Ubuntu :: Lucid Freezes On Boot During Purple Loading Screen

Jun 29, 2010

When I try booting my computer under Ubuntu, it freezes whenever it gets to the part of the purple loading screen (with the Ubuntu logo and the red/white dots indicator). I won't load any further, but I can still turn it off by pressing the power button. Has someone else got this problem? Ubuntu was my main partition, and I don't have any practical way to make a hard install.

View 3 Replies


ADVERTISEMENT

Ubuntu :: System Freezes At Purple Screen On Boot

Jul 17, 2011

Every once in a while when I turn on my computer it freezes on the purple screen after the screen where you choose the operating system. When this happens the keyboard doesn't work and I have to hold the power button. Also I think this might be connected to the problem I had when I was running ubuntu from the live cd, which was freezing after choosing the option of "trying" the OS before installing. I'm using an HP Dv7-3112sa and am running the default 64bit ubuntu from the website.

View 6 Replies View Related

Ubuntu Installation :: Nvidia 9300M GS - Purple Screen (loading Screen) With 4 Dots

Oct 25, 2010

I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.

But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:

Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710

View 2 Replies View Related

Ubuntu :: Log In Screen - Blinks Off To The Purple - Freezes

Oct 7, 2010

I downloaded the latest LTS last evening , placed it along side my Win 7 , things went well seemingly until I got the install done and restarted the pc. From the initial purple log in area, the second I curse to the place to put my pw the screen blinks off to the purple screen, devoid of the login section and freezes, taking my mouse control away and then it just sticks. I have restarted quite a few times with the same issue. Is there a known issue about Win7 and the latest LTS concerning the log in screen?
if so, what would I need to do to correct, do I need to jump backwards to an earlier version and wait for the issues to be corrected? Is that even possible?

View 1 Replies View Related

Ubuntu :: Purple Screen And Freezes On Bootup After Install

Nov 25, 2010

I installed lubuntu 10.10 on my old computer (pentium II, 192 mb ram) but when i try to boot it passes the purple screen and feezes just after showing:

* Starting AppArmor profiles [OK]
* Starting NTP server ntpd [OK]

It was installed on From liveusb with the harddrive plugged into another computer cus the old ones bios doesnt support usb boot.

View 4 Replies View Related

Ubuntu :: Lucid: Purple Screen After Logging On?

Jun 3, 2010

I upgraded from 9.10 to 10.04 2 weeks ago. After a day or so I suddenly couldn't logon anymore. The pc boots, I get the userlist and can enter my username and password, then the userchooser dissappears but the background stays purple and nothing happens anymore. I can still move the mouse and switch to text console but I don't get my desktop. This happens for any user even a new user I created from the command line just to test this. In the end I assumed I messed something up during the upgrade and reinstalled the pc from scratch using Ubuntu 10.04 32-bit.

I was happy for almost 2 weeks but now suddenly I get exactly the same problem. No matter which user account I try I just can't logon (graphically) anymore. Rebooting the system doesn't help. When I run top on a text console I don't see anything hogging the cpu. There is nothing obvious blocking anything. I can't find any clue in /var/log/* or ~/.xsession-errors. I can logon still in text mode as a regular user, my homedir is there, everything looks ok. 1 thing I did notice is that a (few) boots before this started happening autofs suddenly didn't start anymore at boot time (my homedir is mounted from a NAS via NFS). I had to manually start autofs as root to be able to get to my homedir. However this seems to be ok now, automount is running and my homedirs are available. I tried making a new user with a local account just to rule out network issues but even this user can't logon. So the automount issue may be totally unrelated.

View 1 Replies View Related

Ubuntu Installation :: Lucid Upgrade - Purple Screen Of DEATH?

May 1, 2010

i feel like i should be on the payroll if I have to work so hard and long to get these things working. (ranting stopped, for now) I have ATI Mobility Radeon HD 4330 GPU in my Dell Zino system and finished the upgrade from 9.10 to 10.04 LTS and got the purple screen of death. tried the intel recommended fixes but got nothing. I cant even get into recovery mode.

View 3 Replies View Related

Ubuntu Installation :: Lucid Purple Screen Blocks Recovery Mode?

Jun 12, 2010

I have a problem, so I boot in recovery mode. The Recovery Mode menu comes up, but when I press a cursor key, the purple Ubuntu screen comes up. I cannot get to the menu items that I need!

The recovery mode is supposed to provide a failsafe text-only environment.

Does anyone know what app puts up the purple screen?

I would really like to remove it. I tried to install xdm, which I prefer, but keep running into the purple screen. - With XDM installed, the purple screen comes up and blocks you from seeing anything. Fortunately, remote login by RDP still works. - If you switch console (CTRL+ALT+Fn) back and forth a few times, the purple screen appears again. You have to go to a new console (F8 or even F9 instead of F7) and begin a new Gnome session. Eventually you run out of function keys...

Perhaps I'm using the wrong distribution. Ubuntu is friendly, but you pretty much have to use it exactly as it installs. Can someone recommend a distribution that puts more emphasis on stability?

View 1 Replies View Related

Ubuntu Installation :: Can't Boot 10.04 Disc - Boots To A Purple Screen Then It Goes To A Black Screen With A Load Of Writing Nothing Else Happens After Screen

May 12, 2010

I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?

View 1 Replies View Related

Ubuntu Installation :: Lucid (monitor Switches To Standby) - Screen Goes Black With A Flashing Cursor Then Changes Back To Purple

May 5, 2010

I cannot install Ubuntu 10.04, or even boot into the live CD. I'm not an expert, but I've used Ubuntu for several years, and I'm pretty sure I'm not doing anything stupid... Here's what happens when I boot with the Ubuntu 10.04 live CD: I get a purple screen with just an accessibility(?) symbol at the bottom (this lasts 15 seconds). The screen goes black, with a flashing cursor, then changes back to purple, this time with an Ubuntu logo, with 5 dots acting as a progress indicator (this lasts about 1 minute). The screen switches to standby. The CD drive continues to make noises for another minute or so, then stops.

I physically removed my graphics card (ATI Radeon HD 5770), and plugged the monitor straight into the VGA port on the motherboard. Now the CD boots up fine. I could try installing Ubuntu at this point, while my graphics card is unplugged, and then plug my graphics card back in, and see if it starts working then.

View 9 Replies View Related

Ubuntu Installation :: Can't Boot From Cd \ Purple Screen With A Couple Symbols At The Bottom, And Then The Screen Goes Black?

May 27, 2011

'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens

View 4 Replies View Related

Ubuntu :: Purple Screen / Flashing Dot Boot

Apr 3, 2011

when I install them all goes well but when I get into the GUIs I can hardly press anything - major bug with mouse and it is really annoying. Secondly there is a big gap between the GUI and my screen's edge. Hmm, I think - it must be a problem with the GPU driver and that might be the thing also messing with the mouse clicks. I download the drivers provided by the Ubuntu community - all goes well and I restart - stuck at purple screen after the "moving dots" on boot. So I reinstall the whole OS and try with the drivers provided by NVIDIA - same thing. I try the same procedure with Kubuntu and no progress.

View 2 Replies View Related

Ubuntu :: 10.10 Freezes At Splash Screen Upon Loading?

Dec 21, 2010

I was not able to install any version of Ubuntu. Everytime when the splash screen would appear, the computer would freeze and no hard drive activity would be present. The only way was to use the alternate install version of Ubuntu 10.10. Though, the splash screen problem persists. After the Ubuntu boot screen disappears, the splash screen appears with the coursor. About 3 seconds later it becomes unresponsive and the hard drive light stops showing activity. After reading a lot, I think it's my video card driver. I'm a complete newbie, so any commands need to be written out so I can just type in and cross my fingers. I can boot into the GRUB recovery mode. I log in and have a text based setup at this point.You know, I can type sudo commands and all that jazz. How can I fix my video? The graphics is not integrated. It's a 32mb nvidia TNT2 PRO.

View 1 Replies View Related

Ubuntu :: Boot Splash Screen With Purple Background

Feb 10, 2011

I switched back to my ubuntu installation few hours ago and I couldn't notice the strange boot screen! I remember that it used to be orange, there was the ubuntu logo and a nice loading bar. All is displayed now is a horrible purple background with just the text "Ubuntu" in the middle and a few dots just below it, showing the loading process.. I don't know how to restore the classic splash screen (I also found the original background in /usr/share/images/xsplash ).

View 2 Replies View Related

Ubuntu :: Purple/black Boot Screen No Plymouth.

May 1, 2011

I already had Plymouth issues on 10.10, which was solved by this script [URL]

After upgrade, boot only gave me a blank, purple screen, so I used his revert script then tried this : [URL]

But I'm only getting a black screen. Removing vga=795 option only make it stay purple. It might be because of the multiples workarounds I tried back in 10.10, but I don't know how to clean that up. I have an ATI HD Radeon Pro 2400 card with free drivers (but I was using the proprietary ones during upgrade).

View 2 Replies View Related

Ubuntu :: Screen Freezes On Loading Conky File

Nov 13, 2010

Every time I load my conky file, the screen just freezes. I have tried different conky script but still not working. I also provide some screen shot to have better idea whats going on. [URL]. This is the script I am using right now:

Code:
# set to yes if you want Conky to be forked in the background
background no
cpu_avg_samples 2
net_avg_samples 2
out_to_console no .....

# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 15
gap_y 70
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer no
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# none, xmms, bmp, audacious, infopipe (default is none)
xmms_player bmp
# boinc (seti) dir
# seti_dir /opt/seti
# Possible variables to be used: .....

View 3 Replies View Related

Ubuntu Installation :: Boot From USB Drive - Purple / Black Screen Comes Up

Feb 1, 2011

I am having problems installing Ubuntu netbook 10.10 from a USB drive.
I have a Lenovo ideapad S10-3 with Win 7 Starter.
I have tried two different USB drives, one is unidentifiable, the other is a Kingston.
I have used Pendrive and Unetbootin on both.
I have tried formatting the drives to FAT32 from both the Pendrive option and from Win7's default formatting software.
I downloaded the iso from the Ubuntu website torrent, and I did an md5 check to make sure that the file matched up.

When I boot from USB, the purple screen comes up briefly, and after two seconds changes to a black, terminal screen on which a bunch of text scrolls and then it eventually freezes. When I click a button, the menus pop up, and when I click on either "install" or "run from usb drive," the same terminal thing happens. Someone recommended that I try installing from that screen after changing the f6 options to nomodeset, noapci (I think), and acpi=off. (I cannot remember the exact lettering, but they were options on that f6 menu.) None of these changed the result.

With the Kingston, the line that it freezes on in the terminal is:
[6.548159] USB Mass Storage support registered.
With both drives, when I use the Unetbootin install, the menu comes up, and when I click on either the 'run' or 'boot' options, the cursor in the bottom left of the screen keeps flashing but no progress. (No terminal-like screen with this one.) It is different with the other drive. How to proceed from here?

View 9 Replies View Related

Ubuntu Installation :: Burg Without Loosing Purple Boot Screen?

May 20, 2011

I have a duel booting system, Ubuntu 11.04 and Windows 7. I have installed burg. I have ended up with text when booting ubuntu. When I changed the splash it only show on shut down. How can i make it show on boot?

View 3 Replies View Related

Ubuntu Installation :: Freshly Installed System Freezes Just After Loading Screen

Jan 27, 2010

I recently upgraded from Hardy to 9.10 Kubuntu. The install went smoothly, and when I boot up, the loading screen (the one with the progress bar) does its thing. Then I see the 'waiting' cursor (in Kubuntu, the two dots chasing each other around in a circle). I see this for about two to three seconds, then the entire thing freezes up and I can't do anything, including switching to a virtual console. How do I figure out my system's dying words so I can figure out what's going wrong? As a (sort of) aside, when I open files in /var/log for reading with cat <file> | less, I have to Page-Down a whole bunch to get to the most recent stuff. Is there a way to jump to the bottom, or read with something other than what I have been using?

View 1 Replies View Related

Ubuntu Installation :: Error Loading "OAFIID:GNOME_NetstatusApplet" - Freezes Windows In Lucid?

Apr 29, 2010

After a fresh install of Lucid I found this error on my screen "the panel encountered a problem while loading "OAFIID:GNOME_NetstatusApplet" do you want to delete it?" I kept pressing no and having a completely worthless system. The programs were all opening in the left corner with no controls to move or close them.

View 1 Replies View Related

Ubuntu :: Lucid Sometimes Freezes On Boot

May 29, 2010

When I boot I occasionally get a screen text. Always different. After unplugging everything and waiting for 30minutes I can but again. I think it has to do with my USB-HDDs both which are buffulo external disk drives. what causes this and how to fix it?

View 1 Replies View Related

Ubuntu Installation :: Boot Disk Loads But It Freezes After The Loading Dots

May 26, 2011

tried to install 11.04 using wubi and wouldnt work so created a boot disk and did it that way: the boot disk loads but it freezes after the loading dots

View 6 Replies View Related

General :: Loading Of Lucid Puppy 5.20 - Says Boot Partitions Not Found ?

Jan 5, 2011

During booting of lupu 5.20 ,It starts searching for puppy files in computer disk drives,says boot partitions not found, dropping out to initial ram disk console then /bin/sh: can't access tty: job control turned off # it remains at this position for ever. I have been using lucid puppy 5.1.1 with pen drive through multibooting software of pendrivelinux. I have P2 with 256MB ram, hdd 10GB,usb pendrive 1 GB.

View 3 Replies View Related

Ubuntu Installation :: Upon Live CD / USB Boot After First Purple Screen - Get "No Input Signal" On Monitor

Feb 19, 2011

Iv'e tried on both CD & USB. Upon Live Boot from the CD I get the first purple screen, then "No Input Signal" on my monitor. Upon Live Boot from USB I've choosen both the Install & Boot options, then It thinks for a minute; and I recieve "No Input Signal". I'm leaning toward it being my "Graphics Card"(NOTHING IS WRONG WITH IT OR ANY OF MY HARDWARE!!!!; but it is an "ATI" ^_^), but thats just a guess. Iv'e Tried Both 32/64 Here Is My Hardware Information... (Everything is Brand New & Full Diagnostics)

Intel Core i7 950
MSI Big Bang-XPower (MS-7666)
DDR3 1333 gSkill Ram (6 x 1gb)
ATI Sapphire Radeon HD 5870 (2 gb Memory, GDDR5)
HANNspree 28" Monitor 1920x1200

View 4 Replies View Related

Ubuntu :: Stuck On Black Screen With (mouse) Cursor After Grub And A Purple Screen?

Jul 21, 2011

I installed Ubuntu 11.04 today as the main OS on my laptop.I had deleted my XP partition, and repartitioned it according to a guide I had found. (http:url)......Basically it was setup like this: 500mb ext2 primary partition, has the grub folder, I believe this is either the '/' partition, or the '/boot' partition 2gb swap space logical partition

10gb ext4 logical partition -- this is either the '/' or the '/boot', it contains the 'bin,boot,cdrom,dev' etc folders 243gb (the rest of my hard drive, with the exception of a partition that contains documents and files from my XP OS, formatted to NTFS) ext4, this is the one that has all my desktop/documents/etc folders.After Ubuntu was done installing, I had some message pop up about installing an ATI proprietary driver for my ATI graphics card (an ATI Radeon HD 4330, I believe, I may have messed that number up). I installed it and rebooted, no problem.

Next, I had another update window pop up with 198 items checked and ready to download and install. I went through all of this, and rebooted, again, no problem.Next thing I did was install some apps that were essential for me to have to use for my work (an ide, chat programs, etc). No problem with any of that.Last thing to install was the OSE Virtualbox, and then I installed WindowsXP Pro and Windows Vista Business, then installed the guest addition addon for VB. This all worked without any issues whatsoever.

Time goes on, and I notice my computer is heating up much more than (seemingly) normal. I begin to wonder if its my graphics card. So I shut down the computer and let it cool down. Reboot, and no problem, still working fine.Then I opened a couple of apps and tried a simple game (can't remember the name) I believe it was a simple 3d topdown, as I wanted to test my graphics card. This is where things seemed to start to go wrong. My laptop began hanging, not even allowing me to access the terminal via ctrl+alt+f2. The screen flashed and I saw the blue/green/grey fuzz that I get when the graphics card is starting to heat up too much. Then everything hangs and I can't do anything at all, including move the mouse. I did a hard reboot (I believe this is what you call pulling the plug/pressing the power button, correct me if I'm wrong). I then rebooted, saw a chkdisk, then it booted seemingly normal, but it hung right after the purple screen after the grub screen.

This is pretty much where I'm at right now. I strongly suspect the fault is with the ATI drivers, but have been completely unsuccessful in my attempts to fix it. I've googled just about everything I could think of, along with searching these forums. I've tried just about everything listed in the forums, but to no avail.I've tried the commands that are supposed to purge the ati drivers, but all I get are errors that say they can't remove the 'virtual drivers'.

Right now I'm booting off a live cd, so I know the computer still works fine, just not my actual installed OS. I'd really like to get the issue resolved without having to reinstall, as it took quite awhile just to get it usable in the first place, but this has already taken so much time, I may just resort to that if we can't solve it any other way. Got too much work to catch up on as it is.As a re-instated note, perhaps if you have any tips, but not particularly about fixing the OS, my laptop (I'm strongly guessing my graphics card) is heating up much more than normal, compared to that when XP was installed. Is this more than likely just a driver issue, as is the rest of it? Also, I did have Compiz installed, though I didn't choose for it to be installed, I believe it came pre-installed. I've heard it could cause some issues, though I have no idea as to the validity or relation to this particular issue.

Edit:
I just remembered while searching for a solution, I found a post somewhere that said something about the information not being sent to the monitor from the graphics card properly, thus no desktop. I'm guessing that'd still fall under the driver issues, but again, I'm unsure. I would think that wouldn't be entirely true anyway, since I can still see my mouse fine, just no desktop, only a black screen.

View 1 Replies View Related

General :: 10.10 Booting To Terminal - Black Screen Instead Of The Normal Purple Screen

Dec 8, 2010

i am fairly new to Ubuntu. i was using it fine for a month, but today, when i booted my computer up, it came up with a black screen instead of the normal purple ubuntu screen. the black screen had white text on it, and asked for my username and password. from there, it was a terminal prompt. i have been google searching for a while, and have tried typing "startx", "sudo apt-get install ubuntu-desktop", "sudo gdm", and i have also tryed uninstalling xorg, and reinstalling, and none of these things wanted to do anything for me.

View 4 Replies View Related

Ubuntu :: 10.10, Boot Up Freezes At The Login Screen?

Mar 30, 2011

i start up the computer, it loads, it arrives to a screen that says the laptops name, and a bar at the bottum. I can interact with this bar, it is blank and has a picture of a little man with a circle. Clicking on this does nothing, another says shutdown and reset, again clicking on it does nothing. I think the error occured when the computer got unplugged while updating.now before we get into all this GRUB and fancy stuff. I am completely new to linux. I installed this using a cd made from an iso image downloaded from the site. I did not use a windows loader. I don't even have windows anymore. I have all my personal information and data on here and would like it to be restored.I googled it and it says to go to recovery mode using GRUB, don't know how and don't know what grub is.:confus ed:

View 3 Replies View Related

OpenSUSE Install :: Gfx Boot Loading Screen?

Dec 26, 2009

Testing a Laptop with a live CD proved the gfxboot menu and loading screen during loading. After installing, I am seeing the "behind the scenes" of linux loading and showing done in green.

How do I get the graphical system loading screen shown?

View 9 Replies View Related

Installation :: Ubuntu Won't Boot Past Loading Screen / Get This To Work?

Sep 4, 2010

I'm trying to install Ubuntu on a Dell computer of mine but I can't get it to boot past the loading screen. I'm using 10.04 live CD. At the loading screen (boot, memory test, etc..) I select to boot the live CD and after that, I get a black screen followed by no signal from my monitor. My monitor is a 42" LCD TV (I had plans to turn this PC into a HTPC using Ubuntu and Boxee). I know Linux will work on this box, because it has in the past. Now, before I used to have an ATI Radeon X 1300 PCI-E card and now I am using an ATI Radeon 2900GT, and since cannot boot.

Does anyone have any idea on how I can get this to work?

View 2 Replies View Related

Ubuntu Installation :: 10.10 Boot Loading Screen And Flash Plugin

Oct 10, 2010

i have just upgraded to 10.10 from 10.04. i have an acer netbook (d250 one). i had boot loading screen problems with 10.04 too. i hoped that this issue will be fixed with the upgrade but not. after the grub menu, a black screen appers until the password prompt screen. there is no purple loading screen, just a black screen. is it a plymouth prob? also i realised that when i playing videos in videos the sound crashes a bit. i'm using google chromium. but my main problem is the booting one not the flashplugin. the new 'ubuntu' font is awesome. i <3 it.

View 9 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved