Testing a Laptop with a live CD proved the gfxboot menu and loading screen during loading. After installing, I am seeing the "behind the scenes" of linux loading and showing done in green.
How do I get the graphical system loading screen shown?
I have installed "open-SUSE 11.4" on a "500GB Free Agent External Hard Drive". I didn't have any problem in booting since last week that I booted it from my laptop. Also I did it before several times from then when I try to boot it e.g. from an "Intel(R) Core(TM)2 Quad CPU Q9400 @ 2.66GHz" PC the time between loading INITRD and starting boot sequence messages lasts nearly 30 minutes!(i didn't actually measure it but it take a long time in the same order). after starting boot sequence which is showed on monitor everything looks normal. e.g copy of files would be done by speeds between 2MB/s to 30 MB/s depending on the targets.I used to use the external hard derive to boot from different laptops and PC's from start but I didn't have such a problem anytime.
View 1 Replies View RelatedI have openSUSE 11.2 and boot using GRUB. I was looking on start-up options for 11.2 and saw where it said
splash=silent
and
quiet showopts
I was wondering what they meant?
During boot-up of openSUSE 11.2 (dup'd from 11.1; default runlevel 3) the following message appears:
Code:
My question now: Is there a way to tell SUSE to set the above mentioned keymap using UTF-8 encoding instead of assuming ISO-8859-15?
The few Google search results (~7) on this topic also seem to indicate that this is a 'German-only' problem because it only seems to appear when setting German keymaps.
I have installed openSuSE 11.4 32-bit on my PC. Installation went okay, but when I shut down the system and started later it does not load.
My computers have;
- Intel Pentium Dual Core processors
- Asus motherboards
- Onboard VGA, Sound, NW
- 2 GB DDR2 RAM
- 80 GB SATA HDD
code....
What happens is, the first screen appear (where it instructs to press DEL to go to BIOS), then the system hangs us displaying "Error Loading Operating System". There nothing works, except the CTRL+ALT+DEL. Press CTRL+ALT+DEL, same cycle repeats.
When I try booting my computer under Ubuntu, it freezes whenever it gets to the part of the purple loading screen (with the Ubuntu logo and the red/white dots indicator). I won't load any further, but I can still turn it off by pressing the power button. Has someone else got this problem? Ubuntu was my main partition, and I don't have any practical way to make a hard install.
View 3 Replies View RelatedI'm trying to install Ubuntu on a Dell computer of mine but I can't get it to boot past the loading screen. I'm using 10.04 live CD. At the loading screen (boot, memory test, etc..) I select to boot the live CD and after that, I get a black screen followed by no signal from my monitor. My monitor is a 42" LCD TV (I had plans to turn this PC into a HTPC using Ubuntu and Boxee). I know Linux will work on this box, because it has in the past. Now, before I used to have an ATI Radeon X 1300 PCI-E card and now I am using an ATI Radeon 2900GT, and since cannot boot.
Does anyone have any idea on how I can get this to work?
i have just upgraded to 10.10 from 10.04. i have an acer netbook (d250 one). i had boot loading screen problems with 10.04 too. i hoped that this issue will be fixed with the upgrade but not. after the grub menu, a black screen appers until the password prompt screen. there is no purple loading screen, just a black screen. is it a plymouth prob? also i realised that when i playing videos in videos the sound crashes a bit. i'm using google chromium. but my main problem is the booting one not the flashplugin. the new 'ubuntu' font is awesome. i <3 it.
View 9 Replies View Relatedthere is a way to change the OS boot screen from the blue loading bar at the bottom to something more fancy. For example if you take a look at Oracle Enterprise Linux 6 they have a loading screen that makes an "O" on start up. Note: I am not talking about GRUB, I already know how to change the grub boot screen. If so can someone provide the steps needed to modify the OS loading screen.
View 1 Replies View RelatedI got a new Lenovo S20 and I am having trouble loading Linux. I've loaded these variants with no success:
Ubuntu desktop
Ubuntu server
Linux Mint
CentOS
vmWare esxi
The live CD's run, and very nicely at that. But once I install to the workstation they won't boot. I just get a blank screen. I've tried different bootloaders.. I've toyed with different BIOS settings.. I've even installed to different drives (a hard disk and an SSD). Maybe a hint: BSD installs and runs with no problem at all. I have PC-BSD running at the moment. It's nice, maybe I'll keep it. But I'd rather have Linux.
My amateur computer science mind sees this as not a boot loader issue (recovery mode shows Linux seems to be loading to a point.. but I can't see the script line just before the lockup) not graphics related; UB Server and vmWare are text-only and they won't load either probably not a bios issue (liveCDs run and other people run Linux on S20s) not hardware (Windows and BSD run on this one)
I am trying to install the latest openSUSE 11.1 64-bit using an installation DVD downloaded.
I have my boot order set up so that the computer tries to boot from the CD/DVD drive first.
When I restart, I get the following:
0: NO emulation system type 00
1: NO emulation system type 00
Enter a choice:
Regardless of whether I enter 0 or 1, the system boots into the regular Windows vista.
Here are my system details:
Laptop: HP Pavilion dv4t-1300 Entertainment PC.
Processor: Intel Core2Duo.
OS: Windows Vista Home Premium 64-bit.
Memory: 4 GB
It's a new computer with a recovery partition of 13 or so GB and a single partition of (250GB - 13 or so GB). I want to use the openSUSE re-partitioning system during the install.
I did search for this problem. Even though I found some similar problems, I couldn't find anything where, a person couldn't get to the boot screen at all.
I've been running openSUSE 11.2 within a VM using VirtualBox 3.1.2 with Vista x64 as the host OS for quite some time now with good results. Yesterday I went to reboot the VM and VBox made some comment about 3D not working and needing to install the VBox guest additions (which were already installed). After rebooting and seeing the openSUSE splash screen, I now get a solid purplish display with no activity. I've tried running "sax2 -r", re-installing guest additions, running the repair CD, and other things but this problem has not gone away. Aside from reloading the OS, does anyone have ideas on how I might fix this?
View 7 Replies View RelatedA surprising thing has happened! I have been happily using open suse 11.3 on an HP probook 4320s laptop. On reboot this morning, the screen starts out fine, but progressively fades into white and the boot does not seem to happen (at least there is no sound, since I cannot see anything). I am left with a completely white screen. Things are fine with the failsafe mode.
View 9 Replies View RelatedI very frustrated at this point. I have tried to boot OpenSUSE 11.4 from the usb flash drive iso and CD iso. After I restart my computer the boot menu comes up and I click the boot option and the screens loads a bit and then goes black. I have also tried the text installer, but that doesn't work either. I know the problem must be my graphics chip. I have a integrated Intel HD Graphics chip. My laptop is a Gateway NV79. How can I get the graphics to work?
I've tried everything I can think off. I'm not the most computer savvy so if someone replies I would appreciate a dumb-down explanation on what to do with clear steps, if possible. Note: I'm dual booting with windows 7. The graphics problem is not just OpenSUSE. I tried Ubuntu 11.04, Kubuntu 11.04, Fedora 15 and they all have the same problems. In Fedora 15, I was able to boot in but I got an error message that said Gnome 3 fallback and I couldn't get the graphics to change to standard mode
I use Suse Linux 11.1 on a VMware Workstation 6.5.3, and I've run into the following strange behavior: occasionally (happened two-three times in the last several days), I get instead of the usual boot options screen, which is of green color, a screen with the same content but which is predominantly blue; in fact it contains a sort of snowscape with a penguin walking across it. So far I haven't noticed anything wrong with my machine; but I'm curious if anybody else has noticed it. Could it be some malware
View 2 Replies View RelatedI recently installed 11.1 via unetbootin from the network onto an old Sony VAIO laptop. After the installation completed, I suppose the OS started to boot, but I was presented with a black screen. I heard "chimes." The black screen does not provide any visible feedback from mouse or keyboard input. I hard rebooted and was presented with an interesting background graphic (grayish, I think) that faded to the same black screen.
View 9 Replies View RelatedA few days ago I updated my openSUSE installation on my Acer Aspire 5920G notebook from 11.1 to 11.2, but I haven't been able to get any kind of graphical shell loaded. Using the regular "desktop" option in GRUB results in a black screen. seems my PC is still responsive though as hitting Ctrl+Alt+Del like a mad man results in the PC getting rebooted after a while. I had the same "black screen" issue with the KDElive CD and the regular installation CD (Yeah, I should have known better than to do the upgrade...).
When opting for "Failsafe" in GRUB, I reach a command line. Before that it seems to try to load GNOME (you get to see the cursor) but fails at it a few times in a row. When I try to start GDM afterwards from the command line, it gets into a loop in which it tries to load, then crashes and then tries to load again, endlessly.I have installed the newest NVIDIA drivers "the hard way", and my card (NVIDIA 8600M GT) is on the list of supported devices on the NVIDIA website. SaX2 seems to work OK with it.
I have been trying to fix this for some time, on and off, and have been unable to, I have also ben unable to find a solution in the forums.I have installed openSUSE11.2 GNOME on a laptop, the install went fine, and it runs great, except for two problems:When I start up the splash screen doesn't show (this isn't really important, and I am happy to watch as everything is loaded)When I shutdown/reboot the computer freezes and I have to use the power button to switch off.This doesn't happen every time I shutdown, but most of the time.The freeze happens at different points of shutdown, so I don't know where to find what is causing the problem.As I mentioned point 1 is not really important, although I would like to know why this is happening, but problem 2 is very important.
View 9 Replies View RelatedI've run into a strange problem recently. My primary OS right now is Windows 7, and OpenSUSE is secondary. I had GRUB as the bootloader, and everything seemed fine, but I ran into one problem in Windows 7: one program refused to work correctly with ATI forced anti-aliasing on, but it is needed by others (or else edges look jagged).So I decided to install ATI Tray Tools. But it seems that Windows 7 is being evil and won't let install drivers that their creators didn't pay Microsoft for (thank goodness that's not the case in Linux). That means I had to use a driver overrider program, and that means that it had to change the Windows 7 BCD options. And that's where bootloaders kick in. It seems that Windows 7 is too lazy to check for its BCD on other than active partitions, so it doesn't allow the overrider to function.
So what I did was change GRUB to boot Windows 7 with makeactive flag. The problem now is - it won't deactivate! I no longer get GRUB's boot screen, it just boots to BCD directly. So my question is - is there a way to deactivate (or, rather, reactivate the /boot partition) after Windows 7 shuts down or restarts automatically? Obviously I don't want to use GPartEd each time I want to boot to Linux.
how to change the boot splash screen in Ubuntu (it's using xsplash) but since openSUSE is most likely a bit different, i would like to find out how i can change it here, on openSUSE 11.2
View 1 Replies View RelatedI have never been able to see the splash screen, something that I'd like. I have checked the options on the bootloader and it says "splash=silent" (that's disabled?). I found it confusing, because the ubuntu kernel boots with "splash" but when I try that option on OpenSuSE 11.2 it doesn't.Also when I shut down the laptop the screen goes crazy, only the two top cms shows "something" which are blinking and crazy green and white console words moving from one place to another so fast I can't even been able to read what it actually says.Either way, the laptop shuts down without any problem (?). I think is the normal shutdown process (without splash) but it's a bit perturbing. I've had had a couple of kind of "aesthetics" issues, but far from critical. My overall experience with OpenSuSE after 4 or 5 years being "debianized" have been very nice .
View 3 Replies View RelatedSince 11.2 installed but shows blank screen at boot despite booting into runlevel 3 with acpi=off and noapic, I decided to try 11.3 M4 again.Media check is OK for 11.3 M4.Boot from MBR. GRUB menu shows Ubuntu and Windows 7 as well as openSUSE 11.3 desktop default and 11.3 failsafe. Both opensuse11.3 default and 11.3 failsafe return a blank screen despite the following boot options:
33 acpi=off noacpiI still cannot get to a terminal to run sax2. I read from a thread of opensuseforums (Opensuse 11.2 Blank Screen) where similar problem was solved using the correct driver which is actually "ati", NOT "radeon" for ATI Technologies Radeon Xpress 200M.Then because both Windows and Ubuntu boot fine from GRUB menu, it occurs to me I should boot up Ubuntu and try to locate openSUSE's /etc/X11/xorg.conf in order to edit the file and change the driver to "ati".In Ubuntu, xorg.conf of opensuse 11.3 M4 shows:
Section "Device"
Identifier "Configured Video Device"
EndSection
[code]...
i've just tried to install openSUSE on to a spare hdd, i've also got windows 7 on another. After installing everything and the computer went to reboot the screen just went black and didn't restart. After restarting it myself, i turned the computer on and got to a menu that says:
openSUSE
failsafe
windows
When i tried to go to openSUSE it seemed to work and a long list of text came up but after a few seconds it went to a blank screen. The same thing happens when i go to failsafe. so i'm not really sure what to do, i would have tried a few things i've found from searching but can't get to the command prompt on failesafe.
I've got an ati readon hd 4750 video card.
I have tried two distros - Mandriva and OpenSuse. Both provide the same results, though Mandriva booted...but still the same problem, after installing blank screen comes up and nothing. Keyboard touch bad, mouse nothing happens. I would prefer openSuse but may have to switch.
Equipment:
Acer 7740 17" laptop
Intel i3-330M Chipset
4Gig DDR3 RAM 1066
Intel Integrated HD Video 128MB
Install Win7 64-Bit no issues, wiped and installed Linux and I cannot get past this blank screen. Installation works, no problem installed packages etc. When coming up on 1st boot, login - boom nothing? Searching the web and I suspect the Intel graphics are the problem but I'm not sure.
I bought this laptop to put Linux on it solely for a personal project of using Linux for a year. I'm an IT professional for 23 years and comfortable with CLI.
I installed 11.3 as a new install over 10.3, kept the $home and windows partitions, and let it reformat the other two partitions. NO disk partitioning structure was changed.
I did get a warning that GRUB over 128GB might not be able to boot.
I did enable the MBR.
GRUB menu does come up, but upon selection of SUSE 11.3 entry the computer screen blanks, and nothing happens. Selecting Windows does work upon power-up.
I did not have this 128GB issue with 10.3. What are my options? I am really afraid to install 11.3 on production machines now (running 11.2).
I've down loaded the live CD for SUSE 11.3 and, using isohybrid and dd, I put the contents onto a USB stick and made it bootable. All good so far.
I then installed SUSE on one of the partitions on my hard disk (Windows is also on the disk). I set 4GB for SWAP, 16 GB for ROOT and the rest ~270 for /HOME.
I set the bootloader to be installed in the MBR.
The installation completed with no problems indicated.
I was asked to reboot and did so, removing the usb stick so that 11.3 would boot.
The reboot failed! I was presented with a black screen and nothing else happened.
I tried again, selecting openSUSE 11.3 from the boot menu. - Again a black screen shortly after pressing enter.
I can boot in Failsafe mode and then login with text prompt. I can't boot into runlevel 3 (same problem - black screen)
Does anyone know whether this is a problem with network configuration or graphics?
I have a notebook with ATI Radeon Mobility HD 5650 graphics card and
ATHEROS ar8132 ethernet controller.
I recently upgraded from openSUSE 11.2/Gnome to openSUSE 11.3/Gnome
The instructions are followed is as below:-
How To Upgrade OpenSUSE 11.2 To 11.3 (Desktop & Server) | HowtoForge - Linux Howtos and Tutorials
I still see 11.2,11.2 safe mode start up menus on boot, i would like to remove these menus.
Would removing these menus affect stability
Also how do diagnose any left over trash ,non applicable software left over from 11.2
I have a small question for you my friends."HOW CAN STOP BOOT SCREE AND RESTART ,WHAT KEYS ARE NEED?"I want to say thisC starts and I want to stop in whatever one point to read the messsage ,especially when I see "failed".I have 2 points with failed I can't have enough time because it's going fast.Of course I read the boot messages from /var/log but they are too long and to be honest evan I used in "gedit" the option "find" to search of raws with "failed" I can find some ,but other not.That's I think when PC start and if I can stop/PAUSE the boot process using some key combination I note and after I cancel "PAUSE" and PC continue the booting process.
View 4 Replies View Relatedi used sle11 before.my brother makes it's bootscreen diffrent like walking penguins on the screen.can i make the same thing on opensuse 11.4?
View 9 Replies View RelatedI have a repeatable and annoying problem that seems to be connected with the graphics card driver of nvidea. I had another card before (7900 card) and I have after having had a malfunction now a nvidea 430. Mainboard Gygabyte with AMD 790 Chipset, GB Ram. The opensuse system is fully patched and updated, newest kernel but the same error occurred with another graphic card and with the precedent kernel and with the precedent nvidia video driver.
Now, the problem is as follows:
System is dual boot with options:
openSUSE 11.4 64 bit
[code]...