! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.
One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?
I've installed Suse linux 11.3 (kernel 184.108.40.206-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code: X.org X Server 1.8.0 Release Date: 2010-04-02 [ 15.124] X Protocol Version 11, Revision 0 [ 15.124] Build Operating System: openSUSE SUSE LINUX [ 15.124] Current Operating System: Linux linux-7xhd 220.127.116.11-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64 [Code]....
in ubuntu land i have been thinking and i have intergrated HD graphics on my craptop i bought it for my study so it doesn't really matter but my theoretical max graphic memory is 3GB and i am only using 128 MB now has any one figured out a way to alter the default ;/. im sure it is possible to increase processing power form the split with CPU to but im sure acer have locked such capability.
My system occasionally, not often, but enough to bring me to do something about it, keeps freezing. Hard lock-ups. This is a known bug for openSUSE 11.3 and intel video cards. So, I tried some suggestions and updated my kernel to 2.6.35. Nope. Same prob. I updated Xorg, mesa, drm, cairo (had to go to Factory for that one). I finally got all the requirements met as listed on Intel Linux Graphics: 2010Q2 and I download the intel 2d driver, since it's newer than what comes with openSUSE, even in Factory (xorg-x11-driver-video-intel-legacy 2.9.1).Now, when I go to compile the driver, it errors out on ./configure.how do I let this intel driver package know where xorg-server is?
I've been using Mandriva (and predecessors) for ten years or so, but that distro really seems to be dying at the moment. Consequently, I am trying to move over my various PCs to SUSE. I've started with my EEEPC 901 which has a 945GME integrated graphics chip. Using Mandriva 2010.2 it works fine and I can have desktop effects (built into KDE) running with no problems. However, with KDE on openSUSE 11.4 I get irregular freezes, although I can still work within the focussed window. Moving around though, clicking on other parts of the desktop etc. doesn't work, then after a few seconds they all happen at once. I am getting the following error multiple times in the X log, which I suspect is associated:
Code: EQ overflowing. The server is probably stuck in an infinite loop.
I note this supposedly fixed bug report that may be relevant:[URL].. Secondly, I am getting hopeless 3D speed (glxinfo reports SGI and has all expected output). Desktop effects won't work at all, on boot it pops up a message saying they are disabled as too slow. I know it isn't a benchmark, but glxgears gives about 50, it used to give over 500. I remember a few X versions back having to enable UXA mode instead of EXA in the 'intel' driver, but presumably that is no longer needed and I cannot see any effect of doing that now (in the xorg.conf.d device file). According to the X log, X is definitely using 'intel' driver, not fb etc.
I am running Opensuse 11.4 on a file server, based on an Intel Atom motherboard with 945G graphics chipset.I recently shut down and then rebooted the server (because I needed to switch off the power for a few minutes) after it had had been running quite happily for several weeks since the last boot. Now I cannot start X - it gives up after the line(EE) intel(0): failed to set mode: Invalid argumentI've tried googling but am none the wiser what could have caused this, or how to fix it. Excerpts from the X log file:
Just got World of Warcraft Installed and when I start the game after I get past the 2 cinema's while I'm trying to click yes on the rules the screen seems to bee flashing over and over and over. I was thinking maybe the 3d accelerator isn't installed or maybe I need to install something because its Intel?
I have Dell E6510 laptop with i5 CPU (Arrandale), Intel HD integrated graphics card (Ironlake), and 1080p display. I know other distros are also having problems with Ironlake but there are some work arounds.
Is there a way to install 5.5 on my laptop and have UI and 1080p resolution?
I have to say that 5.4 Live runs well - UI loads with correct resolution. With 5.5 live I get black screen.
i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
i am using fedora 14. i need graphics driver for Intel 82579v . while moving folders it shows poor graphics.Login screen open as step by step. while playing videos ,it hang.my system is very slow now with high configuration. My system hang while improve graphics option in System-> Preference->Desktop Effects and select compiz and
what all graphics functionality does Intel's i915 graphics driver support?( blending,blitting ).By looking at the source code it appears to me that it support just 'fill rectangle' and 'image blitting'.Is that all?
I want to downgrade my Intel driver to version 2.11.0. I don't know what version I have at the moment but I have installed Fedora 15 (Lovelock). The reason is that Office 2007 has graphical bugs with Intel drivers that are newer than 2.11. So, will my gnome shell work fine after the downgrade and how to downgrade? I have searched a lot from google but didn't find any solutions.
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
My computer is Compaq Presario CQ61-110ED notebook pc Mijn videocard is:Intel Graphics Media Accelerator 4500MHD Where can I download a driver for Intel Graphics Media Accelerator 4500MHD by the Ubuntu 32/64 bits, version 9.10?
I'm about to upgrade a server for a local non-profit, and am looking at a Gigabyte GA-P55-UD3L motherboard and an Intel Core i5 750 processor. Does anyone have any observations or experiences with SUSE on this platform?
I own a MB with H55 Chipset and a Core i3 540 with openSuse 11.2.I tried kernel 2.6.32 and 2.6.34 and the newest Xorg delete the xorg.conf and got a fine picture on the screen (same with xorg.conf and device "intel") Even HD MKV is possible. But in KDE I can only open one programm. If I try to open a second programm the desktop disappear and I get the KDM screen and have to login again and the former started programm is gone. Only if I start the programms via an open Terminal window the programms will run. I tried to delete all .kde(x) directories, but it�s the same after restart.Only if I use driver "fbdev" in the xorg.conf I get no problem. But then the screen is very slow.
I would like to know if I will be able to work on my laptop with 11.4 , someone knows if something changed with hang/freeze issues? Currently I have installed 11.1 but since repositories were removed no updates or new software for me so I'm considering installing something new.
I'm using a lenovo notebook with switchable graphics (Intel HD and ATI Radeon 5650), and I'd like to have Ubuntu use the integrated graphics, but I can't figure out how. The BIOS has two graphics options: switchable and discrete. On discrete just the ATI card runs, but on switchable, it seems like both cards are being used. Is it possible to use just the integrated graphics?
I recently installed openSUSE on a new Toshiba and i'm getting very choppy video while watching videos on ....., justin.tv, etc. The video is fine as long as I don't full screen. However, when I try to fullscreen a stream on justin.tv or a ..... video, it instantly becomes choppy and video is extremely delayed in relation to the sound. The sound still continues at it's regular pace, however the video lags behind and is just choppy in general.Also, not sure if this helps, but i'm running an i3 2310M.
I have a desktop computer with integrated ATI graphics. Specs below and lspci log attached. I was running 9.04 Jaunty Jackalope until 1 week ago. Everything worked fine from the day I installed it. It's default driver worked fine and graphics requiring applications like Google Earth and Secret Maryo Chronicles (game) ran smoothly. Then about a week or so ago I did a clean install of Lucid on this PC. And now Secret Maryo Chronicles runs choppy and Google Earth doesn't run and display images smoothly. I could understand having problems like this if I were switching to Fedora or something but I'm still using the same distro (and both are recent versions).
Computer Specs: ATI Radeon Xpress 200 integrated graphics with 256 MB RAM Intel Pentium 4 clocked at 3.00 Ghz 2 GB RAM (.25 being used for graphics card) 500 GB Hard drive (355 for Ubuntu) 2 DVD drives
This problem doesn't really have anything to do with Linux, but I've used Linux exclusively for 10 years and this system is Ubuntu bound anyway, (plus i don't trust other forums, always with the windows) so... Basically, my brother's GF's computer has a broken integrated graphics card. Literally. Some of the the solder points have broken, and it just doesn't work anymore. The plan is/was replace it with an Nvidia Geforce N6200 AGP since it has an AGP slot. The rest of the MoBo seems fine.
The problem is I don't know how to switch from the broken integrated graphics to the new AGP. The screen will not come on with the monitor plugged into either of them. Will a bios reset switch them for me (so I can finally fix this damn thing)? Or is a new motherboard necessary?
Just a little background I have a sony vaio VPCZ119X laptop and have been struggling to get all components working under linux especially the intel graphics. I saw that once I upgraded to the latest available kernel release which currently is 2.6.37 rc7. The intel graphics is working, but sometimes when I boot I get a blank/black screen but seems to be lit up. All other functions seem working so for example I am able to login etc just that I dont see anything on the screen.
I have tried the following so far to identify the issue or isolate it:
- Switching to the console screens has no effect, still the black / blank screen.
- Restarting the system does not always immediately get the screen working, sometimes it takes a couple of reboots before the screen is available
- I have a switchable graphics with nVidia I never get this problem when I use the nvidia driver
- I have tried closing the lid etc as suggested in the below post without any change in output, will try further as there are other options available as well The "Black Screen" on Boot I see one difference between both the Xorg log files but I am not able to reason out why this happens hence I will just supply the files here and try not to theorize.
Xorg.0.log - This was the log output when I got the X display working Xorg.o.log.old - This was the log output when the X display was black/blank Also to highlight that I am using the latest kernel release that is still being tested I guess so maybe it is also a bug in the kernel?