Ubuntu :: 10.10, Boot Up Freezes At The Login Screen?
Mar 30, 2011
i start up the computer, it loads, it arrives to a screen that says the laptops name, and a bar at the bottum. I can interact with this bar, it is blank and has a picture of a little man with a circle. Clicking on this does nothing, another says shutdown and reset, again clicking on it does nothing. I think the error occured when the computer got unplugged while updating.now before we get into all this GRUB and fancy stuff. I am completely new to linux. I installed this using a cd made from an iso image downloaded from the site. I did not use a windows loader. I don't even have windows anymore. I have all my personal information and data on here and would like it to be restored.I googled it and it says to go to recovery mode using GRUB, don't know how and don't know what grub is.:confus ed:
View 3 Replies
ADVERTISEMENT
Mar 22, 2011
I've had Ubuntu for months but now it freezes at the login screen. I've written what I did when I last used Ubuntu in a post below. (like undo the xorg upgrades?)
View 3 Replies
View Related
Jul 8, 2010
I just updated my netbook remix 9.10 to 10.04 and every time I boot up it freezes as soon as the login screen pops up. Before this said screen pops up I have the ability to move the cursor around freely, and if I mash the life out of enter I can get it to select my username, but freezes before the password entry bar has the chance to come up under it.
View 1 Replies
View Related
Apr 30, 2011
I just upgraded to 11.04. When I rebooted, everything looked normal. When it asked for my login credentials, it froze. I've tried recovery mode during grub selection, but no luck. I want to try 11.04!
View 4 Replies
View Related
Apr 29, 2011
As the title suggests, I am running Ubuntu inside a VMWare environment. I did the upgrade to narwhal and I see the boot-up screen just fine but when I get to the screen to log in to my Ubuntu account this is where Ubuntu freezes up completely and I get nothing out of it at all. I do have VMWare upgraded to the latest version that is available as well.
View 2 Replies
View Related
Jul 1, 2010
I installed openSUSE 11.2 on my Compaq 2170US laptop. When I select it from the grub menu, everything acts normally until the login screen, which freezes immediately (i.e. before I can select my user account or type in my password).I installed from the full openSUSE DVD and chose the GNOME desktop. Before installing, I took openSUSE for a test drive with the GNOME LiveCD and everything seemed to work fine.
View 4 Replies
View Related
Dec 9, 2009
I have an odd problem - that I'm having difficulty tracking down the cause!
Since upgrading F12 I have had varying levels of success booting in. Let me explain.
1. Boot
2. Plymouth graphic progresses
3. Freezes at GDM/login screen - Mouse freezes and Keyboard lights flash
4. Hard Reset with pushed in power button
5. Repeat with different kernel - usually the same result (the only exception appears to be 2.6.31.5-127.fc12.i686 kernel - this appears to have a better boot success than the other kernels listed)
In particular the .PAE kernels do not boot AT ALL ( this includes the 6-145 and 6-162 kernels). However the .PAE kernels did work on F11!
ABRT does seem to capture the following kerneloops (url very frequently (yes I do return them to kerneloops)
BUT on reviewing the /var/log/messages file they don't appear to coincide with these boot failures times!
View 2 Replies
View Related
Jun 3, 2011
i am having a boot problem with opensuse.i installed a theme named suse-elegant under personal settings(configure desktop)-system administration-login screen.
i had also added vbox users(i ticked vboxusers) under yast-security and users-user and group management-edit-details to make virtual box work.
i want to check that installed theme so i restarted my laptop.after the restart opensuse taking too long time to boot
note:the login theme also not working.
after the boot i restored defaults in login screen themes.it is also not working.
i don't know which cause this problem(vboxusers or login theme).i am also seeing a root user has been added in my login area.i tried opensuse failsafe also.
View 5 Replies
View Related
Apr 15, 2010
So my Dell latitude E6400 running fedora 12 (2.6.32.11-99.fc12.i686.PAE) is usually connected to a big screen (1920x1200).
Now each time I boot, X becomes unresponsive shortly before or after login for a couple of minutes, and then goes back to normal. This happens both with and without connection to the big screen.
The error messages associated to this seem to be like this, my /var/log/Xorg.0.log is cluttered with them :
Code:
I normally start my computer in the morning, walk off for some tea, and come back when X is functioning, but when I'm in a hurry it's pretty, or very, annoying ... drinking tea / coffee to wait for a computer to start is something people did in the 90s, it shouldn't be default behaviour in 2010 ...
View 11 Replies
View Related
Oct 1, 2010
I am using Ubuntu 10.04.1 and I run it 24 hours a day. Recently one morning I went to my laptop and opened the screen but the login screen wouldn't appear. Anytime the cursor appeared, HDD activity would go to 100%. I'm assuming this because the HDD light on my laptop was permanently on. So I made the dumb decision of just holding the power button down and turning it off. When I turned it back on, I noticed it came to a command prompt type screen listing "initramfs" at the bottom apparently wanting me to input a command. I did a lot of research and couldn't find much of anything that would help me. I read about GRUB, superblocks, fsck, e2fsck, etc.. . I tried all of those and nothing has worked so far. Any ideas? I did notice one thing. When I went into the actual install with the livecd, it told me the drive was /dev/sda5, but in Disk Utility on the livecd, it told me it was /dev/sda1
View 9 Replies
View Related
Feb 14, 2010
I set up a dual boot on my laptop a few days ago, between Windows XP and Ubuntu 9.10 (installed from Live CD). All the hardware is working fine.
Anyway, SOMEtimes, during the splash screen , the screen turns off (physically turns off) and the hard disk seems to stop. I cant do anything appart from force it to power down.
Yet sometimes, it boots up fine.
I want Ubuntu to work first time EVERY time.
View 3 Replies
View Related
Jul 17, 2011
Every once in a while when I turn on my computer it freezes on the purple screen after the screen where you choose the operating system. When this happens the keyboard doesn't work and I have to hold the power button. Also I think this might be connected to the problem I had when I was running ubuntu from the live cd, which was freezing after choosing the option of "trying" the OS before installing. I'm using an HP Dv7-3112sa and am running the default 64bit ubuntu from the website.
View 6 Replies
View Related
Jul 24, 2011
i used to have 9.10 but now upgraded to the latest version. Back then I changed the background to full black for both the preboot screen and login screen.Now after upgrading it changed it to the purple color screen. I am wondering how I can change back the background color?
View 1 Replies
View Related
Dec 27, 2010
I'm a bit of a Linux novice but have taken the plunge and got a old Dell machine set up with Fedora 13, it works fine for the most part. If I can get it to boot. Whenever I start it up the tri-color boot bars go across the screen but seem to freeze at various times. Sometimes right as its getting started, other times it will go all the way across but never actually do anything. I can sometimes get it to work if I get into GRUB and try a different kernel version. Is there anyway to pull up a more informative boot screen or some other way of figuring out whats causing the freeze instead of just watching the progress bar?
View 5 Replies
View Related
Jun 29, 2010
When I try booting my computer under Ubuntu, it freezes whenever it gets to the part of the purple loading screen (with the Ubuntu logo and the red/white dots indicator). I won't load any further, but I can still turn it off by pressing the power button. Has someone else got this problem? Ubuntu was my main partition, and I don't have any practical way to make a hard install.
View 3 Replies
View Related
Dec 8, 2010
Ok, so I just finished correcting my driver issue with my wireless card when I'm struck with another problem....after gaining access to the net and updating my packages, ubuntu fails to boot up. It freezes at the boot screen where it runs the 5 orange dots with the ubuntu logo.
View 1 Replies
View Related
Jun 8, 2015
I am attempting to get Debian+Mate running on my laptop, with no success. I have not yet used Linux, but I do wish to climb out of the Window, and the Live session seems ideal to get a feel for Debian before finally abandoning Windows.
I got the Debian+Mate ISO file from the Debian website, and created a bootable USB stick. (Note : I have done this several times, getting new ISOs, and using Unetbootin, Universal USB Installer, and Linux Live installer; the result is always the same.)
When I boot the USB drive, all appears good at first. I get to the Debian (or Mate?) screen which is a pale jade green with a white squiggle in the middle region, with a panel at the top; this shows at left three options - applications, places, and system; and at right the correct time, a sound symbol,the wifi symbol, and a battery indicator. At the left of the screen in vertical arrangement there are 4 icons labelled computer, users home, install Debian Sid, and trash. On the bottom panel, at left there is a "button" for "click to hide all windows & show desktop", and at right 4 squares for workspaces.
There are also (temporary) windows that inform me that the battery is no good (I run on mains), and that there is no wifi connection established. These windows disappear in a minute or so.
The cursor moves ok. The only actions that it creates are the information drop-down texts that tell me what the headings mean - e.g. no connections when I hover the cursor above the wifi connections symbol.
But whatever I attempt to do - selecting any of the options - nothing happens. Everything except the cursor appears to be dead.
The machine that I am using is an old laptop that I use as a second computer. It has a SIS Mirage 3 graphics engine, which I gather may be a problem. I also tried the same procedure with my fairly modern ASUS laptop (NVidia graphics) with exactly the same results; it seems that NVidia graphics may also be problematic, judging from some posts on the web. I have also tried Debian+Cinnamon, again with the same outcome.
View 5 Replies
View Related
Apr 6, 2011
I installed Slackware 13.1 a little bit ago, played around with it, performed an upgrade with Slackpkg, messed around with some settings, and chose a new theme. I had set the runlevel to 4 and when I rebooted after choosing a new login theme the screen just went black at the point where the login prompt should have appeared. I couldn't even get into the CLI. Using a LiveCD, I set the run level to 3 again and was able to log in, but when I try to start X the screen goes black and freezes again, so I believe my new login theme is the culprit. Is there a way to change to the default login theme from the CLI?
View 14 Replies
View Related
Aug 16, 2011
When I installed Kubuntu 11.04 using Wubi it did not load the Ubiquity installer like it normally does. Instead the boot screen (image attached so you know what I mean) remains displayed for the entire installation. The installation works fine once installed but I was wondering if this is normal or not?
View 2 Replies
View Related
Mar 12, 2009
Tried the DVD install for 10. Install went fine other than it take for freakin ever, but after an 1 hour install, the update wanted to install 1675 or so updates. I let those updates install. 5 hours later the updates were done. Rebooted and now it freezes at a blank screen right after the 3 scrolling bars. System is older AMD 3000+, 1 GIG RAM with NVidia 5700 video card.
I did try and search some. But the only thing I could find was something about editing my grub file for a scan=sync setting (the information was basically gibberish to me. No clue what it was talking about or how I would edit a file on a system that won't boot). I tried to recover mode off the live CD. It had some options that said you could type Linux command line arguments, but whenever it got to the sysimage it says Linux isn't a command.
View 2 Replies
View Related
Apr 17, 2011
I noticed that after making my build in suse studio my system freezes immediately after GRUB ( Normal or Failsafe) boot splash screen. I also noticed that this happens only with the specified kernel below. I'm not sure when using Kernel 2.6.37, one had the same problem. I never used it. The original kernel 2.6.34 had no problems such as the one I have described. My systems has no further problems only that it takes several restarts to go past the "Freeze". Below is a list of my system specs:
openSUSE 11.3
Kernel-pae 2.6.38.2-4.1 from Kernel Stable.
GRUB 0.97-174.1 from openSUSE 11.4
Upstart 0.6.5-33.1
xorg-x11-server 7.6_1.9.3-142.1 from X11:xorg 11.3 repo.
The GRUB from openSUSE 11.4 has been very stable and non-problematic. I will be buying an Intel core i5-2500K in a few months that's why I need the latest kernel and XOrg-X11-server. What could be causing the freezing?
View 6 Replies
View Related
Dec 4, 2010
I'd like to install Fedora 14 64bit as a dual boot on an existing win 7 32bit system. When I boot with the Live CD, after selecting "boot" in the Fedora boot selection menu, I get a grey screen with a white cursor, and the system freezes. I checked the Live CD on my laptop and it worked perfectly.
My System:
MotherboardASUS P5Q DELUXE
CPUIntel Core 2 Duo E6750, 2,66 GHz, Sockel 775
[code]...
View 3 Replies
View Related
Apr 12, 2011
My last setup (years ago) ran fluxbox so because it was familiar I installed it as a secondary to xfce right off the bat. I download a lot of different stuff because I like to try out all the apps I can find but somewhere I broke something. I can still run fluxbox fine, but nither the Xubuntu nor Xfce sessions will run now. Last thing I remember changing was pulse audio(removed it for an experiment I was trying with jack audio), not sure if it is connected but when I try to login to xfce the screen goes black, flickers a few times then it brings me back to the login screen.
I tried failsafe but everytime I do my monitor gives me a "frequency out of range" error. I tried purging and reinstalling xubuntu desktop and xfce settings but I am thinking its my xorg config. My laptop is a Toshiba satellite M305D-s4830 with ATI Radeon 3100 mobile graphics card and I am running Xubuntu 10.10. Unfortunately I also broke the screen, so right now I am stuck with an external monitor till I get a new one.
View 1 Replies
View Related
Sep 12, 2010
ok i have made this script to do an automated remote rsync of my windows machine. I have my router set to wake my server up every monday at 10:00amI want to then have this script run when the computer hits the login screen.... However I only want it to run on that specific day.how would i have it do this. It needs to just rsync to my users home directory.My thoughts: have the script check the day and if it is the right day it executes.
View 4 Replies
View Related
Jul 9, 2011
i installed macbuntu a few months ago which changed the bootup screen and also the login screen. i have tried uninstalling macbuntu but i still have the macbuntu boot screen and login screen. i wish to reset these to the default screens but cant find out how.
View 1 Replies
View Related
Jan 11, 2010
I don't know what caused it, but as I boot into Ubuntu (9.10), the login screen never appears. Boot splash shows,then the cursor shows up but never the login screen. I haven't found anything that will reset the default gdm or login screen that works.
View 2 Replies
View Related
Mar 9, 2010
I have a dual boot configuration (WinXp and Ubuntu 9.10) on a PC (my video card is an ATI Radeon 4850), i have been configuring ubuntu for the past 5 days and everything was working fine. Today i installed Screenlets (through synaptic manager), and i was adding a screenlet when the screen froze. I could move the cursor, but couldn't click anything. I left it for about 5 minutes to see if anything changes, and since it was still frozen, i did a hard reset (restart from the button).
In the grub menu i chose the normal linux boot (not the recovery mode), it loads up the welcome splash screen (with the tribal sound and the bar moving), and then the little circle cursor appears, turns into the normal arrow cursor and it hangs. I can move the cursor, but the screen is stuck with the ubuntu splash screen.I restarted (again from the button) and went into recovery mode, but in the recovery console i can't select any option from the keyboard (i tried hitting the cursor keys, enter, nothing happens). I hit ctrl+alt+delete and it restarted the system (so the keyborad does function). In XP i found a recommendation to restart the Xserver, so i rebooted in the Ubuntu splash screen, hit ctrl+alt+F2, logged in, typed the command i found:
sudo dpkg-reconfigure -phigh xserver-xorgrestarted (sudo reboot), and got to the splash screen, which after playing the tribal sounds, turned semi-transparent (i could see the desktop wallpaper, taskbars and a black rectangle where my cairo-dock should appear), but again it freezed, no cursor. I hit ctrl+alt+F2 to go into console mode, and uninstalled screenlets (since it was the last thing i installed before the initial freeze).Screenlets uninstalled properly (i used sudo apt-get remove screenlets) so i rebooted, but it still freezes at the ubuntu screen splash (this time it wasn't transparent, just the standard screen splash). So i tried getting into console mode again, but this time my screen displays lines in a lot of colors, randomly (probably a failure from the video adapter)
View 2 Replies
View Related
Mar 13, 2010
I have used the below command to do that successfully for the previous version of ububunt, but this time I failed to do that with Ubuntu 9.10. I know I can do that manually by "sudo /etc/init.d/gdm stop" command. I try to change the name of /etc/init.d/gdm files, but the problem still exist.m"sudo update-rc.d -f gdm remove"
View 3 Replies
View Related
Mar 24, 2010
Ive been using it for a few days and it kept reminding me to update some files. (about 200mb worth) after it finished installing i rebooted but it won't show me a login screen. it only shows me a commmand line. it allows to 'exit' and then it boots windows.
View 9 Replies
View Related
Mar 21, 2011
I so like the Karmic Koala's login and boot screen (named chocolate?) and I want to use it instead of the default login and boot screen of my Maverick Meerkat. Is there a way to do that? How?
View 2 Replies
View Related
