thus it is listed as a bookmark for a network place, but it will not connect. How do I erase these bookmarks?
View 1 Replies
View Related
Nov 27, 2010
Using places>networking. Tried to drag files from windows to ubunto: works ok
Tries to drag from ubunto to windows, getting there was an error copying the file to smb://<computer name>/<folder name>/permission denied
Ubuntu 10.04, Windows Vista home premium
View 5 Replies
View Related
Apr 18, 2011
p { margin-bottom: 0.08in; } I have been using a dual boot with Vista and Ubuntu 10.10 successfully some time now. Today my computer shut down unexpectedly when I in Vista. When I rebooted my Ubuntu partition had totally disappeared. I booted from a Ubuntu CD and the partition did not show under Places, and when I brought up the disk utility it didn't show there either. The Windows partition did show in both places. Below is the output from the boot_info_script. How to restore my missing partition.
Boot Info Script 0.55 dated February 15th, 2010
Boot Info Summary:
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in partition #5 for (,msdos5)/boot/grub.
sda1:
File system: ntfs
Boot sector type: Windows Vista/7
Boot sector info: No errors found in the Boot Parameter Block.
Operating System: Windows Vista
Boot files/dirs: /bootmgr /Boot/BCD /Windows/System32/winload.exe
/ntldr /NTDETECT.COM
Drive/Partition Info:
Drive: sda
Disk /dev/sda: 750.2 GB, 750156374016 bytes
255 heads, 63 sectors/track, 91201 cylinders, total 1465149168 sectors
Units = sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
Partition Boot Start End Size Id System
/dev/sda1 * 63 1,465,127,999 1,465,127,937 7 HPFS/NTFS
blkid -c /dev/null:
Device UUID TYPE LABEL
/dev/loop0 squashfs
/dev/sda1 DCD83195D8316F40 ntfs Windows Disk
/dev/sda: PTTYPE="dos"
"mount | grep ^/dev output:
Device Mount_Point Type Options
aufs / aufs (rw)
/dev/sr0 /cdrom iso9660 (ro,noatime)
/dev/loop0 /rofs squashfs (ro,noatime)
View 4 Replies
View Related
May 5, 2011
I have a smoothwall box I can ssh into via places --> Connect to server. I have built a ipcop box to replace it with the same ip but can't seem to ssh into it. I get this when I try the following at the terminal:
[Code]....
View 2 Replies
View Related
Oct 20, 2010
Ubuntu 10.04 x64 desktop. We have a NAS with several shared directories. They mount fine using manual "Connect to Server" using the SMB protocol. I assigned "Bookmarks" on connection so that I can recall them more easily when needed. The shared drives appear under "Places" with the more user friendly Bookmarks for each share appearing after the line divider in File Manager. This is all splendid.
However, when for example wanting to attach a file from a mapped shared drive when writing an email in Gmail (in either Firefox or Chromium), the "File Upload" window that opens DOES NOT show any mapped shared drives or Bookmarks making it impossible to attach anything from a shared drive. how to fix this rather bizarre behaviour since it is severely limiting the usefulness of centralizing our files on a NAS if I cannot attach shared files to emails.
Drag and drop also does not work. Firefox ignores them while Chromium says "This file is 0 bytes, so it will not be attached." I just successfully attached the same files in Chrome running on a Windows 7 machine in Virtualbox. This is both amazing, and somewhat embarrassing. How to do this from within Ubuntu 10.04 so that I do not have to resort to running a Windows machine just so that I can attach shared files
View 2 Replies
View Related
Apr 22, 2010
I just got Ubuntu and I feel like there is going to be a really simple solution but right now I cannot find any information on a solution. I run 9.10 desktop i386 or w/e and I have a wireless connection. The network does not show up when I go the network manager to select a network. No networks show up and all it lets me do is create a new network connection which I have no idea how to do. I think it might have to do with my device recognition, but the network is fine it is just Ubuntu.
View 4 Replies
View Related
Apr 28, 2011
I use Wicd 1.7.0 to manage my wired/wireless network connections and it worked well with Ubuntu 10.10. Now that I upgraded to 11.04 the wireless indicator does not show up on the top bar, even though the wireless is connected and working. I have no way to see my connection, or view available wireless connections. I looked through system settings, but don't see any options for selecting what shows up on the top bar.
View 8 Replies
View Related
Sep 11, 2010
I'm trying to search for more wireless networks but i cannot find a way to make network manager search for more wireless networks. It only displays 2 wireless networks and none of them is mine, even though I've got my wireless router at less than 1 meter from my PC.
View 2 Replies
View Related
Sep 1, 2011
I'm on Windows 7 64bit and Ubuntu 11.04 64bit.Windows is on a net book with not so much hard drive space so I want to keep all my music and movies on my hard drive of my Ubuntu desktop. When I try to find my Ubuntu machine I get nothing though..No matter what though, Win7 simply will not see it on the network. Not even when I run "\ipadress"..If anything is there away to delete everything related to Samba and start over?
View 3 Replies
View Related
Feb 10, 2010
I deleted all APs in my Wireless Section of network manager. After that, the whole network manager icon disappeared. I added the icon back on the panel, but I don't think its the right one. It doesn't do the two green cicles thing when I connect my ethernet wire in. It also doesn't show any wireless AP when I left click on the icon. It doesn't even have an X mark on the bottom left of the icon when no network is detected
View 1 Replies
View Related
Jun 8, 2010
im just getting the hang of ubuntu 9.10, and then all of a sudden 10.04 comes over and screws everything up with the upgrade. i did the upgrade, and now the network manager wont show up in notification areas. any clue as to why? help is greatly appreciated. also, my machine does register that the drivers for wireless card is installed, and when i run lshw -c net command with sudo priveleges, it says it can detect networks, so im confused as hell.
View 9 Replies
View Related
Jul 8, 2010
I have been routing network traffic based on MAC addresses, so we can distribute traffic evenly over a series of WAN IP addresses.Everything seems to be going well, but I have a very curious problem. One of the users can connect to the network without problem, but I don't see him in my network administration application (neither his MAC address or leased IP address).At the same time, I'm trying to identify other unknown computers on my network based on MAC addresses I don't have on file.
View 4 Replies
View Related
May 16, 2011
is there any tool (terminal command preferably) which can show the frequency and the type of the connected mobile broadband network. I mean HSDPA/GPRS etc and 900/2100MHz. At my country there are 2 frequencies used for UMTS, 900MHz for rural areas and 2100MHz for urban and I need to know what type is the connection and what is the used atm frequency. I am using wvdial for connecting to the internet.
View 2 Replies
View Related
Feb 12, 2009
I have installed Fedora 10 on my A860 Dell Vostrol Laptop with AR242X Atheros Wireless card. Wireless card worked out of the box and i could detect wireless network and connect to it. But i have a problem that, my wireless connection is not able to get IP address from the DHCP server. Please help me out what can i do to get this working. I am using WEP security and authentication is open system.
I have windows 7 beta installed on the same machine and on that wireless network works fine so i am sure that there is no problem with the wirless network. I am using DIR-300 router from D-LINK. I tried to see packet log on wireshark and there i see that there is no reply to the DHCP discover message. Actually i don't see any RX packets at all. Which is not normal as there is traffic on the network.
View 14 Replies
View Related
Mar 29, 2009
how to setup a home network for learning purpose. i have two laptops and a desktop connected to a modem-router for broadband (wired connection), i want to setup one as server and the others as client.
View 2 Replies
View Related
Sep 5, 2009
I've set up a caching nameserver on my laptop running Fedora 11. The problem with this is that NetworkManager always overwrites the entry that points to the local nameserver. NetworkManager no longer respects /etc/dhclient.conf or at least its scripts run after dhclient.conf. Also it doesn't respect /etc/sysconfig/ network-scripts/ifcfg-* setting of DNS{1.2}.The man page of NetworkManager describes scripts that run in /etc/NetworkManager/dispatcher.d which can be run when interfaces are brought up and down. I've written a script that will put the entry needed for the local nameserver.
View 1 Replies
View Related
Apr 29, 2011
Our F14 server is looses access to the network once we set a static IP.The same IP, if used on any other pc works fine.We had the same exact setup in our F10 server also.
View 9 Replies
View Related
Jan 21, 2011
Ive installed Ubuntu recently but none of my attempts to get the wifi network working were successfull. It establishes connection but the indicator shows no signal and I cant connect to any website, I tried pinging external IPs etc. None of these worked. lspci -nn | grep 'Wireless Brand'Does not show anything. I could find 03:00:0 Network Controller: Intel Corporation Ultimate N WiFi Link 5300 lsmod | grep "wlan_module_name"Doesnt show anything. Restarting network says only: *Reconfiguring network interfaces... Kernel boot messages:
[Code]....
The network Im trying to connect to is hidden, so I have to input SSID manually, I doubt this causes the problem.
View 2 Replies
View Related
Feb 7, 2010
I am setting up Apache (Fedora 12) inside my home network. From inside my home network I access it without any problem. I need to set it up to access it from internet. I have the following questions. Here is temporary setup for testing purpose.
Internet-->ADSL modem (SEIMENS Speed Stream 4200)---> Apache (Fedora 12)
1. Do I have to do any kind of ports forwarding on ADSL modem. (There is no option to do port forwarding on Modem) May be I need different Model of Modem??
2. I tired to Ping my real IP for modem form another computer from internet. I am even unable to PING the ADSL 's real IP. Why it is that?
View 6 Replies
View Related
Dec 1, 2010
I'm running ubuntu maverick and i'm having issues with some things.First off, Alt+F2 no longer opens the Run Dialog. I have checked the keyboard shortcuts and settings and re-entered the command but it still doesn't work. I also checked the compiz settings for gnome compatibility. The odd thing is that all of my other Function key shortcuts work, just not Alt+F2 Not sure what else to try.
Next, I am not able to open Network in Places. I click it, then I get a loading icon for half a second then nothing opens. Also, when I click Places > Connect to Server, the only option that I have is custom location. The issue with this is that I used to have several other options like FTP, SSH, Windows Share, etc.
View 1 Replies
View Related
May 24, 2010
I'm using a D-Link Xtreme N PCI express wireless adapter (DWA-556). It shows up in the network manager.
However it does not get an ip address from the DHCP server. Below is what I get in the messages log:
View 1 Replies
View Related
Feb 22, 2011
I'm having problems connecting to our network time capsule the capsule appears in my network places and I can open it up but there are no files present. However when on my house mates Mac there are many different file types present. At first I thought it may be a formatting problem but the files can be accessed from a windows machine also.
View 1 Replies
View Related
Mar 24, 2011
I did set samba server up. I just modified only one configuration from default /etc/samba/smb.conf file.
Just workgroup = MSHOME to workgroup = WORKGROUP.
And browseable = yes.
Beacuse my xp workgroup is WORKGROUP. So I changed as same workgroup name
both unbuntu and XP.
But I couldn't find samba pc on network places at XP. I have started smbd and nmbd already. There is a ridiculous something. I can access samba at XP only typing \samba IP address. But why I can't see at network places. I am using ubuntu 10.04 TL.
View 1 Replies
View Related
Aug 7, 2011
I am trying to permanently integrate a windows network drive into my Ubuntu 11.04. I don't have Nautilus - I am using Rox Filer instead. I am trying to get this job done according to this link here (Method 2): [URL]. I want to integrate the network drive as described in Method 2, but I don't have Places->Network. Is there a way I could do this without Nautilus?
View 1 Replies
View Related
Jul 29, 2010
I have a laptop with Redhat 5 installed and a Windows 7 Virtual Machine. The laptop is connected to the internet but I cant access any web pages in firefox - it just comes up with Server Not Found (tried all different sites). I know the internet connection is good as if i go into my windows VM firefox works normal. Ive checked the network settings and tried setting to 'no proxy' and automatically detect but nothing seems to work. Ive uninstalled and reinstalled firefox and still get the same.
Ive tried both wired and wireless but makes no difference. Seems really weird that it works in the Windows VM but not in Redhat which its booting into.
View 1 Replies
View Related
