I recently installed Ubuntu 10.04, and after I rebooted to finish installing my Nvidia drivers, the bootsplash reset itself to a resolution of 800x600. Is there any way to change it back to 1680x1050?
View 4 Replies
when i was sleeping my computer restarted itself and when i signed back in all the windows were huge. the resolution is set at 900x600 and no other option makes the windows smaller.
View 1 Replies View RelatedAfter upgrading to 11.04 I can't set resolution to 1680x1050. Also Can't get the screens out of mirror mode.
Peter
I'm running 10.04 desktop on a Dell PowerEdge T710 connected to a Dell 22" LCD (E2210). The T710 uses a Matrox G200eW chipset. For some reason, I can't set the display resolution to the native res of my monitor (1680x1050). For what it's worth, here are the contents of /var/log/Xorg.0.log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu
Current Operating System: Linux map-renderer-1 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=95546d53-2465-4192-84e4-ed7d2a6a8491 ro quiet splash
[Code].....
The native resolution from my LCD monitor is 1680x1050, but the list of "NVIDIA X Server Settings" only allow me to set it to maximum 1360x768. The monitor is conected via VGA cable and it is recognized as CRT-0. When I run the 'xrandr' command from terminal, it shows:
xrandr: Failed to get size of gamma for output default
Screen 0: minimum 320 x 240, current 1024 x 768, maximum 1680 x 1050
default connected 1024x768+0+0 0mm x 0mm
1024x768 50.0*
800x600 51.0 52.0 53.0
[Code]....
I performed a clean install of Fedora 13 (LXDE remix) over the weekend, and have been very pleased with it so far. However, I encountered a setback this morning when I brought my laptop into the office and hooked it up to an external Viewsonic VG2030wm LCD monitor. I can no longer utilize the native resolution of 1680x1050, although on F11 I could do so using the commands:
Code:
xrandr --output LVDS --off && xrandr --output VGA-0 --mode 1680x1050
The 1680x1050 mode is listed by xrandr (see below). However, when I run the above command the external monitor repeated alternates between a black screen and displaying my desktop (I'm not sure if the resolution is correct -- it's hard to tell).
[Code]....
I have this 20"-21" Gateway display that has a resolution of 1680x1050, and will not work proper at a lower resolution, it squishes up and does not fit to the desk top but I can't find a way to manually set the resolution. I am using Ubuntu version 7.10.
[URL]
I'm using an nvidia graphic card, as i read before on this forum, to get high resolution in bootsplash i need v86d package - and i installled it and i get back 1680x1050 resolution in bootslash. But the problem with resolution come back after installing cryptsetup package, now i've got 640x480 and i can change it, I trying to reconfigure v86d , plymount, trying update-initramfs -u but with no result.
View 4 Replies View RelatedI was evaluating a live distro on a USB drive and the resolution got changed from my normal 1680X1050 to 1024X768. I normally run SuperOS (ubuntu derivative) at 1680X1050 on my 22" LCD flatscreen monitor. The users manual for the monitor says that the optimum resolution is 1680X1050. Now when I go to system, preferences, monitors the monitor is unknown and the highest resolution that is available is 1360X768. I have clicked on Detect Monitors but not sure anything is happening. I have went to system, administration, additional drivers but none show up. The OSD menu for the monitor is showing 1380X768. I haven't been able to make any changes to the setting. I push the button that is supposed to get me into the sub-menu but nothing happens.
View 3 Replies View RelatedI am relatively familiar with Ubuntu, but some time last week it updated and now ALT + Tab temporarily minimizes windows to switch between open apps and shows a little window with icons representing the open apps. I much preferred the old way of just switching between them without minimizing and the more graphically appealing (I guess to some) window. I have checked Keyboard Shortcuts and it seems that I no longer have that my original option available, is there another way to select that option, or add it back to the keyboard shortcuts or am I just stuck with it unless I decide to back up to a previous release? Hope this made sense, and I won't be able to try any suggestions until tomorrow so please feel free to throw as many suggestions as you want to me and I will try them all one by one tomorrow morning.
View 5 Replies View RelatedToday I wanted to get rid of ugly GRUB and installed GRUB. I really like it, but there is one annoyance - I used these tips:URL...To have a Splash screen in Ubuntu in full 1680x1050 32-bit, and it worked perfectly. But when I installed BURG in the place of GRUB, I have 640x480 ugly boot splash as I had in the very beginning.Repeating the steps doesn't seem to help. What should I do?I should note that I easily changed BURG's resolution to 1680x1050 using 'R' while in BURG. 640x480 only applies to Splash after I choose Ubuntu.
View 2 Replies View RelatedI've been using Ubuntu for about two years now, then suddenly today (after my PC accidently lost power) the screen resolution changed to 800x600 (it is, in fact, a widescreen monitor, and this resolution looked 'zoomed in'). The only two resolutions detected with xrandr were in the 4:3 ratio (800x600 and something worse). I followed some instructions, trying to reset the resolution to 1024x576.
I got as far as
$ xrandr --newmode "1024x576" ...
then,
$xrandr --addmode default 1024x576
but when I
$xrandr --output default --mode 1024x576
I a message to the effect of 'your screen can only support 800x600 or less'. Ah-ha, I thought, you stupid machine; this screen has had a greater resolution for over a year.
And so, from System->Preferences->Monitor, I forced the computer to switch to this new resolution. When prompted, I reset.
My current problem is that when I turn the computer on, the monitor displays a floating 'Input Not Supported' sign. I Ctrl+Alt+F1'd, and now all 'xrandr' and 'cvt' commands return:
Can't Open Display
My first priority is to get the computer back to it's less-broken 800x600 state;
EDIT: I'm running Ubuntu 10.04
A few minutes ago, I was connected to my remote machine running Ubuntu 10.10. I changed the resolution of the screen while connected with VNC, but now I can't connect to the remote machine. How can I fix this without leaving my house?
View 2 Replies View RelatedI have a configuration of:
Intel Pentium Dual Core 2.40 Ghz cpu
Intel DG31PR desktop board
2 GB adata DDR2 (800 BUS) ram
NVIDIA Ge-Force 8400 GS NX84GS series PCI express
It's the first time I was installing a linux. First I collected an extra hdd for the installation. I used the entire drive for ubuntu 9.10 installation. It installed without any problem except the special features were turned off. It was said that the special features and animations would start only if their is a sufficient graphics processor. I picked up a solution and from the hardware drivers option, installed the nvidia graphics card. Problem started when i restarted my pc. The resolution automatically changed into 800 X 600 px. I changed it to 1280X1024 (which is highest for my monitor). But when I restarted again, it again became 800X600 px. And it becomes like this everytime I restart.
so here's the deal. A few minutes ago, I was connected to my remote machine running Ubuntu 10.10. I changed the resolution of the screen while connected with VNC, but now I can't connect to the remote machine.
View 10 Replies View RelatedThat's a picture of my ubuntu 9.1 64bit login screen. The background image I changed myself months after this problem started, so I'm sure that has nothing to do with it. What I DID do that caused this problem was follow the openoffice dark theme fix on this page:[URL]
BACKGROUND: I installed a dark theme that made the openoffice word page black, so I had to find a fix for it on the page above. I'm not using the theme anymore, but it was "Slickness black" on gnomelooks.
In case someone didn't see a problem with the orginal login screen, the section where you click the username and enter your password should look like this:
Also incase anyone was going to ask, my login DID look like the second picture at one point (before the openoffice fix) I just removed openoffice completely and reinstalled it so that isn't the solution.
I installed KDE on my Ubuntu laptop and then got rid of it. I used puregnome which worked but I still have weird fonts in Firefox. I tried adjusting the preferences in Firefox but nothing works. How can I revert it back?I did a fresh install (but kept my home directory) and it made no change. I also removed the .mozilla folder entirely and uninstalled/reinstalled Firefox. No change.How can I get this back?
View 8 Replies View RelatedI just stupidly changed my graphics resolution in System - Preferences - Startup Manager, now i dont get a login window or anything just a black screen. I also disabled the splash but i assume this just gets rid of the ubuntu loading line thingy?
The weird thing is that the resolution was set to 640x800 or something like that in the Startup Manager as default and the laptom im using (an old Toshiba Amilo P4) supports 1024x768. the System - Preferences - Display menu wouldnt let me change any display settings which is why i was messing about here. I havent got any backed up x org file and only a live usb of super os/ubuntu - no cd or floppy drive.
my motherboard has ati radeon 3300 hd and when i install it, after restart, my resolution is automatically changed to something big, and my monitor only supports 1024x768 and if something bigger is selected, the monitor goes NO SIGNAL
what am i supposed to do? i have some driver installed by default, i can utilize compiz just fine, play videos on ..... at 1080p just fine, play World of Warcraft almost smooth, i believe that if that driver is installed, it will be even better, but im afraid that if i install it, my resolution will automatically change to something large and my monitor will go NO SIGNAL
Im running Ubuntu and I recently installed driver for my HD5700 Radeon and been having problems with the display I changed the resolution and now my mouse has disapeared at least I think it was after I changed the resolution. THe thing changing the resolution solved my other problem which was the text was blury or faded. What do I do to fix this how could it just disapear . When I right click the drop down menu does appear but there is no point. I can still open programs up but its seriousy frustrating.
OK so I just went into the terminal and typed compiz it returned: Xgl not present Xset q doesn't revel the location of the log file using fallback /var/log/Xorg.0.log Detected PCI ID for VGA Flags: bus master, VGA palette snoop,66MHZ, medium devsel, latency 64
Checking for texture_from pixmap : not present Trying again with indirect rendering... .. not present aborting and using fallback : usr/bin/metacity
What does this all mean im pretty sure something wrong because I have catalyst up and running and drivers I thought where running correctly.
PS. best instruction to install the HD5700 radeon drivers and catalyst control can be found on the wiki ATI drivers install page for linux
Ok, so here's the deal. A few minutes ago, I was connected to my remote machine running Ubuntu 10.10. I changed the resolution of the screen while connected with VNC, but now I can't connect to the remote machine.
How can I fix this without leaving my house?
I changed may graphic card, earlier I used NVIDIA FX5500 with nvidia driver, now I was trying to use ATI Radeon 7500, but there are problems with graphic configuration. At first attempt server started but after I changed a screen resolution the monitor went blank. I restarted a computer but after the X server started immediately the monitor wnet blank. I found that for completely for me unknown reasons Xorg was trying to use an NVIDIA glx module with radeon driver. I removed this nvidia driver, I expected ubuntu would be able automatically to set up a proper configuration, but instead of ubuntu complained about a missing driver. I also tried manually to set up some basic config using Xorg -configure but after that the Xorg server was stuck.
View 10 Replies View RelatedI'm running Kubuntu, but after trying an Ubuntu tool to help configure Grub, my boot up plash screen (xsplash? My card isn't KMS compliant, so I'm not using Plymouth) now shows the Ubuntu splash.
Anyone know how to switch which boot splash is used back?
Had to restart following an extract crash, and upon restarting, much of my theme, including all my icons had changed. Prior to this I was using the Awoken Icon Set. I've gone through and rerun the Awoken Customization script, but no luck. Simply trying to change my theme, and icons in the theme manager doesn't work either.
View 1 Replies View RelatedIt seems I had some kind of intrusion and I found 6 files changed its ownership to user 1035 and group 1035, I don't know how but I need to change them back to its original owner (root) because one of them is the ls command and the other is the ifconfig how can I revert them to its original state? I cant do it with chown.
View 3 Replies View RelatedI tried adjusting the resolution in Ubuntu so that it would fit better on my screen. The first one I tried worked ok, but when I tried a higher resolution the screen went black. Now I can't see anything on the screen so I can't change the resolution back to where it was. If I hit esc when booting up, is there anything I can do that will change it back to the default?
View 1 Replies View RelatedI am using Ubuntu 10.04 and had the dual monitors all set up using NVidia. When I was leaving my office I intended to lock my screen but instead switched to guest user . . . and now 1 of my monitors from my dual monitor set up has bunk resolution?
I have restarted and am logged in as administrator but I have no idea how to fix the resolution? The dual monitors have always been a problem for me. what in the x11/xorg.conf file I need to change?
I'm using Ubuntu 9.10 on a i386 laptop and have noticed a signal drop while checking my Administration Log File viewer. I noticed on the file starting :-cfg 80211:Regulatory domain World, then another set of frequencies and below that calling CRDA for country : Am
cfg 80211 : Regulatory domain changed to country : Am
My question is-- how do i set it back to Regulatory domain : EU ?code...
I use Ubuntu 10.04. I'm not sure what other info is relevant, Gnome, I suppose.
Yesterday I installed wine-1.2 (using Synaptic), in order to be able to build programs for Windows. This in itself seemingly succeeded, but as a result of the installation, fonts in Firefox changed (one can say immediately - when the installation was done, the fonts had changed).
For example, in this forum, the non-monospaced font changed in some way I can't put my finger on. Right now, posts feel less readable, but getting used to it may just be a question of time.
Some other pages (in existing tabs, and when looking them up again) changed the font size, some increased the size, some decreased it. This can be fixed by using Ctrl-+ or Ctrl-- quite easily, but <whine> I would like these kind of changes not to happen at all </whine>.
I uninstalled wine (not removed completely - I don't know what the difference is), but this didn't undo the font change.
The font settings within Firefox (Preferences) don't seem to have been changed.
The point of this post is to ask what may have happened, where such dependencies between fonts are stored, and how to undo the change, in case I'd like to.
I did a bunch of updates, in sid, no issues. But when I rebooted the next day the log in had chanded. No problems logging in, the appearance had changed, and you now have to use the mouse to click on your name to open the password box, where before you could hit enter and get the same results. It is not much, but I have been trying to to restore it back with out much luck. I've played with gdm and gdm3 and a couple of other things but no luck. I did see a update for log in but have not been able to figure out the next step.
View 1 Replies View Related
