I have an Acer Aspire 6930 laptop that I'm setting up for my wife with Debian Lenny. It has an Intel 5100 wireless card. I'd like to get a driver for the card without having to install a new kernel.
View 11 RepliesI have only had a few weeks worth of experience with linux, so I'm probably considered a newbie at this but I felt like giving it a shot. I just configured my new Toshiba Satellite A505-S6969 to jaunty. Most of the transition is going well but I'm stuck with a few issues, one of which is getting my wifi to work. Right now I'm working off of an ethernet cable.spci returns
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port
[code]...
I am running (K)Ubuntu Lucid 10.04 64bit on a Dell Latitude E6400, WiFi Card Intel 5100. Never had any problems with networking. Up to about 2 weeks ago. I do realize there have been quite a few posts with this network adaptor, but non really described the problem I have here.
What happens is that suddenly the WiFi LED on the computer stops blinking, the WiFi connection gets disrupted, and the device is not recognized anymore when checking ifconfig. Only cold restarting the machine helps then... it will work for a while (between 1 and 20 minutes) and then crash again.
On Windows 7 the card works perfectly fine. With Ubuntu 11.04 in Live CD mode I have the same effects (connection crashes after a while). Also tried booting an older kernel, no success.
My exact hardware:
Code:
I notived the following problems in /var/log/kern.log
Code:
I have backtrack 4 on vmware player.i have intel (R) wifi 5100 agn wireless card and when i type airmon-ng there is nothing shown on interface..and i have been told i need kernel rebuild..i have kernel 2.6.30.9 so how can rebuild it?
View 10 Replies View RelatedI'm trying to get my Dell Latitude work with wifi speed >54Mbit/s, and up to now without any success. The router is a Dlink DIR-635, it has 'n' enabled and working (got an apple laptop connecting at 130Mbit/s, can't test the actual throughput though, since it's the only high-speed device).
Here's the device data:
0c:00.0 Network controller: Intel Corporation WiFi Link 5100
Subsystem: Intel Corporation WiFi Link 5100 AGN
Flags: bus master, fast devsel, latency 0, IRQ 43
Memory at f1ffe000 (64-bit, non-prefetchable) [size=8K]
Capabilities: [c8] Power Management version 3
Capabilities: [d0] MSI: Enable+ Count=1/1 Maskable- 64bit+
[Code]...
I'm running 11.4, added the compat-wireless recently to be able to run the newes firmware (iwlwifi-5000-5.ucode , firmware version 8.83.5.1 build 33692), but still all I get is 54Mbit/s. I'd like to know if ANYONE ever got the 802.11n speed on linux, and in particular with these intel cards.
I have seen tons of threads on the internet about Ubuntu 10.04 having wireless issues but none of them have lead to me fixing the problem so I decided to come here. I have been able to connect to access points before but sometimes I have to reboot or reboot twice just to be able to see the wireless points and the enable wireless is always greyed out. And if I am connected to an AP or hardwire the connection drops frequently.
View 1 Replies View RelatedI just did a dual boot with OpenSuSE 11.2 and Windows 7. They both work perfect but for some reason the wireless (intel wifi 5100 AGN) and my wired network card (Atheros AR8131 Gigabyte controller)do not work in opensuse. Now the problem is that I do not have a clue about linux and therefore I don't know how to fix the problem. I searched the forum and I tried these commands "sudo /sbin/ifdown eth0" and "sudo /sbin/ifup wlan0" and both says something like device not connected/present (can't remeber exactly).
View 9 Replies View Relatedmy platform Centos 5.3
i did the following
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
[Code]....
I moved to Berlin recently and I got wireless internet through an access point. I'm supposed to use the laptop's built-in wireless netcard to access the internet. This usually works in windows (connection falls out from time to time), but I have yet to make it work in linux. I'm using OpenSuse 11.3 64-bit and the Knetwork manager. Most of the settings in the network manager are correct, but it keeps wanting to use system certificates for the server. By that I mean it keeps checking 'Use CA System certificates'.
So I can't choose the CA-certificate supplied by my internet provider. I keep removing the check-mark and pointing it to the 'hotzoneCA.der' certificate. I also got a 'personal' certificate, in lack of a better word. Its called 'jacob_collstrup.p12'. The Knetwork manager seems to accept the 'jacob_collstrup.p12' certificate, but not the other one.
I just put the certificates in a folder like this /jacob/home/hotzone/zertifikate/ I can see the network fine using the Knetwork manager, and the signal strength seems ok. Not too good, but it shouldn't be a problem. I might have messed up the system, since I first tried this guide, prior to experimenting with Knetwork Manager:
1. (had to run this one as su)
Code:
wpa_supplicant -w -i wlan0 -c /etc/wpa_supplicant.conf -Dndiswrapper -dd �t
2. (This was supposed to be put in a wpa_supplicant.conf file)
Code:
ctrl_interface=/var/run/wpa_supplicant
ctrl_interface_group=0
opensc_engine_path=/usr/lib/opensc/engine_opensc.so
pkcs11_engine_path=/usr/lib/opensc/engine_pkcs11.so
pkcs11_module_path=/usr/lib/pkcs11/opensc-pkcs11.so
[Code]...
I've got a Dell precision with Kubuntu 9.10. Wifi worked fine on that machine for months, but stopped working last week. I don't know what happened, but I recently did an "apt-get dist-upgrade". That might have something to do with it.
When I boot in Windows, wifi works fine.
Code:
tijl@Smaug:~$ sudo lshw -C network
*-network
description: Ethernet interface
product: 82567LM Gigabit Network Connection
[Code]....
I have a Dell Latitude E6500 running Opensuse 11.3. As far as I can tell the module for my wireless card is loaded correctly and it's working:
Code:
sudo lspci | grep -i wifi
0c:00.0 Network controller: Intel Corporation WiFi Link 5100
Code:
[ 556.642557] iwlagn: Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 556.642560] iwlagn: Copyright(c) 2003-2010 Intel Corporation
[Code].....
The funny thing is that it works fine in a Fedora installation, which has an older kernel and older drivers, on the same laptop. The fact that the indicator light doesn't come in when the physical switch is turned on suggests it's something to do with that switch.
I'm using a Vaio TT, which seems to use an Intel 5100 WiFi chipset, and a Linksys WRT54G2 (firmwares 1.0.1 and 1.0.4), ubuntus 10.10 and 10.04.
Wifi works fine out of the box. However if the other vaio tt in our office (running windows 7) comes online, my laptop stops being able to make new connections. It WILL stay connected to chat servers, and downloads SOMETIMES continue to work. However all new HTTP requests / ssh connections / rdp connections / pings fail. The laptop still appears to be "connected" to the wifi network.
This may also happen after an undetermined amount of time without the extra vaio. It is not solved by reconnecting or rebooting. Once the extra vaio leaves the building, everything works fine again. This problem does not happen at all if I boot into windows.
EDIT 6 Dec: More detailed log from wpa_supplicant I'm using Ubuntu Studio 10.10 x64. I want to get wireless networking going manually. My wireless networking works successfully in Windows 7 x64. I can get it working successfully without encryption but when I try and use WPA-PSK, wpa_supplicant gets stuck in a loop between GROUP_HANDSHAKE and COMPLETED, as shown in the log below.
I've been working mostly off the instructions in this post: [URL]... My laptop is a Dell Studio 1537. It has an Intel Wifi 5100. I'm connecting to a F5D7633-4 router running F5D7633-4Av1_UK_1.00.010 firmware, which is the latest version of the firmware I can find. When I set up WPA, it uses encryption technique TPIK. The other generic information is
Code:
$ iwconfig wlan0 up
04:00.0 Network controller: Intel Corporation WiFi Link 5100
$ lsusb
Bus 008 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 007 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 006 Device 002: ID 045e:074f Microsoft Corp.
Bus 006 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
Bus 005 Device 001: ID 1d6b:0001 Linux Foundation 1.1 root hub
[Code]...
i'd like to extend that ma intel wifi link 5100 is not detected no more after perform upgrade package( upgrade the kernel too ). when im using command 'lshw -C network' , there is appear to be detected, but not on command 'iwconfig' or even 'ifconfig' it just show nothin. also network-manager no longer show that ma wireless is work properly anymore.
the old kernel : 2.6.25-22 ( my wireless detected and usable )
the new kernel : 2.6.25-23 ( my wireless detected and unusable )
Intel wifi link 5100 not found on sony vaio backtrack 4 vmware I use vmware to load backtrack I have a sony vaio with 5100 AGN wifi card installed in it. I had tried anything to make my wifi work but always show no interface no wireless. I googled it for help for weeks and all i get was download the iwlwifi things and i already installed in it. i even tried many other thing
/etc/init.d/wicd start
/etc/init.d/networking start
and everytime i type ifconfig it just show eth and lo and no wlan0 in it everytime i type airmon-ng there are no chipset interface and ...........thing (forgot) I could find my wireless card name when i type ilg... something i forgot The problem is,i think my linux doesn't reconize the card even i have installed the driver Anything that i can do to make my linux reconize wifi link 5100 agn wireless card?
I have recently installed the intel-wireless-tools and now my laptop detects my wireless router and connects to it but when I go into a browser I can access the internet. If I connect to the wired network no problems(same router) no go on Wireless.
View 11 Replies View RelatedI've installed firmware-iwlwifi I've modprobe -r'd and modprobed the iwlagn module I CAN scan, using iwlist wlan0 scanning, and I can see my essid, hovering in the distance. it is definitely broadcasting.
I use wicd and wicd-curses. No wireless show up in wicd-curses. ifup wlan0 gives me no dhcp offers received and slumbers again. from iwconfig:
wlan0 IEEE 802.11abgn ESSID:off/any
Mode:Managed Access Point: Not-Associated Tx-Power=15 dBm
Retry long limit:7 RTS thr:off Fragment thr:off
Encryption key:off
Power Management:off
from lspci:
03:00.0 Network controller: Intel Corporation WiFi Link 5100
I have a HP Pavilion dv6-2155dx Entertainment Notebook with Broadcom Wireless Lan Driver.
I didn't want to bother anyone with this, but I just could't find a solution. I was happy using Ubuntu 10.04 LTS Desktop Edition, because the wifi was working fine, but I messed everything up dealing with networking in terminal.
So formated and now I have Ubuntu 10.10 Netbook Edition, but that didn't solved my problem at all, because my wifi driver still unfunctional.
Before anything, I tried commands like "dbus restart" and "network restart".
So after reading that I can install by getting ndisgtk and the .inf file, I downloaded the right driver from HP Support's page of my notebook. Extracted the package with Wine (got some error because I wasn't running Win7, of course, but that doesn't matter.).
I did this: [url]
And this is my final result:[url]
Technical informations:
Quote:
I've been trying to install the linux driver for my wireless car which is an 'Intel wifi link 4965'. I've followed the literature that Intel provide but I keep running into errors.
(I downloaded the driver from[intellinuxwireless.org/?n=downloads)
I could't find the 64bit Debian Lenny OS for Intel architecture.Hence I have installed amd64 and it is working fine.Does both intel and amd have the same 64 bit OS amd64 ?
View 3 Replies View Relatedi was going to do this project of installing Debian on a NAS Intel SS4000e . The part i got stuck is that i cannot stop the Redboot from booting up. i.e using CTRL+C. The NAS uses the latest firmware from Intel Ver1.4 . The serial cable is tested and i used the following pin out [URL]... nsoleCable and the comport settings are as follows
View 1 Replies View RelatedI have several computers based on ECS G41T-M motherboard, featuring ICH7 chipset with VIA VT1708B 8-ch audio codec. I've installed Debian Lenny 64-bit on it. The sound itself works, but mixer does not, thus, for example, I can not get my recording app working, changing volumes does not work etc.
View 2 Replies View Relatedhow to set up wireless networks. The technical language is foreign to me. My notebook maybe described as follows:
Make and Model: SONY VAIO FW490
Processor: Intel� Core™ 2 Duo Processor P8700 (2.53GHz)
RAM: 4GB DDR2-SDRAM
Graphics card: ATI Mobility Radeon™ HD4650 graphics card with 512MB vRAM.
[code]....
It came pre-installed with Windows Vista Home Premium but now I have Fedora 11 (w/ Gnome) as the only OS. The router that I am using with an Ethernet cable connected to my laptop is a Netgear 54Mbps Wireless Router WGR614 v7 connected to a Motorola Surfboard Cable Modem. Both worked right out of the box and now I have wired Internet access. RCN is my ISP. I would like to avoid using the Ethernet cable connecting my laptop to the router.
This is what I have done so far:
1. Gone to System>Administration>Network
2. Clicked "New" then chose "Wireless connection" from the list
3. Chose Intel Corp. Wireless WiFi Link 5100 (wlan0) from list. The other option was "Other Wireless Card".
I don't know what to do after this. What should I choose in the windows entitled "Configure Wireless Connection" and "Configure Network Settings" ? I chose Ad-Hoc for mode and entered an SSID name even though I have no explanation for taking these actions. As for the other settings, I simply went with whatever was already selected. At the moment, I lose Internet access when I disconnect the Ethernet cable. I see other wireless networks when I click the network icon on the top right corner of the screen. I don't know how to make my router appear on that list if that's necessary.
In simple, I have tried everything I can find on this issue, but I am still unable to get it working on my HP DV4 laptop. My laptop has a Intel 5100 wireless card, and it always says that wireless is disabled. Ive tried booting with the wireless switch off, with it on, ive reinstalled the driver and did everything in a post I found here (cant find a link) that basicly had me reinstall the driver from intels site, then reload the network manager, to no prevail. Im running ubuntu 10.4.1 (just installed), and this is really a big issue 4 me.
View 1 Replies View RelatedRecently got a Zareason Teo netbook. Wireless came disabled (huh?).
Using Ubuntu 10.4
Wireless: Intel Wireless WiFi Link 5100
iwconfig
lo no wireless extensions.
[Code]....
i am looking for any advice what tool to use for temperature monitoring on server dual xeon F29 board intel se7501wv2 running CentOS 5.5
View 4 Replies View Relatedi just installed debian on one of my cvomputers that is more than 20 away from the wirless router router in the house and i can't get it to connect to thew internet via wifi i did this i went into system>administration>network and i sawmy wirless card and enabled it (a progress prompt came up for about 5 minutes) then i clicked properties and entered all of the information about my wirless router (i thought it would've scanned the area for any wirless ap) then i clicked okay and no dice, i went into the web browser and i get an error. what did i do wrong? how do i make it connect to the internet via wirless i have 2 wireless cards connected to this computer (sometimes linux doesn't kije the internal one so i connect the usb wirless card that i got)
View 14 Replies View Relatedbefore i had a wifi work.I have do apt-get upgrade and now i don't have wifi.I try to install one more time driver sound = no difference.
View 3 Replies View RelatedI have Dell 1537 laptop having Intel 5100 wireless card. It is not supported by Fedora 9. I have tried downloading the driver iwlwifi-5000-ucode-8.24.2.12.tgz from URL...Downloads and copied it to folder /lib/firmware and rebooted the machine. But still it is not detected by the system. Is there any solution to this problem .
View 2 Replies View RelatedI have just switch to Ubuntu on my laptop from Windows 7 and I am experiencing alot of wireless dropping.
The signal itself is full and I am very close to the router.
What could be the issue and how do I go about rectifying it.
Laptop: Dell 13z.
Wireless: Intel 5100 agn
Ubuntu 10.10 x64.