Networking :: Use Wicd To Authenticate In A 802.1x Network (cable)?
Sep 9, 2009I'm using Debian Lenny and installed wicd package.It does not ask me for the credentials and i can't find where to define them?!
View 1 Replies
ADVERTISEMENT
Ubuntu Networking :: Network-manager And Wicd Can See But Not Connect To Network
Jul 10, 2010I recently put Linux on a Thinkpad T40 I got. The wireless card works out of the box--I can see nearby networks. However, I can't connect to mine. network-manager would try (spin spin spin), fail, ask for the password, and then go back to the beginning and repeat indefinitely. This happened to me on a different computer, and on that one all I had to do was use wicd instead of network-manager. So I installed wicd, but it's not working either--it hangs at "Obtaining IP address".
I've found many, many threads with people who had the same problem, but none of their fixed worked for me.
I also tried to get wifi going manually, using this guide, but that didn't work.
Networking :: Can't Authenticate To WPA Network?
Aug 22, 2010I have a TP-Link Atheros-based USB card: TL-WN422G. It's listed widely as being compatible, but I'm baffled if I can make it work.I'm running an ndiswrapper (XP-64) driver, and that seems to be loaded and recognizing the hardware correctly. The system can scan and correctly identify our network, and other nearby ones, but when the WPA key is entered (correctly, I've triple checked), the "Secrets" windows just keeps popping up and no IP is acquired. I've installed and tried toi configure it with wpa-supplicant, all to no avail.ched below a (long, sorry) list of various outputs that I've looked at
Ubuntu 10.04.1 LTS (Kubuntu); 2.6.32-24-server x86_64
output of lsusb
Bus 002 Device 002: ID 0040:073d
[code]....
Ubuntu Networking :: Cannot Authenticate To WPA Network
Aug 22, 2010I have a TP-Link Atheros-based USB card: TL-WN422G. It's listed widely as being compatible, but I'm baffled if I can make it work. I'm running an ndiswrapper (XP-64) driver, and that seems to be loaded and recognizing the hardware correctly. The system can scan and correctly identify our network, and other nearby ones, but when the WPA key is entered (correctly, I've triple checked), the "Secrets" windows just keeps popping up and no IP is acquired. I've installed and tried to configure it with wpa-supplicant, all to no avail.
I've attached below list of various outputs that I've looked at.
Ubuntu 10.04.1 LTS (Kubuntu); 2.6.32-24-server x86_64
output of lsusb
Bus 002 Device 002: ID 0040:073d
Bus 002 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 001 Device 003: ID 0413:6029 Leadtek Research, Inc.
Bus 001 Device 002: ID 0cf3:1006 Atheros Communications, Inc.
Bus 001 Device 001: ID 1d6b:0002 Linux Foundation 2.0 root .....
Ubuntu Networking :: WICD Will Not Connect Without Network-manager?
Jul 23, 2010I'm trying to use wicd instead of network manager because I want a "no fuss" way to use wireless on wmii. However, wicd will not find any networks unless network-manager has been run and has connected to a network since startup. If it hasn't connected to a wireless network, the wicd will find no networks, and iwlist won't provide a list of networks either.
This seems to mean that network-manager is doing something to the interface when it connects that needs to be done to make it usable, but I'm not sure what it is or how exactly to find out. I do know that the interface (eth2) will not appear in ifconfig if network manager hasn't connected, which I assume means that it hasn't been brought up. ifconfig eth2 up makes it show up, but I still can't connect with wicd. What can I do?
I'm running Ubuntu 10.04, generic 2.6.32-22 kernel, MacBook 5,5 using the Broadcom STA driver. (more details below)
Code:
*-network
description: Wireless interface
product: BCM4322 802.11a/b/g/n Wireless LAN Controller
vendor: Broadcom Corporation
physical id: 0
bus info: pci@0000:03:00.0
logical name: eth2
version: 01
serial: 00:25:00:4b:df:4c
[Code]...
Ubuntu Networking :: Wicd Network Indicator Does Not Show Up
Apr 28, 2011I use Wicd 1.7.0 to manage my wired/wireless network connections and it worked well with Ubuntu 10.10. Now that I upgraded to 11.04 the wireless indicator does not show up on the top bar, even though the wireless is connected and working. I have no way to see my connection, or view available wireless connections. I looked through system settings, but don't see any options for selecting what shows up on the top bar.
View 8 Replies View RelatedUbuntu Networking :: Wicd Bad Pass Word - Network Manager Keeps Asking For Key?
Dec 31, 2010I have a laptop ubuntu 9.10 installed and desktop linux mint installed 10. the Wicd would give error bad password and the network manager would just loop and keep asking for key. This worked for me rename the wireless network (ssid) only one word and no caps and it fixed both problems lol!! I guess they don't like multi word {SSid
View 1 Replies View RelatedUbuntu Networking :: WICD Network Manager Needs Administrative Priviledges
Jan 4, 2011I had to reinstall WICD to fix another problem, and now it always asks me for my admin password every time I start up.After I enter in the password, it doesn't work.I have tried removing WICD and reinstalling it but that didn't help.I tried searching for a cure to this problem but none of them seemed to have been SOLVED. One post said he solved it but he wasn't clear on HOW he solved it.
View 1 Replies View RelatedUbuntu Networking :: Cable Modem Networking - Can't Connect To Each Other On The Home Network
Feb 14, 2010I just got connected to Charter Cable Internet service a few days ago and I'm having a weird problem with my home network. Prior to this my network worked fine. On my network I have a desktop running Ubuntu 9.10/64 and Virtualbox with WinXP installed, an HTPC with Ubuntu 9.10/32 installed and a laptop dual booted with Ubuntu 9.10/32 and WinXP. The desktop and HTPC are hard wired to a wireless router and the laptop is wireless. The cable modem is hard wired to the router. I have samba installed and UFW is disabled. The problem is: with the cable modem turned off or on standby, all machines connect to each other and can transfer files, etc just fine but when I activate the cable modem all of the machines can connect to the Internet but the machines running Ubuntu can't connect to each other on the home network. If I boot the laptop into Windows, it can connect to the Linux machines just fine but if I boot it into Linux, it won't connect to the Linux machines but it can connect to the Internet and as far as the desktop, Ubuntu won't connect to the network but Windows running in the Virtualbox with bridged networking can connect to all of the machines.
View 2 Replies View RelatedUbuntu Networking :: No Wifi And Cant Use Network Cable
Apr 22, 2011I thought id give 11.04 a bash and i cant connect to internet via wifi i have a broadcom network adapter built into my hp530 laptop , and my network port is broken so cant use cable connection , so i thought id go back to 10.04 , guess wat i need to d/l the drivers again ... and again i have the same problem ? i have another laptop running win 7 , anyone know how i can get the drivers or what i can do ... ? its a broadcom BCM4311 802.11b/g
View 3 Replies View RelatedGeneral :: Networking - Impossible To Run A Network Cable
Dec 16, 2010I have a Verizon wireless/wired router that I access the internet through. I have a desktop computer running Slackware 13.1 i386, but it is in a place where it would be impossible to run a network cable to. Would you buy a USB wireless card? Would it work with Linux? Is there another way I can get my computer networked that I am not thinking of?
View 12 Replies View RelatedNetworking :: Sharing Network Using Crossover Cable?
Feb 14, 2011At the outset I would like to tell everyone that I am still relatively a newbie in linux. I use a usb mobile broadband data card to connect to the internet, and I recently purchased another desktop for my wife. Both of us do not share any files, but I do not have a router and was wondering if I could share my connection with her using a crossover cable.I did a lot of Googling around and tried various different things, I even followed another thread in the same forum but the most that I have got is my network manager saying that connection has been established. I am however not able to see her computer under my windows network and don't know how to proceed.I don't know where I am going wrong, and considering that my knowledge of networking is at below basement level, I would really appreciate any help in this regard.
View 2 Replies View RelatedNetworking :: Network Cable Just Stopped Working
Dec 14, 2008I have a laptop, and the wireless and cable worked fine for a while, but one day, for some odd reason, the wireless and network cable just stopped working. I'd connect to the web, and I would get output using "ifconfig" and the GUI wireless signal. When I hook up the wire, it detects it. However, no matter what I can't load any web pages. The wire does work in another house, and my windows partition utilizes these devices well. Any ideas?Additionally, I am able to log into my wireless router and change configurations, but that's about it :/.
View 2 Replies View RelatedUbuntu Networking :: Atheros 2413. 9.10 Karmic WICD And Network Manager?
Mar 27, 2010I installed 9.10 Karmic 32 bit on a laptop here that has an Atheros 2413 card in it. I could see the network and tried to connect. After 30 seconds of attempting to connect, it simply says disconnected.
Thinking network manager was to blame, I installed WICD and rebooted. I tried to connect to my network, but it came back with unable to get IP address. Okay, fine. So I check my iBook and Ubuntu work laptop both are connected fine. I tried other drivers within the WICD preferences wext, ndiswrapper, madwifi nothing worked. I power cycled the router thinking something might have been borked with my wireless but it's fine.
Ubuntu Networking :: Getting Bad Password Error From Wicd Network Manager On Encryption
Jan 1, 2011Running ubuntu 10.10 here, brand new install/machine.USB wireless based on a realtek chipset. I spent a few days trying ndiswrapper, and now have the native driver up and running. I can see the network(s) but can't connect. If I encrypt the network, i get a bad password error from wicd network manager (All encypt. methods- Weps, WPA etc) If I open my wireless up with no encryption, i receive a "can't obtain IP" error.
View 1 Replies View RelatedUbuntu Networking :: Gets Internet Connection Via WIFI Using WICD As Network Manager?
Jul 7, 2011I have a Ubuntu 10.04 laptop that gets its Internet connection via WIFI using WICD as network manager, and Windows XP desktop with no Internet connection. What I want to do is share my Internet connection from my laptop with my desktop via a Ethernet cable. But i have no idea what to do. How do i go about doing this?
View 3 Replies View RelatedNetworking :: Can't Use Wicd-gtk Because Wicd Won't Work With Ad-hoc Networks
Apr 4, 2011I am trying to use nm-applet with Arch/Openbox/tint2. I can't use wicd-gtk because wicd won't work with ad-hoc networks. I have tested nm-applet in Ubuntu/Openbox/tint2 and it works fine.
The error message is:
Code:
[esteeven@piccolo ~]$ nm-applet
** Message: applet now removed from the notification area
[Code]...
Ubuntu Networking :: Sharing 10.10 Network With Win7 Over Cat5 Cable?
Mar 6, 2011Im a long time Ubuntu user (since 5.04), but networks were never my speciality, I have a desktop running 10.10, connected to the internet trough a US robotics modem (connection eth1), and i want to share its network with my laptop running win7, over a cat5 cable (connection eth0), but the problem is I dont seem to understand what i am doing wrong, what the missing steps required, or in which end is the problem (either ubuntu or windows side).
From what I could grasp was needed googling about the subject, i already set the eth0 connection to share with other computers (in network manager edit connections auto eth0 ipv4 configuration set to share with other computers). Also using the cli set eth0 for static ip using :
Code:
sudo ifconfig eth0 192.168.0.1 Now the question is what i am missing? or is everything needed already done and i just have to properly configure the win7 side (which i already checked several times)?
Here is my ifconfig output:
Code:
eth0 Link encap:Ethernet Endereo de HW 00:01:29:a6:55:fe
inet end.: 10.42.43.1 Bcast:10.42.43.255 Masc:255.255.255.0
endereo inet6: fe80::201:29ff:fea6:55fe/64 Escopo:Link
UP BROADCAST RUNNING MULTICAST MTU:1500 Mtrica:1
[Code]...
Ubuntu Networking :: Internet Lost Suddenly By Removing Network Manager And Installing Wicd
Mar 16, 2010I thought to uninstall Gnome Network manager since it was always asking for to connect with wireless internet but it was working fine with wired internet.I uninstalled it and installed wicd. and then for some unknown reasons the internet disappeared.Kindly let me know How can i get back network manager without having internet and make internet work on my computer.I did searched a lot on Ubuntu forums using somone's else computer but no success.So if you let me know how to approach the problem in right manner it shal be great .
View 6 Replies View RelatedNetworking :: Ethernet Cable And Wireless Network Won't Work In Ubuntu 9.10 / Sort It?
Feb 20, 2010I'm a new user of Ubuntu, so i'm not that familiar with this OS. My wireless network is detected but when I'm entering my 128 bits WEP key, it doesn't connect at all. I have no clue where to start troubleshooting.
Here's some of my specs if that's of any help:
Computer is a Sony Vaio laptop model VGN-SZ370P
My wireless card is from Intel Corporation 82801G (ICH7 Family) USB UHCI Controller
The ethernet cable connection used to work before, but I fooled around with some commands and now seems to be disabled...
Ubuntu Networking :: Slow Wifi - But Fast Connection On Network Cable
Jan 22, 2011I have a strange problem that I cannot diagnose -- slow wifi. About two or three weeks ago, I noticed that my wifi began to slow down dramatically. The problem is the same on my ubuntu laptop and my ipad. But when I connect directly to the router with a network cable, my connection is fine. So it is definitely a problem with the wifi signal itself.
What I have done so far:
(1) I checked all of the MAC addresses connected to my wifi. I identified my tivo box, laptop, and ipad. Nothing else.
(2) I used [I]wifi analyzer[I] on my android phone and selected an unused wifi channel (channel 8).
(3) I changed the username/password on my wifi signal. I also changed the password for my router's admin privileges.
(4) I restarted my router and computer.
None of this helped.
I am using a Netgear WGR614 wireless router.
Ubuntu Networking :: Freeze On Network Cable Plugging-in HP Mini 5101?
May 2, 2011Since I upgraded to Ubuntu 11.04 my system freezes when I plugging-in an ethernet cable.My network devices:
Code:
#sudo lshw -C network
*-network
[code]....
Networking :: When On The Network, Can See The Shares Just Fine, But If Use A Crossover Cable, Cannot See Or Access The Folders?
Mar 3, 2011I have a home network and I use Samba to share files. Now when I am on the network, I can see the shares just fine, but if I use a crossover cable, I cannot see or access the folders or files.My goal is to use a crossover cable from one computer with clonezilla to my server in order to use Samba to make an image of my workstation and save the image on my server.But everytime I try to connect with clonezilla I get a persmissions error and the share will not mount. I tried going to the shell and mounting as root, but that did not work either.
I have another server which is only a console and it works though I am unsure why. The share though is a mounted usb drive while on the one that does not work, it is on the internal hard drive.I was wondering if anyone had any ideas or anything I could try to narrow down the problem. Oh, I can access the share using ssh, but not samba. One other thing, the shares are set to allow read/write access to everyone so I don't see why I can not access it.
Ubuntu Networking :: Network Manager Replaces Default Route When Eth Cable Plugged
May 5, 2010I have been encountering this problem, not only on 10.4, but on older versions too: I use a wifi router to connect my laptop to the Internet, but sometimes I need to connect directly to another computer to move some files over GLAN. But Ubuntu's Network manager doesn't allow me to configure the eth0 interface without specifying a gateway (no gateway = grey submit button), but when a gateway is specified, it always rewrites the default gw specified already by the active wifi connection and returns back after unplugging the eth cable.
Of course this can be solved by a few route commands, but this is unacceptable since it is needed to establish the cable connection without any further assistance from within and as well without replacing the default gw and thus breaking the Internet connection. Is there, please, any possibility how to prevent Network Manager from replacing these routes?
Networking :: Network Doesn't Work If Cable Is Plugged In At Boot (Debian Lenny)?
Jan 19, 2010For about the past month I have been having a very frustrating problem When I boot the system with the ethernet cable attached it acts as if the cable is unplugged even though the connection light is litWhen I boot the system with the ethernet cable disconnected and wait until it boots all the way to gnome and then plug in the cable everything works fine
View 1 Replies View RelatedNetworking :: Can Cat5e Cable Tester Be Used For Cat 6 Cable
Apr 7, 2010Can Cat5e RJ45 connector crimper be used for Cat 6 connector because I heard cat 6 connector is different from cat 5e connector and also same question for cable tester can cat5e cable tester be used for cat 6 cable?
View 1 Replies View RelatedDebian :: WICD Network Manager Does Not Detect Any Network / Resolve This?
Jan 16, 2011I have installed WICD on Debian . I can now access a new a Network Manager screen, which did not exist before, but it does not display/detect any wireless networks. It is like dead. Before installing WICD I did at least have a wireless WPE encrypted network, which was detected, although it often disconnected for no known reasons. Now even that Network has gone and I can't go on line. Can anybody help here? How can I configure the WICDNetwork Manager to detect an existing network or create a new one? In the latter case, would I have to reconfigure the Router settings to setup/connect to a network in Debian? May be I have to do this, because Tor/Vidalia changes my IP address and so my Network Adapter ( Linksys) can no longer connect to the router.
Also, when trying to follow troubleshooting leads in this connection, the Terminal screen on Debian ( CMD) would often return a PERMISSIONS DENIED message.
Ubuntu Networking :: Network Manager - Wireless Connection - Dell Laptop Error Wicd States "Wrong Password" Which Is Not True
Jun 11, 2010These problems just started the last couple of days but I have been using Lucid 10.04 for a month now. My wireless Signal varies in strength wildly. I sitting at home, not 20 feet from my router. I never had these problems before Ubuntu Lucid Lynx 10.04. I am running both Network Manager and Wicd.
Errors:
1. Wicd states "Wrong Password" which is not true.
2. Dropping off-line for no reason, sometimes 3 or 4 times a minute and sometimes it works fine for hours.
3. Firefox 3.6.3 Automatically Checking "Work Offline"!?
[Code]...
I have the Proper Wireless Drivers. I have not changed my wireless settings, channel or WPA for 8 months now so I know thats not it.
OpenSUSE Network :: Can't Authenticate VNC After Samba Config
Apr 1, 2011First, like a dummy I did not backup the Samba config file before making changes. Using openSUSE as ftp and http server, was following tutorial to share between openSUSE and windows. I was using VNC to access machine to edit Samba config file, after altering the the file VNC authenication fails. I can still authenicate locally and through the ftp.
View 1 Replies View RelatedSecurity :: How Can Authenticate Ethernet Users Before They Use Network?
Nov 22, 2010is there any solution for authentication of ethernet users.something similar to daloradius for wifi.I dont want to use pppoe. is there any way to connect daloradius with dhcp server, so when certain mac address asks for IP first daloradius will look if it is allowed.
View 11 Replies View Related
