Ok I am still having this issue using the intel driver in gentoo. xf86-video-intel is already installed
I followed this guide but still no luck: [URL]
The problem is, when using "startx" the screen goes black and is frozen.
Xorg works fine with the vesa driver but is horribly slow.
[Code]...
When I installed Arch Linux on my Toshiba L10 Intel Centrino laptop, it detected my video card and monitors correctly "out-of-the box". Now that I've installed Ubuntu 10.10 "Maverick Meerkat", it has not.
How can I configure Ubuntu to use the correct Intel drivers with my Intel 82852/855GM graphics card?
I am running Ubuntu 10.10 on my old Acer Travelmate 661 LCi. Device manager tells me: info.linux.driver i915. Is there a better driver, and if yes, where can I get it and how can I install it.
View 1 Replies View RelatedI have a fairly new laptop, 2*1.8 Ghz, but when I try to run games more advanced than pac-man, it's about 1-0.5 frames / second. This doesn't seem right. I've goggled it, and found a few posts from 2008-2009, but nothing that actually helped. Does anyone have any idea, as to what might be wrong? If anyone has this card, I'd like to see what you have in your /etc/X11/xorg.conf file...
@art:~$ lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03)
[code]...
Just got World of Warcraft Installed and when I start the game after I get past the 2 cinema's while I'm trying to click yes on the rules the screen seems to bee flashing over and over and over. I was thinking maybe the 3d accelerator isn't installed or maybe I need to install something because its Intel?
[code]...
i'm a true newb with ubuntu. I've tried to find online how to get my graphics card up and running but all the places i check are way over my head. I've been a windows guy forever. Basically the graphics work on my laptop but won't do anything 3d right now. This makes me think i'm not using a correct driver. I've got no clue where to dl the from the ubuntu interface or what to do.
View 9 Replies View RelatedDo you guys remember the inability for lucid to boot with some intel graphics cards?
http://ubuntuforums.org/showthread.php?t=1466337
http://ubuntuforums.org/showthread.php?t=1472282
Anyway I used a workaround to get it working on my Toshiba Portege laptop. However from it stemmed slower graphics, no splash, et cetera. That didn't worry me too much. However, I am now at the stage where I am getting arrays of different issues (that don't necessarily relate) and I would like to just have a nice clean install. I have been upgrading since 8.something and I long for freshness. My files are allready off.
Has anyone patched the kernel or anything? I'm purely a newbish end user and have not been following launchpad or anything. I did the workaround the week of the release. any fixes floating around? If not, I'll go back to 9.10.
I recently installed the Intel 855GM Drivers and I m quite satisfied with my experience with the improved system perfrmance :] However. I am curious as to if there is a fix for the Compiz aspect. From my previous understanding as of about 3 weeks ago there weren't any available patched or fixes for that particular issue.
View 1 Replies View RelatedI really wanna use the OS. I wiped my laptop and installed it but I can't change my screen resolution (it's stuck at 1024 X 768 and my refresh rate is at 0 HZ) I tried installing a driver that was for both the i9xx and i8xx chipset family but it doesn't look like it helped anything. I want to be able to play World of Warcraft Wrath of The Lich King but when I try it the way the computer is now the the frame rate is really really slow. I also need to fix my audio because there's crackling that comes from the speakers often. I attached a screen shot of what I get when I enter the command: sudo lshw -c video Changing the resolution isn't the problem so much as the fact that I can't change the refresh rate from "0 HZ" to anything higher so that my game will play smoothly. I would also like to put compiz fushion on my laptop as well but I don't believe it will work unless I resolve this problem.
View 9 Replies View RelatedJust installed Ubuntu 11.04, and everything is perfect, except my video card. Ubuntu 11.04 refuses to run my labtops integrated Intel 855GM video card in OpenGL hardware accelerated mode. Everything is really slow/unresponsive compared to earlier versions, windows are rendering painfully slow etc. From what I can gather, problem is, 11.04/newest Compiz is OpenGL 1.4, and my video card only supports 1.3 (?). Now, I have tried downgrading Compiz following this link: [url]
No luck so far.. OpenGL is still software only. Do I need to edit some ini-file or xorg.conf, or am I missing something here?
After upgrade to Slackware 13.0 (then 13.1, then -current) I still have problems using the secondary video output on my old and trusted Toshiba Satellite (Intel chipset 852GM/855GM). This used to work with Slackware 12.x! The problem manifests itself by jumpiness on the secondary port. The jumps appear with any video update (eg. window focusing, but also with the updates from the Clock or the CPU graph).
This is very annoying, particularly because I use this machine to teach. In only one combination (with a NEC NP-100 projector) I can solve the problem by reprogramming the Framerate to 70 or 75 Hz. After reading many mails and references on the 'net, testing a lot of the solutions to no avail, I'm more confused than ever. And no visible improvement either. Here are a couple of the tests I did:
1) I added i915.modeset=1 to LILO. This helped in the sense that now, in text mode, the 2nd video output remains working, which is slightly useful. But no improvement after startx.
2) Xorg.0.log says:
(II) intel: Driver for Intel.....
then, continues with:
(II) VESA: driver for VESA chipsets: vesa
Why are both drivers signalled here? (solved this by generating a new config with Xorg -configure, but no difference)
3) The intel driver says (in Xorg.log): compiled for 1.7.6, while X -version says 1.7.7 (is this significant?)
4) After this, the line
(EE) intel(1): No kernel modesetting driver detected appears in the Xorg log. This wasn't there when no xorg.conf was present.
5) On the other hand, without an xorg.conf, there was a line complaining about a missing 'fbdev', this seems solved afterwards.
6) Just in case, tried software cursor on/off.
7) Maybe unrelated: After enabling modesetting (which should have been enabled by default),LCD brightness resumes correctly after 'sleep'(before, it would switch to low brightness every time).
Just did a clean install on a Dell Latitude E6400 of Slackware 13.1 and, for the most part, all is working great. Got wicd installed and wireless came right up, nvidia drivers installed and video is fantastic, but for some reason my wired connection isn't happening. The device is detected, but I can't get an IP.
Code:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
[Code]...
what is really a rant disguised as a question, but does anyone have this combination working? My NetGear router shows the connection as allowed from the MAC address in the router logs, And I can see the network I want to join in the list of visible networks from the laptop, but dmesg shows Ubuntu disconnecting with
WPA-PSK [TKIP] only:
wlan0: disassociating by local choice (reason=15)
WPA-PSK [TKIP] + WPA2-PSK [AES]
wlan0: disassociating by local choice (reason=3)
I'm sure there is a simple explantion that has been sufficiently buried somewhere but after several hours of googling and searching the forums here I can't find it. Anyone want to help out an old man RTFM?
I'm getting really disappointed here lately - things are getting worse, not better. In my case in particular I have this laptop with supposedly open and supported drivers and they don't work, however, the exact same distributuon on a Dell D830 with a broadcom NIC does. under 8.10 and 9.04 this worked out the box - just logged in, gave the PSK and away we went. I can't see the attachment I just uploaded so to include the information requested in the "how to get help" post, I'll put it all here inline...
Code:
Machine Brand and Model (PC/Laptop): Lenovo R61
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
[Code]...
I have a problem with compiz and this card, after few weeks suddenly it doesn't work with ubuntu, I always had troubles with this kind of cards, I was always able to solve it by this forum but this time I gave up.
The driver for GM965/GL960 is working perfectly but the compiz effects although they are enabled they are not applied to the desktop environment.
The compiz-check output is:
Code:
Gathering information about your system...
Distribution: Ubuntu 11.04
Desktop environment: GNOME
Graphics chip: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
Driver in use: fbdev
[Code]...
I installed Fedora 14 on my new PC but I don't have network connection. In fact, I hit the command "lspci" and the prompt return :
Code:
Ethernet Controller : Intel Corporation 82579V Gigabit Network Connection
So, I created a ifcfg-eth0 file on /etc/sysconfig/network-script because it doesn't exist :
Code:
DEVICE=eth0
TYPE=Ethernet
BOOTPROTO=dhcp
ONBOOT=yes
Then, I restart network service, but eth0 is down, no device found for the connection eth0.
I have been getting from my wireless adapter. This has been going on for quite some time but only now am I able to see a pattern. The behavior seems to be the following: Start up, connects to network and work fine until I suspend my machine. On wake up, it works again but after a seemingly random amount of time the connection is lost and I can no longer find any networks. Attached is dmesg output after startup and connecting to a wireless network (dmesgAfterConecting.txt) and the same after the connection has been lost (dmesgAfterConnectLost.txt). I get this error which seems important:
[Code].....
my platform Centos 5.3
i did the following
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
[Code]....
I am new to Ubuntu and I have problem with wireless connection. I could not find any wireless connection at all. I am now using wired connection. Sony Vaio SZ series, Intel Corporation PRO/Wireless 4965 AG or AGN My software details are:
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]....
Lets get straight to the point. im using Karmic, and as said by the title my audio card is not detected. lspci -v gives the following:
Code:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: ASUSTeK Computer Inc. Device 1763
[code]....
About a year ago, I installed ubuntu on my ThinkPad X61, which was running windows. I basically just overwrote the hard drive, assigning one partition to the install. The graphics have always been a little buggy when it comes to 3d rendering or flash. Flash graphics flicker a lot and 3d rendering leaves trails or doesn't show up at all. Is there a way to configure the graphics card? I'm completely unexperienced when it comes to graphics cards and don't know where to start. I don't even know how to access its settings.
View 1 Replies View RelatedI've reinstalled Slackware 4 times today because of things I've messed up along my way, after upgrading the linux kernel I've had issues with getting back to desktop, so I'm on a clean slate right now with the exception of installing wicd. I need help since wireless is not working.. My wireless worked fine out of the box with Ubuntu,I don't understand why it is not working now... Using Slackware 13.1, Kernel 2.6.33.4
Code:
bash-4.1# ifconfig wlan0 up
SIOCSIFFLAGS: No such file or directory
[code]....
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
I was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
[Code]...
I have been trying to enable compiz on my fedora 14, but when i enable the desktop effects the graphics just crashes and fedora freezes. When i type lspci -nnk | grep VGA for the graphics card i get:
I made alot of research on how to get Intel graphics work on Fedora, but couldnt find any solution
Same problem I had with Fedora Core 12 and 13.
I'm releaving a HP Probook 4710S from it's native Vista) First of all let me say I'm happy because CentOs 5.6 handles it's Ati Radeon graphic flawlessly, unlike other Distro's I tried on this type of machine. So thumbs up for CentOs! But now I've come to a stop on the wireless card.
[Code]...
I have installed FC13 (x64) but X Server fails to start on my machine having "Intel Corporation 82G33/G31" Integrated Graphics Controller. find the attachments xorg.conf & Xorg.0.log. My smolt id is [URL]...
View 1 Replies View RelatedI have a problem with the latest Fedora. Installed it cleanly on a machine with Gigabyte H55M-S2 with Intel Core i3. There seems to be no sound and I checked to see if anything is muted but is not. The manual says that the sound chip is ALC888B so this could be the first problem. Any ide how I can make it work? Here is a dump of some things on my system.
Code: [weaz ~]$ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
[weaz ~]$ uname -a
Linux EarthwormJim 2.6.35.6-48.fc14.i686 #1 SMP Fri Oct 22 15:34:36 UTC 2010 i686 i686 i386 GNU/Linux
[code].....
I just installed Debian 8.1 with Mate desktop environment. I have a laptop with Intel® HD Graphics 5500.When I try to play a game like Left 4 Dead 2 or Torchlight 2 I get extremely low FPS.I also have Ubuntu 14.04 Mate on another partition. The games run fine there.I don't understand why this big difference. Maybe I have to install or configure something..
View 4 Replies View Relatedi previously posted a thread http:[URL].. that was regarding gaming issue, but now i got a bigger issue. i installed Intel 2010Q2 graphics package from [URL].. i first upgraded xorg-x11-server and related packages and installed devel package using yum.. later i compiled and installed kernel 2.6.34 and other packages included on [URL].. i rebooted the system and it showed display driver unknown so, i used system-config-display --reconfig and it detects my mobile 4 intel chipset. and when i reboot, GUI won't load .. when services finish loading screen goes blank and harddisk light blinks at constant intervals and i can't switch from GUI to CUI either using CTRL + ALT + F2 etc [URL].. PS i am able to login into single user and change xorg.conf
View 6 Replies View Related