Networking :: Server Connection To Outside World?

Sep 17, 2010

Got a few servers runnning and they all connect fine to the net. Each are running with a static IP provided by my ISP. But I have one server were I re-installed Debian Lenny - or tried to. At the stage were it wants to connect to a mirror it cannot due to network problems. I tried a new install leaving it behind a router. This solved the problem and it connected. Tried once more directly connected to a static IP and same problem happened - it got to the point with the mirror. Tried changing the settings after the installation through the router. This is what I get from ifconfig :

[Code]...

If I ping it from one of my other servers it shows as OK and can also ping my other servers from the server in question, but if I ping google.com it times out (fails). The IP 92.62.196.77 is in the range that I can use. Checked that with my ISP. Just to make sure I tried disconnecting one of the servers that I have working and changed the server in question settings and still it came out with the same problem.

View 6 Replies


ADVERTISEMENT

Networking :: Open Namp Ips For All World In Server?

Feb 12, 2010

coz my server blouked ip so i need to open to get all ips in world

View 4 Replies View Related

Ubuntu Networking :: WebServer 2008 On Server Not Reaching Outside World

Apr 7, 2010

I have a Belkin N router setup with a virtual server to port 80 to 192.168.2.2 which my server sits on.

However, for some reason, I can get to the server from other PC's on the Router, but from outside, it will not port to the Server?

Any ideas on how to setup this?

I have Windows Webserver 2008 installed running on a 3.0GHZ Server.

View 2 Replies View Related

General :: Accessing Web Server From The Outside World?

Jul 4, 2010

I have successfully installed "LAMP" and can get to my web server by typing 10.0.2.15. How can I make it so that when I type in my domain name it brings up my web server?

View 1 Replies View Related

Server :: Cannot Receive Mail From Outside World?

May 10, 2010

My mail server stop receiving mail from the outside world. I need to ask you about the required logs, that I need to perform.

My systems is:
Code:
Linux Centos 5.4
Postfix
Courier-IMAP

View 1 Replies View Related

OpenSUSE Network :: Access To NX Server From Anywhere In World

Jan 5, 2010

I have run into a problem using FreeNX in combination with public key authentication. I have Googled myself silly, but I can't find the exact answer to my problem. I am hoping that someone here will know the answer. First, let me tell you what I am trying to accomplish:

- I don't want my ssh server exposed to the Internet with password logins enabled. I only want public key authentication.
- I want to have access to NX server from anywhere in the world.
- I want NX to use a custom keypair, not the default supplied by FreeNX.

My environment:
openSUSE 11.2 (client and server)
KDE 4.3.4 (client and server)
FreeNX-0.7.2-26.5.i586 (server)
openssh-5.2p1-9.1.i586 (client and server)
NX Client for Linux 3.4.0-5 from NoMachine (client)
qtNX Client qtnx-0.0.1SVNr281-215.1.i586 (client)

The login problem persists, whether I am connected to the same network or to another network. Since ssh logins work, I don't think a firewall is the culprit. What do I have working so far: - The ssh server on the remote host only accepts public key authentication and I can login from the client without problems. So far so good. - FreeNX is installed on the remote host, using a custom keypair.
Authentication with this key works. I can login from the client with the nx user and the public key.

[code]...

View 3 Replies View Related

Server :: Apache 1.3.33 Deny Outside World - Allow Network Only?

Mar 11, 2010

I can't seem to set this older server right to deny outside access while I build a website on it. What I am trying to accomplish is deny anyone outside of my network access to the website, but replace the 403 error with a temp page letting them know it is coming soon. I have googled for hours and everything I have tried just denies me as well. Seems to be all or nothing.

My last attempt was:
Code:
<VirtualHost *:80>
ServerName www.mydomain.com
ServerAlias mydomain.com
ServerAdmin me@mydomain.com
DocumentRoot /home/me/www/site
ErrorDocument 403 /temp.htm

<Directory />
Options FollowSymLinks -Indexes Multiviews
AllowOverride None
Order Deny,Allow
Allow from 192.168.0.*
Deny from all
</Directory>
</VirtualHost>

View 11 Replies View Related

Server :: Postfix Not Receiving Email From Outside World

May 7, 2010

i can't receive outside emails on a postfix server. i was able to get it to send emails with help in this thread. i can telnet into it via localhost, but not via domain name.

View 8 Replies View Related

Server :: SFTP - Folders Become World Writable?

Jan 21, 2011

My website, IsleDiscount.com, is hosted on a virtual server with pair.com. Pair.com offers only one SFTP account on regular shared server and to set up mutltiple SFTP accounts, Pair.com moved me to a virtual server (VQS1), which I believe is not a shared server solution, but Pair representatives were able to create multiple SFTP accounts on this VQS server.

However, when I asked the representative to restrict access of this additional SFTP accounts to a sub-folder, I got the following warning email: confirm you understand this will make your entire web directory world-writeable. This will increase the chances of a security attack. If you do understand this, you can go ahead and execute the command yourself. The command below will accomplish both commands in one.

[Code]...

View 1 Replies View Related

Fedora Security :: Server Seems To Attack The World Hacking?

Apr 10, 2009

I went away from home for a few days, ... Now I am back at home and noticed, that my server is going out with 100% available bandwidth. The server is mainly Http / Ftp / Mail server, so I stopped all services, to see which one it is. ervices stopped, still 100Mbps go out like ants in the flood.

I updated the system, made a backup, installed IPtraf. It seems that I have something 'installed' and my server is running something to attack User computers. It seems to try to find something on random IP's random ports. I am a little bit confused now. As long as my sites are running, I'm ~OK~ but sooner or later I would like to have my bandwidth back. How could I try to hunt down which service/app/process got hacked?

It seems that the monetary system of our society got now more enemy's than friends. Capitalism seems to reach it's end. But my server is serving also ART! Sooner or later we will need to pay copyright even for our thoughts. I was reading today, that the French president wants to punish file sharing as his wife made 3 albums, and wants to get some money ..

View 12 Replies View Related

Server :: Hide Outside World Local Ip SQUID PROXY?

Feb 9, 2010

i built a new basic squid proxy server. so when i check my ip from internet various website. it shows my local ip address.

1) how to know squid proxy mode working in which mode, like tranparent rever or web proxy etc

2) how to hide all local ip from outside world, let our isp proxy global show everywhere by which traffic go out

View 1 Replies View Related

Server :: World Facing File Sharing Protocol?

Sep 7, 2010

I'm trying to decide on how to host and serve files to multiple operating systems (Linux, Mac OS X, Windows XP and Windows 7) over the internet. I'd like this to be secure (obviously), but don't want to use SSH tunnelling.Ideally, this would be something which could be persistently mounted on the client machine (a network drive in Windows, likewise in Mac OS X and Linux) and wouldn't require the installation of extra software on the clients. I thought about samba, but I'm not sure if it's secure enough to be internet-facing. Would FTP fit?resumably it's possible to have encrypted connections only and limit connections to a specified number of client IPs.

View 2 Replies View Related

Ubuntu Networking :: Connect To Home Pc From Another Pc Out There In The World?

Dec 21, 2010

one is whats the best way to connect to my home pc from another pc out there in the world? be on a windows or linux machine and remote into my home pc. Im using ubuntu 10.10. the other question is, i got a big family who aren't computer savvy at all. Is there a way to remotely assist them if they are on windows or mac. im looking for something similar to the windows remote assistance. With both users being able to see and control the desktop. with the hosts permission. something simple enough so it wont be a whole process to walk them threw to even get connected to in the first place.

View 2 Replies View Related

Fedora :: VMWare Web Server - Can't Access Tomcat On Port 8080 From The Outside World

Jul 29, 2009

I am having trouble getting my FC10 with tomcat visible to the outside world. first off i am somewhat new to linux. I am running vmware workstation to host my linux web server. i have my VMWare setup to use my second NIC solely. it is bridged and the tcp/ip is disable from the host. i can ping the ip address but cant access tomcat on port 8080 from the outside. i can hit it fine from inside fedora. i have configured my router (wrt54gs with DD-WRT firmware) for port forwarding. so basically i think that the problem is somewhere in between the host and the vmware configuring allowing the port to be forwarded through.

View 2 Replies View Related

Ubuntu Networking :: Multifunction Printers In The Networked World?

Jan 23, 2010

So having recently set up my server (including some disk space and ushare, and an additional laserjet printer) I was wondering if anyone had any experience of putting a multifunction printer into an ubuntu server and adding it locally (to the server) then to the networked computers....I know this printer works perfectly (the scan too!) when plugged directly into a machine's USB....I suppose my real question is....does anyone know anything about the scanner side of it?? is this going to work?? I reckon the printer side will (/should - i know the printer works and i know the server can share printers.....lol) but the scanner side is relatively new (when put into the context of shared from my HS.Please note:My server is just running vanilla (plain) ubuntu 9.10....and my compo's are 10.04 and 9.10....ubuntu ONLY network...

View 1 Replies View Related

Ubuntu Networking :: Local Machine Is Not Accessible From Out Side World

Jul 30, 2010

I m using the pc as gateway....i have two NICs:1) 10.6.15.254 ---> for internal network 10.6.15.02) 10.6.0.115 -----> for out side world I can ping and ssh any out side machine but when i try to ping or ssh any machine in the 10.6.15.0 network it says host unreachable.... i can ping and ssh gateway i.e. 10.6.15.254 and 10.6.0.115 but not the client machine in the 10.6.15.0 network from out side world even i flush iptable rules i can not access any client machine i m using ubuntu 10.04 as operating system..

View 2 Replies View Related

Ubuntu Networking :: Regulatory Domain Changed From World To Am / Set It Back?

Dec 21, 2010

I'm using Ubuntu 9.10 on a i386 laptop and have noticed a signal drop while checking my Administration Log File viewer. I noticed on the file starting :-cfg 80211:Regulatory domain World, then another set of frequencies and below that calling CRDA for country : Am
cfg 80211 : Regulatory domain changed to country : Am

My question is-- how do i set it back to Regulatory domain : EU ?code...

View 1 Replies View Related

Networking :: Connecting WD My Book World Network Hard Drive

Aug 7, 2010

I bought a WD My Book World Network Hard drive and are trying to connect it. I am using Suse 11.2 and have it connect wired through a Netgear WGR614 router.I believe I can use Samba?It is working under Windows and it connected as network drive.

View 2 Replies View Related

General :: Lpq Printer 'sdst@other.domain' - Cannot Open Connection - Connection Timed Out Make Sure LPD Server Is Running On The Server

Mar 23, 2011

Linux printing appeared to be working fine up until yesterday. Today typing lpq gives the following: lpq Printer 'sdst@other.domain' - cannot open connection - Connection timed out Make sure LPD server is running on the server

The /etc/cups/printers.conf file is properly set, the printers appear in localhost:631 and they are printing test pages. However, all command line print commands seem to be trying to print to sdst@other.domain I don't know why printers.conf is being ignored and why and how sdst@other.domain was added. Seems like it might have been auto-discovered?

# dit: sdst@other.domain was mentioned in /usr/local/etc/lpd.conf I'm not sure why lpd.conf is being used instead of /etc/cups/printers.conf

View 1 Replies View Related

Server :: Unsure Of Exim Configuration - Accepts Mail From Users On Multiple Domains To Pass On To The Outside World

Dec 29, 2010

I'm in the process of starting a migration from an old postfix server to nice shiney new exim server however there are a few things i'm really not clear on and i'm hoping that some one here could point me in the correct direction. Okay the postfix server at the moment does the follwoing ( i'll try and keep this simple ):

* accepts incoming mail for users on multiple domains and puts the mail in the users mailbox ( external -> internal )

*accepts mail from users on multiple domains to pass on to the outside world ( internal -> external )

Obviously the POP and Imap functions are handled by other daemons.. I'd like to replicate this sort of setup on the new exim box, however the guides i can find only help with configuring the exim system for incoming mails ( external -> internal ) for multiple domains and i cant seem to find a guide that would indicate how to do both ( internal -> external and external -> internal ) on one box. I'm guessing i may have to do some sort of auth to get exim to accept and then handle the internal -> external side of things?

View 1 Replies View Related

Networking :: Connection From MANY VNC Clients To ONE Server?

Jan 17, 2011

Connection from MANY VNC clients to ONE Server?

View 3 Replies View Related

Server :: Connection Sharing Feature - Shared Connection To Server Closed

May 20, 2010

I'm a frequent user of the shared connection feature of SSH. Usually i have two or three connections open at the same time through the connection sharing feature, but sometimes when i try to start another i get the message "Shared connection to <server< closed". All the connection that are established through the connection sharing feature are still active and not closed, but when i try to create a new one i get that message.. i've even got that message when i have only had two connections through the shared connection feature.

I've tried to search google but it doesnt seem like anyone else has had the same kind of problem, does someone know why i sometimes get this error ?

View 1 Replies View Related

Ubuntu Networking :: Server 9.10 Lan Connection Drops ?

Jan 23, 2010

I got a new low power file server (Atom 330 with ion), but didn't enjoy it since.

I installed Ubuntu server 9.10 64bit.

I randomly experience connection drops. As I'm installing and testing, there are lots of ssh windows open, I transfer much data using scp from my laptop to the server (all connected to wired lan).

Connection drops are as follows: ssh windows terminate with "connection reset by peer", but not always all the ssh windows terminate. For example, I edited a mediatomb config using nano, that stayed open even with scp and all other ssh windows cut.

I also have apache2 installed because I'm running urd (a usenet download tool). It seems that when I start the deamon, connection drops. So I killed apache2 to try out but that didn't solve the problem.

I left ping run all the time, and the server is pinging back all the time, which is really strange as I thought that a connection drop means the whole network interface going down.

When this drop occurs, I have to wait 2 minutes until I can ssh back into the server.

I also installed mediatomb, but it isn't really fun to stream a video to my ps3 as it always hangs after 5 to 10 minutes.

Code:

lspci:

Code:

View 3 Replies View Related

Ubuntu Networking :: Establish A Ssh Connection To Server?

Feb 15, 2010

I am trying to establish an ssh connection to my server. I have a regular ssh connection working through the command line, so I know my key works and I have the port forwarding on the router correct.

When I go to Places -> Connect to Server the window comes up properly. The only problem is that the drop down menu only has one option in it for Service Type. It is Custom Location. I have had this set up in the past and there were other options there. I chose the ssh connection and everything was fine. Now it doesn't work.

I have tried to completely uninstall nautilus and reinstall it, but that didn't work. When I did uninstall it, I uninstalled gnome-session as well, and I reinstalled that one too.

View 9 Replies View Related

Networking :: Lan Connection Of Fedora7 With Win2003 Server

Mar 20, 2010

I know that with SAMBA tools we can connect fedora and windows.I also know how to connect fedora7 with win xp.But my problem is,i am using win2003 server.And in this os,i am not able to find the option to share my root directory.I think it is not available in server2003.

So how can i connect fedora with server2003.My fedora pc shows the icon of windows network,but at my windows PC the LAN connection shows disconnected.

I have also tried to share one folder from windows pc.But when i try to open it at fedora pc with open location it says "cant show the content of this folder."

View 2 Replies View Related

Networking :: VNC Connection Through Squid Proxy Server?

Dec 17, 2009

We have two offices suppose A and B. At office A, we use centos 5.3 computer as router and squid proxy server. At office B we use a cisco router to connect to Internet. Computers at office A that has direct access to Internet can access computers behind cisco router at office B using vnc viewer. But computers at office A that can use internet only through squid proxy can't access computers behind cisco router at office B. Is there any way so that I could allow squid clients to access computer behind cisco router at office B using vnc viewer.

View 3 Replies View Related

CentOS 5 Networking :: Locked Out Of TCP Connection On Server

Jun 29, 2009

using a terminal on the server,telenet localhost 25 should connect to my mail server.It times out yet I can telnet remotely to my mailsever and get connected.I removed Iptables and that does change things.what ever is causing this started a week ago fri.I was adding to the iptables.I am still a newbie to Linux and Centos so I probably messed it up.

View 2 Replies View Related

Ubuntu Networking :: 8.04.3 Server - No Outgoing Connection (VMware)

Feb 16, 2010

I'm running Ubuntu 8.04.3 server on my XP Pro SP3 machine using VMWare. I'm trying to set up a static IP address but I can no longer ping anything except my router (not even the XP machine it's hosted on). I'm using "bridged" mode in VMware

Here's my /etc/network/interfaces file:
Code:
auto lo
iface lo inet loopback

auto eth0
iface eth0 inet static
address 192.168.1.50
netmask 255.255.255.0
network 192.168.1.0
broadcast 192.168.1.255
gateway 192.168.1.1

View 4 Replies View Related

Ubuntu Networking :: XP Drops Connection To Samba Server

Apr 7, 2010

In order to get my shares working I first have to connect to the windows shares from the Ubuntu machine. Then I can connect to the Samba shares from the windows machine. If I don't continue to use the shares. It'll drop the connection and I have to unmount the windows shares and start the process over. The wireless network still shows as being connected but I get an error on the windows machine if I try to connect. I've Googled this and it appears to be a Windows problem. I know this is a ubuntu forum but thought I'd ask for any info. I believe that this is also what is giving me shared printer issues as well.

View 2 Replies View Related

Ubuntu Networking :: FTP Server Kill Wireless Connection?

Sep 12, 2010

Ever since I installed and started operating my FTP server, with a wired connection, my wireless connection to my computers has been going in and out a lot. My wireless connection is about a foot away from the router. Is it possible that the wired FTP server is pulling a lot of the internet signal away from my wireless setup?

View 3 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved