Ubuntu :: 10.10 Freezes At Splash Screen Upon Loading?
Dec 21, 2010
I was not able to install any version of Ubuntu. Everytime when the splash screen would appear, the computer would freeze and no hard drive activity would be present. The only way was to use the alternate install version of Ubuntu 10.10. Though, the splash screen problem persists. After the Ubuntu boot screen disappears, the splash screen appears with the coursor. About 3 seconds later it becomes unresponsive and the hard drive light stops showing activity. After reading a lot, I think it's my video card driver. I'm a complete newbie, so any commands need to be written out so I can just type in and cross my fingers. I can boot into the GRUB recovery mode. I log in and have a text based setup at this point.You know, I can type sudo commands and all that jazz. How can I fix my video? The graphics is not integrated. It's a 32mb nvidia TNT2 PRO.
View 1 Replies
ADVERTISEMENT
Mar 5, 2010
I am running Ubuntu karmic with Gnome desktop
I rebooted it as a package (GRASS GIS) wouldn't open properly, the splash screeen appeared but it appears to freeze and does not get to the login screen. I have tried to boot in safe mode but pressing ESC at grub doesn't work and Ctrl+Alt+F1 also fails to invoke anything. I can connect remotely via ssh. I have tried to remove Gnome desktop so I can just go straight to commandline but it still brings up the splash screen, I removed desktop using sudo apt-get remove gnome-desktop it said it did.
So why did this happen, last night I logged in via ssh and x-win server started a screen and did some work, the x-win server I lost my internet connection so putty aborted, this morning I couldn't connect to the screen so I did screen -wipe then rebooted as another package kept exiting.
any help much appreciated, this has happened at a vital time during my PhD and I need ubuntu back asap! In the meanwhile I am working via ssh with a slow Internet connection so not ideal!
View 1 Replies
View Related
May 19, 2010
I have finally successfully triple-booted Snow Leopard, Windows XP, and Ubuntu 10 on an iMac but I have 1 problem: Whenever I am in Ubuntu and select "Restart," it goes to the splash screen and loads 2 of the dots and then freezes and hangs there forever. If I do "Shutdown," it works properly. Note: I am using rEFIt as the triple boot loader. GRUB installed on sda3 with Ubuntu.
View 9 Replies
View Related
Jun 14, 2010
I upgraded a week or so ago to 10.04, and everything was working fine. Then suddenly a few days ago the computer froze at the splash screen on startup. Thinking it was just some sort of neurotic, temporary issue, I restart again, but no luck -- same problem.
In terms of what I changed before the problem happened, I don't recall changing any system settings. On possibility is my changing things to skip the login screen and go strait to my account, but I believe I had done that a few shutdown/restarts before.
View 7 Replies
View Related
Feb 14, 2010
I set up a dual boot on my laptop a few days ago, between Windows XP and Ubuntu 9.10 (installed from Live CD). All the hardware is working fine.
Anyway, SOMEtimes, during the splash screen , the screen turns off (physically turns off) and the hard disk seems to stop. I cant do anything appart from force it to power down.
Yet sometimes, it boots up fine.
I want Ubuntu to work first time EVERY time.
View 3 Replies
View Related
Aug 26, 2009
i have a splash screen i want to use while gnome is loading (well it is a pic rather than a splash) rather than black screen till gnome i use ubuntu 9.04 or macbuntu as i call it (is looks exactly like a mac) so can i use a image while gnome is loading ?
View 3 Replies
View Related
Apr 4, 2011
Adding several 2TB HDDs somehow crashed SATA controller on motherboard.Fedora will no longer boot.
I connected HDD (with Fedora OS) to another computer.Fedora gets past GRUB, but hangs before loading the splash screen.Is something wrong with GRUB settings?Previously, I had dual boot at GRUB (Fedora and WindowsXP).
What is the easiest way to get Fedora to boot properly on another system?I need access to those files.
View 14 Replies
View Related
Jan 3, 2010
Just installed Fedora 12 stable release without checking office/productivity, server, or developer "package options". Running Gnome.Used yum to get Amarok on here, and it freezes almost immediately every time I try to open it. The splash shows, a program shows up on the window-manager panel labeled "KDED Glob..." and the system freezes. Mouse, keyboard, all unresponsive. I had FC12 Beta on this exact system and Amarok worked fine. Noting that KDED Glob is probably part of KDE, and that I did not install KDE, I thought maybe Amarok depends on a KDE component that the repo did not pick up as a dependency. Tried to install as much of the mainstream KDE components as I could, with no change.
View 4 Replies
View Related
Apr 17, 2011
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
View 6 Replies
View Related
Nov 13, 2010
Every time I load my conky file, the screen just freezes. I have tried different conky script but still not working. I also provide some screen shot to have better idea whats going on. [URL]. This is the script I am using right now:
Code:
# set to yes if you want Conky to be forked in the background
background no
cpu_avg_samples 2
net_avg_samples 2
out_to_console no .....
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 15
gap_y 70
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer no
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# none, xmms, bmp, audacious, infopipe (default is none)
xmms_player bmp
# boinc (seti) dir
# seti_dir /opt/seti
# Possible variables to be used: .....
View 3 Replies
View Related
Jun 29, 2010
When I try booting my computer under Ubuntu, it freezes whenever it gets to the part of the purple loading screen (with the Ubuntu logo and the red/white dots indicator). I won't load any further, but I can still turn it off by pressing the power button. Has someone else got this problem? Ubuntu was my main partition, and I don't have any practical way to make a hard install.
View 3 Replies
View Related
Jan 27, 2010
I recently upgraded from Hardy to 9.10 Kubuntu. The install went smoothly, and when I boot up, the loading screen (the one with the progress bar) does its thing. Then I see the 'waiting' cursor (in Kubuntu, the two dots chasing each other around in a circle). I see this for about two to three seconds, then the entire thing freezes up and I can't do anything, including switching to a virtual console. How do I figure out my system's dying words so I can figure out what's going wrong? As a (sort of) aside, when I open files in /var/log for reading with cat <file> | less, I have to Page-Down a whole bunch to get to the most recent stuff. Is there a way to jump to the bottom, or read with something other than what I have been using?
View 1 Replies
View Related
Mar 16, 2011
I have been using slackware since version 10.1 and really like it. I have never had a problem until lately, version 13.1 has been stable as a rock for me. The first 2 or 3 updates to current ran well but then the problem started. After installation Slackware would get to the splash screen and bring up the first picture of a disk drive then just hang and never go any further. I do have a good burn on the dvd, have checked the md5 and burned at 4x. then slack 13.37 does the same thing. this is on 4 different computers with several different video boards.
View 8 Replies
View Related
Apr 25, 2010
If I re-install Grub 2 from the live CD should that reset all the personalisations such as as splash screen and colours in the Grub splash to default? In my case they are not resetting. I would expect them to revert to the default black/white you get when initially installing the OS. the Grub timeout to be a lot less than its supposed to be? e.g. the default timeout setting of 5 seconds is more like 2 or 3 in reality, and when I set my prefered value to 2 seconds it results in being about 1/4 sec or so.
View 9 Replies
View Related
Jan 26, 2011
Since updating my graphics driver on ubuntu 10.10, My splash screen has been inconsistant and messed up. Sometimes ill get random command lines mixed in with the usual splash, sometimes the splash wont show and it will just be black till the desktop appears, sometimes it flashes on and off. I originally tried fixing the resolution and just made the problem worse. Then I tried installing a new splash via gnome-look.org, but it just made my shut-down splash blank and didnt effect my splash at startup. I just want the original splash that ubuntu is supposed to have.
View 6 Replies
View Related
Mar 26, 2011
I'm running 64 bit Ubuntu, and on the start-up after I pass the GRUB it goes blank for a minute then briefly shows the splash for 5-10 secs and then jumps to the login screen. Also the screen is offset by about 10-15 pixels but from the login screen onwards it is centred. (It's also like this for if I'm in recovery mode)
How do I fix this and Im wondering if it is a hardware problem?
View 2 Replies
View Related
Oct 25, 2010
I recently installed Ubuntu Studio and after an update the standard Plymouth splash screen began to show. I tried changing it back via the "sudo update-alternatives --config default.plymouth" method but I am getting a blue kbuntu splash screen instead of the ubuntu studio splash.
View 1 Replies
View Related
Aug 25, 2010
I'm trying to install 10.04 Ubuntu using a USB drive. I restart the machine and I get the Ubuntu start up screen. I select to install Ubuntu on my hard drive. It does its loading process and brings up the splash screen. The red lights blink for about 10 seconds then stop. Everything freezes: the keyboard, mouse, screen, lights, everything. I can still perform a reboot, but this situation happens everytime I try to load.
Here are some system specs for my computer (edit: these are the correct settings. The settings I have in my sig are not correct. I will change them soon. Sorry about the discrepancy)
Intel Core 2 Quad Q6600 2.40Ghz
Nvidea GeForce 8600 GTS graphics card
Trying to create a Windows 7 dual boot
8GB Memory
I tried a few things with sending noapic and nolapic as parameters to boot and that didn't work as well.
View 9 Replies
View Related
Apr 30, 2010
Since I know there's a lot of support threads going, I wouldn't ask unless I was really stumped and couldn't google. I'll get right to it.
10.04 fresh installed fine, working, few reboots, all good. Installed Nvidia 195 drivers. Not so good, still works fine, but framerates not as good as the 190 drivers I'd been using with karmic. So I installed nvidia-glx-190 and nvidia-190-modaliases with the nvidia PPA for jaunty. They didn't appear on the restricted drivers list, I rebooted in the hope they would, and now my boot process is as follows.
Boot, met with a blinking _
Goes blank
Another blinking _
Green static appears momentarily, then very fast the Ubuntu splash appears, the white orbs all turn orange, and there it hangs. The splash itself is in the wrong resolution.
Everything is the same as when it was working except it didn't totally freeze at the end. It responds to nothing except the power button (and sometimes not), I can't access a shell or the grub menu at any stage during the boot process like I usually would, and nothing in the boot log seems out of the ordinary.
What should I do? I'm on a LiveCD desktop, got the harddrive mounted.
Macbook pro 4,1, 2GB ram, Core2duo with Nvidia Geforce 8600GT
View 9 Replies
View Related
Nov 1, 2010
So I turn on my pc today, select ubuntu studio from GRUB and it freezes during the splash sequence - I hard shut down and the power back on and. nothing. Hard drive light illuminates once then stays off. External HDD powers on. Processor light comes on but no graphics - no manufacturer stuff, no bios entry - nothing.
View 9 Replies
View Related
Apr 7, 2011
One requirement of a project I am currently working on (for Maemo) is that the Qt application displays a QSplashScreen when it loads.
My issue is that the application is fairly small and I have written it to load components etc as they are required rather than at start-up. This has lead to quick start up times (which, in a perfect world is what we all strive for!)
How would I intentionally delay the start-up time so that the splash shows for longer?
I have investigated
Quote:
QTimer:: oneShot() (Space added to prevent smiley)
however, its prototype dictates that it be connected to a slot. I am running this QSplashScreen from inside main so this is neither needed nor feasible.
What is the best way to essentially do this:
Code:
Display Splash
Timer for 3 seconds
Close Splash
Display mainWindow
I do not want to use native system calls such as sleep() and would instead rather a Qt based solution.
View 1 Replies
View Related
May 12, 2011
When I install Ubuntu 11.04 with Wubi, I get this freeze screen after I reboot and get past the Ubuntu splash screen: url
As you can see, it's a scrambled picture of my Windows desktop. This happens with every other version of Ubuntu also.
I'm running a 64-bit PC and I don't wanna waste another CD or use a USB to install, because I actually progress further in my efforts whenever I use Wubi.
View 6 Replies
View Related
Jul 21, 2010
I received the Ubuntu CD by mail the other day and tried to install a dual boot with it. I first tried it out by running from the CD and the first problem I had was the screen froze after the splash screen. So I lurked around for a bit and found out that I can press any key on the screen with the keyboard and person to get to a different screen. At this screen I entered "F6" and then entered "nomodeset", this allowed me to pass the splash screen.
Next, I got into Unbuntu but I found out that the keyboard and mouse weren't working, so I lurked again and found out that I have to enter "noacpi" (sorry if I got that wrong, I forgot the name ). I ran by CD once more and everything worked, so I decided to finally install it next to my Vista. However, after installing it goes straight to the splash screen, and the freezing happens again. The screen where the keyboard and the person are not showing up so I have no idea how add the "nomodeset" and "noacpi". So my question is, how do I get to the screen where I can add both those things? Also, is there a way to add it permanently so I don't have to keep pressing F6?
View 2 Replies
View Related
May 21, 2010
Out of nowhere Ubuntu (intrepid, I believe) has stopped loading for me. When it attempts to load gdm the screen starts flashing at the splash screen and then eventually dumps me to the terminal. From there I can login without any problems but can not get the GUI to load.
When I run sudo gdm-binary it does the flashing splash screen again and then spits out the error message: WARNING: Unable to find users: no seat-id found. Then a few warnings about longest graphic displayed 2.5xxx seconds
I tried running sudo dpkg-recondifigure gdm and relaunch gdm as above and it did the same thing.
I was not able to successfully connect to my wireless network through the terminal to try to update in the hopes of that fixing the problem. Perhaps someone can give me instructions on how? (I have tried but can not figure out how to initialize wlan0).
Or, is there something I can do from my installation CD?
View 2 Replies
View Related
Dec 22, 2010
I have been running 10.04 quite successfully, when I upgraded to 10.10, I have a problem with the newer kernels. If I let it boot into the latest one 2.6.35-23, I get the Ubuntu 10.10 splash screen for a second then a blank screen, same with 2.6.35-22. I have to run with 32-25 to get it to load the gui.
I have an AMD Sempron 2800, 1.6GHz pc, but I'm not sure if it's running 64bit.
View 7 Replies
View Related
Jul 31, 2011
I'm trying to install Ubuntu 11.04 on this old desktop that is currently running WinXP. I get to the menu to choose to try ubuntu, install, or boot hard drive. I choose Install and it begins to load with those 5 dots then after a minute or so it just freezes on that screen. I then try to choose the "try" option and it does the same thing, although takes slightly longer before it freezes.I just happen to have a v8.10 disc laying around so I try that. I get to the same options menu, it loads, and then shows a black screen with a white blinking underscore. Same goes for when I use the "try" option.Specs:2.53GHz P41.5GB RAM250GB HDD
View 2 Replies
View Related
May 13, 2011
I am using grub4dos 0.44 but can't boot directly into Kubuntu. The bootup freezes at the step of reading the initrd. Can't copy 'n paste the exact bootup-message but it looks similar to this one, I found on another forum-thread:
Code:
Filesystem type is fat, partition type 0x06 [Linux-bzImage, setup=0x1400, size=0xcff87] Unlike the guy who posted the two lines above, I installed Kubuntu on an ext3-partition (hd0,5), (which is /dev/sda6 in Ubuntu) and without an own bootloader, since I wanna use grub4dos instead of grub2. The installation is fresh - the initrd-file shouldn't be broken. My menu.lst looks like this:
[Code]..
View 1 Replies
View Related
Jun 3, 2011
I am having problems opening and printing word 97/2000 formatted documents that were saved using OpenOffice in Maverick. If I try to open one of these files in openOffice for Lucid, it causes OpenOffice to freeze every time. If I save the files in OpenOffice format and share them between Maverick and Lucid - everything works fine. Anyone know what might be causing OpenOffice in Lucid to freeze when loading word 97/2000 files?
View 5 Replies
View Related
Sep 19, 2009
I installed fedora on my laptop and everything went fine, i installed my bradcom drivers and rebooted.
Next step was kmod for nvidia but when i rebooted i couldn't use fedora anymore cause loading freezes at some point. same thing happens to my desktop pc, where i solved the problem booting with an older kernel (this time i have an error saying "eth0 link not ready" or something like that). Everytime i try to boot with a more recent kernel loading freezes. The point is...i can go through with my desktop pc by choosing another kernel, but i can't even boot with my laptop.
View 1 Replies
View Related
May 26, 2011
tried to install 11.04 using wubi and wouldnt work so created a boot disk and did it that way: the boot disk loads but it freezes after the loading dots
View 6 Replies
View Related
