Debian Multimedia :: Incorrect Video Resolution In Squeeze NVIDIA?
Jun 21, 2010
Having been using squeeze on my primary system for some time, I decided to install it on my media center PC. After doing a clean install I lost sound (another post) and my maximum video resolution dropped to 1280x1024. I was previously getting 1920x1080 (native) resolution under lenny on this box. So it's a mystery to me why I'm not getting that now. As you can see, the nvidia module is loaded:
# lsmod | grep nvidia
nvidia 9821382 0
i2c_core 12570 2 i2c_piix4,nvidia
PS--This was installed the "debian way" via module assistant.
View 2 Replies
ADVERTISEMENT
Mar 25, 2011
I know there are a lot of threads out there for same or similar issues, but nothing I found was working for me until, by sheer chance, I found this very simple solution on the Fedora forums. Too elegant not to share.Environment:Ubuntu 10.10nVidia GeForce 5500Samsung SyncMaster 225BWUsing DVI cable (in case it matters)Issue:After installing the proprietary nVidia drivers, the screen resolution was no longer the correct native resolution of the display. In my case specifically, the nVidia X Server Settings utility was detecting the maximum supported screen resolution was 1280x1024 while my display's native resolution is 1680x1050.Solution:Open a Terminal window.Make a backup copy of the original xorg.conf file. This is just good form any time you are making config file customizations.
Code:
sudo cp -p /etc/X11/xorg.conf /etc/X11/xorg.conf_backup
Open 'xorg.conf' in a text editor.
[code]....
View 1 Replies
View Related
Jun 19, 2010
I have just installed ubuntu 10.04 32 bit on my girlfriend's computer. She has a NVIDIA GeForce2 MX/MX 400 video adapter and I am having trouble getting the restricted driver working. First I tried it by the books through the Restricted Drivers assistant under Administration. This was successful but on reboot both the boot screen and the desktop environment were at 640x480. No adjustment using the NVIDIA tools was possible. It said that the monitor was unknown. It is a Fujitsu Siemens D-19.1 monitor. I believe however the problem lies with the graphics adapter because I remember it being identified correctly at some point of the ordeal.
Next I followed a tutorial and removed all of my NVIDIA packages from the computer. I still have my graphical environment though. After downloading the appropriate (Newer version than that in the Ubuntu repo) driver from the NVIDIA website I entered
Quote:
It says that the installation has failed. I can supply log files of the failure.
View 2 Replies
View Related
Jun 18, 2011
I just set up my dad's pc with Debian Sqeeze. It runs perfectly fine and after trying a lot of distro's Debian is the only one that will not crash or freeze up X. Now we're forced to using my own 17" monitor instead of his 19" wide screen since the max res is 1280 x 1024 in Sqeeze. What he needs is 1360 x 768. I found out in the wiki that xorg.conf needs to be edited. Since the file does not exist it needs to be created by running "Xorg -configure" in tty after stopping GDM. when running the "Xorg -configure" command this is the output;
" vmware: Please ignore above "FATAL: Module vmwgfx bot found."
(++) Using config file: "/root/xorg.conf.new"
(==) Using system config directory "/usr/share/X11/xorg.conf.d"
Number of created screens does not match number of detected devices.
Configuration failed. "
It's an Intel Sandy Bridge integrated graphics chip. I've tried running "Xorg:1 -configure" as mentioned in a forum but that simply gives me a "unknown command" answer.
View 3 Replies
View Related
Oct 28, 2010
Does this latest nVidia driver (version 260.19.12) work with the default Linux kernel in Debian Squeeze? And does it require any additional packages before installation?
(I cannot test it myself, since it's my brother who recently bought a new nVidia card)
View 2 Replies
View Related
Oct 31, 2010
I run the 2.6.32-5-686 kernel on Squeeze and the bad nvidia drivers. A recent update, and pardon for not noting which, broke 3d games on my box.
From a terminal neverputt yields the following error:
ignatius@lapbox 14:56 [ ~ ]:$ neverputt
X Error of failed request: BadWindow (invalid Window parameter)
Major opcode of failed request: 137 (NV-GLX)
Minor opcode of failed request: 4 ()
Resource id in failed request: 0x2600013
[Code].....
I can mv xorg.conf to xorg.conf-pre and nexuiz will fire-up. Without 3d of course. I spent an hour or so last week going over my xorg.conf but it just ain't broke!
Someone else saw it, too, and reported it but his post remains alone in the thread as of 10 minutes ago. Anyone else seen this?
I don't play games much at all, but sometimes I just wanna frag muthafuckas and now I can't.
View 2 Replies
View Related
Feb 7, 2011
newly installed squeeze. Everything seems ok except microfon. How can I found out what is the problem?
[Code]...
View 2 Replies
View Related
Jun 21, 2011
It seems that I'm learning a bit about Debian in the last couple of days...
Here's the thing. I don't appear to be getting any 3D accelaration from my video card at the moment.
Having tried many things (which all failed) and making a mess of my computer I have done the following things:
1. Reinstalled Lenny from scratch.
2. Updated sources to point to stable and allowed update manager to do its thing.
I now appear to have a working build of squeeze.
X is up and running fine, but when I check /var/log/xorg it appears that I'm running the NOUVEAU driver, which does not support the 3D functionality of the card.
So... What is the best method for getting the appropriate driver installed?
My last attempt ended up with nvidia-glx fighting with xorg, so I'm hoping that someone will have up to date instructions that I can follow...
View 6 Replies
View Related
Oct 11, 2010
My problem is that I am trying to install nvidia drivers I got integrated card nvidia geforce 6100 nforce and amd x2x64 processor and also squeeze x64, so I downloaded the driver but when I try to top gnome I cant
/etc/init.d/gdm stop it says no such file or directory
So I google it and I found that squeeze has genome 3 so I put:
/etc/init.d/gdm3 stop
and it just appears a black screen just with a prompt but without any shell, I cant sign in debian or do anything it is just a black screen and i try ctrl+alt+f1, f12, f8, space and nothing, I can write but it doesn't response the only thing that I can do is press ctrl+alt+dell and it restart the PC. How can I stop gnome to install my drivers?
View 7 Replies
View Related
Oct 21, 2010
It was no surprise that I needed to reinstall the nvidia driver after a 2.6.32-5-686 kernel update a couple days ago, but I was surprised that it didn't work. I've had to drop back to a kernel I compiled a few weeks ago, which is basically the stock 2.6.32-5-686 from that time, with a timer frequency of 1000 and desktop preemption.
Vid card is GeForce PCX 5750
Using NVIDIA-Linux-x86-173.14.22-pkg1.run
This is the command I used:
env CC=/usr/bin/gcc-4.3 sh NVIDIA-Linux-x86-173.14.22-pkg1.run
(After it didn't work, I ran it with --uninstall and tried installing again. No luck with that.)
Here's the nvidia installer log (sorry about the encoding. I don't know what happened with that): [URL]
rivafb, nvidiafb and rivatv are not loaded.
I don't see it in this one, but on a previous attempt, I saw an error message that said no nvidia graphics card was found. I've been suspicious that the card is slowly dying, based on problems like gray blocks on the screen or (in an older lenny install) persistence of the contents of a window appearing inside a terminal, when I switch desktops from the one where the browser is open to the one where the terminal is open. Scrolling the artifact off-screen and back, or window-shading the terminal and then un-shading it causes it to re-draw correctly.
View 2 Replies
View Related
May 14, 2011
This system is basically working fine, but I'd like to change the video resolution. It has defaulted to the monitor's native resolution, which is 1920 x 1024. I'd like to set 1600 x 900. However, it's not in the list. In fact, the other resolutions listed in System => Preferences => Monitors aren't even the same ratio -they're more like the old 4:3.
Background: desktop pc with AMD64, 4GB RAM, etc.video is Nvidia Geforce 8200 or 8400installed debian 6.0 with the default "base" or "basic" or somesuch, plus "graphical environment". It's Gnome 2-series I believe.And it seems to be using the Nouveau driver as far as I can tell.So I Googled, and on various pages people said to edit the file: etc/X11/xorg.conf
However, there is no such file on my system. So I googled more, and posters give the following advice: kill the X server, kill the gdm, and then give command: Xorg -configure and this is supposed to generate the config file. However, for me it did not generate the file. Instead it failed with the error message: "Number of created screens does not match number of detected devices".
View 2 Replies
View Related
Mar 1, 2011
I have recently swapped over to debian (KDE 32bit) from linux mint, however vlc only plays audio, no video (This is for .avi's, .wmv's and rtsp streams, probably others but that what i have available to try). I've installed debian multimedia and dragon player will play .avi's fine, though crashes with .wmv's .
Output if i start play a video vlc through terminal
VLC media player 1.1.3 The Luggage (revision exported)
Blocked: call to unsetenv("DBUS_ACTIVATION_ADDRESS")
[code]....
View 9 Replies
View Related
Jul 5, 2011
I recently ran the update manager on my Ubuntu 11.04 box then shutdown and went to bed. When I booted the pc back up the next day my resolution is stuck at 1024x768 when I normally run at 1366x768.
I'm using the default open source drivers since the AMD ones are useless with my hardware (specs in the signature) I've tried changing the resolution through the "monitors" GUI and directly through xrandr.
xrandr output:
Code:
Screen 0: minimum 320 x 200, current 1024 x 768, maximum 8192 x 8192
DisplayPort-0 disconnected (normal left inverted right x axis y axis)
HDMI-0 disconnected (normal left inverted right x axis y axis)
[Code]...
View 9 Replies
View Related
Feb 23, 2011
Fresh install of Debian 6.0 (squeeze) and the memory shows 3.8 GB. I have 6 sticks of 2 gb on the board.
Pertinent dmesg lines: AMI BIOS detected: BIOS may corrupt low RAM, working around it.
3083MB HIGHMEM available.
883MB LOWMEM available.
Bios tests 12 gb of ram fine.
View 4 Replies
View Related
Jun 16, 2010
After a fresh custom install of Squeeze I could not play any video. debian-multimedia.org repository is in my sources.list. Trying to play an AVI video with totem I get the message
[code]...
View 14 Replies
View Related
Jun 9, 2011
Using online Debian guide, installed latest nvidia-current, glx etc which seems to be 195.xx Machine boots to GUI but monitor setting menu doesnt respond nor is there an nvidia specific one. xorg.conf shows 'nvidia' driver but I suspect I am still on 'nouveau' since the synapatic package manager doesn't show an nvidia xserver-xorg-video choice.
Second question, any trailheads for using wheezy based drivers (i.e. nvidia's latest 270.xx) with squeeze?
View 14 Replies
View Related
Jan 16, 2010
I'm having a real fight with an Nvidia 6100 video under 11.2. I cannot get anything besides 1024x768 or 800x600 resolution with any technique besides doing an upgrade installation over an existing 11.1 system. I want 1440x900 for this wide screen LCD and that works with the upgrade install but that gets me into other problems with versions and other stuff - not a desireable choice.
OK. I know that the Nvidia driver (190.53) works as all is well under the upgrade. When I do a totally clean installation or a clean install with the existing /home I get a default 1024x768. If I use sax2 to try and change it one of two things happens: the change is ignored or I drop to 800x600 and the ball game is over: I'm stuck there, period. Other than a couple of commented-out lines, xorg.conf is the same as it was or 11.1 (and back to 10.1 after allowing for version changes) after running sax2 but even nvidia-settings won't give anything beyond 1024x768 if I try and use that.
I've been through the how-to stuff and back messages here but I'll be darned if I can force the desired 1440x900. I had a similar issue with 10.2 or so where the only way to get it right the first time was to set the desired resolution to 1440x900 during the hardware setup during the installation but that seems to have disappeared along with xorg.conf which only appears after running sax2. I can't even use the manual diting tricks in xorg.conf I've had to use with some cards - it seems to be completely ignored and I can't see any real problem with it anyway once sax2 builds it. On a couple of machines with later version of the Nvidia video everything is working as expected, at least with GF 6800 and higher video.
View 2 Replies
View Related
Apr 19, 2010
New pooter, just installed SuSE 11.1. Would appreciate some insight into which Nvidia driver is right for my system, and what is the maximum resolution I can use without potentially causing any damage (if that's even a real concern).Here are the specifics.
[Code]...
So, now the questions.
a) Should I leave both sets of drivers installed, or should I delete one of them?
b) If delete, which should be taken off?
c) If neither of these drivers is the right one, which do you suggest I get instead?
d) I currently have the resolution set at 1920X1440. Is there any reason to worry that I might be overdriving anything and potentially causing damage to the system?
View 9 Replies
View Related
Apr 11, 2011
I reinstalled my computer with Ubuntu 10.10 and the resolution was fine. I turned off my computer last night and when I turned it on today it's back to everything being huge and the screen resolution being 640 x 480. Then when I try to change it, it says my video card isn't supported. All I want to do is revert back to my stock video card in my computer and remove the nvidia one since obviously ubuntu isn't working with it.
View 9 Replies
View Related
Apr 11, 2011
I am setting up a MythTV environment to switch from Windows based MediaPortal (with a high number of disturbing bugs). Yet, I have three difficulties, which I want to discuss with you. They are:
- No audio via HDMI see [URL]
- Video resolution seems to change during video playback
- Channels cannot be found via DVB-S [URL]
As you can see, I have created three posts to keep discussions focused.
Alltogether I have the following setup:
- AMD 5050e CPU
- 8 GByte RAM
- Biostar TA890GXE
- Samsung LE40M86BD, connected via HDMI (and only HDMI)
- Mythbuntu 10.10 with proprietary drivers installed
- Technisat Skystar HD2 DVB-S card (two times)
Now, here is the problem:
Whenever I playback any video material using e.g. VLC, the screen resolution changes. This also applies when playback the video in a window and not fullscreen. The problem is that whenever the screen resolution changes, short time later the TV set blanks screen and show the TV set specific information "unsupported video mode".
How can I enforce to stay in the configured video mode?
View 2 Replies
View Related
May 3, 2010
I have an old video card, Nvidia XFX 7800GT, which is now beginning to fail and I need to upgrade. I am not huge a gamer but I do play/buy games on regular basis. Right now I'm playing Eternal Lands on the Linux side. Looking to spend $100-$150 on a new card.I have a Core2Duo Wolfdale 3.0, with 2ghz ram and run Lucid 32bit. Also run windows Vista64Ultimate on dual boot (rarely).
I would love to buy a new ATI 5770 or 5830, ATI budget cards seem to be much better for the buck over budget Nvidia cards, but I'm concerned with ATI drivers and long term with Ubuntu.On the Nvidia side I'm considering the GTS 250. The only advantage I can find is lower power consumption with Nvidia and Ubuntu has always preferred Nvidia over ATI, as far as working drivers go.As Far as Ubuntu and Lucid is concerned, which way is best, ATI or Nvidia? Has anything changed with ATI support, that could make theor cards more compatible now and in the future?
View 9 Replies
View Related
Dec 31, 2010
On my desktop with Squeeze the resolution is all different when I booted up this morning. It used to be something like 1680 x 1050 and now the highest available under system > preferences > monitors is 1360 x 768. I don't believe I have had any xorg.conf file on here since installation. There were a fair number of updates yesterday but I can't figure out what the source of this might be. My system is multiboot, though nothing but Squeeze has been booted for months.
I checked a different old linux distribution and it had the same problem but with even lower resolution. It shares the same home partition which has Gnome settings on it. Then I checked the w vista boot and even it had a similar problem of low resolution, though I was able to fix it by hand, selecting the higher resolution. So I can't figure out if the source of this problem is hardware, software, or what. I've checked all the connections and they seem tight.
View 4 Replies
View Related
Sep 2, 2011
I have installed debian squeeze with XFCE following this tutorial:It worked well, but I have one problem: the resolution is not right. How could I change it?The only resolutions that are available right now are 1280x1024, 1024x768, 800x600, 640x780. I have a 19" wide screen, so the resolution should be 1440x900. I couldn't find xorg.conf since it seems new xorg doesn't need it anymore.
View 9 Replies
View Related
Nov 9, 2010
I installed Debian Squeeze with no issues. I went to install latest Nvidia driver as done previously with Lenny. Used instructions that worked on lenny from "the trooper" [url]
Downloaded th latest driver for my GeForce 7300 GS vidio card, driver package NVIDIA-Linux-x86-260.19.12.run
Used "method # 2 as described in HOW TO,as it worked perfectly in the past on Lenny. Only syntax I changed was instead of gdm I typed gdm3 as it appears that is the new name for gnome in Squeeze.
Did as folows:
Now the trouble showed up, Unfortunatly I can only go off my memory. A question was asked stating that something did not match, it needed a 3 and the driver had a 4 version or somethng of this sort. then it asked if I new what I was doing (and I lied) and selected yes. And whammo, it didn't work. (This question was asked when i did in Lenny and it is working perfectly still on that system). I now can not boot to GUI, I notice when system boots it starts in "S" mode although I select normal boot from grub2.
Not too bad if I got to reinstall as little is on the system. I just want to know what I am missing on the instalation deal or should I be going about this difrently with Squeeze.
View 14 Replies
View Related
Jan 20, 2011
hHey i recently installed Debian Squeeze 64bit over my Ubuntu & Windows, i got everything installed and running including all programs i need without a single problem The one thing i havent been able to do yet is install the Nvidia Driver for Geforce 8800gt, ive searched a few sites but one site is telling you to do this way and the the is telling you to do it another way then people are saying about having errors when xorg updates and stuff.
So i was wanting to know whats the easiest and best way to install the Nvidia Driver package (from nvidia website) onto Squeeze 64bit, i've done it on lenny but cant remember ow
If i get this working then il probaly use Debian as my main OS from now on.
View 14 Replies
View Related
Feb 26, 2010
I'm using Ubuntu 9.10 64-bit with a GTS 250. After installing the restricted driver from NVIDIA's website I get stuck at a 640x320 resolution. The only other option I get is 320x240. The resolution I need is 1680x1050.
I've also encountered this problem with a 9600GT.
View 2 Replies
View Related
Nov 24, 2010
I have installed in squeeze following some directions the nvidia restricted driver from the unstable repos.
everything worked fine, except that the applied resolution is not kept after every restart or login
View 10 Replies
View Related
Mar 5, 2011
I installed Debian Squeeze (choosing no when prompted to add support for non-free or contrib sources) and noticed that the fan of my Nvidia 9600 GT video card is constantly running at full speed. I thought this meant that the default driver is not properly working. I would like to configure my system so that the video card fan is not being pushed so hard.
I downloaded the latest Nvidia (propietary) driver, stopped gdm3, and ran the driver installer. The installer failed because it said the Nouveau kernel driver was currently in use and incompatible with the Nvidia driver. I chose not to allow the installer to update my modprobe configuration directory. nvidia-installer log file '/var/log/nvidia-installer.log'
[Code]...
It looks at though the xorg.conf.new file has the nv driver in use, but the Nvidia installer says the Nouveau driver is being used. I ran a line in terminal (i forget the exact line) to test the xorg.conf.new file in the /root/ directory. The result was No Screens Found.
Next, I tried to remove the xserver-xorg-video-nouveau package using aptitude, but it displayed a message indicating that xserver-xorg-video-all depends on it. I decided not to remove the xserver-xorg-nouveau package. Any suggestions on how to proceed in order to configure X with a free driver (nv, vesa, or nouveau) so that the video card is handled properly?
View 1 Replies
View Related
Feb 13, 2010
Does anyone know when or if the nvidia legacy drivers are going into Squeeze? I tried the ones in the Sid repos but ran into unresolvable dependencies. Lots of people were telling me that testing works just fine so I've been trying it out, but to be honest I've run into quite a few problems of this nature. I admit that I'm running a real Rube Goldberg mix of older and newer hardware on this box, but I wouldn't think it would be this much of a problem.
View 4 Replies
View Related
Feb 5, 2011
I just bought a new 24inch monitor that supports the resolution 1920x1200. Unfortunately, the nvidia-settings dialog does not have this resolution as an option (currently running on 1920x1080). The graphics card is Geforce 6200 (should support the wanted resolution), and the monitor is connected with the VGA cable (if that matters).
View 7 Replies
View Related
