when i was sleeping my computer restarted itself and when i signed back in all the windows were huge. the resolution is set at 900x600 and no other option makes the windows smaller.
View 1 Replies
Around with my Login default screen and set my login to "Ubuntu (Safe Mode)". Now, it seems as if the system does not grant me the authority to change it back to another default login.
View 5 Replies View RelatedI have a configuration of:
Intel Pentium Dual Core 2.40 Ghz cpu
Intel DG31PR desktop board
2 GB adata DDR2 (800 BUS) ram
NVIDIA Ge-Force 8400 GS NX84GS series PCI express
It's the first time I was installing a linux. First I collected an extra hdd for the installation. I used the entire drive for ubuntu 9.10 installation. It installed without any problem except the special features were turned off. It was said that the special features and animations would start only if their is a sufficient graphics processor. I picked up a solution and from the hardware drivers option, installed the nvidia graphics card. Problem started when i restarted my pc. The resolution automatically changed into 800 X 600 px. I changed it to 1280X1024 (which is highest for my monitor). But when I restarted again, it again became 800X600 px. And it becomes like this everytime I restart.
my motherboard has ati radeon 3300 hd and when i install it, after restart, my resolution is automatically changed to something big, and my monitor only supports 1024x768 and if something bigger is selected, the monitor goes NO SIGNAL
what am i supposed to do? i have some driver installed by default, i can utilize compiz just fine, play videos on ..... at 1080p just fine, play World of Warcraft almost smooth, i believe that if that driver is installed, it will be even better, but im afraid that if i install it, my resolution will automatically change to something large and my monitor will go NO SIGNAL
I recently installed Ubuntu 10.04, and after I rebooted to finish installing my Nvidia drivers, the bootsplash reset itself to a resolution of 800x600. Is there any way to change it back to 1680x1050?
View 4 Replies View RelatedHad to restart following an extract crash, and upon restarting, much of my theme, including all my icons had changed. Prior to this I was using the Awoken Icon Set. I've gone through and rerun the Awoken Customization script, but no luck. Simply trying to change my theme, and icons in the theme manager doesn't work either.
View 1 Replies View RelatedI've been using Ubuntu for about two years now, then suddenly today (after my PC accidently lost power) the screen resolution changed to 800x600 (it is, in fact, a widescreen monitor, and this resolution looked 'zoomed in'). The only two resolutions detected with xrandr were in the 4:3 ratio (800x600 and something worse). I followed some instructions, trying to reset the resolution to 1024x576.
I got as far as
$ xrandr --newmode "1024x576" ...
then,
$xrandr --addmode default 1024x576
but when I
$xrandr --output default --mode 1024x576
I a message to the effect of 'your screen can only support 800x600 or less'. Ah-ha, I thought, you stupid machine; this screen has had a greater resolution for over a year.
And so, from System->Preferences->Monitor, I forced the computer to switch to this new resolution. When prompted, I reset.
My current problem is that when I turn the computer on, the monitor displays a floating 'Input Not Supported' sign. I Ctrl+Alt+F1'd, and now all 'xrandr' and 'cvt' commands return:
Can't Open Display
My first priority is to get the computer back to it's less-broken 800x600 state;
EDIT: I'm running Ubuntu 10.04
A few minutes ago, I was connected to my remote machine running Ubuntu 10.10. I changed the resolution of the screen while connected with VNC, but now I can't connect to the remote machine. How can I fix this without leaving my house?
View 2 Replies View Relatedso here's the deal. A few minutes ago, I was connected to my remote machine running Ubuntu 10.10. I changed the resolution of the screen while connected with VNC, but now I can't connect to the remote machine.
View 10 Replies View RelatedThat's a picture of my ubuntu 9.1 64bit login screen. The background image I changed myself months after this problem started, so I'm sure that has nothing to do with it. What I DID do that caused this problem was follow the openoffice dark theme fix on this page:[URL]
BACKGROUND: I installed a dark theme that made the openoffice word page black, so I had to find a fix for it on the page above. I'm not using the theme anymore, but it was "Slickness black" on gnomelooks.
In case someone didn't see a problem with the orginal login screen, the section where you click the username and enter your password should look like this:
Also incase anyone was going to ask, my login DID look like the second picture at one point (before the openoffice fix) I just removed openoffice completely and reinstalled it so that isn't the solution.
Ok, so here's the deal. A few minutes ago, I was connected to my remote machine running Ubuntu 10.10. I changed the resolution of the screen while connected with VNC, but now I can't connect to the remote machine.
How can I fix this without leaving my house?
I changed may graphic card, earlier I used NVIDIA FX5500 with nvidia driver, now I was trying to use ATI Radeon 7500, but there are problems with graphic configuration. At first attempt server started but after I changed a screen resolution the monitor went blank. I restarted a computer but after the X server started immediately the monitor wnet blank. I found that for completely for me unknown reasons Xorg was trying to use an NVIDIA glx module with radeon driver. I removed this nvidia driver, I expected ubuntu would be able automatically to set up a proper configuration, but instead of ubuntu complained about a missing driver. I also tried manually to set up some basic config using Xorg -configure but after that the Xorg server was stuck.
View 10 Replies View RelatedSomething has changed all my file permissions to read only and when I try and change them back it wont let me. Is there something I can do i Nautilus to correct it?
It even effects the waste basket-all the stuff in there is now read only and when I delete items I get a file operations window, which comes and then goes like its deleted them, but they re still in the waste basket, doesnt show an error message like it does if I try and move any other file.
(Video card is a nothing special Nvidia)
I want to change the default resolution of 1280x1024 to 1024x768. Setting at boot using the space bar or the KDE display (personal settings) does not survive the next boot. In yast or yast2, hardware, there is no monitor selection (something wrong here?).
Using root, run level 3, the command sax2 --vesa 1024x768 does nothing.
or sax2 -m 0=fbdev does nothing.
I had no problem with previous suse releases. What am I missing?
I tried adjusting the resolution in Ubuntu so that it would fit better on my screen. The first one I tried worked ok, but when I tried a higher resolution the screen went black. Now I can't see anything on the screen so I can't change the resolution back to where it was. If I hit esc when booting up, is there anything I can do that will change it back to the default?
View 1 Replies View RelatedI just stupidly changed my graphics resolution in System - Preferences - Startup Manager, now i dont get a login window or anything just a black screen. I also disabled the splash but i assume this just gets rid of the ubuntu loading line thingy?
the weird thing is that the resolution was set to 640x800 or something like that in the Startup Manager as default and the laptop im using (an old Toshiba Amilo P4) supports 1024x768. the System - Preferences - Display menu wouldnt let me change any display settings which is why i was messing about here. I havent got any backed up x org file and only a live usb of super os/ubuntu - no cd or floppy drive.
I just installed xubuntu-desktop on my Ubuntu 9.10 desktop, just to have the option of using xfce ( I did the same with Kubuntu - kde). I have noticed that the Xubuntu splash screen now comes up rather the the Ubuntu default splash screen.
I tried to use Start-Up Manager to changed back to Ubuntu but Xubuntu xsplash screen ( one with the fire flies ) still comes up. Is their any way to change this back to the Ubuntu Splash Screen without the Xubuntu screne coming up at all ??
I downloaded some software yesterday from the ubuntu rep. This morning my screen has the bottom part of in black there are the KDE docky ,firefox ,terminal & rhythmbox icons ,so is the taskbar..but the wallpaper is cut up ,4cm off. I have noticed that the splash screens res has changed too. It's sharper (smaller). The browser as a consequence is also half lit & having noscript in the bottom without it being visible is a problem. Why has this happened & how can I fix it. The last working config, well that's somewhere else.
View 3 Replies View RelatedI am unable to return my screen resolution back to the 1024x setting. Somehow I got it stuck on the 340? setting, which is not allowing me to see/access the dialog box save button when I go to preferences, display. Anyone know a way out of this mess?
View 1 Replies View RelatedEvery time I restart my computer the screen resolution changes back. I've recently started to use XFCE, it didn't do it in GNOME. what can I do to make it stay the same?
View 1 Replies View RelatedI'm running Fedora 14 and set the screensaver (in System>Preferences on the Gnome GUI) to activate after the computer is idle for 30 minutes. After the screensaver is activated, and a press a key or the mouse, the screen is back to normal -- no problem.After the screensaver has been activated once, however, it comes back on very quickly -- usually in 2 or 3 minutes if the computer is idle. The only way I have found to correct this (and set activation back at 30 minutes again) is to log out and back in again.How can I correct this, and automatically set screensaver activation back at 30 minutes each time the normal screen is reactivated?
View 1 Replies View RelatedHow can I change screen resolution?
View 4 Replies View RelatedI'm very new to Ubuntu and have 9.04 running on a Sony Vaio, don't know what graphics card I have. My screen resolution doesn't have an option higher than 800x600, so everything looks super zoomed in. Other threads tell me to edit xorg.conf, which I did (probably incorrectly). The result was the computer had mega problems when I restarted it, and when it finally got back to the desktop it didn't give me any other options for screen resolution. Also it says I'm in low graphics mode.
View 1 Replies View RelatedI recently upgraded my desktop pc from 10.04 to 10.10 and ran into a tad of trouble. After I attempted to login from the GDM, something caused the system to crash and return to the GDM. So, I got my laptop out, did some googling, and decided to delete ~/.config/monitors.xml to try and reset the resolution. That got me to the Desktop, at which point I was greeted by more display issues.
The point at which the computer normally goes idle seems to crash and return it to the GDM as well. Needless to say, I disabled the idling/password prompt setting to prevent crashes every five minutes. Anyway, the prevailing problem is that I can't change the resolution itself -- as that seems to cause the same issue.
I've recently installed Ubuntu 10.10 on an old Dell computer I have. Everything seems to work fine, but I can't seem to change the screen resolution. In the monitor Preferences it says Monitor:Unknown. It's stuck on 1600x1200 and I'd like it to be closer to 1024x768
I've tried changing the xorg.conf file to no avail. I've been browsing for 3 days now looking for a solution.
[URL] These are my specs if it helps any, ignore the windows installation info because I have it installed alongside ubuntu.
I cannot get my screen resolution to change from 1600x1200. This is a new install of Ubuntu 10.10 and the desired option ( 1024x768 ) is listed under System/Preferences/Monitors. Changing the resolution and clicking Apply results in a screen refresh, but the resolution remains at 1600x1200.
I have gone through just about every tutorial and thread I can find, but nothing works. Here is some relevant information I have gathered code...
I was evaluating a live distro on a USB drive and the resolution got changed from my normal 1680X1050 to 1024X768. I normally run SuperOS (ubuntu derivative) at 1680X1050 on my 22" LCD flatscreen monitor. The users manual for the monitor says that the optimum resolution is 1680X1050. Now when I go to system, preferences, monitors the monitor is unknown and the highest resolution that is available is 1360X768. I have clicked on Detect Monitors but not sure anything is happening. I have went to system, administration, additional drivers but none show up. The OSD menu for the monitor is showing 1380X768. I haven't been able to make any changes to the setting. I push the button that is supposed to get me into the sub-menu but nothing happens.
View 3 Replies View RelatedI've recently upgraded to Ubuntu 10.04 LTS. When I boot up I see this:
[URL]
in a very low resolution
At the login screen and on the desktop my resolution is 1680 x 1080
Is there a way to make the splash screen that resolution as well?
I like many of its features. But i cant change the screen resolution from 800 x 600 and the monitor type is set to unknown... I tried googling to find a solution but i didnt succed.. Atlast i gave up and tried fedora.. fortunately fedora detected my monitor and i was able to change the resolution.. It is also another linux distribution but why not ubuntu...?
View 1 Replies View RelatedJust Installed the latest version of Ubuntu Netbook on my Toshiba Portege 7200 and the screen resolution is set to 800x600. The OS is not recognizing the fact the laptop can do 1024x768. I've been searching the net for a few hours to fix the problem and I'm not getting anywhere. The fix to the problem is to add the info below to the Xorg.conf file. This file does not seem to exsist on the latest version and if I create it manually it does not work.
# xorg.conf (X.Org X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only* if it has not been modified since the last upgrade of the xserver-xorg package.
# Note that some configuration settings that could be done previously in this file, now are automatically configured by the server and settings. Here are ignored. If you have edited this file but would like it to be automatically updated again, run the following command:
# sudo dpkg-reconfigure -phigh xserver-xorg
Section "Device"
Identifier "Trident Microsystems Cyber 9540 (rev 52)"
Driver "trident"
BusID "PCI:1:0:0"
EndSection
Section "Monitor"
Identifier "Integtrated LCD"
HorizSync 28-90
VertRefresh 43-85
#Modeline "1024x768_60.00" 63.50 1024 1072 1176 1328 768 771 775 798 -hsync +vsync
#Option "PreferredMode" "1024x768_60.00"
EndSection
Section "Monitor"
Identifier "VGA-0"
Option "Ignore" "true"
EndSection
Section "Screen"
Identifier "Screen 1"
Monitor "Integtrated LCD"
Device "Trident Microsystems Cyber 9540 (rev 52)"
EndSection
