I really wanna use the OS. I wiped my laptop and installed it but I can't change my screen resolution (it's stuck at 1024 X 768 and my refresh rate is at 0 HZ) I tried installing a driver that was for both the i9xx and i8xx chipset family but it doesn't look like it helped anything. I want to be able to play World of Warcraft Wrath of The Lich King but when I try it the way the computer is now the the frame rate is really really slow. I also need to fix my audio because there's crackling that comes from the speakers often. I attached a screen shot of what I get when I enter the command: sudo lshw -c video Changing the resolution isn't the problem so much as the fact that I can't change the refresh rate from "0 HZ" to anything higher so that my game will play smoothly. I would also like to put compiz fushion on my laptop as well but I don't believe it will work unless I resolve this problem.
I have recently upgraded to Ubuntu 10.10. However the bottom of the screen is cut off with only a trace of it visible. I had similar problems with version 10.04 where both and top and bottom of the screen were not displayed.
I have noticed that version 10.10 does not use the proprietry driver the previous versions used.
In desparation I have tried Kubuntu but the results are still much the same.
Does anyone have any idea how I can display a full screen with an Nvidia integrated graphics controller.
I am running Ubuntu 10.10 on my old Acer Travelmate 661 LCi. Device manager tells me: info.linux.driver i915. Is there a better driver, and if yes, where can I get it and how can I install it.
Just got World of Warcraft Installed and when I start the game after I get past the 2 cinema's while I'm trying to click yes on the rules the screen seems to bee flashing over and over and over. I was thinking maybe the 3d accelerator isn't installed or maybe I need to install something because its Intel?
I am testing Suse 11.3 and have run into a problem with Intel's integrated graphics and resolution. Here is a dump of the hardware information I pulled from yast.
I tarred my system (NVidia based) and restored it on 2 other different machines. (Intel g965 and SIS 661/741/760) On both of them I see
Code: $ sudo lshw -C display *-display UNCLAIMED As a result I can't enable compiz (visual effects), cairo dock is unusable (noGL version, GL won't run at all) - it shows a huge black rectangle as its background even when the dock is hidden. I think the problem is that the video driver is not enabled, I need your help making it work. After the restore during the 1st boot X complained that it can't find NVidia and showed me the options use default settings generate new settings (I used this one) So now one of the PCs:
I have a desktop computer with integrated ATI graphics. Specs below and lspci log attached. I was running 9.04 Jaunty Jackalope until 1 week ago. Everything worked fine from the day I installed it. It's default driver worked fine and graphics requiring applications like Google Earth and Secret Maryo Chronicles (game) ran smoothly. Then about a week or so ago I did a clean install of Lucid on this PC. And now Secret Maryo Chronicles runs choppy and Google Earth doesn't run and display images smoothly. I could understand having problems like this if I were switching to Fedora or something but I'm still using the same distro (and both are recent versions).
Computer Specs: ATI Radeon Xpress 200 integrated graphics with 256 MB RAM Intel Pentium 4 clocked at 3.00 Ghz 2 GB RAM (.25 being used for graphics card) 500 GB Hard drive (355 for Ubuntu) 2 DVD drives
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
I'm using a lenovo notebook with switchable graphics (Intel HD and ATI Radeon 5650), and I'd like to have Ubuntu use the integrated graphics, but I can't figure out how. The BIOS has two graphics options: switchable and discrete. On discrete just the ATI card runs, but on switchable, it seems like both cards are being used. Is it possible to use just the integrated graphics?
in ubuntu land i have been thinking and i have intergrated HD graphics on my craptop i bought it for my study so it doesn't really matter but my theoretical max graphic memory is 3GB and i am only using 128 MB now has any one figured out a way to alter the default ;/. im sure it is possible to increase processing power form the split with CPU to but im sure acer have locked such capability.
This problem doesn't really have anything to do with Linux, but I've used Linux exclusively for 10 years and this system is Ubuntu bound anyway, (plus i don't trust other forums, always with the windows) so... Basically, my brother's GF's computer has a broken integrated graphics card. Literally. Some of the the solder points have broken, and it just doesn't work anymore. The plan is/was replace it with an Nvidia Geforce N6200 AGP since it has an AGP slot. The rest of the MoBo seems fine.
The problem is I don't know how to switch from the broken integrated graphics to the new AGP. The screen will not come on with the monitor plugged into either of them. Will a bios reset switch them for me (so I can finally fix this damn thing)? Or is a new motherboard necessary?
I've found that whenever I play a 3D game on Ubuntu, the graphics go crazy and make the game unplayable. I've found this an various games such as SuperTuxKart and Alien Arena.By the way, I'm running an ATi Radeon Xpress 200 (integrated graphics) with the default Ubuntu drivers.
have a system that has a GTX285 and a PCI 8400GS. I'm running Ubuntu 9.10 I'm trying to get the system to use the 8400GS to run X windows and the GTX285 to use as the compute device. Everytime I start up my system with both cards it always uses the GTX285 as the display device. How do I configure it to use the 8400 instead? I've tried the nvidia settings program and I don't see how to do this. Do I need to change something in my xorg.conf ? I don't know much about editing this file.
my PC can have resolution of 1024x768 while running Windows XP and Ubuntu 6, but on Mac OS X and Centos 5 I just can use in 800x600 resolution mode.in Centos, i did:
I am trying to write a script to turn my HTPC off automatically and turn it back on again at a specified interval.
I've got the turn on off bit sorted using /sys/class/rtc/rtc0/wakealarm but I want the script to not turn the machine off if say something is downloading, I am currently watching something etc and i dont think I will have any trouble with that.
But what I would really like to be able to do is tell if my TV is currently on. I dont think anything x11 related would work here and this may not even be possible. Does Ubuntu "know" if it's display device is powered on or not? if so can I interrogate this somehow?
I'm having a problem here with my graphics card. Until not very long ago I was using the controller Ubuntu downloaded for me. However I recently downloaded another one from the ATI page, called ati-driver-installer-11-3-x86.x86_64.run and installed it. So far, I've encountered two new problems:
1. The ATI Catalyst Control Center would not open after I setup the Tear Free Desktop.
2. The computer is running slow. Files take longer to open, minimizing and maximizing windows takes longer. Wi-fi connection takes longer to connect, etcetera. Overall, everything is going slow.
Are these problems related? I would like to uninstall the driver as the computer was working just fine before. In addition to this, I have firefox 4.0 and the colors on most of the images are darker than they should. The images look fine on other browsers except firefox. I read I had to do type "about:config" in the address bar, find "gfx.color_management.mode" and change the value from 2 to 0. What did I exactly do there? I took the advice from this thread: [URL]
My onboard bluetooth is not being detected by SUSE 11.4. Fedora 14 has no problem detecting the hardware, but it just doesn't show up in SUSE 11.4. I have included a few outputs:
lsusb:
Code: Bus 008 Device 002: ID 045e:0745 Microsoft Corp. Nano Transceiver v1.0 for Bluetooth rfkill list
[Code]....
If I plug in a dongle, the Bluetooth icon shows up in the notification bar, and I'm able to add and remove devices normally. Is there support for my onboard bluetooth device?
I have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.
One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?
I have installed the latest debian on a dell optiplex gx260 which has a 82845G chipset and there are some strange problems.The system is configured with autologon as a standard user. Sometimes, after logging on, the screen goes black but if I connect to it with vnc, I get a working desktop. Yesterday I booted it without a display attached to it and now I cannot set it to the right screen resolution anymore (1440 x 900) which was working fine before.
I have googled and searh the forum but cannot find the right information. According to Intel, the latest driver should be in the distro but I cannot find any details about that (version/date). grep Driver /etc/X11/xorg.conf returns
I've got a "little" problem with fedora 13: dual head with nouveau is not working. gnome-display-properties recognizes two displays and i can configure it (left, right, mirroring, ...) but first display is always in standby. Seems it doesn't get a signal from graphics controller. Desktop seems to work fine (can move the mouse pointer on the other screen into "the black hole"). I use Fedora 13 x86_64.
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I have Dell E6510 laptop with i5 CPU (Arrandale), Intel HD integrated graphics card (Ironlake), and 1080p display. I know other distros are also having problems with Ironlake but there are some work arounds.
Is there a way to install 5.5 on my laptop and have UI and 1080p resolution?
I have to say that 5.4 Live runs well - UI loads with correct resolution. With 5.5 live I get black screen.
Currently I have 5 HID's I would like to use on the system at any given time. However, I have the problem of them using different device paths depending on what order I plug them in... Which wreaks havoc on qjoypad and also my music software which looks for a specific device number, which may or may not be the same as it was last time.
For example, I have 2 rock band drum controllers which I use to send MIDI signals. I need them always assigned to the same device path, so that I don't have to change the settings in my music software every time I run it, to make sure it's looking at the right controller
Or if I am going to play games with a gamepad, but I also have the drums hooked up, the gamepad may be assigned to /dev/input/js2, so I create my qjoypad profile.... Let's say the next day I reboot with the drums not plugged in, the gamepad is now /dev/input/js0, and the qjoypad profile won't work because it is looking for that gamepad at /dev/input/js2... So I would either have to create a new profile, or hook the drums back up in the same order ... Or something
It's just a mess...
Is there any way to tell Ubuntu to say "/dev/input/js0 is always Playstation gamepad", "/dev/input/js1 is always drum pad 1", etc.?
Or some way to do away with /dev/input scheme altogether and somehow link directly to the name of the device?
I need to either force a redetection of my hardware or get the system to use the specific piece of hardware it is no longer using. Details Fedora 12 NVidia chipset/audio controller Modprobe details of device "nVidia Corporation MCP79 High Definition Audio" Tried installing kudzu but it does not install....
For years I have used a Slax live CD on a laptop to clone internal HDDs to USB HDDs. I recently purchased a Sony VPCF136FM laptop with Intel Core i7 CPU. It apparently has USB 3.0 ports. The problem is the USB ports are dead with Slax. There is a USB devise driver available for Windows 7 from Sony but nothing for Linux operating systems. Can this driver be ported to Linux? It is an exacutable (XXX.exe). The chip for the USB Host is from Renesas Electronics (no help there, either). Where can I find a device driver to use with Slax and how would I install it?
My wireless device is an integrated Dell Wireless 1397 WLAN Mini-Card, I am unsure about the driver I have in use. I am sure I have a driver installed because the configuration screen shows my network. I currently have the computer plugged into my network via CAT 5 but I would like to be able to use the wireless (obviously.) I am using Open SuSE version 11.2 and I have run the updater. I could not see my wireless network before running the updater and I can now so I know that the updates have helped but I am again stuck. I have tried to search the wireless forum and I have tried to tinker with the settings in YaST , but nothing seems to be working. Reading the Welcome page of the wireless forum, I tried the Broadcom chip-set advice:
[Code]...
I have read and taken to heart the advice given for receiving help and if any more is needed I will gladly give it. I have a small amount of experience with SuSE Enterprise edition so I can understand some technical stuff but I am best at following specific instructions.
