Ubuntu Networking :: Neither Broadcom B43 Nor STA Driver Is Working?
Jan 23, 2010
I just deleted my windows XP and installed Ubuntu 9.10 earlier this morning. I used wired connection to get drivers for my wireless network card.
When I did lspci, the very last line states:
Network Controller: Broadcom Coporation BCM4311 902.11b/g WLAN(rev 01)
I used the System -> Administration -> Hardware Driver and found 2 drivers. I have tried them both to connect to my D-Link Router. Neither of which worked.
For Broadcom B43 Driver, the wireless is able to detect wireless networks. However, it fails to establish connection.
For Broadcom STA Driver, the wireless cannot even detect wireless networks available.
What is the issue here and how do I resolve it so that I am able to connect onto the internet wirelessly?
View 9 Replies
ADVERTISEMENT
Jul 12, 2010
When I freshly installed my Ubuntu 10.04, broadcom wireless worked after I installed the driver using hardware manager. But somehow it got de-activated, and not its not working. I need help related to that. Here is some output which might help you to understand the problem.
Code:
paras@ubuntu:~$ sudo lshw -C network
[sudo] password for paras:
*-network DISABLED
description: Wireless interface
[code].....
View 7 Replies
View Related
Oct 2, 2010
I applied the latest updates today and when I rebooted, My wireless broadcom driver is not working and the ifconfig does not list it either anymore, was working 8 min ago but is now dead. If I turn off the wireless with a switch and back on, I get a blue light but it remains disabled and greyed out on the network icon. Ubuntu 10.04, latest updates applied daily. I removed the driver and reinstalled it, it did not help at all. Also, my Truecryt gdecrypt stopped working.
Update: it seems the wireless switch on the front of the laptop is now working backwards, in checking the daemon log I found Turning off the wifi so the light goes out:
Oct 2 20:09:18 chuck-laptop NetworkManager: <info> WiFi now enabled by radio killswitch
Oct 2 20:09:18 chuck-laptop NetworkManager: <info> (eth1): bringing up device.
Oct 2 20:09:18 chuck-laptop NetworkManager: <info> (eth1): supplicant interface state: starting -> ready
[code]...
Update, I found that if I boot the laptop up with the networking switch off, then, after I'm booted up, turn it on, it works. However if I reboot the laptop with the network switch in the on position I get the above issue with the switch being inverted and not working properly.
View 2 Replies
View Related
May 28, 2011
I patched my wireless driver in order to support packet injection. Using this tutorial:
- Install the Firmware:
Code:
- Create new directory:
Code:
- Now disconnect Internet and unload all your driver (use rmmod command)
- Move/copy the Compat-Wireless patched in /usr/src/drivers directory and unpack the drivers:
Code:
Blacklist the wl driver: (STA driver)
Code:
Currently I'm running Ubuntu 10.10, Kernel 2.5.35-29-generic. I have a Broadcom 4318 for my WLAN and a Broadcom 4401-B0 for my ethernet. I followed the tutorial and I managed to get packet injection working on my WLAN; however, my ethernet connection isn't working. I tried sudo modeprobe b44, but I get the following message:
FATAL: Error inserting b44 (/lib/modules/2.6.35-29-generic/kernel/drivers/net/b44.ko): Invalid argument
View 9 Replies
View Related
Jan 24, 2011
I just bought a Lenovo B560, everything working except the Broadcom 4727 wireless (only in terminal it works)
View 4 Replies
View Related
Feb 20, 2010
I have Centos5.4 loaded on a late 2008 MACBOOK Pro and would like to get wireless working. I've attempted to download the broadcom driver and create a driver module with no luck.
Using these instructions....
[url]
When I make the WLAN driver, I get this:
View 2 Replies
View Related
Jan 12, 2010
I just got my new ubuntu 9.10 os desktop version installed into my lenovo laptop but then my WiFi is not working. Previously I had a broadcom driver which currently is not functioning with the ubuntu 9.10.
View 2 Replies
View Related
Aug 31, 2010
I have bought a new Dell Studio XPS Desktop with Broadcom BCM57788 network card. The installation of the tg3 driver from Dell was done according to Documentation
But still, the network card is not there. When I call ifconfig, there is only "lo" and no "eth". In Yast it says that the Netlink BCM57788 card cannot be configured because the firmware is missing. I also already did modprobe tg3 and rmmod tg3.
BTW, I have installed OpenSuse 11.2 x32 which is Linux 2.6.31.5.
View 6 Replies
View Related
Sep 15, 2011
Broadcom wifi driver working only with Kernel-default, any way to get it work with desktop-kernel 3.1rc/3.0?
View 6 Replies
View Related
Jul 16, 2010
Im having problems making my wireless card "Broadcom 4312" work on centos 5.4 X64 , i have installed and built the driver from their official site and inserted its module successfully, but whenever i try to avtivate the interface "called eth1" i get the following
Error for wireless request "Set Encode" (8B2A) :
SET failed on device eth1 ; Invalid argument.
Error for wireless request "Set Encode" (8B2A) :
SET failed on device eth1 ; Invalid argument.
View 2 Replies
View Related
Oct 16, 2010
After trying to make audio output work on Lenovo b560 notebook I finally succeeded but the wireless stopped working. The driver was removed. I tried to follow the instructions from Broadcom http://www.broadcom.com/docs/linux_sta/README.txt and it started showing the driver in admin - drivers, it shows that it is activated but not in use, but once I get to this point
"modprobe wl"
it shows this:
install /sbin/modprobe --ignore-install wl
insmod /lib/modules/2.6.32-25-generic-pae/updates/dkms/wl.ko
FATAL: Error inserting wl (/lib/modules/2.6.32-25-generic-pae/updates/dkms/wl.ko): Unknown symbol in module, or unknown parameter (see dmesg)
[Code]...
View 3 Replies
View Related
May 3, 2011
I've been seeing a lot of people checking for hardware and software blocks using the rfkill command. I can't seem to get it to do anything at all on my Broadcom "4321AG"/"4328" wireless using the Broadcom STA driver. Of course, I have an old-fashioned hardware switch on the front of my laptop.
Here is some information on my working wireless setup (that rfkill can't seem to see):
Quote:
lspci | grep work
03:00.0 Network controller: Broadcom Corporation BCM4328 802.11a/b/g/n (rev 03)
*-network
description: Wireless interface
product: BCM4328 802.11a/b/g/n
[Code]....
When I try rfkill list all, it does nothing, just returns me to my BASH prompt. The wifi, wlan, bluetooth, and wwan identifiers also seem to do nothing with rfkill list. It looks to me like it "hooked" IRQ19 in the BIOS, and the wireless does work quite stably (although it does need several seconds to auto-reestablish wireless when Linux goes to "sleep," say overnight).
This page doesn't really tell me much more than rfkill did with no parameters:
[URL]
Is this just because I have an electromechanical wireless switch, or is it a 64-bit problem, or...
EDIT: Oh yes, sudo rfkill list all also just returns me to my BASH prompt without any whistles or bells (after entering a password)...
View 1 Replies
View Related
Oct 6, 2010
Is there a way to activate the Broadcom BCM4322 driver in Ubuntu on a MacBook Pro 5.1? The instructions that I found should work, but don't.I am currently running 2.6.32-24 but would like to install the driver to the 2.6.32-25-pae kernel (the standard kernel uses only 2.7 of 4GB RAM). According to wireless.kernel.org this Broadcom driver is not supported. Do I have to switch to Debian? The other day I installed vpnc, and it works but only over the wired connection. AirPort in Mac OS works, so there is nothing wrong with the hardware.
View 2 Replies
View Related
Nov 28, 2010
I just recently recieved a Mini CQ10-525DX with a Broadcom 4313 wlan card. when loading ubuntu i notice it says that it supports 4311 4312, so i looked on the broadcom website and they have a newer update with 4313 coverage. I downloaded it but do not know how to install it.
View 9 Replies
View Related
Jan 15, 2011
I cant get the STA driver activated. I keep getting the error:
Code:
SystemError: installArchives() failed
Synaptic can't mount my install CD, maybe that has to do something with the problem.
[code]....
View 1 Replies
View Related
Apr 29, 2011
In Ubuntu 11.04 32-bit
Dell Studio 1558
Everytime I want to active it I got the following: installation of this driver failed. have a look at the log file for details: /var/log/jockey.log I don't know if this is related to Software Sources, I only have Canonical Partners and Independent. I installed Ubuntu 11.04 from an ISO file and used the whole disk
View 3 Replies
View Related
Jul 29, 2011
i have windows vista with a broadcom 802.11g network adapter.I dont know much about computers but i would like to know how to install it on the ubunto OS so i can use internet ?
View 2 Replies
View Related
Jul 16, 2009
My F11 x86_64 machine has regularly been crashing at boot up. I removed broadcom-wl and installed ndiswrapper, now the crashes seem to have gone.
I wonder if anyone else has noticed issues, I have this Broadcom wireless model:
0c:00.0 Network controller: Broadcom Corporation BCM4312 802.11b/g (rev 01)
View 3 Replies
View Related
Jan 14, 2010
Installed 9.10 side-by-side with Vista, then installed the Broadcom STA wireless driver, rebooted to activate it no luck, no connection, neither wireless nor wired. Did this several times. Getting online in Vista works fine.
Here's the system I'm using:
HP tx2500z laptop
Vista Home Premium SP1
AMD Turion X2 Dual-Core Mobile processor RM
ATI Radeon HD 3200 graphics card
Broadcom 4322AG 802.11a/b/g/draft-n WiFi adapter
Realtek RTL 8186C (P) Family PCI-E Gigabit Ethernet NIC (NDIS 6.0)
View 4 Replies
View Related
Feb 4, 2010
I am using Linux Mint 8 Helena x64 Edition on Dell Studio 15 laptop which has Dell 1520 Wireless-N Mini Card. It does work when I boot from Live CD of Helena, connect to a wired network and download & install the proprietary drivers when prompted. But on the installed system, I am unable to activate the Broadcom STA driver. I tried completely removing and then reinstalling bcmwl-kernel-source and dkms packages from package manager.When I go to Administration -> Hardware Drivers and click on Activate for Broadcom driver, at first there used to be a window which said Downloading and it used to go away after few seconds and nothing used to happen. Then I installed few updates. At the time of writing, I have installed all the available updates. Now after clicking on Activate, I get this error :
Code:
Sorry, installation of this driver failed.
Please have a look at the log file for detains: /var/log/jockey.log
[code]....
View 9 Replies
View Related
Jul 4, 2010
The Hardware Driversscreen shows that it needs the driver for it and when I click "activate" it tries to download it. This doesn't work because neither my ethernet nor wireless cards work.
View 4 Replies
View Related
Aug 14, 2010
I'm using a Dell Vostro 1000, and i just installed lucid. However, whenever i try to install either the broadcom STA or B43 drivers, i get this message
SystemError: Failed to lock /var/cache/apt/archives/lock
View 1 Replies
View Related
Sep 26, 2010
We have a Lynksys wmp300n networking card and wants it to work with her new 64-bit system (Ubuntu 9.10). One of the files needed to use it in ndiswrapper was not on her CD and isn't available from their web site. After a few days, I found a Compaq driver .exe that contains the file and thought I was home free. The problem now is that I can't make the broadcom driver the system defaulted to to stop being used. My steps were:
sudo apt-get install network-manager
sudo ndiswrapper -i ~/Desktop/bcmwl5.inf
***//got a -> couldn't find "BCMWL564.SYS"
sudo ndiswrapper -r bcml5
***//got the sys file from a divers for a Compaq card I found a link to
sudo ndiswrapper -l
***//got nothing back
sudo ndiswrapper -i ~/Desktop/bcmwl5.inf
sudo ndiswrapper -l
[Code]....
* Now at this point I don't understand why the b43-pci-bridge driver is still being used nor what to do about it. Edit-> Not sure why it added asterisks in place of my false spaces that I used for indentation, but I can't seem to make it stop replacing them (or stop deleting normal spaces or ignoring and not rendering tabs).
View 1 Replies
View Related
Mar 9, 2011
I have an emachines D620 laptop running Ubuntu 10.10 with a Broadcom Corporation BCM4312 802.11b/g LP-PHY (rev 01). I havent done anything with it and cant seem to get it to work. I know this because when I had visto on it the card worked, but know it says that its firmware is not enabled and ive tried installing the drivers using the Additional Drivers under Administration. I would like it to be working so I can use my laptop's internet.
View 5 Replies
View Related
May 25, 2011
I'm having problems installing the drivers after doing an install using WUBI.I no longer have the installation disc for 10.10 as I had to reformat my HD after having problems with my Win7 and Ubuntu installation (on separate partitions), so I did this set up so they can co-exist better on the single HD. It's a bit of a long story, so that's the short version.My particular problem is that I am unable to install the drivers needed because I had let WUBI download the disc and after installation I couldn't locate it on my HD. It must have been removed right after installation. I have a copy of the contents on a bootable USB, but I don't know how to point the system/repository to it. So I'm sure I have the all the required materials to make this happen. I just don't know how.
I've located the driver in the media/usb/pool/restricted/ folder, but synaptic/software installer insists on downloading the dependencies even if I don't have internet. I checked the CDROM option of in the repositories panel, but it can't locate the disc.Can anyone tell me which dependency files are needed and the command to install them, if need be. I'm so sorry. I am still very new to linux, but I am quite satisfied about using it as my working environment.
View 1 Replies
View Related
Jul 1, 2011
sent the following email to Broadcom [URL]. I'll post an update if I receive a response. The current Linux STA 802.11 driver causes my system to crash.I've verified this under Ubuntu 11.04 and Linux Mint 11(an ubuntu derivative). Oddly enough, everything worked find under Ubuntu 10.10. My chipset is the 4321, my CPU is an AMD Phenom II 920, and the motherboard is an ASUS M3A78-EM. I tried the STA driver that ships with Ubuntu as well as compiling the one at [URL], including the patch for kernel versions > 2.6.37.
I am confident that the linux driver is the problem. If I connect my machine to my router using an ethernet cable, everything works fine. Also, the wifi adapter works fine under Windows. The symptoms are that the wifi adapter appears to connect to my network correctly and works fine for short transfers. But when I try a larger transfer, such as a speed test or streaming an mp3, one of three things happens after about 5 to 10 seconds:
1) The screen remains in graphics mode but locks up, including the mouse pointer. No keyboard input has any effect.
2) The screen goes into text mode and repeats the following over and over: [435.610002] ehci_hcd 0000:00:13.2CI-DMA:Out of IOMMU space for 18 bytes.
3) The screen goes into text mode and prints what appear to be CPU register contents. I took a picture of this with my phone if it will help, but obviously the text is kind of hard to make out.
View 5 Replies
View Related
Aug 16, 2010
My 32-bit Celeron M laptop has a Linksys WPC300N PCMCIA wireless N card (Broadcom 4321 chipset).
I tried but have been unable to install the akmod version of the broadcom-wl driver:
Code:
Code:
Code:
Code:
Code:
FATAL: Module wl not found.
Code:
The card is recognized by lspci but the driver module broadcom-wl is not found. I don't see b43 and ssb modules so I can't blacklist them.
View 3 Replies
View Related
Jan 2, 2010
I have a Dell Inspiron E1505, which has the Dell Wireless 1505 (Broadcom) card. To run the card, I installed the Broadcom STA wireless driver, which seems to activate the wireless card OK. The problem is that once I installed that driver my onboard Ethernet card was deactivated (and yes, it is enabled in BIOS). I had to remove the wireless driver to get the Ethernet back. Does anyone have ideas? I haven't found this problem listed elsewhere. I am running Ubuntu 9.04 with no other problems.
View 5 Replies
View Related
Aug 2, 2010
I have Ubuntu 10.04 installed and can browse the internet via cable, but wireless isnt working. My wireless driver is "Broadcom 802.11b/g WLAN".
In the windows device manager, I found the corresponding inf file to be oem20.inf which I tried to install it through "Setup Windows Driver" but it gave an error saying invalid driver. I also tried installing the Broadcom STA driver, but that didnot help.
I am dual booting with Windows 7, and i installed ubuntu through the windows wubi installer. My laptop is HP Pavilion dv4. I have installed the regular Ubuntu desktop and have made all upgrades. The results from lspci command i have added below.
gowda@ubuntu:~$ lspci
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
[Code].....
View 2 Replies
View Related
Nov 9, 2010
Update 29/04/2011 The new broadcom driver is included in the 2.6.38 kernel that comes with Ubuntu 11.04 Natty Narwhal I suggest everyone to just upgrade to the new version. Update 07/01/11 user some-one the problem with git sources has been solved. At the moment the only commit version that compiles in 10.10 is this one:[URL].. Download the .tar.gz file in your home directory and extract it.
[Code]...
View 9 Replies
View Related
