When I boot I occasionally get a screen text. Always different. After unplugging everything and waiting for 30minutes I can but again. I think it has to do with my USB-HDDs both which are buffulo external disk drives. what causes this and how to fix it?
View 1 RepliesWhen I try booting my computer under Ubuntu, it freezes whenever it gets to the part of the purple loading screen (with the Ubuntu logo and the red/white dots indicator). I won't load any further, but I can still turn it off by pressing the power button. Has someone else got this problem? Ubuntu was my main partition, and I don't have any practical way to make a hard install.
View 3 Replies View RelatedI just finished a fresh install of Lucid netbook remix on my new Sony Vaio netbook. Everything seemed to go fine until a restart was required after installation was complete, when the monitor went black and the netbook just hung. The only way I could restart was to manually power off and on again. The installation seems to have completed fine and everything works after boot up. However, the netbook continues to freeze if I select restart from the power options. I know its not critical, but it is annoying. Does anyone have any ideas on how to solve this?
View 2 Replies View RelatedRunning fine for a couple of weeks now, my Ubuntu Lucid install on a Sony laptop Vaio VGN-N21E went through some updates an hour ago. After the updates were installed, I shut the laptop down. The shutdown was slow but graceful with no errors. Now, when I try and power back on, I get errors about CIFS stating that the network share I map to could not connect. Also, that the network could not connect. I usually connect wirelessly and had no problems until now. It lets me log in but freezes after I see my desktop. No cursor or keyboard response...no response to CTRL+ALT+DEL...I can only manually force shutdown....
View 9 Replies View RelatedI'm trying to install Lucid to an older PC, but it constantly freezes during the setup. Most of the time I can't even select whether I want to install or to try the OS, but sometimes I get past that. Once I got to the point where the installation was copying the files to the hard drive, but it froze once again at 5%. The PC's config is: 1,8 GHz AMD processor, 768 MB DDR1 memory, 200 GB HDD, ATI 9200 VGA and a DVD drive. According to the minimum reqs for lucid this should be more than enough, yet Lucid froze once while in Live CD mode. Should I try an older ubuntu version? Or could this be something more serious, ie hardware issue in which case you guys can't help.
View 6 Replies View RelatedI have the issue described in [URL]... Workaround A allows me to boot, but to make changes permanent, the above suggests I run the following command: echo options i915 modeset=1 | sudo tee /etc/modprobe.d/i915-kms.conf sudo update-initramfs -u But when I do this I am told that the 'u' parameter does not exist in tee. There are only 'a' or 'i' parameters.
View 2 Replies View Relatedexperiencing a lot of desktop freezes on Lucid. it goes fine for a while then i cannot minimize or maximize Sometimes i can open a new window from the top but often not
View 9 Replies View Related1st post @ LQ. Ubuntu user since 2007ish. Lots of PC experience... now vexed by upgrade from 9.10 Karmic to 10.04LTS Lucid.
The problem: random freezes whenever I boot into Lucid as user through usual Grub menu. The freeze sequence is: 1- screen stops, 2- mouse pointer freeze w/ no effect on click but moves freely and keyboard is useless, 3- screen blacks out for about 30 seconds and then returns but is unusable and 4- constant HDD activity for about 5-10 seconds. I have waited several minutes for a recovery of some sort but no dice. I reboot via on/off or reset button. Ubu deletes 2 inodes and then I'm off and running again.
If I boot through the recovery console there are no problems at all. The recovery console sequence: 1- select recovery from Grub menu, 2- at recovery menu select drop to root command prompt, 3- give root password, 4- enter 'gdm' at console prompt, finish boot up in my only user desktop (not root.)
I have not been able to find any log files that show an error message, but I'm not so tech oriented that I would necessarily know one if I saw one. Through many hours of browsing posts describing Lucid problems @ UbuntuForums (one of which has over 1,000 responses) I have found my '.xsession-errors' file (attached) is full of data.code...
I'm running Ubuntu 10.04 Lucid Lynx Desktop Edition and most of the time I get these random freezes and then I have to turn off my computer and reboot it back on. It's getting really annoying because I am constantly downloading huge packs of data and it freezes and then I have to start re downloading...
View 2 Replies View RelatedI've got an atheros ar9287 based card with the ath9k driver from the base install of lucid and I installed a compat wireless patch via this thread: [URL]... to fix the issue of the card being stuck on a given channel when using aircrack. Now, my system freezes up after about a minute or two. If I leave the wireless card off, everything runs fine no problem. I uninstalled the compat wireless driver via the readme just make uninstall in the compat-wireless folder, but I still get the freezes. So I assume it has something to do with the patches. I have no idea how to remove the patches. Can anyone help me with this or is there a way to get everything up and running so the original problem of being stuck on a channel is fixed?
View 3 Replies View RelatedI have not seen a fix posted yet. I am running Lucid standard Ubuntu on 1000HA with Intel GMA 950 graphics. I periodically have keyboard and mouse freezes. It seems turning off visual effects decreases the frequency of the problem but does not solve it. I turned on the keyboard map of control-alt-backspace and I am able to restart x when it freezes. I am running kernel 2.6.32-22-generic which if I read things correctly includes fixes for x memory leaks.
View 6 Replies View RelatedAfter a fresh install of Lucid I found this error on my screen "the panel encountered a problem while loading "OAFIID:GNOME_NetstatusApplet" do you want to delete it?" I kept pressing no and having a completely worthless system. The programs were all opening in the left corner with no controls to move or close them.
View 1 Replies View RelatedI deleted 2 ubuntu partitions using Vista's manager, and expanded the unallocated space in to the Vista partition. when I restarted a screen came up saying error: no such partition grub rescue> Is there any way I can fix this ( by deleting grub, or something...)
View 3 Replies View RelatedA friend of mine told me about Ubuntu, so I thought I would try it. I put it on a USB Flash Drive to boot on startup. It brings me to a menu where it tells me to start Ubuntu from the flash drive, Install it on my HD, etc... And if i try to run off USB or Install to HD, it runs through the start-up (runs the files) and then goes to a black screen and stays there. I had it setting for an hour and nothing happened. I have the AMD64 iso. I have also tried the windows installer, and same cenario.
View 9 Replies View RelatedIt gets stuck on the boot screen with the status bar, or on the loggin screen. The only solution is to reset. After that it is usually fine for the day and will reboot fine, it's a dual boot and my boys use windos on it a couple times a day also, that's why it's getting rebooted so much.
Any possible reasons for this? Or, how can I kill the boot image and get a text based boot screen? I tried Startupmanager, but it doesn't seem to work on 9.10.
I've just done a clean install of 10.4.1 onto a Compaq Pressario Desktop, which earlier had 8.04, upgraded online to 10.04.1.Repartitioned and installed from an iso disc, checked for Md5sum.All seemed to go as per text book, but when the system starts there is a momentary error message"no suitable mode""no command terminal found"It then proceeds to show the default purple hazy background, but stops there, with no other parts of the normal desktop, icons etc .After about three minutes, it goes black, and if I then hit the enter key, or move the mouse, it displays the log in window and asks for my password.I enter this, and again it reverts to the purple haze.This cycle repeats.I've checked the boot order to boot from the hdd first, so I'm stumped as to what to try next, apart from going through the whole install process again
View 9 Replies View RelatedAfter a hardware freeze, my system boots directly into the Ubuntu screen with 5 dots and hangs. Booting into recovery mode loads the tools menu then freezes before I select anything. The system still boots and runs windows 7 from the same hard disk just fine. I've booted a live cd and run file system check on my ext4 partition and it says it's clean. I can mount the volumes and read the data, just can't get the os to boot.Any suggestions before I backup and reformat?
View 1 Replies View RelatedI upgraded from Ubuntu 10.10 to 11.04. I worked out all the screen changes etc it hasn't missed a beat until now after a week of usage it freezes during bootup it gets as far as the introductory melody then freezes. It sounds as if it goes into a loop during playing the tune. I'm involved in an anti-malaria project if I can't solve this I've lost research data which will take time to recalculate. If all else fails Ill go back to 10.10. I'm using a different computer for this post driven by Vista
View 4 Replies View RelatedI was trying to restart the X server with sudo /etc/init.d/gdm restart, and doing so brought me to a black screen with some messages I don't remember, and left me hanging like that. So I had to do a hard reboot. So now when booting I get to the ubuntu logo on the purple background and it just hangs like that. Doesn't accept keyboard input, I can't alt+d or ctrl+alt+f2. I edited the ubuntu line in the grub menu and removed quiet but that didn't do anything. How do I diagnose this?
View 1 Replies View RelatedI have been getting squashfs errors in the live usb created by various means(unetbootin,usbcreater,pendrive linux software).
There seems to be no error in my media or my hw. I have tried both 32 and 64 bit versions and the md5 sums of both match with the hashes given online. I havent yet tested with a compact disk, but i am sure the hw is working fine (it just booted 9.04 from usb..)
I have tried a few boot options [URL] to no avail. Also by turning off the quiet mode during boot, I see that the a few errors are "Unable to read from /dev/sdb" which should be the usb drive itself.
I will try a CD now, but my cd drive is not working. I hope to get a usb drive and boot from it.
I tried to test Ubuntu on my dekstop, an HP Pavilion a6223w with an ATI Radeon HD 2400 but as soon as the live CD reaches the desktop, it hangs, no errors, and from what I can tell it isn't running on any restricted drivers. Is ubuntu not compatible with my PC or something? Here's my full spec's:
AMD Athlon 64 x2 5200+ 2.6GHZ
ECS Nettle2 Mobo with Nvidia nforce 4 chipset and Nvidia 6150SE integrated graphics
3GBs DDR2 5300 RAM @ 667 mhz
500GB Sata HD 7200rpm
ATI Radeon HD 2400 Pro PCIe x16
HP Multimedia Keyboard and Logitech USB Optical Mouse
Realtek Onboard HD Audio
I tested it with the latest version of Ubuntu (9.10)
Since I know there's a lot of support threads going, I wouldn't ask unless I was really stumped and couldn't google. I'll get right to it.
10.04 fresh installed fine, working, few reboots, all good. Installed Nvidia 195 drivers. Not so good, still works fine, but framerates not as good as the 190 drivers I'd been using with karmic. So I installed nvidia-glx-190 and nvidia-190-modaliases with the nvidia PPA for jaunty. They didn't appear on the restricted drivers list, I rebooted in the hope they would, and now my boot process is as follows.
Boot, met with a blinking _
Goes blank
Another blinking _
Green static appears momentarily, then very fast the Ubuntu splash appears, the white orbs all turn orange, and there it hangs. The splash itself is in the wrong resolution.
Everything is the same as when it was working except it didn't totally freeze at the end. It responds to nothing except the power button (and sometimes not), I can't access a shell or the grub menu at any stage during the boot process like I usually would, and nothing in the boot log seems out of the ordinary.
What should I do? I'm on a LiveCD desktop, got the harddrive mounted.
Macbook pro 4,1, 2GB ram, Core2duo with Nvidia Geforce 8600GT
Im running desktop dual boot system with two hard drives, one with Windows XP and the other with Ubuntu. Ive had no problems with this until now when I upgraded from Hardy to Lucid. Now I have problems with the system freezing on boot up.
Sometimes it will boot just fine, and at other times it will freeze before the login screen appears. When it does freeze, there are flashing lights on the keyboard and the floppy disk light (yes, its an old computer) is lit constantly. The only thing I can do is switch the computer off and hope it will boot up properly the next time.
When I did the upgrade there were a couple of files where the program asked if I wanted to keep the custom file or overwrite it with the maintainers file and I chose to keep the custom one. I THINK one of them might have been GRUB, but Im not sure.
Has anyone had a similar experience and were you able to cure it? I have seen a thread where people have had the system freeze on them, but Im not sure its QUITE the same thing.
Ive also done a clean install with Lucid on my laptop and have had no problems. The laptop is only running Ubuntu.
Im also wondering if reinstalling Grub on my desktop would solve the problem.
a. If so, would it still show both operating systems?
b. How do you do it?
I come from the French Ubuntu community (ubuntu-fr.org). When I start or reboot my computer, it crashes (freezes) after the grub menu if the external drive is connected and turned on. Subsequently, I have no problem with the external hard drive. The HDD is formated in NTFS, no boot loader, no OS installed on.
View 9 Replies View Relatedi start up the computer, it loads, it arrives to a screen that says the laptops name, and a bar at the bottum. I can interact with this bar, it is blank and has a picture of a little man with a circle. Clicking on this does nothing, another says shutdown and reset, again clicking on it does nothing. I think the error occured when the computer got unplugged while updating.now before we get into all this GRUB and fancy stuff. I am completely new to linux. I installed this using a cd made from an iso image downloaded from the site. I did not use a windows loader. I don't even have windows anymore. I have all my personal information and data on here and would like it to be restored.I googled it and it says to go to recovery mode using GRUB, don't know how and don't know what grub is.:confus ed:
View 3 Replies View RelatedInstalled fc12 on a pentium 4 - 3.2 gig cpu, 2 gig mem, 6 gig root, 2 gig swap and 12 gig home.
Install completed and on reboot it freezes near end of boot process. Install disk is good, install worked on a laptop.
How do I find the cause of the freeze?
I set up a dual boot on my laptop a few days ago, between Windows XP and Ubuntu 9.10 (installed from Live CD). All the hardware is working fine.
Anyway, SOMEtimes, during the splash screen , the screen turns off (physically turns off) and the hard disk seems to stop. I cant do anything appart from force it to power down.
Yet sometimes, it boots up fine.
I want Ubuntu to work first time EVERY time.
I'm a long time reader, first time writer. I have a question. I've been trying to do a dual boot with XP Pro SP2 and Ubuntu 9.10. When I setup everything and try to pick which OS I want to load, the GRUB freezes and won't boot/let me select anything else. I have to turn it off and then back on to only select Ubuntu or let the time run out to automatically select Ubuntu. I've got a Compaq Presario 2105 w/80gb HDD, 433.2MiB, and an AMD Athlon XP 1800+ Processor.
View 1 Replies View RelatedI've just updated (through Update Manager) to the latest Linux kernel, (2.6.32-23, I believe) and now Ubuntu will not boot to the desktop.
It gets as far as finishing fsck on all of the drives, and successfully completes checks if necessary, but after that it just comes to a halt and won't proceed any further.
The last messages on screen when it freezes are (ignoring the fsck success reports):
init: ureadahead-other main process (954) terminated with status 4
init: ureadahead-other main process (959) terminated with status 4
init: ureadahead-other main process (970) terminated with status 4
These messages were appearing before, though.
The only way I seem to be able to boot now is by selecting the previous kernel (2.6.32-22) in GRUB.
Is anyone else seeing this, and does anyone know how to fix this Ubuntu update problem?
I have been battling this issues for about a year now. Kind of got tired of dealing with it, but inevitably I go away for vacation or something and I lose power at the fort then the system will not come back up on its own.
Every time (100%) I power my system on with the single USB cable connected to it, my system hangs. It did it on 8.x, 9.x and all versions of 10.x. I have asked the questions before, but never get anywhere with it. Finally I have found this Forum and figured out how to ask questions Weird, I know
Anyway.
The system goes through the BIOS check and gets to the GRUB loader. If I do nothing, it hangs with a black screen just after it says that it is loading the kernel.
If I change the kernel commands to include the noacpi=apic or most other common fixes for what I have been told, USB, I get to the same place seemingly.
In reading through the forums and a little testing, I find that if I remove the splash and the quiet commands (obviously snicker), I am able to see where it is really stopping, but does not make sense to me.
The last informational text that appears to be processed is one of
Registered Protocol Family 1
There is nothing in the SYSLOG, MESSAGES or DMESG at all for this boot. I would assume that the system is not to a point where we can log this data
This is an AMD Phenom II x4 running 10.04 64bit Ubuntu. The USB connected device is an Avocent KVM 4 port with Audio and USB.