Ubuntu Networking :: Intel Broadcom - Bcmwl6 - Wifi Driver Unfunctional
Mar 3, 2011
I have a HP Pavilion dv6-2155dx Entertainment Notebook with Broadcom Wireless Lan Driver.
I didn't want to bother anyone with this, but I just could't find a solution. I was happy using Ubuntu 10.04 LTS Desktop Edition, because the wifi was working fine, but I messed everything up dealing with networking in terminal.
So formated and now I have Ubuntu 10.10 Netbook Edition, but that didn't solved my problem at all, because my wifi driver still unfunctional.
Before anything, I tried commands like "dbus restart" and "network restart".
So after reading that I can install by getting ndisgtk and the .inf file, I downloaded the right driver from HP Support's page of my notebook. Extracted the package with Wine (got some error because I wasn't running Win7, of course, but that doesn't matter.).
I did this: [url]
And this is my final result:[url]
Technical informations:
Quote:
View 1 Replies
ADVERTISEMENT
Mar 9, 2011
I have an emachines D620 laptop running Ubuntu 10.10 with a Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01). I havent done anything with it and cant seem to get it to work. I know this because when I had visto on it the card worked, but know it says that its firmware is not enabled and ive tried installing the drivers using the Additional Drivers under Administration. I would like it to be working so I can use my laptop's internet.
View 5 Replies
View Related
Jan 24, 2011
I just bought a Lenovo B560, everything working except the Broadcom 4727 wireless (only in terminal it works)
View 4 Replies
View Related
Jan 12, 2010
I just got my new ubuntu 9.10 os desktop version installed into my lenovo laptop but then my WiFi is not working. Previously I had a broadcom driver which currently is not functioning with the ubuntu 9.10.
View 2 Replies
View Related
May 12, 2011
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b
UP BROADCAST MULTICAST MTU:1500 Metric:1
RX packets:0 errors:0 dropped:0 overruns:0 frame:0
[code]...
View 5 Replies
View Related
Oct 29, 2014
I am having a problem with the driver, I do lspci | grep -i net and this is my driver: Broadcom Corporation BCM4321 802.11a/b/g/n...I have tried this: URL.. (I have debian squeeze) and it created a eth1 interface.I do ip link set eth1 up and after that I do : iwlist scan and it works, but when for example I try iw dev eth1 scan it doesn't work it says nl80211 not found.And when I try to run hostapd (which is my final goal) it also says nl80211 not found.
View 1 Replies
View Related
Aug 29, 2009
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
View 3 Replies
View Related
Mar 6, 2010
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci
00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13)
00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
[code]....
View 9 Replies
View Related
Aug 27, 2010
I've been trying to install the linux driver for my wireless car which is an 'Intel wifi link 4965'. I've followed the literature that Intel provide but I keep running into errors.
(I downloaded the driver from[intellinuxwireless.org/?n=downloads)
View 5 Replies
View Related
May 4, 2011
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
View 4 Replies
View Related
Jan 2, 2010
I have an Acer Aspire 6930 laptop that I'm setting up for my wife with Debian Lenny. It has an Intel 5100 wireless card. I'd like to get a driver for the card without having to install a new kernel.
View 11 Replies
View Related
Feb 20, 2010
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
View 2 Replies
View Related
Sep 16, 2010
I cant seam to find out how to get my card to work i cant find out how to install the driver or finding the wifi card on the system.
View 9 Replies
View Related
Jun 27, 2011
Im using natty in lenovo b460. After installation was not able to connect to wifi. Ethernet is working alright. So searched for additional drivers and installed the Broadcom 43xx drivers. After restart the network applet says the wireless is disabled by hardware switch, even after it is switched on/off several times.
Lenovo B460
kernel:2.6.38-8-generic 32-bit
Broadcom Corporation BCM4313 802.11b/g/n Wireless LAN Controller (rev 01)
ubuntu 11.04
[Code]...
View 1 Replies
View Related
Jun 15, 2011
i am using broadcom wireless (4312) on my laptop with FC15 and configured it using [URL]. initially it ran great without any problem (for a week). but from yesterday, every 15 minutes or so, my wifi started getting disconnected, showing the wireless login screen . I can reconnect only by rebooting or restarting network manager service.
View 6 Replies
View Related
Jun 19, 2011
i have a broadcom BCM4311 802.11b/g WLAN [14e4:4311] (rev 01) wireless adapter on a dell 1501 run by ubuntu 10.10.this particular model and revision is suppose to be absolutely supported by linux and indeed it did work perfectly before the user ran a upgrade from ubuntu 10.10 to 11.04.subsequently i have reinstalled 10.10. as i recall when i installed ubuntu 10.10 the first time i simply ran the System>Admin>Additional Driver installation tool to make the wireless work. i cannot recall if i ran the b43 or the sta driver but i have tried both this time and had no luck.
i am aware that the broadcom adapters are notoriously troublesome and i have tried the two workarounds here URL... as well as their third alternate workaround with no success.
View 3 Replies
View Related
Jun 16, 2011
I just installed 9.10 and I can't detect any wireless networks. Is the card compatible with 9.10? Do I need to install any drivers? If the card isn't compatible with 9.10 is it compatible with later versions of Ubuntu? Marking this as somewhat urgent as I need to get internet access for some coursework soon, and also because my parents will kill me if they find out I've done anything unusual with the laptop because it's new and they think anything non -MS is a virus.
View 9 Replies
View Related
Jun 27, 2009
I have had a search around, any cannot find any thing I can make sense of as to how I go about getting the above card to work with Fedora 11. Just done a fresh install (need Linux for some development) but have no wifi. My chipset is this Broadcom BCM4310. There seems to be a whole load of options, and I don't know which works and which don't:
kmod-wl
broadcom-wl
ndiswrapper
I can sit with an Ethernet cable to install/update as necessary, but really could do with wireless.
View 3 Replies
View Related
Sep 10, 2010
I am succesfully installed a Dell wireless card with Broadcom 4328 shipset using ndiswrapper and rpm sources on Fedora 12 2.6.32.14-127.fc12.i686.PAE. Now I am using original Win drivers but the wifi conection is very slow and unstable.
The wifi card runs perfectly on win 7.
This is the lspci -vvnn outpput
03:00.0 Network controller [0280]: Broadcom Corporation BCM4328 802.11a/b/g/n [14e4:4328] (rev 03)
Subsystem: Dell Wireless 1500 Draft 802.11n WLAN Mini-card [1028:000a]
Control: I/O- Mem+ BusMaster+ SpecCycle- MemWINV- VGASnoop- ParErr- Stepping- SERR- FastB2B- DisINTx-
[Code].....
View 7 Replies
View Related
May 13, 2010
I just installed ubuntu and I have no wifi connection. How would I download and intsall a copy from my Win XP boot?
View 2 Replies
View Related
Feb 23, 2010
Can't get my WiFi to work on my HP. My WiFi chip is bcm4303 (rev. 2) this is a new thread from http://ubuntuforums.org/showthread.php?t=1400427&page=4 ) So, I reinstalled Ubuntu (fresh install) Activated the Broadcom b43leagacy Wireless driver. When rebooting, the WiFi LED on the On/Off switch blinks.
[Code]...
View 9 Replies
View Related
Nov 7, 2010
I still try update my broadcom drivers, because when I try use airodump-ng i receive error.
This error:
Interface Chipset Driver
eth1 Unknown wl (monitor mode enabled)[code]....
I dont know why receive this error WARNING: modpost: missing MODULE_LICENSE() in /home/mobile/Desktop/wdriver/wl.o
see include/linux/module.h for more information
View 4 Replies
View Related
Dec 13, 2010
I installed Ubuntu 10.10 amd64 online today. I was using 10.04 32-bit before, and the network drivers were easy to find and install. Ubuntu did the job for me and they worked flawlessly. It was a relief I didn't need to search around.
Even though 10.10 (64bit) found the drivers for me, both ethernet and wireless, they do not seem to be working alright. I installed both, made a restart. I found that the WiFi light on my laptop stays on, even if the wireless network is turned off using either the key combination (Fn+F2), or manually turning it off.
Issues with the ethernet? I am right now using ethernet but it does not care to detect the connection. Empathy won't connect automatically as a result- says no network connection. But here I am, posting this. Evidently, there is a connection, right?
Issues with the wireless? The WiFi light stays on all the time, and it isn't able to get hang of the connection I have at home. It just won't show any wireless connections available. When I tried to connect by giving it the SSID and the encryption type and password, it didn't work. Just kept asking for the password again and again (I have checked with the router- the password is correct).
View 2 Replies
View Related
Dec 24, 2010
ok basically i have a new dell inspiron n5010 with a broadcom 4313 wifi card. it doesnt work with ubuntu studio 10.10. I have the drivers all installed and it works on ethernet with the broadcom STA proprietry driver. if i disable this driver the eth doesnt work. but the driver shows its working (screenshot-1).
There is no pop up or anything in the task bar for detected wifi. i open the network settings and it shows up with a wifi option but i have to go into properties and manually type in what i have "the_den_meribel". which didn't work. (screenshot-2).
i have tried the other driver broadcom-sta-common and that doesnt make it work either. screenshot-3. i did try to install the "lp-pphhy" or whatever it is (seacrh for firmware-b43 in synaptic).
i have a list of results from what i have typed into the terminal: dell inspiron n5010
Code:
sam@drytopubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Core Processor DRAM Controller (rev 18)
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
[Code]....
View 8 Replies
View Related
Jan 8, 2011
I just put 10.10 on my D830 and I love it except for a delay when I'm using the internet. When I click on a link while surfing the web it takes about 13 seconds before it responds. After that it works just fine.
My Windows 7 PC and my Macbook Pro don't do that so I'm guessing it has something to do with Ubuntu.
View 5 Replies
View Related
Jun 14, 2011
I just installed the 64-bit Kubuntu 11.04 and i've been having some issues getting the wifi to work. At first I went to additional drivers and activated the STA driver and restarted. After restarting when I went into the network manager and any option for wireless was disabled.
[Code]....
View 1 Replies
View Related
Jan 23, 2010
I just deleted my windows XP and installed Ubuntu 9.10 earlier this morning. I used wired connection to get drivers for my wireless network card.
When I did lspci, the very last line states:
Network Controller: Broadcom Coporation BCM4311 902.11b/g WLAN(rev 01)
I used the System -> Administration -> Hardware Driver and found 2 drivers. I have tried them both to connect to my D-Link Router. Neither of which worked.
For Broadcom B43 Driver, the wireless is able to detect wireless networks. However, it fails to establish connection.
For Broadcom STA Driver, the wireless cannot even detect wireless networks available.
What is the issue here and how do I resolve it so that I am able to connect onto the internet wirelessly?
View 9 Replies
View Related
Oct 16, 2010
After trying to make audio output work on Lenovo b560 notebook I finally succeeded but the wireless stopped working. The driver was removed. I tried to follow the instructions from Broadcom http://www.broadcom.com/docs/linux_sta/README.txt and it started showing the driver in admin - drivers, it shows that it is activated but not in use, but once I get to this point
"modprobe wl"
it shows this:
install /sbin/modprobe --ignore-install wl
insmod /lib/modules/2.6.32-25-generic-pae/updates/dkms/wl.ko
FATAL: Error inserting wl (/lib/modules/2.6.32-25-generic-pae/updates/dkms/wl.ko): Unknown symbol in module, or unknown parameter (see dmesg)
[Code]...
View 3 Replies
View Related
May 3, 2011
I've been seeing a lot of people checking for hardware and software blocks using the rfkill command. I can't seem to get it to do anything at all on my Broadcom "4321AG"/"4328" wireless using the Broadcom STA driver. Of course, I have an old-fashioned hardware switch on the front of my laptop.
Here is some information on my working wireless setup (that rfkill can't seem to see):
Quote:
lspci | grep work
03:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
*-network
description: Wireless interface
product: BCM4328 802.11a/b/g/n
[Code]....
When I try rfkill list all, it does nothing, just returns me to my BASH prompt. The wifi, wlan, bluetooth, and wwan identifiers also seem to do nothing with rfkill list. It looks to me like it "hooked" IRQ19 in the BIOS, and the wireless does work quite stably (although it does need several seconds to auto-reestablish wireless when Linux goes to "sleep," say overnight).
This page doesn't really tell me much more than rfkill did with no parameters:
[URL]
Is this just because I have an electromechanical wireless switch, or is it a 64-bit problem, or...
EDIT: Oh yes, sudo rfkill list all also just returns me to my BASH prompt without any whistles or bells (after entering a password)...
View 1 Replies
View Related
Oct 6, 2010
Is there a way to activate the Broadcom BCM4322 driver in Ubuntu on a MacBook Pro 5.1? The instructions that I found should work, but don't.I am currently running 2.6.32-24 but would like to install the driver to the 2.6.32-25-pae kernel (the standard kernel uses only 2.7 of 4GB RAM). According to wireless.kernel.org this Broadcom driver is not supported. Do I have to switch to Debian? The other day I installed vpnc, and it works but only over the wired connection. AirPort in Mac OS works, so there is nothing wrong with the hardware.
View 2 Replies
View Related
