Ubuntu Multimedia :: Screen Resolution Stuck At 1024x768 - NVidia GeForce 7100
Sep 16, 2010
I am stuck at 1024x768 in Ubuntu 10.04 with the nVidia GeForce 7100. I installed the drivers suggested by nVidia on their website, but it doesn't seem to heighten my resolution any. 1024x768 is the highest which appears in nVidia X Server Settings.
Xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder101) Fri Aug 27 21:34:01 PDT 2010
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Configured Keyboard" "CoreKeyboard"
[Code]...
Is there a way to fix this without having to buy a new card? I've read that the GeForce 7100 is pretty crappy, but I've got no money to space at the moment.
View 9 Replies
ADVERTISEMENT
May 21, 2010
I installed 10.04 on my former windows box last night, and I seem to be stuck at a screen resolution of 1024x768. I have a Geforce 7600 GT graphics card, and I installed current drivers via the hardware drivers option. I can't go above this resolution in the nvidia x-server settings, and even xrandr says the highest resolution I can use is 1024x768. What is up with that, and how can I change it?
View 1 Replies
View Related
Sep 9, 2010
I recently purchased a cheap computer to use for everyday tasks. It came pre-loaded with Windows 7. The monitor I am using is a Vizio VX20L. It's native resolution is 1366X768. I have no problem with the screen resolution in Windows 7 but in Ubuntu, I am having some issues. I have the propriatary Nvidia driver installed in Ubuntu but for some reason I cannot get the screen resolution right. I am currently using a resolution of 1360x768 and the right part of my desktop is not on the screen.
I have tried to adjust the screen size using the monitor settings, but I still cannot get the whole screen to show up. If I set the resolution to Auto in the NVIDIA X Server Settings, it defaults to 1280X1024 and I can see my whole desktop, but it is streeeeetched. Here is some relevant information pertaining to my system:
I'm using Ubuntu 10.04
Integrated Video chip is NVIDIA GeForce 6150SE
The driver I'm using is NVIDIA accelerated graphic driver (version current)[Recommended]
screen is a Vizio VX20LHD
View 3 Replies
View Related
Sep 9, 2010
I am just getting into fedora and have installed it on an EMachine ET 1810. According to my SMOLT info, I have the above Video card. (my smolt info is in my signature). I had installed a couple of games that require 3d drivers in order for the game to play! but I can't find any.
View 3 Replies
View Related
Sep 3, 2010
I've googled the issue and had a little luck, though I can't seem to change my xorg.conf file because permissions are defailed. This is the example xorg.conf file I wrote based upon my original and the modifications:
# xorg.conf (X.Org X Window System server configuration file)
#
# This file was generated by dexconf, the Debian X Configuration tool, using
# values from the debconf database.
[Code].....
View 13 Replies
View Related
May 13, 2010
First off, let me say: I'm a long time Linux hobbyist and recently installed Fedora 12. I've been looking (some say "lurking") around these forums for a bit after I loaded it up and let me say: Leigh, You're an amazing young man! Keep up the great work! I've a question: I've just put together a hobby computer: Pentuim 4, with 1 Gig of RAM and a Nvidia Geforce5700LE. When I install Fedora from a fresh install, everything works great: nice screen resolution, good graphics, etc. but no 3d or acceleration, so I'm very limited on my programs.
So I decided I need to upgrade my Nvidia driver. I followed Leigh's Nvidia setup guide after installing Fedora 12 (all four steps!) everything seemed to go fine, but when I reboot, I quickly see the Nvidia splash screen, but the screen then goes blank. Well, not really blank, I can see what appears to be a kind of cross-hatch pattern, plus I can see what should be my mouse cursor on screen (it also is a square shaped pattern). I suspect it may be at a screen resolution that my monitor doesn't support. Once there, the computer pretty much doesn't do anything else. Usually I can break into the x driver loading and go to the command prompt, but this latest time I can't even do that.
View 10 Replies
View Related
Feb 26, 2010
I'm using Ubuntu 9.10 64-bit with a GTS 250. After installing the restricted driver from NVIDIA's website I get stuck at a 640x320 resolution. The only other option I get is 320x240. The resolution I need is 1680x1050.
I've also encountered this problem with a 9600GT.
View 2 Replies
View Related
Aug 26, 2015
I installed Debian 8 Jessie with the GNOME 3 desktop environment and I couldn't get pass the login screen after several reboots. Since I read that NVIDIA graphics are problematic, I decided to reinstall the system but selected Mate desktop, which appears to be less graphic intensive than GNOME 3. It worked. However, I can't get a higher resolution than 1024x768 (In Windows I could). The Mate settings in the "System → Preferences → Monitors" does not show higher resolutions.
The information of the graphics card is this:
Code: Select all00:0d.0 VGA compatible controller [0300]: NVIDIA Corporation C61 [GeForce 6150SE nForce 430] [10de:03d0] (rev a2)
Before I try to install proprietary drivers as instructed in [URL] ...., I'd like to see if there's anything to try first with the default stuff installed by the system, because that page says:
As of jessie, the need for the proprietary drivers is pretty much over - nouveau now works quite well and works with dual-headed displays by simple and easy configuring from within your desktop(for KDE see System_Settings/Hardware/Display_and_Monitor/Display_Configuration) . The proprietary drivers don't provide normal logging and can be a hidden source of problems.
View 7 Replies
View Related
Sep 9, 2011
I decided to install Debian on my Power Mac G4 (Digital Audio). Everything worked, but the default GeForce 2 only worked at 1024x768 at few colors. Is there any way to fix this?
View 1 Replies
View Related
Jan 1, 2011
After closing some game my display resolution turned into 640x480 so I tried to modify xorg.conf to the following but I noticed that there are disappeared sides (at right & left) in my monitor and fonts appear small and ugly! How can I fix this issue?
[Code]...
View 2 Replies
View Related
Jan 16, 2010
I'm having a real fight with an Nvidia 6100 video under 11.2. I cannot get anything besides 1024x768 or 800x600 resolution with any technique besides doing an upgrade installation over an existing 11.1 system. I want 1440x900 for this wide screen LCD and that works with the upgrade install but that gets me into other problems with versions and other stuff - not a desireable choice.
OK. I know that the Nvidia driver (190.53) works as all is well under the upgrade. When I do a totally clean installation or a clean install with the existing /home I get a default 1024x768. If I use sax2 to try and change it one of two things happens: the change is ignored or I drop to 800x600 and the ball game is over: I'm stuck there, period. Other than a couple of commented-out lines, xorg.conf is the same as it was or 11.1 (and back to 10.1 after allowing for version changes) after running sax2 but even nvidia-settings won't give anything beyond 1024x768 if I try and use that.
I've been through the how-to stuff and back messages here but I'll be darned if I can force the desired 1440x900. I had a similar issue with 10.2 or so where the only way to get it right the first time was to set the desired resolution to 1440x900 during the hardware setup during the installation but that seems to have disappeared along with xorg.conf which only appears after running sax2. I can't even use the manual diting tricks in xorg.conf I've had to use with some cards - it seems to be completely ignored and I can't see any real problem with it anyway once sax2 builds it. On a couple of machines with later version of the Nvidia video everything is working as expected, at least with GF 6800 and higher video.
View 2 Replies
View Related
Jan 14, 2009
I am using Mercury p4VM800 mother Board and Intel PIV 2 GHz Processor. I have installed the fedora 10 Today. My screen resolution was automatically set to 650x480 and this is the only option available in graphical mode. I am not able to increase the resolution to 1024x768. I once again reinstalled the F10. during the installation, in the boot: option I have entered 'linux resolution=1024x768', but it won't work.
View 4 Replies
View Related
Oct 19, 2010
Can't set screen resolution 1024x768 permanently. There is no tools like sax2 which is in openSUSE 11.2. I am to set screen resolution to 1024x768 every time after loggin in.
View 3 Replies
View Related
Nov 27, 2010
I'm trying to get my resolution to match the resolution I use in Windows 7 which is 1768 x 992 (50hz) Nvidia Geforce 210, LG Electronics 37LF75 - At the moment the top and bottom are both missing off the screen. Everytime I try to adjust my xorg.conf file it hangs at boot. Not really sure what exactly I'm doing with it.
xorg.conf
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 260.19.06 (buildd@yellow) Mon Oct 4 15:59:51 UTC 2010
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 260.19.06 (buildmeister@builder101) Mon Sep 13 04:59:45 PDT 2010
Section "ServerLayout"
[Code]...
View 4 Replies
View Related
Jun 19, 2010
Ubuntu 10.04. I have fglrx driver installed.. It appears when i set the resolution to anything higher than 1024x768... the login screen background is messed up to
View 2 Replies
View Related
Apr 6, 2011
Recently I have acquired 2-port KVM switch. When the monitor is connected through this KVM in Windows 7 resolution is properly detected - 1280x1024. When I go under Linux (openSUSE 11.4 with KDE, nVidia 260.19.44) there is a problem with the resolution. In the screen settings does not appear a resolution higher than 1024x768. How do I set the desired resolution in Linux?
View 4 Replies
View Related
Jan 27, 2010
Since I upgraded to 9.04 a while back I have had this annoying screen resolution issue. Every time I log into my Ubuntu system the screen resolution defaults to 1280x1024. My preferred desktop resolution is normally set at 1680x1050. So each time I log in I have to open the Nvidia control panel and manually set the screen resolution to 1680x1050. Even after logging out it will still go right back to 1280x1024 when I log back in.
But the funny this is I am almost positive the login screen resolution is 1680x1050 because the picture is crisp unlike the blurry and distorted picture at 1028x1024. I have tried everything from manually editing the x.org conf file to running the Nvidia control panel as root. Nothing saves my preferred resolution of 1680x1050. My Nvidia driver is version 190.42 and Ubuntu version is 9.04. The monitor is an ASUS VW192T+ which is detected by the Nvidia driver.
View 2 Replies
View Related
Mar 25, 2011
I know there are a lot of threads out there for same or similar issues, but nothing I found was working for me until, by sheer chance, I found this very simple solution on the Fedora forums. Too elegant not to share.Environment:Ubuntu 10.10nVidia GeForce 5500Samsung SyncMaster 225BWUsing DVI cable (in case it matters)Issue:After installing the proprietary nVidia drivers, the screen resolution was no longer the correct native resolution of the display. In my case specifically, the nVidia X Server Settings utility was detecting the maximum supported screen resolution was 1280x1024 while my display's native resolution is 1680x1050.Solution:Open a Terminal window.Make a backup copy of the original xorg.conf file. This is just good form any time you are making config file customizations.
Code:
sudo cp -p /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
Open 'xorg.conf' in a text editor.
[code]....
View 1 Replies
View Related
Feb 27, 2010
I currently have an nvidia 8600 gts w/nvidia restricted drivers and I cannot seem to change the resolution to anything higher than 640x480. Everything used to work perfectly w/the restricted drivers however I downloaded an update and it screwed everything up.
I have tried to edit my xorg.conf file but it seems that either i'm doing something wrong or the nvidia drivers are simply ignoring that file. I tried reverting back to the older versions of the drivers and that didnt seem to work. I tried installing the newest version of the nvidia drivers and that didnt work either. below is my xorg.conf file
[Code]...
View 4 Replies
View Related
Oct 1, 2010
I recently installed Debian 5.0 (Lenny) on a Dell Inspiron 1545 laptop. I have been banging my head trying to figure out why my laptop display (15.6" optimum resolution 1366x768) is only running at 1024x768. This was not a problem in Ubuntu even as far back as 8.10 (Intrepid Ibex) which came pre-installed.
I am running kernel 2.6.32 (from Backports) to get WiFi to work and it still hasn't remedied the video oddities.
How do I either:
1) Letterbox the 1024x768 so that it isn't distorted?
or, more preferably,
2) Display in the full 1366x768?
My video card is:
00:02.0 VGA compatible controller: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07)
I also have the xserver-xorg-video-intel driver from the stable repositories installed.
View 6 Replies
View Related
Feb 11, 2009
There I had legacy driver from nVidia but resolution was degraded to 640x320 and in their version 8.10 I cannot edit xorg.config (there was not anythig about resolution) I hoped in fedora i`ll fix this.
View 6 Replies
View Related
May 3, 2015
I'm now working to install Debian 8 on another computer since yesterday. Another Linux, and as always, endless list of problems.
- A computer that was freezing at every installation attempt (but never at the same moment) during installation when the Broacom cardbus adapter was connected (it's a chance that it is easy to remove and I found it quickly... and it is working once installation is finished)
- Turning to sleep mode after 15 seconds if I don't quickly try to login
- BOINC receive no work
- Tray icons are here but invisible - no icons, just gray space
- xserver-xorg-video-savage is installed, but I have resolution problems, and weird glittering horizontal lines when the computer is working (as on my other PC with the SiS video card).
On Debian 7.8, it was working fine for having the 1024x768 native resolution of this laptop screen.
But, with debian 8, the max resolution is now "800x600" and with this screen, there is no smooth effect : the image is a disaster.
Here is "lspci -nn" :
Code: Select all00:00.0 Host bridge [0600]: VIA Technologies, Inc. P/KN266 Host Bridge [1106:3156]
00:01.0 PCI bridge [0604]: VIA Technologies, Inc. VT8633 [Apollo Pro266 AGP] [1106:b091]
00:0a.0 CardBus bridge [0607]: O2 Micro, Inc. OZ601/6912/711E0 CardBus/SmartCardBus Controller [1217:6972]
00:0c.0 FireWire (IEEE 1394) [0c00]: Texas Instruments TSB43AB21 IEEE-1394a-2000 Controller (PHY/Link) [104c:8026]
00:10.0 USB controller [0c03]: VIA Technologies, Inc. VT82xxxxx UHCI USB 1.1 Controller [1106:3038] (rev 80)
[Code] ....
How to confirm that my Video card is included into xserver-xorg-video-savage package ? How do I know if the driver is loaded ? How to modify xorg confifugration files in this modern flavour of Linux in order to force adding the 1024x768 resolution ? I already succeed into /etc/default/grub and "update-grub" for the bootloader screen but I want it too in the desktop environment.
View 7 Replies
View Related
Oct 20, 2010
I have a BIG issue with my fresh Maverick install : when I install proprietary drivers via the graphic utility, either one proposed, the screen resolution is then max in 640x480. But I have hardware acceleration and compiz effects !
I tried, I think, everything. Forcing the resolution in xorg, in monitors.xml, try the newest ones via the ppa, install an older (and used to be working I'm positive) one with .run (which just prevent any graphic display).
View 9 Replies
View Related
Dec 26, 2010
Barebones installation. Manually start x with 'startx'. For some weird reason, the resolution randomly sets to either 1024x768 or 800x600. How do I permanently set a resolution?
View 1 Replies
View Related
Apr 5, 2011
I'm running 10.10. I have a Nvidia GTX 460. My actual resolution is only 1024x768. I can't get the native resolution (1280x1024). Nvidia-settings does not show this resolution. Google hasn't helped at all so far, and I have installed the Nvidia Driver.
View 2 Replies
View Related
Sep 7, 2010
I made a total reinstall of Slack 13.1 the other day and all went seemingly well. After a lot of experimenting and deciding I wanted the disk partitioned differently, a reinstall felt about right. But when I started X the resolution was all too low. xorg.conf was adjusted with the properties of my screen (GDM 4011P). Once upon a time, the Xorg config-tool would ask me my opinion, but now it flashes by and I have to live with what it comes up with.
The nVidia driver was installed (legacy for GeForce 3). I know the config is read, because it fails parsing if I have kHz with the sync-figures. But it otherwise disregard my wish to run at 1280x1024. In XFCE I can run the nVidia configuration tool, but it offers only auto, 320x240 or 640x480. The screen is too small for me to click "ok" on several occasions. The machine is capable of 64bit, 2GHz. But I installed the 32bit version of 13.1, it has 1,5GB RAM.
View 8 Replies
View Related
Feb 11, 2010
So yesterday, I my power went out on my desktop and when I rebooted, the screen resolution was stuck at 640x480. When I go to the display settings, no other higher options are available. Any suggestions?
View 1 Replies
View Related
May 6, 2010
I cannot get the restricted Nvidia drivers or the Nouveau drivers to work completely. If the Nouveau drivers are being used (after an "apt-get purge nvidia-*"), the text mode seems to work ok, but the X nouveau driver acts as if it cannot recognize the card. The only way I can get into X is to make sure I have the "nv" driver in the xorg.conf. I can then get into X normally.
If I install nvidia-current, the machine will just lock up at the splash screen. The Xorg.0.log file is zero bytes. I've checked and installing nvidia-current properly blacklists the nouveau drivers and I see no evidence in the messages file that the nouveau drivers tried to load in text mode. In fact, it shows the nvidia driver loading for console mode. I've tried the nouveau.modeset=0 kernel option as well, but that doesn't do anything. This is a fairly new nvidia card, maybe only a couple months old. I think it's been out for quite some time though. But it was working fine under Karmic with the restricted drivers. I really want to get this working as I need full support of the video card.
View 3 Replies
View Related
Jul 30, 2011
I've seen a lot of threads on this issue and combed through most of them trying to diagnose my problem and I've gotten REALLY close but with no complete success yet.I have a nVidia GeForce GTX 465 and I'm running HDMI out to my monitor. I have video but no audio. I can see the device in the Hardware tab of Sound Preferences but for the life of me I can't get it to play any audio (aside from testing with white noise).Output from aplay -l:
Code:
*** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC892 Analog [ALC892 Analog]
[code]....
View 2 Replies
View Related
Dec 5, 2010
I have install linux mint 10 on my system.After all installation finish,the screen resolution is stuck at 800 x 600(4:3).No matter how I try,just could not set the screen resolution to 1024 x 768. Below is system information for your kind assistance.
-Computer-
Processor: Intel(R) Pentium(R) 4 CPU 1.80GHz
Memory : 765MB (254MB used)
Operating System: Linux Mint 10 Julia
User Name: oem (oem)
-Display-
[Code].....
View 10 Replies
View Related
