I'm using Ubuntu 9.10 64-bit with a GTS 250. After installing the restricted driver from NVIDIA's website I get stuck at a 640x320 resolution. The only other option I get is 320x240. The resolution I need is 1680x1050.
I've also encountered this problem with a 9600GT.
I am stuck at 1024x768 in Ubuntu 10.04 with the nVidia GeForce 7100. I installed the drivers suggested by nVidia on their website, but it doesn't seem to heighten my resolution any. 1024x768 is the highest which appears in nVidia X Server Settings.
Xorg.conf:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 256.53 (buildmeister@builder101) Fri Aug 27 21:34:01 PDT 2010
Section "ServerLayout"
Identifier "Default Layout"
Screen "Default Screen" 0 0
InputDevice "Configured Keyboard" "CoreKeyboard"
[Code]...
Is there a way to fix this without having to buy a new card? I've read that the GeForce 7100 is pretty crappy, but I've got no money to space at the moment.
I currently have an nvidia 8600 gts w/nvidia restricted drivers and I cannot seem to change the resolution to anything higher than 640x480. Everything used to work perfectly w/the restricted drivers however I downloaded an update and it screwed everything up.
I have tried to edit my xorg.conf file but it seems that either i'm doing something wrong or the nvidia drivers are simply ignoring that file. I tried reverting back to the older versions of the drivers and that didnt seem to work. I tried installing the newest version of the nvidia drivers and that didnt work either. below is my xorg.conf file
[Code]...
I have a BIG issue with my fresh Maverick install : when I install proprietary drivers via the graphic utility, either one proposed, the screen resolution is then max in 640x480. But I have hardware acceleration and compiz effects !
I tried, I think, everything. Forcing the resolution in xorg, in monitors.xml, try the newest ones via the ppa, install an older (and used to be working I'm positive) one with .run (which just prevent any graphic display).
I installed 10.04 on my former windows box last night, and I seem to be stuck at a screen resolution of 1024x768. I have a Geforce 7600 GT graphics card, and I installed current drivers via the hardware drivers option. I can't go above this resolution in the nvidia x-server settings, and even xrandr says the highest resolution I can use is 1024x768. What is up with that, and how can I change it?
View 1 Replies View RelatedI am a first time user and recently installed 9.10 from a LiveCd then immediately upgraded to 10.04 LTS. I had no black screen problem, but my resolution is stuck at 640x480 with no other options. I upgraded my driver to NVIDIA-Linux-x86_64-195.36.31 and the resolution remains the same. I have a Geforce GTS 250 and an Acer H233H capable of 1920x1080_75.
My XFile:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder62) Thu Jun 3 09:41:37 PDT 2010
# xorg.conf (X.Org X Window System server configuration file)
# This file was generated by dexconf, the Debian X Configuration tool, using values from the debconf database.
# Edit this file with caution, and see the xorg.conf manual page.
# (Type "man xorg.conf" at the shell prompt.)
# This file is automatically updated on xserver-xorg package upgrades *only* if it has not been modified since the last upgrade of the xserver-xorg package .....
I have tried entering a CVT generated modeline to the xorg file but it did nothing.
I have just installed Ubuntu 9.10 Karmic on my HTPC, and it detected my TV (connected via DVI, so is a monitor effectively) OK, and displayed the proper resolution of 1360 x 768. I want to use the proper nVidia drivers which I've enabled using the restricted drivers tool in Ubuntu. On doing this, it has set the resolution to 640 x 480, and the nVidia configuration tool will not let me set it any higher.
1. The contents of xorg.conf are now irrelevant as of the last few versions of X?
2. The nVidia software is not reading the EDID information from my TV properly?
i updated my nvidia driver im running ultimate gamers edition 2.6 and now it only boots as far as terminal 1. i am a newbie and am completely lost. of course i have searched google high and low and seems to be a common problem however i have tried editing the xconf/xorg cnt remeber the name iv tried using the restore mode which is second on the boot list and have tried using the live cd to boot into graphics mode none seem to do the trick through using the live cd or something as the commands for the terminal are a pain for me also i would put up the xconf file up but i only no how to view it through the cd i dnt no how to copy it to usb to place on here
View 5 Replies View RelatedI just bought a new 24inch monitor that supports the resolution 1920x1200. Unfortunately, the nvidia-settings dialog does not have this resolution as an option (currently running on 1920x1080). The graphics card is Geforce 6200 (should support the wanted resolution), and the monitor is connected with the VGA cable (if that matters).
View 7 Replies View RelatedSince I upgraded to 9.04 a while back I have had this annoying screen resolution issue. Every time I log into my Ubuntu system the screen resolution defaults to 1280x1024. My preferred desktop resolution is normally set at 1680x1050. So each time I log in I have to open the Nvidia control panel and manually set the screen resolution to 1680x1050. Even after logging out it will still go right back to 1280x1024 when I log back in.
But the funny this is I am almost positive the login screen resolution is 1680x1050 because the picture is crisp unlike the blurry and distorted picture at 1028x1024. I have tried everything from manually editing the x.org conf file to running the Nvidia control panel as root. Nothing saves my preferred resolution of 1680x1050. My Nvidia driver is version 190.42 and Ubuntu version is 9.04. The monitor is an ASUS VW192T+ which is detected by the Nvidia driver.
Ubuntu 10.04, nVidia GeForce 9400, driver ver 195.36.15.When I log in, the system always comes up in 800x600 mode. I went into the NVIDIA X Server Settings page and changed it to my preferred setting of 1152x864. I hit Apply, then Save to X Configuration File (with correct root password).All is well until restarting. Then it reverts back. The update doesn't stick. How can I make this the permenant setting?
View 3 Replies View RelatedI'm a first timer on Ubuntu and I have a little problem with my Nvidia graphic card. After lots of attempts I can't get the 1280x1024 resolution that both of my monitors have. Instead I'm running on 1024x768.Is this a way to fix it?
View 8 Replies View RelatedRecently I encountered a problem with a triple-monitor setup where the EDID was rejected by the nvidia driver (version 195.36.0, claiming that the EDID checksum was invalid. The maximum resolution that the driver would allow was 640x480. Searching through the X logs (/var/log/Xorg.0.log), I found the following message:
Code:
(WW) Jul 26 21:37:57 NVIDIA(GPU-0): The EDID read for display device DFP-0 is invalid: the
(WW) Jul 26 21:37:57 NVIDIA(GPU-0): checksum for EDID version 1 extension is invalid.
[Code].....
Running Ubuntu 10.04 with an Acer wide monitor, 1600x900. The graphics card is a Gefoce 6200. When I run nvidia-settings I can select 1600-900 and it looks fine. I can "Save to X configuration file" and get no errors. However if I log out and back in, the resolution changes to 1360x768 which causes the tool bar at the top to be mostly somewhere to the left of and above the monitor. It makes life rather difficult when you can't get to the Applications and Places menus. I also tried nvidia-configure but it created essentially the same xorg.conf file.
This is the xorg.conf file generated:
Quote:
# nvidia-xconfig: X configuration file generated by nvidia-xconfig
# nvidia-xconfig: version 1.0 (buildmeister@builder75) Sun Nov 8 21:50:38 PST 2009
# nvidia-settings: X configuration file generated by nvidia-settings
# nvidia-settings: version 1.0 (buildd@palmer) Fri Apr 9 10:35:18 UTC 2010
[Code]....
1600x900 is the native mode of this monitor so the driver shouldn't be getting any errors if it trys to set that resolution.
in my media pc i have a geforce 8400, attached to a 32" 720p lcd using a dvi to vga adapter, and it is miss detecting the resolution it detects the resolution as 1080p, so when i try to enable full gpu scaling it gets the resolution wrong resulting no image on the screen. how do i manualy set the "back end resolution"
View 6 Replies View RelatedI know there are a lot of threads out there for same or similar issues, but nothing I found was working for me until, by sheer chance, I found this very simple solution on the Fedora forums. Too elegant not to share.Environment:Ubuntu 10.10nVidia GeForce 5500Samsung SyncMaster 225BWUsing DVI cable (in case it matters)Issue:After installing the proprietary nVidia drivers, the screen resolution was no longer the correct native resolution of the display. In my case specifically, the nVidia X Server Settings utility was detecting the maximum supported screen resolution was 1280x1024 while my display's native resolution is 1680x1050.Solution:Open a Terminal window.Make a backup copy of the original xorg.conf file. This is just good form any time you are making config file customizations.
Code:
sudo cp -p /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
Open 'xorg.conf' in a text editor.
[code]....
Having been using squeeze on my primary system for some time, I decided to install it on my media center PC. After doing a clean install I lost sound (another post) and my maximum video resolution dropped to 1280x1024. I was previously getting 1920x1080 (native) resolution under lenny on this box. So it's a mystery to me why I'm not getting that now. As you can see, the nvidia module is loaded:
# lsmod | grep nvidia
nvidia 9821382 0
i2c_core 12570 2 i2c_piix4,nvidia
PS--This was installed the "debian way" via module assistant.
I recently purchased a cheap computer to use for everyday tasks. It came pre-loaded with Windows 7. The monitor I am using is a Vizio VX20L. It's native resolution is 1366X768. I have no problem with the screen resolution in Windows 7 but in Ubuntu, I am having some issues. I have the propriatary Nvidia driver installed in Ubuntu but for some reason I cannot get the screen resolution right. I am currently using a resolution of 1360x768 and the right part of my desktop is not on the screen.
I have tried to adjust the screen size using the monitor settings, but I still cannot get the whole screen to show up. If I set the resolution to Auto in the NVIDIA X Server Settings, it defaults to 1280X1024 and I can see my whole desktop, but it is streeeeetched. Here is some relevant information pertaining to my system:
I'm using Ubuntu 10.04
Integrated Video chip is NVIDIA GeForce 6150SE
The driver I'm using is NVIDIA accelerated graphic driver (version current)[Recommended]
screen is a Vizio VX20LHD
Unable to get high res, colour or 3-D acceleration working with 8.04 Hardy. Not a hardware problem as it works perfectly in dual-boot XP.
[Code]...
After closing some game my display resolution turned into 640x480 so I tried to modify xorg.conf to the following but I noticed that there are disappeared sides (at right & left) in my monitor and fonts appear small and ugly! How can I fix this issue?
[Code]...
I have installed the restricted driver, but I am stuck without a 1280x1024 video mode for any of my monitors.(Have tried 2) nvidia-settings doesn't want me to go above 1360x768, which is very strange.How do I get this thing running my optimal 1280x1024?
View 9 Replies View RelatedIt started when I first installed Ubuntu because I heard it was good and I felt like a change of OS, but it didn't recognise my monitor and because of that it was stuck at the resolution 800x600 (I think) and so it didn't quite look right, also it made going on the Internet really awkward, so I searched on the internet to find out how to fix it and I couldn't find anything that worked, so instead I installed Ubuntu netbook version thinking that it would recognise it because it is meant for laptops, so I put the ISO on a USB and it installed but if I tried to do it again it just tried to reinstall itself (I think it was just because I didn't delete the other Ubuntu) and so I just stopped using the USB, so I eventually gave up and tried to delete linux.
I used the Wubi installer for the original Linux so I used that (in the C drive in the Ubuntu folder) to uninstall it too which looked like it uninstalled it fine, I then made the stupid mistake of using EASUS (I think, I cant check anymore) Partition editor and deleted all of the linux sections and made the C drive bigger, after it finished that my laptop doesn't boot up and im stuck at a black screen with it saying to reboot and insert proper boot device. With it not booting I couldn't do anything, but then I remembered the USB and so I put that in and now it boots to Linux, but I really want my windows 7 back because this linux isn't even installed and wont install, the only way I can use it is by exiting the installer and then using the ubuntu that doesn't really look right and doesn't save anything I do. Is there anyway to get my windows 7 back or am I stuck using this?
I am using Ubuntu 10.10. I am facing a problem with display resolution. My monitor is a 14" Samtron (56v) and with Ubuntu i am stuck with 800x600 resolution. I tried everything from 'xrandr' to 'sudo dpkg-reconfigure -phigh xserver-xorg' so that i can have 1024x768 resolution. But it seems that nothing is working out.
View 7 Replies View RelatedI have installed Lucid 64bit and everything is working OK except for my printer / scanner.
I have a Canon Pixma MP520 and when I switched it on and plugged it in Lucid identified it and installed the necessary drivers.
I have tried printing and scanning (scanning using Simple Scan and Xsane) but I can't get any more than 600 dpi resolution (my printer / scanner is capable of 4200 resolution).I have tried changing the resolution in the scanning packages but the resolution stays the same.
i Just installed ubuntu 9.10 on my Acer laptop im new to linux and dont know how to fix this, (the resolution is stuck) the graphics card of the laptop is an Intel HD graphics media accelerator or somthing and i have looked everywhere for the drivers intel only supply them for windows 7 im completely stuck
View 1 Replies View RelatedSo yesterday, I my power went out on my desktop and when I rebooted, the screen resolution was stuck at 640x480. When I go to the display settings, no other higher options are available. Any suggestions?
View 1 Replies View RelatedRecently when I rebooted the display resolution went to 800x600, where as before it was 1024x768. For some reason 1024x768 is no longer listed in (GNOME) System->Preferences->Moniters. Even after reinstalling Debian from scratch it's not there anymore. What can I do to fix this? System->Preferences->Moniters says Moniter: Unknown and stays that way even if I click Detect moniters.
# xrandr xrandr: Failed to get size of gamma for output default Screen 0: minimum 640 x 480, current 800 x 600, maximum 800 x 600 default connected 800x600+0+0 0mm x 0mm
[Code]....
My screen resolution is stuck at 800x600. I am using Fedora 11. The screen resolution used to go higher, but after a restart I have not been able to get it about 800x600. Below is a link to my smolt profile, [URL]This is my video driver Intel Corporation 82915G/GV/910GL Express Chipset Family Graphics Controller. It is an onboard card. I have installed a new graphics driver which did not help. The name of it is, i915Graphics.tar.gz. Keep in mind I installed the driver after F11 wouldn't allow me to increase the resolution from 800x600.
View 14 Replies View RelatedI just switched to opensuse a couple of days ago and I noticed that my resolution was stuck in 800x600. I went and downloaded the nvidia drivers and went to install the driver for my monitor through sax2. When I tried to add the monitor driver I would get out of range errors. I rebooted and can now set the resolution to 1680x1050 which is my max. However, when I go to test these new settings the resolution shown in the window is 1400x1050. GPU: Nvidia GeForce 9600 GTX Monitor: LG FLATRON L227WTG
View 9 Replies View RelatedI made a total reinstall of Slack 13.1 the other day and all went seemingly well. After a lot of experimenting and deciding I wanted the disk partitioned differently, a reinstall felt about right. But when I started X the resolution was all too low. xorg.conf was adjusted with the properties of my screen (GDM 4011P). Once upon a time, the Xorg config-tool would ask me my opinion, but now it flashes by and I have to live with what it comes up with.
The nVidia driver was installed (legacy for GeForce 3). I know the config is read, because it fails parsing if I have kHz with the sync-figures. But it otherwise disregard my wish to run at 1280x1024. In XFCE I can run the nVidia configuration tool, but it offers only auto, 320x240 or 640x480. The screen is too small for me to click "ok" on several occasions. The machine is capable of 64bit, 2GHz. But I installed the 32bit version of 13.1, it has 1,5GB RAM.