Ubuntu Networking :: Multifunction Printers In The Networked World?
Jan 23, 2010
So having recently set up my server (including some disk space and ushare, and an additional laserjet printer) I was wondering if anyone had any experience of putting a multifunction printer into an ubuntu server and adding it locally (to the server) then to the networked computers....I know this printer works perfectly (the scan too!) when plugged directly into a machine's USB....I suppose my real question is....does anyone know anything about the scanner side of it?? is this going to work?? I reckon the printer side will (/should - i know the printer works and i know the server can share printers.....lol) but the scanner side is relatively new (when put into the context of shared from my HS.Please note:My server is just running vanilla (plain) ubuntu 9.10....and my compo's are 10.04 and 9.10....ubuntu ONLY network...
View 1 Replies
ADVERTISEMENT
Dec 23, 2009
I have recently replaced an older server with a new Intel Xeon quad-core processor. The old machine was running FC6, the new machine is running FC11 64Bit. The problem that I am having is that printing to networked printers prints 2-3 pages, then waits 8-10 seconds and then prints 2-3 more pages. This repeats until the printout is completed. My first thought is that FC11 (or somewhere between FC6 and FC11) introduced some way to limit activity to devices? The confusing thing to me is that I went from a single CPU to a quad core machine, increased the memory from 1Gb to 3Gb, moved from a 32 bit machine to a 64 bit machine and I am running the same applications... they just run slower now...
View 10 Replies
View Related
May 3, 2011
I have made an EPSON RX500 multifunction device (printer/scanner) available over my router with the lpd protocol. Both PCs (ubuntu 10.04 laptop wireless, 8.10 desktop wired) connected to it can print, but not scan, since XSANE does not recognize the scanner over the network. It does hoverer both, scanning and printing, if connected with an USB cable. How can i configure xsane to recognize my RX500 over the network?
View 1 Replies
View Related
Jan 28, 2010
I've been using Kubuntu 9.10 for several months now. For most of that time, I configured and used with no problem several network printers.. a HP LaserJet 3015 at home connected to a Windows machine, and a Xerox Phaser 8560 at my coworking space connected directly to a router.
However, several weeks ago I was at the coworking space, requested a print from my web browser, and in the printer selection dialog, observed the list of printers expanding... some sort of autodetection of network printers was occuring, and multiple instances of the same printer were being offered, with slightly different names. Printing to these devices did not work.
Now, after a reboot, there are NO network printers available no matter what network I'm connected to. When I use the Kubuntu printer configuration tool and try to set up a new printer, it asks me to "Select a connection" to which the only option it gives me is "Other". When I put in an address for the printer it just cycles endlessly, never finding anything.
View 3 Replies
View Related
Oct 9, 2010
I have a shared printer on my Ubuntu 10.04 machine, and it cannot be seen by other computers (macbook, pc) on the network. I have the printer shared, but it is not a member of the 'Shared Printers' group. When I add it to the 'Shared Printers' group, it stays there until I close the 'Printing' application GUI. Then, when I re-open 'Printing,' it is no longer in that group. I think this is why I can't see it on the network, due to the wording of the option in Server Settings to 'Publish shared printers connected to this system.'
View 3 Replies
View Related
Sep 2, 2010
I will be running a network of +- 35 Ubuntu pc's from next year on. I have already started setting up remote desktop viewing utilities, but I now need a way to remotely shut down all the pc's at the same time, with a simple command as Admin. Setting up scripts to execute at a certain time is not gonna help, as the online time wont be the same all the time. I want to avoid having to remotely shut down each and every pc, as this will take quite a lot of time.
View 3 Replies
View Related
Dec 11, 2010
Ok here is the deal, I am allowing my neighbor access to some networked folders on my ubuntu file server in exchange for access to their washer & dryer. I have already created mapped drives on their xp machines but now I want to only allow them "read only" access so they don't accidentally delete anything?
View 6 Replies
View Related
Jan 14, 2010
If I DL something from the Internet It askes were to save. This is normal however even though my 2 computers are nicely networked I can't seem to navigate to the network to save onto the other computer.
View 6 Replies
View Related
Aug 8, 2011
I have developed a site in localhost in my laptop. Here are the specs: Ubuntu 11.04, Joomla! 1.7, Db Ver: 5.1.54-1ubuntu4, PHP Ver: 5.3.5, Web Server Apache/2.2.17
This laptop is connected to a wi-fi network. Task: I like to see this local site from my laptop to other desktop computers in the same network. I understand that I need to do some changes in /etc/hosts what changes I need to do to be able to see my localhost site in the network.
View 2 Replies
View Related
Jun 14, 2010
My friend has a Windows 7 desktop with a large data hard drive which is set up to allow other users to connect to remotely, such that they have read and write access. To set up a connection from another Windows machine, it is as simple as right clicking in the My Computer window and selecting "New Network Connection", then entering the information requested.
The information my friend as given me is:
- The IP Address
- The Hard Drive's Name
- A Username and Password
View 3 Replies
View Related
Mar 25, 2011
Back in school I remember using an application that would identify active IP addresses on a network, and basically show you a log of activity. We actually monitored another lab and went in and showed them what we saw (all the machines had IP addresses on the monitors.) We could see websites, bandwidth, etc.
I'm trying to find an application that would do this again. I've been trying to monitor my networks to see what machines are performing unauthorized operations. ISP is showing high bandwidth usage and there is no way checking email and browsing is using this amount, 200GB a month! Something is going on here.
View 7 Replies
View Related
Feb 21, 2009
I want to find the MAC address of another pc connected to my pc through LAN. That PC is showing GRUB load error so i cant boot it.
Can i find its MAC address through my PC? Both PC's are connected in LAN.
View 1 Replies
View Related
Apr 21, 2010
I have a machine running Ubuntu 9.10 that has an external HD with shared folders music folder and media downloads folder). I have set up SAMBA on that machine.
On my laptop I am running a dual boot system with Windows Vista and using wubi install, Ubuntu 9.10.
In Windows, I am able to wirelessly connect to the shared folder and access the music folder and the media downloads folder on my Desktop Ubuntu machine. All is good.
When I boot in Ubuntu, I am unable to connect to the shared folder under Places > Network I can negotiate to the MSHOME (the name of my work group). Once selected I get the error Failed to retrieve Shared List from server error message.
View 2 Replies
View Related
Aug 16, 2010
i don't have much space on my individual computers, so i have to keep my music files on my laptop with most of everything else on my PC. i want to have rhythmbox play music from my networked laptop, but i have a few issues.
for one, my laptop doesn't show up in Places --> Network
two, even if it did. i'm not exactly sure how i could get rhythmbox to do that. would i have to use SSH? connect everytime?
View 5 Replies
View Related
Feb 15, 2010
I've had Kubuntu 9.10 32-bit running on my laptop since it came out, but in the past month all its networked printers have disappeared from the configuration, and I can't set up any more. I've been through the forums again and again and cannot fix it. I've installed and reinstalled lots of packages related to CUPS but it doesn't seem to make a difference.I'm not sure what has happened, but I have lots of clues. Since I'm reaching the limit of my know-how here, I'll just list all the clues.
I'm pretty sure the problem is in my Kubuntu laptop, because in my SOHO setup I also have a Kubuntu 9.10 desktop (this time 64 bit) connected to a printer, and I have successfully printed through that from both a Windows XP laptop and a Xubuntu 9.10 box.On the Xubuntu 9.10 box, I just asked for the GUI print configurator and it automatically detected the network printer. No muss no fuss.But on the Kubuntu laptop, when I go into the print configurator, here's what happens:
- it shows two options, "new printer" and "server settings" (image a.png)
- entering "server settings" everything is greyed out and unchangeable (image b.png)
- entering "new printer" shows only one option for a connection, "other" (image c.png)
- after entering the address of a printer i know works (image d.png) the configurator has detected the printer (image e.png)
- but then attempting to move forward it crashes with no explanation.
Running the non-kubuntu version of the configurator GUI provides a bit more information before it fails. When I try to access the desktop with the printer attached it wants a username and password. (which wasn't necessary for the two client machines who successfully printed.) And at the end of the process there is an error: "there was an error during the CUPS operation: client-error-forbidden".
Two more clues:
- when I try to go with my browser to localhost:631 the browser can't establish a connection
- but I can see the cups page on the printer's host machine at 192.168.0.104:631 no problem.
View 2 Replies
View Related
Jun 18, 2010
I recently had to reinstall Ubuntu (due to a crash after an update) and I'm having trouble to configure the print server. The last time all I had to do was to follow this:
- System;
- Printing;
- Server;
[code]....
Then I would go to the Windows box and add the printer like this:
[URL]
And it would work perfectly. Now I've been tweaking everything I can imagine and no luck.
View 2 Replies
View Related
Jul 28, 2010
Is there an ink level app that works with network printers? I am currently using Ubuntu Lucid x64 with a Canon MX860 printer that was installed using this tutorial: [URL]. Everything seems to work fine (it prints) but I cannot get any of the ink level apps to work (Mtink or Inkblot). After doing some research, my conclusion is those apps only work with USB connected printers. Is that true?
View 3 Replies
View Related
Dec 21, 2010
one is whats the best way to connect to my home pc from another pc out there in the world? be on a windows or linux machine and remote into my home pc. Im using ubuntu 10.10. the other question is, i got a big family who aren't computer savvy at all. Is there a way to remotely assist them if they are on windows or mac. im looking for something similar to the windows remote assistance. With both users being able to see and control the desktop. with the hosts permission. something simple enough so it wont be a whole process to walk them threw to even get connected to in the first place.
View 2 Replies
View Related
Mar 1, 2010
I have Ubuntu Server 9.10 up and running as my file server. However, it sits amongst other PCs running XP Pro and Network Printers (e.g. Xerox Docuprint C2535A) on the network. My question is whether there is a way of adding the Xerox printer to the Ubuntu Server so that other PCs will send print jobs through the server. I think the printer is windows-based printer. Is it possible to do this? or are there any other options that you may be able to share with me?
View 3 Replies
View Related
Mar 18, 2010
Can I share Folder & Printers on 9.10 Desktop? I want to use that shared folder & printers from windows.
View 1 Replies
View Related
Apr 15, 2010
I need help setting up network printers I have two computers, they both have ubuntu on them. The internet comes in to the first computer on a usb modem, it is routed out from ethernet to wireless. I used CUPS on computer two and printed out a test page that worked, but it won't print out anything else.
View 1 Replies
View Related
Jun 26, 2010
I have 3 home computers. Two of them are dual boot Windows and Ubuntu. The third runs only Ubuntu. I want to share files and two printers among the three machines. What is the best approach to doing this.
View 4 Replies
View Related
Sep 16, 2010
I have a LAN made up of three dedicated Windows computers and a Windows VM running on my Linux box. All the Windows systems share files and printers and I want my Linux box to be able to do so also.
View 11 Replies
View Related
Sep 17, 2010
Got a few servers runnning and they all connect fine to the net. Each are running with a static IP provided by my ISP. But I have one server were I re-installed Debian Lenny - or tried to. At the stage were it wants to connect to a mirror it cannot due to network problems. I tried a new install leaving it behind a router. This solved the problem and it connected. Tried once more directly connected to a static IP and same problem happened - it got to the point with the mirror. Tried changing the settings after the installation through the router. This is what I get from ifconfig :
[Code]...
If I ping it from one of my other servers it shows as OK and can also ping my other servers from the server in question, but if I ping google.com it times out (fails). The IP 92.62.196.77 is in the range that I can use. Checked that with my ISP. Just to make sure I tried disconnecting one of the servers that I have working and changed the server in question settings and still it came out with the same problem.
View 6 Replies
View Related
Apr 6, 2010
1. My machine [running Karmic Koala] is part of a corporate LAN with NIC details below
Quote:
2. My routing table:
Quote:
3. The network printer's details [as read from the printer's display interface]:
Quote:
My question:
This printer can be discovered by windoze machines using "Find printers" and then added. [Am not sure how this works!]
But when I try to discover the same from my ubuntu machine, its not getting discovered. Tried pinging the ip [172.20.254.158] which gives the following:
Quote:
Now I tried fiddling around with the route command along with good amount of googling but to no avail.
1. Is there a way I could add that printer to my machine?
2. If yes, how could I? Does it involve adding routes?
View 2 Replies
View Related
Sep 21, 2010
I just setup a Ubuntu CUPS print server. However when I I try to browse to it, it tells me that I do not have permission to do so and does not let me see the printers or any shared folders.
View 5 Replies
View Related
Apr 7, 2010
I have a Belkin N router setup with a virtual server to port 80 to 192.168.2.2 which my server sits on.
However, for some reason, I can get to the server from other PC's on the Router, but from outside, it will not port to the Server?
Any ideas on how to setup this?
I have Windows Webserver 2008 installed running on a 3.0GHZ Server.
View 2 Replies
View Related
Jul 30, 2010
I m using the pc as gateway....i have two NICs:1) 10.6.15.254 ---> for internal network 10.6.15.02) 10.6.0.115 -----> for out side world I can ping and ssh any out side machine but when i try to ping or ssh any machine in the 10.6.15.0 network it says host unreachable.... i can ping and ssh gateway i.e. 10.6.15.254 and 10.6.0.115 but not the client machine in the 10.6.15.0 network from out side world even i flush iptable rules i can not access any client machine i m using ubuntu 10.04 as operating system..
View 2 Replies
View Related
Dec 21, 2010
I'm using Ubuntu 9.10 on a i386 laptop and have noticed a signal drop while checking my Administration Log File viewer. I noticed on the file starting :-cfg 80211:Regulatory domain World, then another set of frequencies and below that calling CRDA for country : Am
cfg 80211 : Regulatory domain changed to country : Am
My question is-- how do i set it back to Regulatory domain : EU ?code...
View 1 Replies
View Related
Nov 3, 2010
I can't install printers shared by a computer running Windows 7, I try to add a new printer using samba, it shows me the other computers but I cant see any printers.
View 4 Replies
View Related
