Ubuntu Multimedia :: Override The Default Sample Rate Of Digital Audio Output?
Apr 12, 2010
After some fudging around, I managed to get my 64-bit karmic install to output sound digitally to my amplifier. So far, so good. The amplifier indicates a sample rate of 44.1KHz, while it is capable of 48KHz (higher sample rate would be better, i assume). Also, more annoying, it indicates no signal when no applications are producing sounds, causing it to miss the first second of output when I unpause my music. Windows 7 outputs everything as 48KHz, apparently also outputting silence as the light doesn't blink when i pause a media player.
The question then being: How do I override the default sample rate of digital audio output (if this is even possible, googling suggested that this might be overridden by applications); How do I make my sound driver output silence when no application is outputting sound.
Additional info:
- Ubuntu Karmic x64 (dist-upgraded from jaunty)
- Exaile media player with Normal playback engine and Automatic audio sink
- Asus P5Q-E motherboard
- Philips DFA888 amplifier
View 3 Replies
ADVERTISEMENT
Apr 29, 2010
I need to change the default ALSA sample rate from 48000 to 44100.
View 4 Replies
View Related
Jul 27, 2010
I've done a search on google and on here regarding my issue and I couldn't see anything.
I have the following audio device;
Code:
00:10.1 Audio device: nVidia Corporation MCP51 High Definition Audio (rev a2)
At the moment I have it playing through Analog Stereo Output. (See attached image)
The sound is mostly flawless and I haven't been having troubles with it.
But, because I play audio through my logitech speakers (2 speakers, 1 subwoofer) I should be able to get digital stereo sound shouldn't I?
From the drop down box of the attached image there are two options for Digital Stereo;
Digital Stereo Duplex IEC958
Digital Stereo IEC958 Output + Analog Stereo Input
None of them work for me. Even if I do a restart, I get no sound from Rhythmbox or Firefox.
I use the pulseaudio sound server and I have the PulseAudio device chooser installed. When I had the Digital Stereo Duplex IEC958 selected I used the Volume Meter playback to see if there was any sound coming through. Both left and right showed activity but nothing came through the speakers.
View 6 Replies
View Related
May 23, 2015
This is Debian 8. Pulseaudio uses 44100hz by default, with 48000hz as the 'alternate sample rate'. The hda sound driver on this (and seems most) audio hardware supports 44100, 48000, 96000 and 192000 sample rates. Anything else, pulseaudio resamples it. High quality resampling settings use more cpu resources, so it's best to use one of the supported sample rates, when possible. This is done by default for 44100 and 48000, but if you want to use 96000, for example, you have to set it in /etc/pulse/daemon.conf as "alternate-sample-rate = 96000". But this causes 48000 audio to be resampled.
Pulseaudio log, 48000 stream gets resampled:
Code: Select allD: [pulseaudio] resampler.c: rate 48000 -> 96000 (method speex-float-10)
while 96000 stream is copied:
Code: Select allD: [pulseaudio] resampler.c: rate 96000 -> 96000 (method copy)
44100 and 48000 defaults make sense since this is the majority of audio content these days, but I do have some 96000hz audio. I know there were reasons why it was limited to one alternate, but I could get around the issues. So, is there a way to configure more than one alternate sample rate for pulse audio?
View 0 Replies
View Related
Mar 14, 2010
Is there any way of changing the recording sample rate in the GNOME sound recorder? It's set at 22050Hz, and I'd like to record at 44100Hz. I can't find anything in the GUI to set preferences, and I can't find a text configuration file to edit, either.I've tried rec and arecord, but they both give a similar message:
I made it this way so that I wouldn't get audio lag in programs, but it also means I can't play audio in more than one application at a time, apparently (with some odd exceptions). I just got it from a thread in the Ubuntu forums, and it's worked fine for me so far.I'm really clueless here, as I've never had to fiddle around much with audio settings (let alone ALSA) before. I'm guessing I have to add something to .asoundrc, but I have no idea what...
View 2 Replies
View Related
May 27, 2010
I just installed Ubuntu 10.4 64bit and cant figure out how to get my digital audio working. I got sound using the 3.5mm jack.
View 7 Replies
View Related
Jun 5, 2010
My sound was working, but I got a new SPDIF cable, so I switched it to digital. It worked fine. But then I restarted and now it's gone.
aplay -l tells me I have no soundcard but lspci -v lists
00:14.2 Audio device: ATI Technologies Inc SBx00 Azalia (Intel HDA)
Subsystem: ASUSTeK Computer Inc. Device 836c
Flags: bus master, slow devsel, latency 64, IRQ 16
Memory at f9ff4000 (64-bit, non-prefetchable) [size=16K]
Capabilities: <access denied>
Kernel driver in use: HDA Intel
Kernel modules: snd-hda-intel
So my soundcard is there.
View 1 Replies
View Related
Mar 10, 2011
Alright so I just upgraded my 11.3 x64 to 11.4 using zypper dup and have now lost the ability to play digital output 5.1. Before doing the upgrade I was running alsa rather than phonon but apparently the upgrade decided to enable phonon, and I no longer show digital surround output. The soundcard I have is a CM8738 and I am using the coaxial output on it hooked into my receiver. In system settings->multimedia->phonon->speaker setup the soundcard shows and I have the ability to select different profiles.
However the digital output settings only show stereo and the sound output device the only one listed is CM8738 Digital Stereo (IEC958). I have selections for analog 5.1 and analog 7.1 but neither put anything out of the digital connection. As I said I was running alsa before and was able to do straight digital pass through which allowed my receiver to do the decoding and use all of my channels. How can I setup phonon to use digital passthrough, or switch back to alsa and get that setup again.
View 9 Replies
View Related
May 21, 2010
After upgrading from karmic to lucid I can't change a default refresh rate for my crt monitor connected to my laptop (lcd switched off). I know radeon driver is trying to check what's the highest possible rate and sets it around 85, but the screen starts to "shiver". If I manualy change this setting in system settings for the screen to 75, it is ok. But I have to do this after every boot I generated xorg.conf and the appropriate modeline (it shows in the screen settings), and I added it to both monitor and screen section. Nevertheless the refresh rate is set to auto again in system settings and the screen wiggles a bit. How to disable automatic detection and force my own settings?
P.S Here's my xorg.conf:
Code:
Section "ServerLayout"
Identifier "X.org Configured"
Screen 0 "Screen0" 0 0
InputDevice "Mouse0" "CorePointer"
[Code].....
View 2 Replies
View Related
Jan 2, 2011
I still can not get HDMI audio workign on my zotac.. there is a lot of post that talk about it here but i can not seam to get any of them to work, and may are pre mavrick...
I made a sim post a while back about ubuntu but no one replied....
I am no truing xubuntu but still no luck
Like there is this post but it is from 2009... so all the inputs are wrong.. [URL]
I am using a fresh install of xubuntu off the official desktop ISO from the xubuntu site. All i have done is install, activate the NVIDIA hardware drivers, reboot, then download and apply the 150 or so updates though the update manager.
Code:
cat /proc/asound/version
Advanced Linux Sound Architecture Driver Version 1.0.23.
Code:
aplay -l
**** List of PLAYBACK Hardware Devices ****
[Code]....
View 1 Replies
View Related
Mar 7, 2010
I installed KMplayer but I cant play video files...No video output but can get only the audio output...So how to make this work for videos?
View 2 Replies
View Related
Jan 25, 2011
Running 10.10 and win 7 on my HP dv6-2150us laptop and I'm having a few issues.
First how do I get HDMI audio output to my TV? I think I have just a integrated Intel graphics card. It works fine in windows but I can't seem to get it to work in Ubuntu. I tried searching but couldn't find anything pertaining to this issue.
View 3 Replies
View Related
May 5, 2010
The default output audio port Ubuntu doesn't work on my system. It should be "Analog Mono Output/Amplifier", instead of "Analog Output/Amplifier". I can easily change that in sound preferences, just by choosing the right port in the "Output" tab. The problem is this would only apply to a single account, and I would like to change it system-wide, so it applies to all accounts on the system (I have more than 100 users...).
Update: I can achieve the same effect as I would by changing it in sound preferences using the following command: pacmd 'set-sink-port' 'alsa_output.pci-0000_00_1f.5.analog-stereo analog-output-mono;output-amplifier-on' Unfortunately that's still not system-wide,
View 2 Replies
View Related
Jul 14, 2010
Can i find sample program to record audio through microphone connected to PC.
View 9 Replies
View Related
Feb 15, 2010
I installed Kubuntu 9.10 one week earlier and installed VLC player in it. But from that day VLC player is playing the video but not the audio. Also Banshee player is not playing any audio in Kubuntu.
View 4 Replies
View Related
Jul 14, 2010
Have you ever wanted to record a sound heard from your computer or website? If yes outRec is perfect for you. This simple but powerful application let you to record your sound card audio output easily in a few steps and save it in different kinds of formats like wav, mp3 or ogg.
Download from [URL]
To get it work you need to install the dependencies with:
Code:
sudo apt-get install sox gambas2-runtime lame mplayer libnotify-bin libmp3lame0 gambas2-gb-form gambas2-gb-desktop gambas2-gb-gui libtwolame0
View 1 Replies
View Related
Oct 12, 2010
Ubuntu insists on using movie player as the default for audio files. I would like to use VLC. VLC doesn't show up on the list as preferred applications for multimedia. I tried using custom with vlc %u but it doesn't work.
View 3 Replies
View Related
Feb 28, 2010
I am attempting to connect a bluetooth headset to a Telex Intercom System. I can connect my bluetooth headset to Ubuntu and use the microphone and the speaker perfectly. There are no problems with the Line-In or the Line-Out.
Is there any way to connect the BT-Microphone to the Line-Out while connecting the Line-In to the BT-Speaker?
View 1 Replies
View Related
Jul 23, 2011
I am using Ubuntu 10.04 LTS - the Lucid Lynx. I am using the laptop to play video files and view it on TV using HDMI output. No problems. Requirement: to play simultaneously a different media file and be able to listen through say headphone / laptop speakers. While a movie audio is only heard on TV, other audio is heard only on laptop speaker.
View 7 Replies
View Related
Jun 10, 2011
I have a StarTech USB audio adapter which I have been unable to get output from in Suse. Pavucontrol allows me to adjust the output to this device, and even shows some signal when playing media. However, no output makes it to the headset/speaker jack of the USB device. There does not appear to be any issues with playing media to the internal sound card & speakers of the computer. I booted up a Live Ubuntu disk, the device was recognized, and output made it with no problem. This leads me to discount a hardware problem. I'm running Suse 11.4 on a Lenovo Thinkpad T420s.
View 9 Replies
View Related
Jan 22, 2010
I currently have my desktop setup with two displays, one of them being my living room tv that I run Boxee on. My problem is that all the audio runs through the same speakers preventing me from listening to music or gaming at the same time as when Boxee is in use.
I would like to know if it's possible to split the audio so that an application of my choosing only outputs sound through my headphones. I was thinking it would be possible with some of the controls in pulse, but if it is I cannot figure it out.
View 2 Replies
View Related
Sep 24, 2010
My friend has following configuration
Pentium 4 2.4 Ghz
256 MB DDR RAM
Western Digital WD1600AVJS-63WNA0 hard disk
PM8M-VHMS7104 VER 3.0 motherboard
The motherboard has Realtek sound card built in but there is no sound output. He is using Ubuntu 9.10.
View 2 Replies
View Related
Oct 29, 2010
Is it possible to convert a 2.1 channel mp3 or any video file to get a respective 5.1 file permanently so I could play them on external music system which is 5.1 speaker system. Any sites where i can usually songs n video with 5.1 channel.
View 2 Replies
View Related
Jul 25, 2011
I am interested in finding out the best way to get my audio to work from HDMI through my NVIDIA card.
[code]....
I don't get an option for HDMI. Here is the interesting part. The sounds work sometimes but not all the times. Most of the time the sound works on the OS default sounds but wont work for movies, streaming and music. I am running pulseaudio. I am new to setting this audio up. The headphones work fine.
View 1 Replies
View Related
Mar 21, 2011
I can't find any S/PDIF audio output options in System --> Preferences --> Sound. How do I enable S/PDIF audio output from my onboard audio?
View 4 Replies
View Related
Jan 2, 2011
I bought new laptop (VOSTRO 1015) with defalut ubuntu 8.1 linux OS. i need to instal latest ubuntu version, is it possible to override old version with new version if i can over ride old version is there any problems with my laptop.When i palyed MP3 and Videos in movie player one pop message was displayed codec are not available , ubuntu version is out dated.i need to instal latest ubuntu with audio and video drivers
View 2 Replies
View Related
Jan 6, 2010
script which adjusts my NVIDIA settings to HDMI and also my Audio output to my digital output. I feel its quite a lot of clicking to get my signal to my LCD.So I hope somebody already had this idea and can give me the script or can assist me in writing it myself. I think its not a complicated script. i guess its only 2 lines. But i am not exactly a pro in Ubuntu..So as i said i have a NVIDIA graphic cardand aplay -l shows
**** List of PLAYBACK Hardware Devices ****
card 0: Intel [HDA Intel], device 0: ALC1200 Analog [ALC1200 Analog]
Subdevices: 1/1
[code]...
View 1 Replies
View Related
Mar 4, 2010
I have Ubuntu 9.10 installed but the sound is way below normal..
Pulse-audio just doesn't give enough output..
Max output is just average...
I have a 945 Intel chipset..
View 1 Replies
View Related
Feb 13, 2011
I am currently trying to start doing some screen casting and having a problem with audio recording in gtk-recordmydesktop. The problem is that I need to record both; my computers audio card output, and my mic input at the same time. As of now I am able to record one or the other.
View 4 Replies
View Related
Apr 25, 2011
When I go into Sound Preferences I can crank up the output volume above 100%, making it audible from my monitor's built in speakers.
(this is for a kiosk that doesn't have room for extra powered speakers) Every time I reboot it resets output volume to 100%. Is there a way to change the volume back to 125% or whatever max is so the general public can hear the video that is played after a reboot? (this is to be a permanent installation that won't even have a keyboard or mouse attached, so automating this is a must)
View 2 Replies
View Related
