I have Centos 5.3 on my home computer. When I was logging-in to the terminal it was like ( myname@34myhome.local$ ) now when I log-in to the terminal I get (myname@dhpdpc64$ ) I have not changed anything. It seems like my domain name has changed. Why the domain name changes automatically?
View 5 RepliesI'm using Ubuntu 9.10 on a i386 laptop and have noticed a signal drop while checking my Administration Log File viewer. I noticed on the file starting :-cfg 80211:Regulatory domain World, then another set of frequencies and below that calling CRDA for country : Am
cfg 80211 : Regulatory domain changed to country : Am
My question is-- how do i set it back to Regulatory domain : EU ?code...
I have a configuration of:
Intel Pentium Dual Core 2.40 Ghz cpu
Intel DG31PR desktop board
2 GB adata DDR2 (800 BUS) ram
NVIDIA Ge-Force 8400 GS NX84GS series PCI express
It's the first time I was installing a linux. First I collected an extra hdd for the installation. I used the entire drive for ubuntu 9.10 installation. It installed without any problem except the special features were turned off. It was said that the special features and animations would start only if their is a sufficient graphics processor. I picked up a solution and from the hardware drivers option, installed the nvidia graphics card. Problem started when i restarted my pc. The resolution automatically changed into 800 X 600 px. I changed it to 1280X1024 (which is highest for my monitor). But when I restarted again, it again became 800X600 px. And it becomes like this everytime I restart.
I can't open my terminal anymore. I changed a preference under the Title and Command tab in the preferences of the GNOME terminal. I put a custom command instead of the normal shell, but after I closed I realized that under the "When Command Exits" menu, I chose "Close Terminal". This means that the terminal closes automatically as soon as the command is done. After I open, it finishes the command and closes. I was wondering whether there is some way to change the terminal preferences from somewhere else or reinstall the terminal, and I obviously can't use terminal commands.
View 6 Replies View Relatedmy motherboard has ati radeon 3300 hd and when i install it, after restart, my resolution is automatically changed to something big, and my monitor only supports 1024x768 and if something bigger is selected, the monitor goes NO SIGNAL
what am i supposed to do? i have some driver installed by default, i can utilize compiz just fine, play videos on ..... at 1080p just fine, play World of Warcraft almost smooth, i believe that if that driver is installed, it will be even better, but im afraid that if i install it, my resolution will automatically change to something large and my monitor will go NO SIGNAL
One of our client was complaining that their server was down and mysql and apache services were down. The server is Ubuntu 8.04. When we checked, the permissions of /etc/init.d/mysql and /etc/init.d/apache2 were changed to 644 from 755. How could this be possible?I need your valuable suggestions on how can i monitor whether any malicious intrusions or scripts are running.
View 2 Replies View Relatedwhen i was sleeping my computer restarted itself and when i signed back in all the windows were huge. the resolution is set at 900x600 and no other option makes the windows smaller.
View 1 Replies View Relatednow my system does not connects automatically when fedora start's to eth0 i have to connect it manually by pull down menu in the beginning hostnname was dbe272b22.dslam-172-17-161-245-0532-474.dsl.cantv.net i do not remember if the last part ".cantv.net" was there.... i changed hostname "dbe272b22.dslam-172-17-161-245-0532-474.dsl" maybe ending with ".cantv.net" with system-config-network for hostname "edicta" i modified /etc/hosts by hand twice, now do not remember what i did exacly but here you can see /etc/hosts
[Code]....
is it possible to join a Fedora box to a Windows Domain. Will the box be automatically added in DNS?How do I configure Fedora afterwards so I can login with a domain user on the box?
View 1 Replies View Relatedi want to change eth0 ip address from 192.168.7.143 to 192.168.7.140, but it not changed even i follow the steps in this tutorial this is content of file /etc/sysconfig/network-scripts/ifcfg-eth0.
View 3 Replies View RelatedI've just tried to install freepascal [URL] on CentOS 5 using 'yum install fpc', and it installed package fpc-2.2.2-3.el5.1.i386. Since official stable version of freepascal is 2.2.4 (and version 2.4 will soon be released as new stable version), is it possible to update "official" freepascal in CentOS 5 repository to 2.2.4 (and later possibly to 2.4) ? I've read somewhere (wiki or website or some other place), that CentOS wont have php 5.2.5 because official CentOS repositories are never changed. Does this also apply to other software (like freepascal)?
View 1 Replies View RelatedWith virtualbox I do a test session to train myself with centos before I make big mistakes on my production server.I did take a harddiskfile vdi to another computer with virtual box. Now I have the problem that de MAC-address is changed.I can not get the mac adres anymore, becaus those computer is sold. How can i change the trust of the MAC-address in centos? Or must i change de MAC-address? If I may change the MAC-address, i must do that inside centos, end not inside virtualbox, if you understand me?
View 5 Replies View RelatedI have installed CentOs 5.5 with windows XP (dual boot) and then did an update. After rebooting Now grub is showing 3 items. Here is my grub config file before update:
#boot=/dev/sda
default=0 timeout=10
splashimage=(hd0,6)/grub/splash.xpm.gz
hiddenmenu
[Code]...
I'm using rsync to create a mirror of the data files on our main server every day. I've looked at the man page, and can't see it; can I get a listing of the files that have been changed on or added to the mirror when it's completed? Can it just log what it's doing to a file?
View 1 Replies View Relatedhow rsync will handle disk images. Will rsync copy only the changed blocks of a vhd or a lun? This is what I've been told, but wouldn't this require overlaying a filesystem on the vhd? How would rsync handle copying a 500GB lun?
View 1 Replies View RelatedCan not edit domain.xml? I use virsh edit domain, change is finished, save and exit, use wq!. But the value of the recovery back I am use centos 5.5, libvirt 0.8.2, qemu 0.9.1. KVMI just want to change the guest system inside the Qemu Virtual CPU to the physical cpu information
View 4 Replies View RelatedI have centOS 5 server & have configure web server. I want to this webserver share on my network. How to configure domain.
View 8 Replies View RelatedHow to configure centos 5.4 as a domain controller?
View 2 Replies View RelatedI have a centos 5 server joined to a win2003 active directory domain. It's a virtual machine, so i had to sync the date (ntpdate) because it was 12 minutes different. It worked, but not ntlm authentication is not working anymore. If i rejoin the domain i get:
net ads join -U administrator@MYDOMAIN.COM
administrator@MYDOMAIN.COM's password:
Failed to set password for machine account (NT_STATUS_DISK_FULL)
Failed to join domain: NT_STATUS_DISK_FULL
So I recently purchased a VPS and had CentOS strongly recommended by a friend for my servers OS. I have a server, and one IP.
My /etc/resolv.conf reads...
nameserver 203.98.68.110
nameserver 203.98.68.210
I trying to Migrate NT4 Domain to Samba-3 following the example in: [URL] where they mention "This migration process makes use of Linux system tools (like useradd) to add the accounts that are migrated into the UNIX/Linux /etc/passwd and /etc/group databases. These entries must therefore be present, and correct options specified, in your smb.conf file, or else the migration does not work as it should. " how to specify these (with correct options) in the smb.conf file? what are the parameters?
View 6 Replies View Related1. I have two domains domain1.com and domain2.com on my centos server.
2. In a file in domain1.com I am writing the php function
chdir('/var/www/vhosts/domain2.com/httpdocs'); but it is not working at the same time if I am trying to change the directory to one of the subdirectory in domain1.com than it is working means chdir('/var/www/vhosts/domain1.com/httpdocs/css'); is working.
3. The problem is I cant able to change the directory from domain1.com to domain2.com. /var/www/vhosts/domain1.com/httpdocs => /var/www/vhosts/domain2.com/httpdocs is not working
Is it some permission issue or anything else ? Is it something related to chroot jail or what?
I'm running CentOS 5.4 with sendmail. My computer hostname is bob.domain.com. Whenever I would nc -v 127.0.0.1 25 into sendmail I would get bob.domain.com on the banner. Whenever I send out email the emails would be user@bob.domain.com. I wanted the email to show up as user@domain.com. So in the etc/mail/sendmail.cf file I changed the line
Code:
Dj$w.hostname.com
to this
Code:
Djhostname.com
Now when I enter sendmail I see domain.com in the banner so I know the change took place. However, when I send email using
Code:
mail -s "test" xxx@xxx.com
then email still goes out as user@bob.domain.com. What other changes do I need to make?
I have a question for installing centos with domain and ip address.I want to install centos 5.3 at my server which is installed redhat 9.My question is how to sonfigure domain and ip.
View 4 Replies View RelatedI already setup my samba, openLDAP as well as smb-tools but when I try to registered my winXP client into Linux Domain,there was an error "a device attached to the system is not functioning" but browsing of user folder is possible, by typing in run command \server1 then provide a username and password.I can also transfer some documents on that folder, only registering from linux domain is my problem...
View 1 Replies View RelatedI have a CentOS 5.2 server with hostname support.companyname.local It's used to run Request Tracker 3.8.1. I need to be able to send email from this machine and make it look like the email came from user@companyname.com instead of user@support.companyname.local
View 5 Replies View RelatedI need to start a xen domain from console with xm command but the 'new' sub command is missing?
[root@sambie xen]# xm new CENTOS-5.3-PDC
Error: Sub Command new not found!
way to connect my CentOS server to my Windows domain.
View 2 Replies View RelatedI have setup Ubuntu servers as LAMP machines but that's pretty much it.
I need to work on an existing CentOS server that I will see for the first time tomorrow. I am told that, as of right now, it is "just serving the internet." The goal is to set it up to be a primary domain controller by which I mean:
1) A user should be able to login to the server from any of the workstations and then see their server stored documents
2) The clients will be a mixed bag of Linux, Windows and Mac machines
I could use a push in the right direction as to what I need to do to get this all setup. I know how to setup users and home folders (I use webmin typically and I understand that there is a version for CentOS) but clearly there is more that I need to do. I am really curious as to how I would map the necessary drives on the client machines upon login and have the users have automatic access to their data regardless of the client machine they log in to.
Tutorial for setting up a
domain server, dns server, ldap, mail server, firewall and proxy
with centos and how can I join ubuntu clients to the domain?