CentOS 5 :: 5.5 Installs With No UI On A Laptop With Intel Integrated Graphics HD "Ironlake"
Dec 24, 2010
I have Dell E6510 laptop with i5 CPU (Arrandale), Intel HD integrated graphics card (Ironlake), and 1080p display. I know other distros are also having problems with Ironlake but there are some work arounds.
Is there a way to install 5.5 on my laptop and have UI and 1080p resolution?
I have to say that 5.4 Live runs well - UI loads with correct resolution. With 5.5 live I get black screen.
View 8 Replies
ADVERTISEMENT
Aug 18, 2010
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
View 8 Replies
View Related
Sep 1, 2011
in ubuntu land i have been thinking and i have intergrated HD graphics on my craptop i bought it for my study so it doesn't really matter but my theoretical max graphic memory is 3GB and i am only using 128 MB now has any one figured out a way to alter the default ;/. im sure it is possible to increase processing power form the split with CPU to but im sure acer have locked such capability.
View 5 Replies
View Related
Nov 25, 2010
As this seems not yet to be covered in openSUSE Graphic Card Practical Theory Guide for Users I am asking here.
The Motherboard is an Asus P7H55-M Pro with Intel Core i3 530@2.93GHz. openSUSE 11.3 assigns the i915 driver by default:
Code:
# lspci -vk
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 12) (prog-if 00 [VGA controller])
Subsystem: ASUSTeK Computer Inc. Device 8383
Flags: bus master, fast devsel, latency 0, IRQ 30
code....
View 9 Replies
View Related
Jul 18, 2011
[code]...
Just got World of Warcraft Installed and when I start the game after I get past the 2 cinema's while I'm trying to click yes on the rules the screen seems to bee flashing over and over and over. I was thinking maybe the 3d accelerator isn't installed or maybe I need to install something because its Intel?
[code]...
View 2 Replies
View Related
Aug 19, 2010
I have been unable to get both opensuse 11.2 and 11.3 32 bit versions work properly on my DELL Latitude E6410 laptop. With both 11.2 and 11.3 KDE Live CDs I get no graphical display when I attempt to boot into the Live system. VESA mode does not help either, only text mode works. So I installed the system in text mode but during the first boot the screen went blank again.
One peculiar thing is that 11.1 installs and boots fine, what gives? Is this even supported or I shouldn't even try to bother getting this setup to work? Has anyone been able to run opensuse 11.3 on a Core i7 integrated Intel graphics system with X system working?
View 9 Replies
View Related
Nov 17, 2009
my PC can have resolution of 1024x768 while running Windows XP and Ubuntu 6, but on Mac OS X and Centos 5 I just can use in 800x600 resolution mode.in Centos, i did:
# lspci | grep -i VGA
00:02.0 VGA compatible controller: Intel Corporation 82945G/GZ Integrated Graphics Controller (rev 02)
# lspci -n | grep -i 00:02.0
00:02.0 0300: 8086:2772 (rev 02)
then went to [URL] but found no drivers for 8086:2772 no drivers for VGA Intel 82945G/GZ?
View 1 Replies
View Related
Dec 23, 2010
I have an intel core i3 laptop, it has 4gig of ram only showing 2 I am also running the x64 bit version of fedora 14.. My graphics will not work correctly. I have tried the intel driver for linux.. It did not work( or i did something wrong) very possible in messing up the install. I would llike to know if there is an update coming out or if i could get a step by step on how to fix, this issue..
View 2 Replies
View Related
Nov 18, 2010
for some reason the drivers for my laptop graphics are not showing up.
The laptop I have is Acer 1810T. It has intel GMA 4500MHD graphics.
I also have a desktop which has Nvidia 9800GT graphics card and the drivers for that showed up automatically when i went to additional drivers in ubuntu.
View 1 Replies
View Related
May 2, 2010
I have a Gigabyte GA-MA74GM-S2 motherboard with integrated graphics that shows up on lspci as an ATI Radeon 2100. I also bought a PCI-Express Nvidia graphics card so I could use the VDPAU feature on Linux (plays H.264 in hardware). The BIOS has three settings about which display to initialize first:
Integrated graphics
PCI graphics
PCI-Express graphics (PEG)
I set the BIOS on PEG, but
I cannot get anything, not even a splash screen or POST messages, to emerge from the PCI-Express graphics card. (I'm using a DVI connector; the card also has an HDMI output.)I cannot get the kernel lspci to see the graphics card; the only VGA controller it acknowledges is the integrated one.Running dmidecode acknowledges the existence of an x16 PCI Express slot, and it says
Current usage: Unknown
There is an additional BIOS setting called "Internal Graphics Mode" which is normally set to "Auto" which means it is supposed to prefer a PCI Express VGA card. I set it to "Disabled" which now means I'm getting no output at all. I will soon be learning how to do a BIOS reset!
Other information: The PCI-E card is a MSI N210-MD512H GeForce 210. This is a fanless card. Although there are no fans to see turning, the heat sink on the PCI-E card is definitely getting hot, so the card is getting some sort of power.It gets all its power from the PCI-E slot; there is no external power connector.The BIOS is an AMI Award BIOS.how can I make the PCI Express graphics card visible to Ubuntu?
View 1 Replies
View Related
Nov 18, 2009
Does CentOS 5.4 support Intel Q45 graphics chip? If it does not support, How do I install the driver manually?
View 1 Replies
View Related
Nov 26, 2010
I've installed CentOS 5.5 64 bit on a Dell Latitude e6410. This model only contains Intel HD Graphics, not the extra Nvidia card you could also buy in addition. The getinfo output can be found here:[URL] Initially X11 did not work at all (blank screen), but using hints from other posts in this forum I was able to fix this by editing the file xorg.conf using the vesa driver, although I still do not get the native screen resolution of 1200x800 (I alwas get 1152x768).
Now I want to add an external monitor (Samsung Monitor connected via DVI, screen resolution 1680x1050). Unfortunately as soon as I try to configure the dual head mode using the system-config-display tool after restart of the X server there will be the the blank screen again. I tried various drivers with no luck.Has anyone succeeded setting up dual head on an Intel HD Graphics machine? I understand that this hardware is quite new and and would be easier to set up with more recent distros, but I would like to stick to CentOS, but cannot wait for CentOS 6.
View 1 Replies
View Related
Mar 17, 2010
I have a Dell Dimension 3000 with an integrated Intel 865g graphics card that I am trying to use in X on Centos 5.4 i386. The "810" driver (what Centos configures by default) works, but will not display at 1600x900. Strangely enough, it will actually work at higher resolutions such as 1600x1200, but 1600x900 fails, even with 915resolution and 855resolution. The "intel" xorg driver (included with Centos) locks up the entire machine when starting X, so thats a no go as well.
The "fbdev" driver works but, once again, won't display 1600x900, because that resolution doesn't work properly with the version of the intelfb kernel module that Centos bundles. Fedora Core 12 works perfectly fine at 1600x900 on the machine. I think that if I could get a newer xorg installation (or perhaps just a driver) going under Centos, it might fix the problem. I couldn't find any 3rd party repos containing such packages. I'd really rather run Centos on the machine, due to the package stability (yes, I see the irony here).
View 1 Replies
View Related
Apr 28, 2010
I am using CentOS 5, I have recently installed it on my Dell LATITUDE laptop but the resolution was 800x600. I've tried to put it on 1680x1050 and it worked out well I guess but the graphics had become very slow. For example I have to wait 5 to 6 seconds to scroll from page to page in a pdf file. Minimizing a window takes also a lot of time. I have a NVIDIA card in my PC.
View 5 Replies
View Related
Aug 24, 2010
I'm using a lenovo notebook with switchable graphics (Intel HD and ATI Radeon 5650), and I'd like to have Ubuntu use the integrated graphics, but I can't figure out how. The BIOS has two graphics options: switchable and discrete. On discrete just the ATI card runs, but on switchable, it seems like both cards are being used. Is it possible to use just the integrated graphics?
View 8 Replies
View Related
Jan 2, 2011
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
View 9 Replies
View Related
May 22, 2010
I have a desktop computer with integrated ATI graphics. Specs below and lspci log attached. I was running 9.04 Jaunty Jackalope until 1 week ago. Everything worked fine from the day I installed it. It's default driver worked fine and graphics requiring applications like Google Earth and Secret Maryo Chronicles (game) ran smoothly. Then about a week or so ago I did a clean install of Lucid on this PC. And now Secret Maryo Chronicles runs choppy and Google Earth doesn't run and display images smoothly. I could understand having problems like this if I were switching to Fedora or something but I'm still using the same distro (and both are recent versions).
Computer Specs:
ATI Radeon Xpress 200 integrated graphics with 256 MB RAM
Intel Pentium 4 clocked at 3.00 Ghz
2 GB RAM (.25 being used for graphics card)
500 GB Hard drive (355 for Ubuntu)
2 DVD drives
View 2 Replies
View Related
Oct 20, 2010
This problem doesn't really have anything to do with Linux, but I've used Linux exclusively for 10 years and this system is Ubuntu bound anyway, (plus i don't trust other forums, always with the windows) so... Basically, my brother's GF's computer has a broken integrated graphics card. Literally. Some of the the solder points have broken, and it just doesn't work anymore. The plan is/was replace it with an Nvidia Geforce N6200 AGP since it has an AGP slot. The rest of the MoBo seems fine.
The problem is I don't know how to switch from the broken integrated graphics to the new AGP. The screen will not come on with the monitor plugged into either of them. Will a bios reset switch them for me (so I can finally fix this damn thing)? Or is a new motherboard necessary?
[Code].....
View 5 Replies
View Related
Jan 27, 2011
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
View 5 Replies
View Related
Jan 10, 2010
I can only log into X with "vesa" driver (otherwise it gives me the black screen) and ubuntu never boots directly into GDM, always the console.
View 1 Replies
View Related
Dec 25, 2010
I previously had a dual output Nvidia 7300le which worked fine with 2 monitors (2xDell e196fp). Now however I have just added a new monitor to my setup (and a different graphics card). I've gotten to the stage where it recognises all 3 monitors (2xdell 196fp and 1x samsung syncmaster) and also the new graphics card (Nvidia PCIe 210)...it took me ages to get to this stage and a lot of hacking around in the bios!
I've got it so that it runs two monitors fine (the two connected to the graphics card) but I cant manage to extend the desktop onto the monitor connected to the integrated GPU (I can on windows). It definitely recognises it as when I startup it gives me a command prompt on the 3rd window (integrated gpu) and then when I do startx it runs the session on the other two monitors!
[Code]...
View 1 Replies
View Related
May 10, 2010
I have an ethernet card that used to work with Linux, but it had its firmware corrutped. (not as a result of the kernel its a different model) I think it had something to do with the thunderstorm I was using the computer in. Anyway, it is an Intel 82562EZ 10/100 Ethernet Controller (rev 01). The device manager in windows xp calls it an Intel PRO/100 VE card, which I think is the same thing. The card works in windows but not in linux. Upon firing up the intel proset software, and running hardware diagnostics the test says the eeprom test failed. Is there any way I can flash the eeprom so I can have a working card?
EDIT: Card fixed after leaving unplugged. It is important to also unplug the power supply connectors from the motherboard as well as capacitors may not discharge otherwise. Also be sure to remove the cmos battery. Oh, yeah don't try to use that intel utility on integrated networking devices. "IBAUTIL is not intended as a utility for LAN-On-Motherboard (LOM) [integrated] implementations."
View 1 Replies
View Related
Apr 8, 2011
I have Ubuntu Natty installed on my computer, and I cannot activate the desktop effects and animations. I know that they can be activated, as I used them on Gutsy, but they have somehow been disabled during an update. I want to reactivate them, but every time I try I am told that they cannot be activated because the right graphic card drivers are missing. I have an integrated Intel card on my computer. Is there any way I can reactivate the visual effects? If not, how was I able to activate them in Gutsy?
View 1 Replies
View Related
Feb 1, 2010
I'm about to buy a laptop and there are some interesting and affordable Toshiba ones, but they all have Intel GMA 4500M graphic card. I have NVIDIA card on my desktop and their drivers work perfectly, i was just wandering what the situation with Intel's graphic cards is. I need 3D rendering for compiz and stuff, is it too much of a hassle to enable them?
View 2 Replies
View Related
May 16, 2010
i upgrade a machine running centos 5.4 to 5.5 this morning. After the update the X start i saw the pointer and a black backgroud only the desktop doesn't appear.The machine is a barebone with this configuration
00:00.0 Host bridge: Intel Corporation Mobile 945GM/PM/GMS, 943/940GML and 945GT Express Memory Controller Hub (rev 03)
00:02.0 VGA compatible controller: Intel Corporation Mobile 945GM/GMS, 943/940GML Express Integrated Graphics Controller (rev 03)
00:02.1 Display controller: Intel Corporation Mobile 945GM/GMS/GME, 943/940GML Express Integrated Graphics Controller (rev 03)[code]....
and i solved the black screen problem changing the driver for i810
Section "Device"
Identifier "Videocard0"
Driver "i810"
EndSection
View 2 Replies
View Related
Sep 15, 2010
I am testing Suse 11.3 and have run into a problem with Intel's integrated graphics and resolution. Here is a dump of the hardware information I pulled from yast.
[Code]....
View 1 Replies
View Related
May 25, 2010
I have a PCI graphics card, Nvidia Geforce FX 5500, but can't get it to work. I have 10.04 installed on a Dell Dimension 3000, P4, 1Gb RAM, integrated graphics. I installed 10.04 without the card in the machine, then shut down and plugged the card in and booted it up again (BIOS setting is 'onboard' for integrated graphics, 8Mb; only other option is 'auto'). Checking the hardware drivers I can see the recommended Nvidia drivers (v173, not yet activated) and lspci gives me the integrated as well as the Nvidia listing:
01:02.0 VGA compatible controller: Nvidia Corporation NV34 [GeForce FX 5500] (rev a1)
00:02.0 VGA compatible controller: Intel Corporation 8286G Integrated Graphics Controller (rev 02)
So far so good, but that's where it ends. Changing the BIOS setting to 'auto' turns the screen off on reboot, both for the monitor connected to the VGA port of the Nvidia card and for the monitor connected to the VGA port of the motherboard. I have to shutdown, take the card out and set the BIOS back to 'onboard' to be able to boot again (and shutdown, plug the card back in and boot up again to get back to where I was).
Activating the recommended hardware driver and rebooting (still with BIOS set to onboard) gives a blank screen (screen is still on and there may have been a flash of the purple screen with the ubuntu logo); nothing else happens no matter how long I wait. Rebooting doesn't help, it turns off the screen; same result for booting in recovery mode. I can get to the GRUB bootloader and when I replace 'quiet splash' with 'nomodeset' I manage to boot again with the monitor connected to the VGA port of the motherboard, but am not anywhere closer to getting my monitor working on the Nvidea card.
View 5 Replies
View Related
Jan 30, 2011
I've found that whenever I play a 3D game on Ubuntu, the graphics go crazy and make the game unplayable. I've found this an various games such as SuperTuxKart and Alien Arena.By the way, I'm running an ATi Radeon Xpress 200 (integrated graphics) with the default Ubuntu drivers.
View 3 Replies
View Related
Oct 17, 2010
I am fairly new to Ubuntu, so I'm sorry if I don't include any necessary information. Installed 10.10 rc from CD about 3 days prior to official release and everything was working fine... went about installing software and setting up laptop for use. About one week later, got prompted for upgrade and went ahead through update manager. Now can't enable desktop effects. Right after upgrade had a period where title bars of windows would not display... menus were present, but no title bars, no maximize/minimize/close buttons and no dragging windows to new locations on screen That has since resolved itself. Spent quite awhile searching forums, created xorg.conf at one point, later deleted it.
compiz-check says this:
Code:
./compiz-check
Gathering information about your system...
Distribution: Ubuntu 10.10
Desktop environment: GNOME
Graphics chip: Intel Corporation Core Processor Integrated Graphics Controller (rev 02)
Driver in use: intel
[Code]...........
View 1 Replies
View Related
Nov 5, 2010
I have recently upgraded to Ubuntu 10.10. However the bottom of the screen is cut off with only a trace of it visible. I had similar problems with version 10.04 where both and top and bottom of the screen were not displayed.
I have noticed that version 10.10 does not use the proprietry driver the previous versions used.
In desparation I have tried Kubuntu but the results are still much the same.
Does anyone have any idea how I can display a full screen with an Nvidia integrated graphics controller.
View 9 Replies
View Related
