Ubuntu Multimedia :: Override Nvidia's Display Resolution Selection
Jul 27, 2010
Recently I encountered a problem with a triple-monitor setup where the EDID was rejected by the nvidia driver (version 195.36.0, claiming that the EDID checksum was invalid. The maximum resolution that the driver would allow was 640x480. Searching through the X logs (/var/log/Xorg.0.log), I found the following message:
Code:
(WW) Jul 26 21:37:57 NVIDIA(GPU-0): The EDID read for display device DFP-0 is invalid: the
(WW) Jul 26 21:37:57 NVIDIA(GPU-0): checksum for EDID version 1 extension is invalid.
[Code].....
View 3 Replies
ADVERTISEMENT
May 31, 2010
I am new to opensuse and have installed 11.2 KDE. It is simply perfect for my system. However after the initial setup the display resolution was set perfectly fine for my 18.5" LED monitor, default resolution was 1366x768, and everything looked good from desktop to fonts but the OSS drivers didn't support compositing so I decided to switch to nvidia drivers. I installed the driver as shown in openSUSE repositories page, for my 6600GT card. Now after rebooting everything is stretched,even the fonts look really ugly and fuzzy.
I am unable to find any mode in Nvidia XServer settings that would correct the current ugly stretched display. I am unable to set 1366x768 manually as well, doing so my PC won't boot to KDM but rather sticks to console. Now it's for sure that my monitor and display card supports 1366x768 resolution but it's just that nvidia drivers/Nvidia XServer settings won't let me set that resolution. How can I set the resolution or even better if I can enable compositing using OSS drivers then that would be great an dm willing to switch back.
View 9 Replies
View Related
Feb 26, 2010
I'm using Ubuntu 9.10 64-bit with a GTS 250. After installing the restricted driver from NVIDIA's website I get stuck at a 640x320 resolution. The only other option I get is 320x240. The resolution I need is 1680x1050.
I've also encountered this problem with a 9600GT.
View 2 Replies
View Related
Feb 5, 2011
I just bought a new 24inch monitor that supports the resolution 1920x1200. Unfortunately, the nvidia-settings dialog does not have this resolution as an option (currently running on 1920x1080). The graphics card is Geforce 6200 (should support the wanted resolution), and the monitor is connected with the VGA cable (if that matters).
View 7 Replies
View Related
Jun 2, 2010
I am on Lucid 10.04 with Nvidia 9600m (v195.36.24) My TV is 1280x720, my Laptop is 1600x900 (Closest setting to the TV is 1360x768 ). I plug my laptop to my tv via an HDMI cable. I press F1 to get into my presentation mode, and the tv shows most of the desktop, but not all of it. Is there any way to conveniently make it so it automatically sets it to 1280x720?
View 1 Replies
View Related
Jan 27, 2010
Since I upgraded to 9.04 a while back I have had this annoying screen resolution issue. Every time I log into my Ubuntu system the screen resolution defaults to 1280x1024. My preferred desktop resolution is normally set at 1680x1050. So each time I log in I have to open the Nvidia control panel and manually set the screen resolution to 1680x1050. Even after logging out it will still go right back to 1280x1024 when I log back in.
But the funny this is I am almost positive the login screen resolution is 1680x1050 because the picture is crisp unlike the blurry and distorted picture at 1028x1024. I have tried everything from manually editing the x.org conf file to running the Nvidia control panel as root. Nothing saves my preferred resolution of 1680x1050. My Nvidia driver is version 190.42 and Ubuntu version is 9.04. The monitor is an ASUS VW192T+ which is detected by the Nvidia driver.
View 2 Replies
View Related
Jun 11, 2010
Ubuntu 10.04, nVidia GeForce 9400, driver ver 195.36.15.When I log in, the system always comes up in 800x600 mode. I went into the NVIDIA X Server Settings page and changed it to my preferred setting of 1152x864. I hit Apply, then Save to X Configuration File (with correct root password).All is well until restarting. Then it reverts back. The update doesn't stick. How can I make this the permenant setting?
View 3 Replies
View Related
Jul 13, 2010
I'm a first timer on Ubuntu and I have a little problem with my Nvidia graphic card. After lots of attempts I can't get the 1280x1024 resolution that both of my monitors have. Instead I'm running on 1024x768.Is this a way to fix it?
View 8 Replies
View Related
Jan 30, 2011
Running Ubuntu 10.04 with an Acer wide monitor, 1600x900. The graphics card is a Gefoce 6200. When I run nvidia-settings I can select 1600-900 and it looks fine. I can "Save to X configuration file" and get no errors. However if I log out and back in, the resolution changes to 1360x768 which causes the tool bar at the top to be mostly somewhere to the left of and above the monitor. It makes life rather difficult when you can't get to the Applications and Places menus. I also tried nvidia-configure but it created essentially the same xorg.conf file.
This is the xorg.conf file generated:
Quote:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Sun Nov 8 21:50:38 PST 2009
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
[Code]....
1600x900 is the native mode of this monitor so the driver shouldn't be getting any errors if it trys to set that resolution.
View 1 Replies
View Related
Jan 21, 2010
in my media pc i have a geforce 8400, attached to a 32" 720p lcd using a dvi to vga adapter, and it is miss detecting the resolution it detects the resolution as 1080p, so when i try to enable full gpu scaling it gets the resolution wrong resulting no image on the screen. how do i manualy set the "back end resolution"
View 6 Replies
View Related
Mar 25, 2011
I know there are a lot of threads out there for same or similar issues, but nothing I found was working for me until, by sheer chance, I found this very simple solution on the Fedora forums. Too elegant not to share.Environment:Ubuntu 10.10nVidia GeForce 5500Samsung SyncMaster 225BWUsing DVI cable (in case it matters)Issue:After installing the proprietary nVidia drivers, the screen resolution was no longer the correct native resolution of the display. In my case specifically, the nVidia X Server Settings utility was detecting the maximum supported screen resolution was 1280x1024 while my display's native resolution is 1680x1050.Solution:Open a Terminal window.Make a backup copy of the original xorg.conf file. This is just good form any time you are making config file customizations.
Code:
sudo cp -p /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
Open 'xorg.conf' in a text editor.
[code]....
View 1 Replies
View Related
Jan 5, 2010
I am new to Ubuntu (Karmic with GNOME). I have a Samsung LED UEB7020, with an Asrock ION 330 BD player feeding to a Onkyo TXSR607, AV rec. The other day I downloaded NVidia v180.25, which was very useful, because it immediately solved an earlier teething problem of no sound. However immediately upon re-booting and ever since, the screen size is too big for the TV, meaning that I can not see the top, bottom, side and left of the display by about 2 inches either way. I have checked the NVidia resolution settings and they are correct for the TV, ie 1920 by 1080.
My etc/X11/ xorg.conf file reads as follows:
Section "Screen"
Identifier "Default Screen"
DefaultDepth 24
EndSection
Section "Module"
Load "glx"
EndSection
Section "Device"
Identifier "Default Device"
Driver "nvidia"
Option "NoLogo" "True"
EndSection
View 9 Replies
View Related
Jun 21, 2010
Having been using squeeze on my primary system for some time, I decided to install it on my media center PC. After doing a clean install I lost sound (another post) and my maximum video resolution dropped to 1280x1024. I was previously getting 1920x1080 (native) resolution under lenny on this box. So it's a mystery to me why I'm not getting that now. As you can see, the nvidia module is loaded:
# lsmod | grep nvidia
nvidia 9821382 0
i2c_core 12570 2 i2c_piix4,nvidia
PS--This was installed the "debian way" via module assistant.
View 2 Replies
View Related
Sep 16, 2010
I am stuck at 1024x768 in Ubuntu 10.04 with the nVidia GeForce 7100. I installed the drivers suggested by nVidia on their website, but it doesn't seem to heighten my resolution any. 1024x768 is the highest which appears in nVidia X Server Settings.
Xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder101) Fri Aug 27 21:34:01 PDT 2010
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Configured Keyboard" "CoreKeyboard"
[Code]...
Is there a way to fix this without having to buy a new card? I've read that the GeForce 7100 is pretty crappy, but I've got no money to space at the moment.
View 9 Replies
View Related
Dec 3, 2010
I'm using a NVIDIA 9600M GT on my laptop running Ubuntu 10.10. The laptop has a 16:10 display, I also connected my 16:9 LCD TV via HDMI. I would like to use them as clones. The problem is, as my TV has a different aspect ratio than my laptop display, the image does not fully fit on the TV. For example, when using a resolution of 1280x800 (16:10), one tenth of the width of that image is missing on my TV, as it has an aspect ratio of 16:9.
In Windows, the NVIDIA software stretches the image so that it appears a little distorted on my TV, but at least I see everything. Is it possible to do that in Ubuntu?
View 1 Replies
View Related
Jan 14, 2011
Im running Ubuntu 10.10 on an Nvidia ION gpu. I've installed the latest driver using the built in driver tool and by downloading from nvidia. Both times this has been the result at every resolution:[URL]
View 3 Replies
View Related
Sep 9, 2010
I recently purchased a cheap computer to use for everyday tasks. It came pre-loaded with Windows 7. The monitor I am using is a Vizio VX20L. It's native resolution is 1366X768. I have no problem with the screen resolution in Windows 7 but in Ubuntu, I am having some issues. I have the propriatary Nvidia driver installed in Ubuntu but for some reason I cannot get the screen resolution right. I am currently using a resolution of 1360x768 and the right part of my desktop is not on the screen.
I have tried to adjust the screen size using the monitor settings, but I still cannot get the whole screen to show up. If I set the resolution to Auto in the NVIDIA X Server Settings, it defaults to 1280X1024 and I can see my whole desktop, but it is streeeeetched. Here is some relevant information pertaining to my system:
I'm using Ubuntu 10.04
Integrated Video chip is NVIDIA GeForce 6150SE
The driver I'm using is NVIDIA accelerated graphic driver (version current)[Recommended]
screen is a Vizio VX20LHD
View 3 Replies
View Related
Feb 23, 2010
I have a Dell E6500 laptop (1280x800 screen), which I frequently dock.The dock as two Dell 1908FP 20" monitors connected by DVI. I can move between the laptop display and the twins by manually changing display configuration in NVIDIA X Server settings, but this is a pain requiring about 15 clicks each time.
I have tried using the "Save to X Configuration File" option in the Nvidia server settings, but this seems to screw everything up. I need to dynamically change between the setups... anyone have advice on getting that done?Can the xorg.conf file be configured to do it?My xorg.conf looks like this:
Section "Screen"
Identifier"Default Screen"
DefaultDepth24[code]......
View 5 Replies
View Related
Aug 2, 2010
Unable to get high res, colour or 3-D acceleration working with 8.04 Hardy. Not a hardware problem as it works perfectly in dual-boot XP.
[Code]...
View 6 Replies
View Related
Jan 4, 2010
Is it possible to have gnome's display settings recognise higher refresh rates than 56hz, as my nvidia is set to 85hz, but gnome display still thinks its 56hz, and I believe this is causing many programs I'm using to refresh at 56hz. Compiz works beautifully after overriding the refresh rate inside it, as it too thought I was using 56hz instead of 85 but many games aswell as CairoDock as jerky, which makes me think it is a refresh issue.
How can I make gnome know I'm using 85hz?
View 5 Replies
View Related
Nov 5, 2010
I have recently upgraded to Ubuntu 10.10. However the bottom of the screen is cut off with only a trace of it visible. I had similar problems with version 10.04 where both and top and bottom of the screen were not displayed.
I have noticed that version 10.10 does not use the proprietry driver the previous versions used.
In desparation I have tried Kubuntu but the results are still much the same.
Does anyone have any idea how I can display a full screen with an Nvidia integrated graphics controller.
View 9 Replies
View Related
Aug 17, 2011
having trouble setting up a dual monitor from my Dell xps laptop using an HDMI port. It dual boots onto Ubuntu 10.04. The computer has a Nvidia GeForce GT 555M with Optimus graphics card I need to make sure I have not installed the restricted drivers. So I think what is happening right now is that the graphics are shown off the integrated graphics card. This is my output from <lspci | grep VGA>
Code:
00:02.0 VGA compatible controller: Intel Corporation Device 0126 (rev 09)
01:00.0 VGA compatible controller: nVidia Corporation Device 0dcd (rev a1)
The forum recommends to use this program called Bumblebee but I have had some issues with that in the past. Is there somehow I can setup my dual display while staying on Ubuntu 10.04 and not installing Bumblebee? I have researched into setting up dual display walkthroughs before but they all concentrate on nvidia or ATI configurations.
View 6 Replies
View Related
Dec 7, 2009
I searched the archives and didn't find anything on this, and was just wondering if there is a problem if you load Ubuntu 9.1 and have a display that's higher than 1024x768. I'd prefer a machine with a higher res, but I've heard that Ubuntu will only go as high as 1024x768.I'm guessing, however, that by 9.1, it should recog the higher res while loading and it won't be a problem, but thought I'd check before shelling out on a machine with a nicer display.
View 9 Replies
View Related
Apr 12, 2010
After some fudging around, I managed to get my 64-bit karmic install to output sound digitally to my amplifier. So far, so good. The amplifier indicates a sample rate of 44.1KHz, while it is capable of 48KHz (higher sample rate would be better, i assume). Also, more annoying, it indicates no signal when no applications are producing sounds, causing it to miss the first second of output when I unpause my music. Windows 7 outputs everything as 48KHz, apparently also outputting silence as the light doesn't blink when i pause a media player.
The question then being: How do I override the default sample rate of digital audio output (if this is even possible, googling suggested that this might be overridden by applications); How do I make my sound driver output silence when no application is outputting sound.
Additional info:
- Ubuntu Karmic x64 (dist-upgraded from jaunty)
- Exaile media player with Normal playback engine and Automatic audio sink
- Asus P5Q-E motherboard
- Philips DFA888 amplifier
View 3 Replies
View Related
Jan 1, 2011
After closing some game my display resolution turned into 640x480 so I tried to modify xorg.conf to the following but I noticed that there are disappeared sides (at right & left) in my monitor and fonts appear small and ugly! How can I fix this issue?
[Code]...
View 2 Replies
View Related
Feb 14, 2011
I have installed the restricted driver, but I am stuck without a 1280x1024 video mode for any of my monitors.(Have tried 2) nvidia-settings doesn't want me to go above 1360x768, which is very strange.How do I get this thing running my optimal 1280x1024?
View 9 Replies
View Related
Jun 18, 2010
How can I change the behavior of the selection buffer or a program that uses it ( I have xclip) to not send me text until the mouse button is released while clicking and dragging? This causes havok in the software I'm developing that tries to make use of the selection buffer. I need the full selection, not bits more bits more bits and then the full selection.EDIT: I cannot listen for mouse events such as button release outside of the GUI of my program.
View 2 Replies
View Related
Apr 19, 2010
I purchased a lenovo G550 recently and immediately dumped the Windows OS for Ubuntu 9.10. The display is currently defaulting to 1366x768. From reading it looks as though this display can support both 16:9 and 16:10 aspects. I have ran through the xrandr commands attempting to set my resolution to something...anything bigger than 1366x7768 (I'm used to 1600x1200 from my old T61, so this is painfully small). As a test I am trying to get 1920 1200, from my xrandr results it looks like it should be within the lcd's range. xrandr commands failed on me as I have seen on a couple other intel based resolution problems. I don't fully understand the root of the problem and have not had any luck in my searches. So I have also attempted to manually create the xorg.conf file, not luck yet.
Code:
user@Home:~$ sudo ddcprobe
vbe: VESA 3.0 detected.
oem: Intel(r)Cantiga Graphics Chip Accelerated VGA BIOS
vendor: Intel Corporation
product: Intel(r)Cantiga Graphics Controller Hardware Version 0.0
[Code]....
View 4 Replies
View Related
Jun 9, 2010
I'm running 10.04 desktop on a Dell PowerEdge T710 connected to a Dell 22" LCD (E2210). The T710 uses a Matrox G200eW chipset. For some reason, I can't set the display resolution to the native res of my monitor (1680x1050). For what it's worth, here are the contents of /var/log/Xorg.0.log:
X.Org X Server 1.7.6
Release Date: 2010-03-17
X Protocol Version 11, Revision 0
Build Operating System: Linux 2.6.24-27-server x86_64 Ubuntu
Current Operating System: Linux map-renderer-1 2.6.32-22-generic #36-Ubuntu SMP Thu Jun 3 19:31:57 UTC 2010 x86_64
Kernel command line: BOOT_IMAGE=/boot/vmlinuz-2.6.32-22-generic root=UUID=95546d53-2465-4192-84e4-ed7d2a6a8491 ro quiet splash
[Code].....
View 7 Replies
View Related
Nov 15, 2010
I have a Dell U2311H monitor which has a native resolution of 1920 x 1080. My graphics card is an ATI 6870.
Last night I installed Ubuntu 10.10 alongside my Windows installation, and when booting into Ubuntu, the maximum resolution I can select is 1280 x 1024.
How can I resolve this to get Ubuntu to display at the native resolution?
View 9 Replies
View Related
