Around with my Login default screen and set my login to "Ubuntu (Safe Mode)". Now, it seems as if the system does not grant me the authority to change it back to another default login.
View 5 Replies
That's a picture of my ubuntu 9.1 64bit login screen. The background image I changed myself months after this problem started, so I'm sure that has nothing to do with it. What I DID do that caused this problem was follow the openoffice dark theme fix on this page:[URL]
BACKGROUND: I installed a dark theme that made the openoffice word page black, so I had to find a fix for it on the page above. I'm not using the theme anymore, but it was "Slickness black" on gnomelooks.
In case someone didn't see a problem with the orginal login screen, the section where you click the username and enter your password should look like this:
Also incase anyone was going to ask, my login DID look like the second picture at one point (before the openoffice fix) I just removed openoffice completely and reinstalled it so that isn't the solution.
when i was sleeping my computer restarted itself and when i signed back in all the windows were huge. the resolution is set at 900x600 and no other option makes the windows smaller.
View 1 Replies View RelatedHad to restart following an extract crash, and upon restarting, much of my theme, including all my icons had changed. Prior to this I was using the Awoken Icon Set. I've gone through and rerun the Awoken Customization script, but no luck. Simply trying to change my theme, and icons in the theme manager doesn't work either.
View 1 Replies View RelatedMy last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
Ubuntu 10.04 installation takes me to a blank (monitor away) screen. I have followed Google searches and forums and have tried all the nomodreset & radeon.setmode=1 stuff on command line and have failed. If you press F6 on the menu and play with the options you would see that half the options do not work even if you select them. Why even have "nonodreset" as an option when it does not do anything? Did the developers not once wonder that having installation that is not based on grapic driver (that is text based or safe mode based) would be the way to go. Go ahead and Google "Ubuntu installation blank screen" and you will see that this is a pretty massive problem.
View 3 Replies View RelatedSomething has changed all my file permissions to read only and when I try and change them back it wont let me. Is there something I can do i Nautilus to correct it?
It even effects the waste basket-all the stuff in there is now read only and when I delete items I get a file operations window, which comes and then goes like its deleted them, but they re still in the waste basket, doesnt show an error message like it does if I try and move any other file.
I just installed xubuntu-desktop on my Ubuntu 9.10 desktop, just to have the option of using xfce ( I did the same with Kubuntu - kde). I have noticed that the Xubuntu splash screen now comes up rather the the Ubuntu default splash screen.
I tried to use Start-Up Manager to changed back to Ubuntu but Xubuntu xsplash screen ( one with the fire flies ) still comes up. Is their any way to change this back to the Ubuntu Splash Screen without the Xubuntu screne coming up at all ??
I have installed VirtualBox and setup a Windows Vista host, initially with a .vdi of 10gb. That filled up quickly, so I added another 20gb secondary partition, after first trying to allocate a .vdi to a SCSI controller. Configured the drive in Windows (Computer Management), and all seemed ok. I shutdown VB, and rebooted my Linux host (openSuse 11.3). Now I keep bouncing back to the login screen, and can't login to Linux KDE, but can login to a console.I do have the following info:
/etc/fstab:
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part5 swap swap defaults 0 0
/dev/dis/by-id/ata-ST9250410ASG_5VG0B5VS-part6 / ext4 acl,user_xattr 1 1
[code]....
I did see a message before, that I don't see anymore, that said it could not start NFS services due to missing entry in fstab. Another I'm seeing now is it couldn't start the avahi-daemon, no space left on device. This is odd, since I have a 200GB drive, with half of it left, only max 30GB set to VB. Here's my df -k output:
/dev/sda6 Use% is 100%
devtmpfs Use% is 1%
tmpfs Use% is 1%
/dev/sda7 Use% is 46%
So root "/" is mounted on /dev/sda6, which looks like it could be a problem, but why would this suddenly be a problem after working with VirtualBox? Could this be a matter of just freeing up space on /dev/sda6? Like the /tmp folder that's under "/"?
Naturally a Windows user, because all of my computers were with pre-installed Windows and I was young.. and I get used to it..In the time of.. growing up I became programmer and learnt how bad is actually Windows coded. Not only that.. Linux has better support for developers.So.. I was Windows user till yesterday. I finally decided to work on Installing Linux or more specifically - Debian.I love everything part of the GNU - GIMP, GTK+, Gedit, GCC...
Well I can't use my PC, both of my operation systems are non-functional.Windows get stuck (which is something completely typical for Microsoft stuff) on Windows logo screen, or safe mode loading files..Debian installation is messy.Firstly I installed Debian 6.0 on a Virtual DVD Disc mounted. I followed the installation process strictly and move forward to Debian startup.It asked me for account. root as "username" and the password as "password" didn't work so I logged in as "localhost" normal user.
However.. I started to realize that I actually also had to install the Graphical Environment in order to have Debian with the desired GNOME Desktop.. I went to aptitude to install the Graphic Environment Package but it said that I have no root rights.. I tried to log-in again, using the correct details but failed.I tried to get in, using the sudo command, but the sudo command also didn't work. Of course.. since I can't install packages, I can't either install sudo."su -" or "su" also prompt me to select a password which I apparently have no clue of.
Then I went to Debian Recovery, because there I was logged as root. It also pointed out that "Root Account is locked". I went to install packages finally.. But when the installation started to proceed It asked me for disk insertion in a specific folder?There I got lost completely.
I have installed Ubuntu 9.10 on my Dell GX240. I have severe difficulty logging in. If I try to login on GNOME or GNOME fail safe mode , I just cant get in . I keep getting the login screen again. I am able to go into terminal mode. Sometimes I have to try upto 100 times to login in GNOME or failsafe mode. Once I am in everything is fine. Is there a way to do some troublshooting? Also transfer to USB sticks is very slow - sometimes as slow as 1MB per min. Is this normal with Ubuntu?
View 3 Replies View RelatedHow can be changed GDM login screen in Maverick?
View 4 Replies View RelatedI have just did an upgrade from 9.04 to 9.10. I am planning to go to 10.04 . After the upgrade everything was ok but I noticed the GRUB was still legacy. So I updated my GRUB to GRUB2. Now when I boot, after entering my logon-id and password, it just brings me back to the login-id screen (to logon on). Any indication of what is wrong and how I should fix this ?
I have no encryptions. [added comments] Currently reading thread about login loop bug with 9.10 Followed instructions about possible missing pre-release update but even if it did do updates, I am still login screen looping. Doing additional researches until someone answers with the fix.
did :
CTRL + ALT + F1 switch to one virtual console
sudo service gdm stop
[Code]...
When I try to login with my username, the one I created when I installed the OS, it seems to try to login but almost immediately kicks back to the login screen. No authentication error it just seems to just logout? The only change I made since last successful login was to add ". .alias" to the .profile file - the only entries in the .alias file are comments and "alias" commands. I have one other username but it is not in the sudo's list of users so I can not change anything in the master login.
View 3 Replies View RelatedEvery account every option I try. when I login, it just cycles back to the login screen. I have attempted to do a repair install, but to no avail. it happens when I try to boot normally or if I boot into failsafe.
View 10 Replies View RelatedThe graphical login screen is loaded just fine. Though very shortly after (a moment after the loading screen could be seen) it crashes back to the graphical login. And that happens no matter what wm I'm trying - gnome, kde3, kde4, e16, e17, even twm.
It happened after the logout after a zypper up yesterday morning. Looking through the list of what packages were upgraded (two machines, both last zypper up'ed last Sunday, checked on the second one after the problem with the first one), the only packages which might be responsible are kwin or qt4.
The graphics card seems to be fine (NVidia 9600), as it happens whether or not I use nv or the propietary driver. Also tried reinstalling it from the repo as well as using the binary blob from NVidia. Has been tested on Windows and games are running fine there, so it shouldn't be the card.
What is strange, is that when calling upon sax2 -r from runlevel three, the initial screen loads nicely, but sax2 crashes back to the cli once one presses 'Change Configuration'. No error messages are being printed.
Any pointers on how I can narrow down the cause (and get it fixed)?
Packages:
OpenSuSE 11.2 + KDE 4 factory & enlightenment & qt 4.6 repos
X.Org 7.4-35.3
Kwin 4.3.98-406.6
libqt4 4.6.1+4.6.20100202-1.1
[Code]....
how do I make grub boot to allow me to choose, like safe mode and normal mode and all that second, how do I do automated back ups (preferably using file copy) for something like every sunday at 11:00 am using the command line, i use to know but forgot.
View 1 Replies View RelatedI attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies View RelatedWhile I was away from my computer a friend changed my keyboard layout to a random layout thinking he could revert it via mouse actions only. Unfortunately, by the time I returned, my screen was locked. Now I cannot unlock my session to get back in to the KDE session to restore the correct keyboard layout.
However, I can log in to a console. In the console (e.g., Ctrl-Alt-F1), the keyboard layout is unchanged, so I can edit any text files and make any other changes required. How can I change the KDE keyboard layout from a console? I'm running Kubuntu 10.04. There is no .kderc file in my home directory. And Xorg.conf doesn't contain the settings either. I'm not sure where else to look.
I did a clean install of xubuntu 9.10. I set up an account for my wife on it and now everytime I try to login under my own it keeps going back to the login screen. Sometimes twice last night I had to log in 4 times before it went to the desktop. I have played with some live CD's of ubuntu and xubuntu, but this is the first full install I have done. Before I set up the wife account, I could login first time. Should I try and reinstall and hope for the best or is there something in terminal that could be done?
View 8 Replies View RelatedI would like to post my problems here with Fedora 11 regarding that I am using Dell inspiron 1525, Dual core-N series. I have got two problems:
First;- After I updated my system, I have experienced a a login problem , which is each time I try to login and insert my password correctly it seems that it will login but it comes back to the same login screen as if I did not do anything, but after too many times it works.
Second: I read some posts in a website that talks about configuring the RPM fusion "Repo" and I did all the steps posted there , but after that whenever I try to update or download anything through terminal.... it appears the following:
[Code].....
Clean install of 10.4 I select shutdown and it takes me back to the login screen. Trying to shutdown from that screen does the same.
View 9 Replies View RelatedFirst of all not sure if this is the correct forum but anyway.Ok well i installed this theme because i liked the look of windows 7 (http://gnome-look.org/content/show.p...content=113264).So i ran the GUIUninstall.sh and it seemed to work but the login screen still has the theme i was wondering how i could change it back to the defualt one.
View 2 Replies View Related1st Problem:The problem that I am having is for Ubuntu 10.10. When logging in for some reason it will:1. Login and play the Ubuntu login sound.2. Will start loading the desktop and panels.Right after #2 it goes black and kicks back to the login screen. I am not sure what to do since it constantly does this. It renders the computer useless if I cannot get passed the login page. Yes the username and password are correct.2nd Problem:Before this 1st problem occurred this has also been a problem that has not went away.When I used to be able to login to the desktop I have just the panel on the top of the screen with the traditional Ubuntu "start menu", "system", etc. For some reason the right side which is the other half of the panel will not load. The only solution which fixes it while I am on the current session is to right click the panel and click Minimize/Expand button which toggles to center the panel on the top of the screen. Now when I click Expand its like the problem never happend, but this only fixes it for that session.
View 9 Replies View RelatedI have Natty, and from time to time Computer goest back to login screen. Is there any reason for this?
View 4 Replies View Relatedi used to have 9.10 but now upgraded to the latest version. Back then I changed the background to full black for both the preboot screen and login screen.Now after upgrading it changed it to the purple color screen. I am wondering how I can change back the background color?
View 1 Replies View RelatedMy problem is basically that when I boot for the first time after a fresh installation and setup, I am always stuck at the login screen or thrown back to it. No matter what account I log onto, whether it's 'root' or any other user account I have setup, it would attempt logging in, black out the screen, turn my monitor off then on again and I'm back at the login screen. This is all using the graphical interface of course. I'm having this same problem with all the linux distributions that I've tried so far:
Gnome Sabayon Mandriva 2010-I've even tried changing all the different boot environments, and same problem Open Solaris and Ubuntu won't even install. It just sits at the loading screen. Why would this happen? I've tried all these OS's on my regular PC, which is a dual core, 4 gb of ram, and they've worked perfectly. So why wouldn't it run properly on that other PC?
I tried applying an emerald theme yesterday, and when I did, it somehow affected the login screen, now it looks old and crappy like win98. I tried disabling emerald and even uninstalling it, but the login screen remains crappy, how do I get it back to the way it was?
View 5 Replies View RelatedI had Kubuntu 10.04 installed, I screwed up a bunch of stuff in it and it would hang after the login screen. I reinstalled Kubuntu 10.10 (formatted the partition with Kubuntu on it) but I kept my /home partition in tact. NOw, when I log in, i starts to load, and then KICKS ME OUT, back into the log in screen. The user does exist, I can access the user from the console, but when I try to get into Kubuntu, it kicks me back out to login. What on earth is going on? I've tried failsafe mode as well as regular login. neither works.
View 2 Replies View RelatedI would to change to bigger than current screen mode. On my laptop display is current for 1366 x 768.I will to add new size of next bigger resolution.. i need space of desktop. I want to add : But it has problem it can not work.
I tell about size new resolution:
1366 * 1.5 = 2048 == 2048
768 * 1.5 = 1045 >= 1044
Depth: 32
Reflective: 60, 75 hz
[Code]...
