Ubuntu Networking :: Intel 5100 WiFi Card - Dell Latitude E6400 - Suddenly WiFi LED On The Computer Stops Blinking
May 4, 2011
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
The funny thing is that it works fine in a Fedora installation, which has an older kernel and older drivers, on the same laptop. The fact that the indicator light doesn't come in when the physical switch is turned on suggests it's something to do with that switch.
I'm using a Vaio TT, which seems to use an Intel 5100 WiFi chipset, and a Linksys WRT54G2 (firmwares 1.0.1 and 1.0.4), ubuntus 10.10 and 10.04.
Wifi works fine out of the box. However if the other vaio tt in our office (running windows 7) comes online, my laptop stops being able to make new connections. It WILL stay connected to chat servers, and downloads SOMETIMES continue to work. However all new HTTP requests / ssh connections / rdp connections / pings fail. The laptop still appears to be "connected" to the wifi network.
This may also happen after an undetermined amount of time without the extra vaio. It is not solved by reconnecting or rebooting. Once the extra vaio leaves the building, everything works fine again. This problem does not happen at all if I boot into windows.
I have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07) 00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
I've recently bought a Dell Latitude E4310 off ebay. Wifi chipset is Intel(R) Centrino(R) Advanced-N 6200 AGN. I'm using Debian 8.2 with Gnome 3 and I've installed firmware-iwlwifi.
Wifi shows up in Gnome upper bar, it correctly scans the networks and seems to connect successfully to my home router but internet doesn't work, it doesn't seem able to load any page.
I recently installed Ubuntu 9.10 a a Dell D610 that is running a broadcom BMC943 internal wifi adapter. I've tried installing the wifi drivers off of Dell's website using the ndisgtk gui setup. It appears that whenever I setup the driver the OS can't apply it. It states that the wifi adapter is not on or installed. Here is what I get when I run iwconfig and lspci -n.
iwconfig: lo no wireless extensions. eth0 no wireless extensions. lspci -n: 00:00.0 0600: 8086:2590 (rev 03) 00:02.0 0300: 8086:2592 (rev 03)
[Code].....
I've also edited the blacklist.conf file as well with no luck. I've spent 2 days trying to figure this out with no luck at all.
I just did a fresh wipe and install of Ubuntu 11.04 on my Dell D630 Latitude. I installed connected to the internet and ubuntu recognized I was missing firmware and I installed and rebooted. Now the "firmware missing" notice is gone but I don't know how to connect to my wifi. I can access internet with the ethernet cable.
This is the lspci: 00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c) 00:02.0 VGA compatible controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 0c) 00:02.1 Display controller: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (secondary) (rev 0c)
[Code]....
I feel like I just need to add the wifi network, but I don't know what info to put into the fields.
I've got a Dell precision with Kubuntu 9.10. Wifi worked fine on that machine for months, but stopped working last week. I don't know what happened, but I recently did an "apt-get dist-upgrade". That might have something to do with it.
I've installed successfully the ubuntu 9.10 netbook remix on my DELL Latitude 430.Everything work out of the box except the wifi, I cannot find a way to get working.Using the lshw command, I can see that the interface is listed, but status is disabled.On the Network Manager, status I get is device not ready.As a FYI, bluetooth seems working perfect (I've not tried to pair with any device)as this is the only roadblock I face before enjoying Ubuntu on my laptop.
Have an odd problem on a Dell Latitude 13 w/ a Intel WiFi 5100 card. The wifi antenna is disabled on startup into Ubuntu 10.04/64-bit. There's no hardware enable/disable that I can find.I have tried "sudo ifconfig wlan0 up" to enable it, the light for the wifi antenna comes on, but still no luck.I know the wifi works in Ubuntu, because if i load windows first, then reset into Ubuntu, once in a while it works just fine.
EDIT 6 Dec: More detailed log from wpa_supplicant I'm using Ubuntu Studio 10.10 x64. I want to get wireless networking going manually. My wireless networking works successfully in Windows 7 x64. I can get it working successfully without encryption but when I try and use WPA-PSK, wpa_supplicant gets stuck in a loop between GROUP_HANDSHAKE and COMPLETED, as shown in the log below.
I've been working mostly off the instructions in this post: [URL]... My laptop is a Dell Studio 1537. It has an Intel Wifi 5100. I'm connecting to a F5D7633-4 router running F5D7633-4Av1_UK_1.00.010 firmware, which is the latest version of the firmware I can find. When I set up WPA, it uses encryption technique TPIK. The other generic information is
Code: $ iwconfig wlan0 up 04:00.0 Network controller: Intel Corporation WiFi Link 5100 $ lsusb Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 006 Device 002: ID 045e:074f Microsoft Corp. Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
i'd like to extend that ma intel wifi link 5100 is not detected no more after perform upgrade package( upgrade the kernel too ). when im using command 'lshw -C network' , there is appear to be detected, but not on command 'iwconfig' or even 'ifconfig' it just show nothin. also network-manager no longer show that ma wireless is work properly anymore.
the old kernel : 2.6.25-22 ( my wireless detected and usable ) the new kernel : 2.6.25-23 ( my wireless detected and unusable )
Intel wifi link 5100 not found on sony vaio backtrack 4 vmware I use vmware to load backtrack I have a sony vaio with 5100 AGN wifi card installed in it. I had tried anything to make my wifi work but always show no interface no wireless. I googled it for help for weeks and all i get was download the iwlwifi things and i already installed in it. i even tried many other thing
and everytime i type ifconfig it just show eth and lo and no wlan0 in it everytime i type airmon-ng there are no chipset interface and ...........thing (forgot) I could find my wireless card name when i type ilg... something i forgot The problem is,i think my linux doesn't reconize the card even i have installed the driver Anything that i can do to make my linux reconize wifi link 5100 agn wireless card?
I have backtrack 4 on vmware player.i have intel (R) wifi 5100 agn wireless card and when i type airmon-ng there is nothing shown on interface..and i have been told i need kernel rebuild..i have kernel 2.6.30.9 so how can rebuild it?
I have seen tons of threads on the internet about Ubuntu 10.04 having wireless issues but none of them have lead to me fixing the problem so I decided to come here. I have been able to connect to access points before but sometimes I have to reboot or reboot twice just to be able to see the wireless points and the enable wireless is always greyed out. And if I am connected to an AP or hardwire the connection drops frequently.
I have recently installed Ubuntu 9.10 in my Dell Latitude E6400. Everything works great except that I cannot disable the built in microphone. I have even disabled from the BIOS but the mic continues working, this is really annoying as I do lots of calling from this computer for my work.
I have played around with the alsamixer and the sound preferences but I haven't been able to disable it or at least lower its volume.
My headset is plugged in to the mic jack and it works fine. The problem is that both the headset and the internal mic are working at the same time.
I'm trying to get my Dell Latitude work with wifi speed >54Mbit/s, and up to now without any success. The router is a Dlink DIR-635, it has 'n' enabled and working (got an apple laptop connecting at 130Mbit/s, can't test the actual throughput though, since it's the only high-speed device).
Here's the device data:
0c:00.0 Network controller: Intel Corporation WiFi Link 5100 Subsystem: Intel Corporation WiFi Link 5100 AGN Flags: bus master, fast devsel, latency 0, IRQ 43 Memory at f1ffe000 (64-bit, non-prefetchable) [size=8K] Capabilities: [c8] Power Management version 3 Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
[Code]...
I'm running 11.4, added the compat-wireless recently to be able to run the newes firmware (iwlwifi-5000-5.ucode , firmware version 8.83.5.1 build 33692), but still all I get is 54Mbit/s. I'd like to know if ANYONE ever got the 802.11n speed on linux, and in particular with these intel cards.
I have an Acer Aspire 6930 laptop that I'm setting up for my wife with Debian Lenny. It has an Intel 5100 wireless card. I'd like to get a driver for the card without having to install a new kernel.
I just did a dual boot with OpenSuSE 11.2 and Windows 7. They both work perfect but for some reason the wireless (intel wifi 5100 AGN) and my wired network card (Atheros AR8131 Gigabyte controller)do not work in opensuse. Now the problem is that I do not have a clue about linux and therefore I don't know how to fix the problem. I searched the forum and I tried these commands "sudo /sbin/ifdown eth0" and "sudo /sbin/ifup wlan0" and both says something like device not connected/present (can't remeber exactly).
I have installed several flavors of Linux on this box Ubuntu, Mint and a few others so I figured I would try the most challenging disto Slackware 13.37... I had not trouble getting through the install but when the system boots it just shuts down at some point during the boot process.
I moved to Berlin recently and I got wireless internet through an access point. I'm supposed to use the laptop's built-in wireless netcard to access the internet. This usually works in windows (connection falls out from time to time), but I have yet to make it work in linux. I'm using OpenSuse 11.3 64-bit and the Knetwork manager. Most of the settings in the network manager are correct, but it keeps wanting to use system certificates for the server. By that I mean it keeps checking 'Use CA System certificates'.
So I can't choose the CA-certificate supplied by my internet provider. I keep removing the check-mark and pointing it to the 'hotzoneCA.der' certificate. I also got a 'personal' certificate, in lack of a better word. Its called 'jacob_collstrup.p12'. The Knetwork manager seems to accept the 'jacob_collstrup.p12' certificate, but not the other one.
I just put the certificates in a folder like this /jacob/home/hotzone/zertifikate/ I can see the network fine using the Knetwork manager, and the signal strength seems ok. Not too good, but it shouldn't be a problem. I might have messed up the system, since I first tried this guide, prior to experimenting with Knetwork Manager:
1. (had to run this one as su) Code: wpa_supplicant -w -i wlan0 -c /etc/wpa_supplicant.conf -Dndiswrapper -dd �t 2. (This was supposed to be put in a wpa_supplicant.conf file) Code: ctrl_interface=/var/run/wpa_supplicant ctrl_interface_group=0 opensc_engine_path=/usr/lib/opensc/engine_opensc.so pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
I was uninstalling some programs through the package manager, then restarted. When my netbook turned back on, I had no internet connection and the WiFi icon wasn't showing in the notification area as it usually does either. Says the card is functioning properly and everything. Other devices can connect to the WiFi.I'm kind of new to Ubuntu and searched around a bit, but am at a loss. HP Mini 110Ubuntu 10.10Broadcom BCM4313Edit: Quote:$ sudo ifconfig -s
Installed ubuntu 9.10 dual boot with win7 yesterday. Everything working but Wifi. Wifi works fine with Win7. No Wifi in Ubuntu. Very confused. I have info from the wifi trouble ticket post.There does not seem to be a driver for this card anywhere.
lawrence@lawrence-laptop:~$ lspci 00:00.0 Host bridge: Intel Corporation X58 I/O Hub to ESI Port (rev 13) 00:01.0 PCI bridge: Intel Corporation 5520/5500/X58 I/O Hub PCI Express Root Port 1 (rev 13)
I have an old Toshiba Satellite A30 Notepad. I've installed Ubuntu 10.04 onto it and everything but WiFi works. I've installed wicd and several other network tools but just can't get Ubuntu to let me use the WiFi connection (the option is greyed out).I know the card works because the last OS (Windows XP) used it without any problems. The card is detected, the drivers are installed and the hardware (slider) switch is set to on.I think the issue is related to the Radio Frequency Kill Switch being on but I don't know how to turn it off.The output from various commands are:
I own a Dell Mini 10v netbook, I love the little thing, except I hate the Broadcom wireless card, I would much rather have a card that can use open source drivers. I have been searching on Google, looking on forums and looking on the hardware sites, but I cannot find a replacement card.
The problem is the tiny Dell has a tiny place to put the card and according to Dell and Broadcom, it is a "halfcard", which I have no idea what that is.
I'm dual booting windows 7 64 bit and Ubuntu 10.1 64 bit on my Dell Inspiron 11z with an embedded WiMAX/WiFi Link 6050 series wireless card made from Intel. I only use it for wifi, not 3g or wimax. I installed the latest driver from intellinuxwireless.org, iwlwifi-6050-ucode-41.28.5.1, but it still doesn't seem to work. I ran these terminal commands from another thread:
cd Desktop/wlwifi-6050-ucode-9.201.4.1 sudo cp iwlwifi-6050-4.ucode /lib/firmware sudo chmod 644 /lib/firmware/iwlwifi*
[code]....
After running "sudo rmmod -f iwlagn sudo modprobe iwlagn", I get this read out for my wireless card.
*-network DISABLED description: Wireless interface product: WiMAX/WiFi Link 6050 Series vendor: Intel Corporation
[code]....
In the ubuntu help section it tells me to flip a manual wifi switch to enable it, but pressing my windows wifi button, F2, doesn't appear to do anything while in ubuntu. The only experience I have working with linux is typing some terminal commands on my android phone to root it.
get WIFI working on my Dell D600 with Ubuntu 11.04 freshly installed. I some limited sucched following the this post t=1621331 this got the card working but it was very very slow over 70% packet loss to the WIFIrouter. 1. Machine details Dell Latitude D6002 Wireless Broadband and Chip setlspci -nn | grep Broadcom - 02:03.0 Network controller [0280]: Broadcom Corporation BCM4309 802.11a/b/g [14e4:4324] (rev 02)3. Check interfaces
eth0 Link encap:Ethernet HWaddr 00:0b:db:e0:1c:5b UP BROADCAST MULTICAST MTU:1500 Metric:1 RX packets:0 errors:0 dropped:0 overruns:0 frame:0
