I'm using Ubuntu 9.10 on a i386 laptop and have noticed a signal drop while checking my Administration Log File viewer. I noticed on the file starting :-cfg 80211:Regulatory domain World, then another set of frequencies and below that calling CRDA for country : Am
cfg 80211 : Regulatory domain changed to country : Am
My question is-- how do i set it back to Regulatory domain : EU ?code...
I've got a Samsung NC-10 running Maverick. I purchased it in the US, and am now in France. I'm running into troubles connecting to certain networks, because they are broadcasting on channels 12 or 13.After a bunch of research, it seems that it's not a driver issue, and may/may not be a hardware issue (something about the EEPROM), but that it could have something to do with the regulatory domain that CDRA is sending to the kernel. While I sort of understand what the second half of that sentence means, I don't possess the technical accumen to do anything about it.
Has anyone (most likely ex-pats) run into this problem and found a way to get around it?I know that this has to be the problem, because my Android phone was unable to connect to the same networks until I changed the regulatory domain settings to scan channels 12 and 13, and then it connected immediately.
My laptop was working fine on wireless till the userinterface changed and it defaulted to ethernet and now it won't let me go back on wireless How do i disable ethernet?
View 4 Replies View RelatedI have Centos 5.3 on my home computer. When I was logging-in to the terminal it was like ( myname@34myhome.local$ ) now when I log-in to the terminal I get (myname@dhpdpc64$ ) I have not changed anything. It seems like my domain name has changed. Why the domain name changes automatically?
View 5 Replies View RelatedI am relatively familiar with Ubuntu, but some time last week it updated and now ALT + Tab temporarily minimizes windows to switch between open apps and shows a little window with icons representing the open apps. I much preferred the old way of just switching between them without minimizing and the more graphically appealing (I guess to some) window. I have checked Keyboard Shortcuts and it seems that I no longer have that my original option available, is there another way to select that option, or add it back to the keyboard shortcuts or am I just stuck with it unless I decide to back up to a previous release? Hope this made sense, and I won't be able to try any suggestions until tomorrow so please feel free to throw as many suggestions as you want to me and I will try them all one by one tomorrow morning.
View 5 Replies View RelatedThat's a picture of my ubuntu 9.1 64bit login screen. The background image I changed myself months after this problem started, so I'm sure that has nothing to do with it. What I DID do that caused this problem was follow the openoffice dark theme fix on this page:[URL]
BACKGROUND: I installed a dark theme that made the openoffice word page black, so I had to find a fix for it on the page above. I'm not using the theme anymore, but it was "Slickness black" on gnomelooks.
In case someone didn't see a problem with the orginal login screen, the section where you click the username and enter your password should look like this:
Also incase anyone was going to ask, my login DID look like the second picture at one point (before the openoffice fix) I just removed openoffice completely and reinstalled it so that isn't the solution.
I installed KDE on my Ubuntu laptop and then got rid of it. I used puregnome which worked but I still have weird fonts in Firefox. I tried adjusting the preferences in Firefox but nothing works. How can I revert it back?I did a fresh install (but kept my home directory) and it made no change. I also removed the .mozilla folder entirely and uninstalled/reinstalled Firefox. No change.How can I get this back?
View 8 Replies View RelatedI recently installed Ubuntu 10.04, and after I rebooted to finish installing my Nvidia drivers, the bootsplash reset itself to a resolution of 800x600. Is there any way to change it back to 1680x1050?
View 4 Replies View RelatedI'm running Kubuntu, but after trying an Ubuntu tool to help configure Grub, my boot up plash screen (xsplash? My card isn't KMS compliant, so I'm not using Plymouth) now shows the Ubuntu splash.
Anyone know how to switch which boot splash is used back?
Had to restart following an extract crash, and upon restarting, much of my theme, including all my icons had changed. Prior to this I was using the Awoken Icon Set. I've gone through and rerun the Awoken Customization script, but no luck. Simply trying to change my theme, and icons in the theme manager doesn't work either.
View 1 Replies View RelatedIt seems I had some kind of intrusion and I found 6 files changed its ownership to user 1035 and group 1035, I don't know how but I need to change them back to its original owner (root) because one of them is the ls command and the other is the ifconfig how can I revert them to its original state? I cant do it with chown.
View 3 Replies View RelatedI use Ubuntu 10.04. I'm not sure what other info is relevant, Gnome, I suppose.
Yesterday I installed wine-1.2 (using Synaptic), in order to be able to build programs for Windows. This in itself seemingly succeeded, but as a result of the installation, fonts in Firefox changed (one can say immediately - when the installation was done, the fonts had changed).
For example, in this forum, the non-monospaced font changed in some way I can't put my finger on. Right now, posts feel less readable, but getting used to it may just be a question of time.
Some other pages (in existing tabs, and when looking them up again) changed the font size, some increased the size, some decreased it. This can be fixed by using Ctrl-+ or Ctrl-- quite easily, but <whine> I would like these kind of changes not to happen at all </whine>.
I uninstalled wine (not removed completely - I don't know what the difference is), but this didn't undo the font change.
The font settings within Firefox (Preferences) don't seem to have been changed.
The point of this post is to ask what may have happened, where such dependencies between fonts are stored, and how to undo the change, in case I'd like to.
I did a bunch of updates, in sid, no issues. But when I rebooted the next day the log in had chanded. No problems logging in, the appearance had changed, and you now have to use the mouse to click on your name to open the password box, where before you could hit enter and get the same results. It is not much, but I have been trying to to restore it back with out much luck. I've played with gdm and gdm3 and a couple of other things but no luck. I did see a update for log in but have not been able to figure out the next step.
View 1 Replies View RelatedSomething has changed all my file permissions to read only and when I try and change them back it wont let me. Is there something I can do i Nautilus to correct it?
It even effects the waste basket-all the stuff in there is now read only and when I delete items I get a file operations window, which comes and then goes like its deleted them, but they re still in the waste basket, doesnt show an error message like it does if I try and move any other file.
I just installed xubuntu-desktop on my Ubuntu 9.10 desktop, just to have the option of using xfce ( I did the same with Kubuntu - kde). I have noticed that the Xubuntu splash screen now comes up rather the the Ubuntu default splash screen.
I tried to use Start-Up Manager to changed back to Ubuntu but Xubuntu xsplash screen ( one with the fire flies ) still comes up. Is their any way to change this back to the Ubuntu Splash Screen without the Xubuntu screne coming up at all ??
when i was sleeping my computer restarted itself and when i signed back in all the windows were huge. the resolution is set at 900x600 and no other option makes the windows smaller.
View 1 Replies View RelatedAround with my Login default screen and set my login to "Ubuntu (Safe Mode)". Now, it seems as if the system does not grant me the authority to change it back to another default login.
View 5 Replies View RelatedWhen I first installed openSUSE 11.4 the /boot directory looked like this:
I had installed VirtualBox through Yast and decoded to delete. After deleting the /boot directory looked like this, pointing now to the desktop kernel.
I went into YAST and deleted all kernel entries that contained desktop, trying to get back to the original configuration.
After doing this, the /boot directory now looks like this.
Is there any way to get back to the original kernel configuration without having to do a complete installation?
Somehow gedit went ahead and modified its hotkeys to have save be nothing, and control s be find. How to get save back?
View 4 Replies View Relatedi am having mail server. im using sendmail.but it is not able to send to certain domain names....mails are getting back with the following errors
this is from logs
[code]...
I've got a home server running Ubuntu Server 9.04 and several machines running Ubuntu Desktop (9.04 and 8.04) and Windows (XP, Vista and 7). Now what I want to do is to create a domain and directory server similar in function to Windows Server w/ AD and join my other machines to the domain, but am not sure where to start. I already have file shares with Samba but now I want to setup a domain.
View 3 Replies View Relatedone is whats the best way to connect to my home pc from another pc out there in the world? be on a windows or linux machine and remote into my home pc. Im using ubuntu 10.10. the other question is, i got a big family who aren't computer savvy at all. Is there a way to remotely assist them if they are on windows or mac. im looking for something similar to the windows remote assistance. With both users being able to see and control the desktop. with the hosts permission. something simple enough so it wont be a whole process to walk them threw to even get connected to in the first place.
View 2 Replies View RelatedSo having recently set up my server (including some disk space and ushare, and an additional laserjet printer) I was wondering if anyone had any experience of putting a multifunction printer into an ubuntu server and adding it locally (to the server) then to the networked computers....I know this printer works perfectly (the scan too!) when plugged directly into a machine's USB....I suppose my real question is....does anyone know anything about the scanner side of it?? is this going to work?? I reckon the printer side will (/should - i know the printer works and i know the server can share printers.....lol) but the scanner side is relatively new (when put into the context of shared from my HS.Please note:My server is just running vanilla (plain) ubuntu 9.10....and my compo's are 10.04 and 9.10....ubuntu ONLY network...
View 1 Replies View RelatedAt the school i work in i have a server2k3 server that provides a domain to all the windows clients, aswell as a fedora server that acts as an imaging machine and webserver.
Im rather concious of the fact that if for any reason the Server2k3 server was to die there is no backup of active directory, or anything that can take its place whilst a replacement is found.
So is it possible to use a fedora machine with samba as a secondary domain controller? so it can be used as a login server, and has a copy of AD.
Got a few servers runnning and they all connect fine to the net. Each are running with a static IP provided by my ISP. But I have one server were I re-installed Debian Lenny - or tried to. At the stage were it wants to connect to a mirror it cannot due to network problems. I tried a new install leaving it behind a router. This solved the problem and it connected. Tried once more directly connected to a static IP and same problem happened - it got to the point with the mirror. Tried changing the settings after the installation through the router. This is what I get from ifconfig :
[Code]...
If I ping it from one of my other servers it shows as OK and can also ping my other servers from the server in question, but if I ping google.com it times out (fails). The IP 92.62.196.77 is in the range that I can use. Checked that with my ISP. Just to make sure I tried disconnecting one of the servers that I have working and changed the server in question settings and still it came out with the same problem.
I have a Belkin N router setup with a virtual server to port 80 to 192.168.2.2 which my server sits on.
However, for some reason, I can get to the server from other PC's on the Router, but from outside, it will not port to the Server?
Any ideas on how to setup this?
I have Windows Webserver 2008 installed running on a 3.0GHZ Server.
I m using the pc as gateway....i have two NICs:1) 10.6.15.254 ---> for internal network 10.6.15.02) 10.6.0.115 -----> for out side world I can ping and ssh any out side machine but when i try to ping or ssh any machine in the 10.6.15.0 network it says host unreachable.... i can ping and ssh gateway i.e. 10.6.15.254 and 10.6.0.115 but not the client machine in the 10.6.15.0 network from out side world even i flush iptable rules i can not access any client machine i m using ubuntu 10.04 as operating system..
View 2 Replies View Relatedcoz my server blouked ip so i need to open to get all ips in world
View 4 Replies View RelatedI bought a WD My Book World Network Hard drive and are trying to connect it. I am using Suse 11.2 and have it connect wired through a Netgear WGR614 router.I believe I can use Samba?It is working under Windows and it connected as network drive.
View 2 Replies View RelatedCan I mount a WD My Book World Edition NAS in Ubuntu 11 without extensive terminal work? The NAS has a static ip, it can be ping'd from Ubuntu, and my Windows machines access it just fine, no passwords required.I have not been able to find a way to make this work. Nothing against the terminal per se, it's just still a little too unfamiliar and I keep hitting error road blocks on this one.
View 4 Replies View Related