I have a laptop ubuntu 9.10 installed and desktop linux mint installed 10. the Wicd would give error bad password and the network manager would just loop and keep asking for key. This worked for me rename the wireless network (ssid) only one word and no caps and it fixed both problems lol!! I guess they don't like multi word {SSid
View 1 RepliesI recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
I'm trying to use wicd instead of network manager because I want a "no fuss" way to use wireless on wmii. However, wicd will not find any networks unless network-manager has been run and has connected to a network since startup. If it hasn't connected to a wireless network, the wicd will find no networks, and iwlist won't provide a list of networks either.
This seems to mean that network-manager is doing something to the interface when it connects that needs to be done to make it usable, but I'm not sure what it is or how exactly to find out. I do know that the interface (eth2) will not appear in ifconfig if network manager hasn't connected, which I assume means that it hasn't been brought up. ifconfig eth2 up makes it show up, but I still can't connect with wicd. What can I do?
I'm running Ubuntu 10.04, generic 2.6.32-22 kernel, MacBook 5,5 using the Broadcom STA driver. (more details below)
Code:
*-network
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth2
version: 01
serial: 00:25:00:4b:df:4c
[Code]...
I had to reinstall WICD to fix another problem, and now it always asks me for my admin password every time I start up.After I enter in the password, it doesn't work.I have tried removing WICD and reinstalling it but that didn't help.I tried searching for a cure to this problem but none of them seemed to have been SOLVED. One post said he solved it but he wasn't clear on HOW he solved it.
View 1 Replies View RelatedI installed 9.10 Karmic 32 bit on a laptop here that has an Atheros 2413 card in it. I could see the network and tried to connect. After 30 seconds of attempting to connect, it simply says disconnected.
Thinking network manager was to blame, I installed WICD and rebooted. I tried to connect to my network, but it came back with unable to get IP address. Okay, fine. So I check my iBook and Ubuntu work laptop both are connected fine. I tried other drivers within the WICD preferences wext, ndiswrapper, madwifi nothing worked. I power cycled the router thinking something might have been borked with my wireless but it's fine.
Running ubuntu 10.10 here, brand new install/machine.USB wireless based on a realtek chipset. I spent a few days trying ndiswrapper, and now have the native driver up and running. I can see the network(s) but can't connect. If I encrypt the network, i get a bad password error from wicd network manager (All encypt. methods- Weps, WPA etc) If I open my wireless up with no encryption, i receive a "can't obtain IP" error.
View 1 Replies View RelatedI have a Ubuntu 10.04 laptop that gets its Internet connection via WIFI using WICD as network manager, and Windows XP desktop with no Internet connection. What I want to do is share my Internet connection from my laptop with my desktop via a Ethernet cable. But i have no idea what to do. How do i go about doing this?
View 3 Replies View RelatedI have ~20 log entries/second in syslog
Code:
nm-pptp-service-1078 log[decaps_gre:pptp_gre.c:414]: buffering packet 57467 (expecting 57429, lost or reordered)
[code]....
I thought to uninstall Gnome Network manager since it was always asking for to connect with wireless internet but it was working fine with wired internet.I uninstalled it and installed wicd. and then for some unknown reasons the internet disappeared.Kindly let me know How can i get back network manager without having internet and make internet work on my computer.I did searched a lot on Ubuntu forums using somone's else computer but no success.So if you let me know how to approach the problem in right manner it shal be great .
View 6 Replies View RelatedThe university I go to uses a WPA2 wireless network that requires a netID and password to connect too. I installed wicd but I can't seem to connect to this network, is there a way to add this functionality to wicd, and if so, how do I do that (links to a how-to or guide would be nice, I've yet to find one).
Also, I spend most of my time on campus in the command line, so I'd like to know if there is a way to use command line utilities to connect to this network (again, a guide or how-to would be nice)
I can get online through my fedora live USB just fine (w/ network manager) but I'd rather get on directly from slackware.
I have installed WICD on Debian . I can now access a new a Network Manager screen, which did not exist before, but it does not display/detect any wireless networks. It is like dead. Before installing WICD I did at least have a wireless WPE encrypted network, which was detected, although it often disconnected for no known reasons. Now even that Network has gone and I can't go on line. Can anybody help here? How can I configure the WICDNetwork Manager to detect an existing network or create a new one? In the latter case, would I have to reconfigure the Router settings to setup/connect to a network in Debian? May be I have to do this, because Tor/Vidalia changes my IP address and so my Network Adapter ( Linksys) can no longer connect to the router.
Also, when trying to follow troubleshooting leads in this connection, the Terminal screen on Debian ( CMD) would often return a PERMISSIONS DENIED message.
how to switch to it because i keep getting my connection dropped with the default network manager. he said to make sure i was plugged in via ethernet, purge network manager - then apt-get WICD. the problem is, not even ethernet works once network manager is purged.
so - before i try this i wanna know, can i just download WICD before hand, then purge network manager, then install WICD. OR, can i just install WICD now, then once i purge network manger it will move over to WICD as the default?
how should i go about changing to WICD?
it has to be a driver thing, its happened on multiple installs - on network manager and on WICD
it usually happens (or at least more often) when im streaming a live feed from a website, and it doesnt reset itself unless i turn the computer OFF (not restart) and back on
basically what happens is, with both the network manager and WICD - the wireless just cuts out and stops detecting any network at all, disconnected. i have tried terminating the process and restarting the applications via terminal or run command; i dont know what to do it just keeps happening. sometimes it wont happen for 2 days, sometimes it happens five times in one day.
it really seems to be affected by what im doing on, sometimes i'll have multiple videos going and it starts to chug, and i know when its gonna happen - wifi cuts out. it doesnt DROP, it just stops working, detecting networks.
like i said, even restarting doesnt fix this. i have to quit the application, turn the computer on and off - then boom its right back on when it comes back.
so strangeeee.
so far i've had 3 ubuntu problems in the week i've had it.
1. this
2. "couldnt update .ICEauthority" at login
3. and this made me have to reinstall yesterday - nothing i would install would run anymore, no errors, no processes - i just click the icons and nothing happens.
These problems just started the last couple of days but I have been using Lucid 10.04 for a month now. My wireless Signal varies in strength wildly. I sitting at home, not 20 feet from my router. I never had these problems before Ubuntu Lucid Lynx 10.04. I am running both Network Manager and Wicd.
Errors:
1. Wicd states "Wrong Password" which is not true.
2. Dropping off-line for no reason, sometimes 3 or 4 times a minute and sometimes it works fine for hours.
3. Firefox 3.6.3 Automatically Checking "Work Offline"!?
[Code]...
I have the Proper Wireless Drivers. I have not changed my wireless settings, channel or WPA for 8 months now so I know thats not it.
Removed Network Manager (Wicd) - Now Can't Connect To Internet
View 1 Replies View RelatedI have a rtl8192e card and the drivers and everything are set up properly. I can not connect to WEP encrypted networks using network manager. I can however connect using iwconfig and dhcpcd. I uninstalled network manager and installed WICD and have the same problem. It will connect to the access point when it is configured with WPA, but not WEP which we need to use for the other computer. In the status bar of WICD it looks like it is trying to configure the encryption as WPA no matter what I select. I've looked in the config files for WICD and can't see anything that would do it.
View 3 Replies View RelatedI have stop using debian some months but I decide to come back. Yesterday I have make a clean install of debian squeeze. The network manager never rember my wireles password. Every time I open the pc it ask me the keyring password and the wireles password. Why network manager can't rember my passwords? Also I have a strange problem when I try to gain root acces. If I try to open synaptic or to mount a ntfs partion it ask me the root password but every time I type my root pass it says that its incorrect but I am absolutely sure that I type my root pass correct. Also if I try to gain root acces from terminal with su its became the same thing but after some tries it takes my pass as corect. So every time I type my root pass from a gui like gksu it always says that is incorect but if I type my pass in terminal it take it correct after some tries. In the past I have again installed the debian from the same cd on the same pc but I had never those problems. What can be wrong?
View 6 Replies View RelatedI have a dell insp 1545 windows7-ubuntu9.10 dual boot. the linux os would not activate the wireless network function in the network manager (but the cricket broadband was being detected and was in fact active). well, i did a little looking around and found another network mgr (wicd?, i think it's called... or something like that) and installed it. IT is working, but now the cricket broadband is down, which is my mainstay internet connection right now. i'm thinking that maybe it's got something to do w/the flipflop.sh function but that's just a wild guess.
View 1 Replies View RelatedBecause of some glitches I've experienced with Knetwork Manager as of recent versions of Kubuntu I want to use WICD but I know they can get a bit botched juggling them around. I remember getting it right once using a wired connection ot install but would like ot be clear in advance of doing this tomorrow.
View 1 Replies View RelatedI use Wicd 1.7.0 to manage my wired/wireless network connections and it worked well with Ubuntu 10.10. Now that I upgraded to 11.04 the wireless indicator does not show up on the top bar, even though the wireless is connected and working. I have no way to see my connection, or view available wireless connections. I looked through system settings, but don't see any options for selecting what shows up on the top bar.
View 8 Replies View RelatedI'm using Debian Lenny and installed wicd package.It does not ask me for the credentials and i can't find where to define them?!
View 1 Replies View RelatedI am trying to use nm-applet with Arch/Openbox/tint2. I can't use wicd-gtk because wicd won't work with ad-hoc networks. I have tested nm-applet in Ubuntu/Openbox/tint2 and it works fine.
The error message is:
Code:
[esteeven@piccolo ~]$ nm-applet
** Message: applet now removed from the notification area
[Code]...
I was trying to set my wireless to start up when the computer is booted like the regular ethernet eth0 but I can't figure out how to set the WPA pass phrase with system-config-network
View 2 Replies View RelatedI set up a bridge device but I can not figure out how to pass parameters into the ifcfg-vmbr0 in particular I need to pass:
maxage
ageing
fd and stp seems to be passed by DELAY=0 and STP=on the others? I have not found anything in the post, tips, docs how could I do?
I made a script to backup file from each host with general password in local network. This script using SSH Pass and Rsync with this
syntax:
rsync --rsh="sshpass -p password ssh -l root" hostath destinationpath
Everything is okay under 9.10 version until I migrate to Ubuntu 11.04, there is always give an error:
rsync error: received SIGINT, SIGTERM, or SIGHUP (code 20) at rsync.c(541) [Receiver=3.0.7]
I am using bash version: GNU bash, version 4.2.8(1)-release (i686-pc-linux-gnu) and 2.6.38-8-generic kernel
I replaced the trusty old aironet wireless card with a trendnet scanbus wireless card so I could secure my home wireless with wpa encryption. It uses the ath5k module, and the wireless is set up with wicd. The issue is that if I stop browsing for about 2 minutes, the next time I start to browse, it will disconnect, then reconnect no problem. I don't know if this is supposed to be a feature, but it is sure annoying. Is there a tweak somewhere to stop this? The other option would be to use ndiswrapper and use windows drivers, but I'd rather explore tweaking, if possible. If I have to use ndiswrapper, would I have to rmmod ath5k first, or would it be ok to use ndiswrapper directly?
View 2 Replies View RelatedI recently fixed an annoying problem and I thought it would be nice to share my solution here. The problem was that after a cycle of suspend/resume, Network Manager would only auto-connect to the same network as it was previously connected to. So, for example, if I suspended my laptop at home, and then I went to school and resumed it, it would try to connect to the home network, and then just give up. It would not connect to the school network unless I explicitly told it to.irst, I'll describe the fix. If you're having this problem, you can this. Copy the following:
Code:
#!/bin/sh
case "$1" in
[code]....
I am a Windows refugee who discovered Ubuntu as a way to save my files from my virus-ravaged computer. Had no installation discs for Windows, so when I had to wipe my hard drive and start over, I decided to give Ubuntu a try. I've had mixed success, but that's another post...
Right now, the problem is that I installed 10.10 two weeks ago and was able to connect to the Internet with no problems - until yesterday. Suddenly, our wireless network (the only one in the vicinity) does not come up as available in Network Manager. In fact, the entire wireless option disappeared. I know there are many posts and threads on here about this, but weeding through them trying to find an answer is more frustrating than actually dealing with the problem. I know the router works because I can post on this forum from the Macbook. I really like Ubuntu and would like to keep using it, but not being able to connect to the Internet now on top of the other issues I've had is making me doubt I want to continue down this Linux road.
P.S. When I attempted an analysis through System Testing, it said something about there being no proprietary drivers?
I have used ubuntu in the past but had a lot of hardware issues with it and unfortunately moved back to windows (( BUT i have tried Ubuntu again and all seems to work great except wifi My wifi connection is sort of working because when i run SUDO IWLIST SCAN it does pull up all available networks. But in the network manager icon on the panel i left click but i see no networks and can't connect to anything. I WOULD LOVE TO keep Ubuntu and use it permanently but I must get wifi working or else this won't be possible.
View 4 Replies View RelatedI have the problem with my notebook, that, after I used it at work, the network-manager always tries to autoconnect after boot. He has no cable network and so I get the message "not connected" after a while.how to tell the network-manager, not to autoconnect each time?
View 4 Replies View RelatedMy wifi connection drops sometimes and, for some reason, Network Manager attempts to connect to my neighbor's network, which requires a password (which I don't know). Is there any way to blacklist a wireless network so that the Network Manager will never attempt to connect to it?
View 4 Replies View Related