Ubuntu Installation :: Lucid Purple Screen Blocks Recovery Mode?
Jun 12, 2010
I have a problem, so I boot in recovery mode. The Recovery Mode menu comes up, but when I press a cursor key, the purple Ubuntu screen comes up. I cannot get to the menu items that I need!
The recovery mode is supposed to provide a failsafe text-only environment.
Does anyone know what app puts up the purple screen?
I would really like to remove it. I tried to install xdm, which I prefer, but keep running into the purple screen. - With XDM installed, the purple screen comes up and blocks you from seeing anything. Fortunately, remote login by RDP still works. - If you switch console (CTRL+ALT+Fn) back and forth a few times, the purple screen appears again. You have to go to a new console (F8 or even F9 instead of F7) and begin a new Gnome session. Eventually you run out of function keys...
Perhaps I'm using the wrong distribution. Ubuntu is friendly, but you pretty much have to use it exactly as it installs. Can someone recommend a distribution that puts more emphasis on stability?
View 1 Replies
ADVERTISEMENT
May 1, 2010
i feel like i should be on the payroll if I have to work so hard and long to get these things working. (ranting stopped, for now) I have ATI Mobility Radeon HD 4330 GPU in my Dell Zino system and finished the upgrade from 9.10 to 10.04 LTS and got the purple screen of death. tried the intel recommended fixes but got nothing. I cant even get into recovery mode.
View 3 Replies
View Related
May 5, 2010
I cannot install Ubuntu 10.04, or even boot into the live CD. I'm not an expert, but I've used Ubuntu for several years, and I'm pretty sure I'm not doing anything stupid... Here's what happens when I boot with the Ubuntu 10.04 live CD: I get a purple screen with just an accessibility(?) symbol at the bottom (this lasts 15 seconds). The screen goes black, with a flashing cursor, then changes back to purple, this time with an Ubuntu logo, with 5 dots acting as a progress indicator (this lasts about 1 minute). The screen switches to standby. The CD drive continues to make noises for another minute or so, then stops.
I physically removed my graphics card (ATI Radeon HD 5770), and plugged the monitor straight into the VGA port on the motherboard. Now the CD boots up fine. I could try installing Ubuntu at this point, while my graphics card is unplugged, and then plug my graphics card back in, and see if it starts working then.
View 9 Replies
View Related
Jun 3, 2010
I upgraded from 9.10 to 10.04 2 weeks ago. After a day or so I suddenly couldn't logon anymore. The pc boots, I get the userlist and can enter my username and password, then the userchooser dissappears but the background stays purple and nothing happens anymore. I can still move the mouse and switch to text console but I don't get my desktop. This happens for any user even a new user I created from the command line just to test this. In the end I assumed I messed something up during the upgrade and reinstalled the pc from scratch using Ubuntu 10.04 32-bit.
I was happy for almost 2 weeks but now suddenly I get exactly the same problem. No matter which user account I try I just can't logon (graphically) anymore. Rebooting the system doesn't help. When I run top on a text console I don't see anything hogging the cpu. There is nothing obvious blocking anything. I can't find any clue in /var/log/* or ~/.xsession-errors. I can logon still in text mode as a regular user, my homedir is there, everything looks ok. 1 thing I did notice is that a (few) boots before this started happening autofs suddenly didn't start anymore at boot time (my homedir is mounted from a NAS via NFS). I had to manually start autofs as root to be able to get to my homedir. However this seems to be ok now, automount is running and my homedirs are available. I tried making a new user with a local account just to rule out network issues but even this user can't logon. So the automount issue may be totally unrelated.
View 1 Replies
View Related
Jun 29, 2010
When I try booting my computer under Ubuntu, it freezes whenever it gets to the part of the purple loading screen (with the Ubuntu logo and the red/white dots indicator). I won't load any further, but I can still turn it off by pressing the power button. Has someone else got this problem? Ubuntu was my main partition, and I don't have any practical way to make a hard install.
View 3 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
Jan 5, 2010
i'm a recent convert from windows and my first few days with this os have been great. to think i've been living in the dark all this time...
anyway, my question is about the boot screen in bios. normally it booted up thusly:
ubuntu-linux generic [...]
ubuntu-linux generic [...] (recovery)
memory thing
windows xp
but today, the boot screen showed two instances of ubuntu generic, its recovery mode, and the memory thing (i forget what it's called exactly. do you know what i mean?). i installed the os only once.
View 2 Replies
View Related
Oct 25, 2010
I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710
View 2 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Aug 18, 2010
I've got a, as it seems to me, strange problem.I've inadvertently deleted my user from the group admin so I'm in the same situation of a lot of other users (read a lot of messages about it).My problem is that when restarted in recovery mode there is no way I can choose the 'drop to the root shell' or similar in the menu.The menu appears for a second and then I've got an empty screen. If I press a key I've been requested for a username and password that of course is not what I need.
View 2 Replies
View Related
May 4, 2010
recovering a partial upgrade to Lucid.
4 core Xeon , was running 64 bit 9.10.
Upgrading over the weekend, but it failed, and suggested running dpkg-reconfigure -a
I couldn't launch any terminal/xterm windows, and couldn't login via ssh (kicked me out with xmalloc failure) or through a virtual console (showed garbled characters)
So I had to reboot.
Now the boot process -- I've tried recovery mode for all othe kernels I've got installed, but all fail in the same way:
Code:
Begin: Starting AppArmor profiles...
bash: xmalloc: ../bash/locale.c:73: cannot allotate 225469542417 bytes (0 bytes allocated)
Failure: AppArmor profiles failed to load.
[Code]....
It looks like it might be a libc problem. At any rate, I'd like to get into a recovery console to restart the update.
View 4 Replies
View Related
May 1, 2010
I've installed almost every version of ubuntu so far and four different versions on this computer, and I've never had a problem with the installation cd. The install cd on this new version however gives me only a purple screen of death with a white line down the middle. What is going on? The ubuntu-10.04-desktop-i386.iso file's md5sum is fine. I've burned it successfully on two different discs and still I can't install it. I've got a Dell 6400 with an nvidia geForce 7300 video card.
View 9 Replies
View Related
May 5, 2010
My problem is with the new Ubuntu 10.04 Installer, and the Plymouth Bootloader.
I have installed Ubuntu plenty of times before on my hardware setup, so 10.04 shouldn't be significantly different, however I can't seem to get it to go past the purple screen with the red dots.
If i let it sit there for a while, then press an arrow key, it takes me to the text which is as follows:
Code:
(process:404) : GLib-WARNING **: getpwuid_r(): failed due to unknown user(0)
unable to open '/dev/mapper/nvidia_afgjfcea'
unable to open '/dev/sda'
unable to open '/dev/sdb'
[Code]....
View 9 Replies
View Related
Jun 7, 2011
I installed Ubuntu 10.04 32 bit on an Acer Aspire 7520 laptop running Vista.Thereafter, Vista could only be run via the "Windows Recovery Environment" grub menu option, which is on /dev/sda2. However, within Vista than the wireless network is not functioning any more. It has given lot of headaches to find a way out. Unsuccessful, so far.
View 9 Replies
View Related
Dec 16, 2010
Yesterday I booted into the Ubuntu 10.10 CD, and hit the Try Ubuntu button. Ubuntu booted fine from the CD, and after trying it for a few minutes, I decided to install it.
I already had (and still have) Windows 7 installed, so, using the Ubuntu Installer, I shrinked the C (system) partition of Windows by roughly 14 GBs. 10 of which used for Ubuntu itself, and the other 4 as Swap Area.
Installation went fine, and I was asked to reboot - and so I did. However, upon restarting, I was 'welcomed' by a stuck, purple splash screen. So I used Recovery Mode, and updated my Ubuntu. That didn't change anything. I rebooted, started Ubuntu without the "splash quiet" commands, and instead used the "nomodeset" command. I logged in my Ubuntu user, and ran the StartX command. It didn't work, and I was given a few errors, including "no screen found", "Fatal server error", and something along the lines of "no NVIDIA module found (...,0)".
So what's wrong with the NVIDIA driver, really?
View 2 Replies
View Related
May 7, 2011
I upgraded from 10.10 to 11.04 and now I have a blank purple screen. I have searched and went through some of the steps members have been giving, but haven't been able to fix the problem. I can get into the computer going through the grub menu, but when I restart I go through the same problem.
Here is the computer that I have: [URL]
View 9 Replies
View Related
May 11, 2011
If you had or have a black screen or purple screen problem in Natty, add support by subscribing to this Launch Pad Bug: Xorg's HAL causes Purple Screen or Black Screen on GDM startup. [URL]
Through helping people with these problems in the Ubuntu Support Forum (Installations and Upgrades) and through this sticky: [URL] this bug (above) seems to be where this problem is originating. It affects this problem with all video hardware types. As I said in this bug report: "Normal users should not have to be highly skilled "techies" to manually bypass a broken part of a system to make a released distribution work during an install or distribution upgrade"
View 1 Replies
View Related
Jan 19, 2010
After upgrading to 9.10 Karmic Koala, my Amilo Laptop (AMD64) refuses to boot. I installed GRUB2 which works fine for my WinXP ... and Karmic will boot in recovery mode.
When trying a normal boot, I get a black screen. CRTL-ALT-F1 yields just a blinking cursor. The system will immediately reboot when pressing CRTL-ALT-Entf.
When booting in recovery mode, I choose "Resume normal boot" from the menu, log in while in cosole mode and enter "startx" ... and the grafic environtment works fine!
Why does the system work in recovery mode, but does not start with a normal boot?
Fly.By.Wire
Here's some information on my system:
cat /proc/version
Linux version 2.6.31-17-generic (buildd@crested) (gcc version 4.4.1 (Ubuntu 4.4.1-4ubuntu ) #54-Ubuntu SMP Thu Dec 10 17:01:44 UTC 2009
lshw
mistral
description: Notebook
product: Amilo A3667G Series
vendor: FUJITSU SIEMENS
[Code]....
View 2 Replies
View Related
Feb 26, 2011
I am trying to install ubuntu 10.04. I had ubuntu 10.10 but I want to install 10.04 (32 bit) because 10.10 is slow. Problems with cd drive/cd caused installation to be incomplete so system cannot reboot at all.
I just tried the "Try Ubuntu without installing" option and got
Gnu Grub Version 1.98+20100804-5ubuntu3
Ubuntu, with Linux 2.6.35-25-generic
Ubuntu, with Linux 2.6.35-25-generic (recovery mode)
Ubuntu, with Linux 2.6.35-24-generic
Ubuntu, with Linux 2.6.35-24-generic (recovery mode)
Ubuntu, with Linux 2.6.35-22-generic
Ubuntu, with Linux 2.6.35-22-generic (recovery mode)
Memory test (memtest86+)
Memory test (memtes86+, serial console 115200)
Which should I select? and what do I do to go on to install/reinstall 10.04?
View 3 Replies
View Related
May 31, 2010
Ubuntu and right now I am running it inside Windows. I burnt it onto a cd so I could install it onto my 2nd harddrive. I know the cd is fine. When I boot off the cd a purple screen loads up with some weird symbols at the bottom looks like a picture of a battery = and then a picture of a stick figure man. If I hit f6 I can get to the option screen. I've tried using noapci, nomodeset, disabling the framebuffer, and vga=normal. None of them work as soon as I hit enter to start installing Ubuntu it just sits there on the menu screen and never does anything.
View 5 Replies
View Related
Feb 1, 2011
I am having problems installing Ubuntu netbook 10.10 from a USB drive.
I have a Lenovo ideapad S10-3 with Win 7 Starter.
I have tried two different USB drives, one is unidentifiable, the other is a Kingston.
I have used Pendrive and Unetbootin on both.
I have tried formatting the drives to FAT32 from both the Pendrive option and from Win7's default formatting software.
I downloaded the iso from the Ubuntu website torrent, and I did an md5 check to make sure that the file matched up.
When I boot from USB, the purple screen comes up briefly, and after two seconds changes to a black, terminal screen on which a bunch of text scrolls and then it eventually freezes. When I click a button, the menus pop up, and when I click on either "install" or "run from usb drive," the same terminal thing happens. Someone recommended that I try installing from that screen after changing the f6 options to nomodeset, noapci (I think), and acpi=off. (I cannot remember the exact lettering, but they were options on that f6 menu.) None of these changed the result.
With the Kingston, the line that it freezes on in the terminal is:
[6.548159] USB Mass Storage support registered.
With both drives, when I use the Unetbootin install, the menu comes up, and when I click on either the 'run' or 'boot' options, the cursor in the bottom left of the screen keeps flashing but no progress. (No terminal-like screen with this one.) It is different with the other drive. How to proceed from here?
View 9 Replies
View Related
May 11, 2011
I use my computer on a TV using a DVI to HDMI cable using an i915. Its been solid every release until this one. I change channel and then return to Ubuntu I get no signal/ Purple screen. I have tried turning off sync to vblank in compiz and running Gnome Desktop with no effects both seem to make no difference.
View 1 Replies
View Related
May 20, 2011
I have a duel booting system, Ubuntu 11.04 and Windows 7. I have installed burg. I have ended up with text when booting ubuntu. When I changed the splash it only show on shut down. How can i make it show on boot?
View 3 Replies
View Related
May 6, 2010
I initially had problems with the install CD giving the purple screen of death (a screen of vertical purple lines), however I managed to press F6 and set nomodeset and then add "xforcevesa no splash --" to the boot parametres (I guess) and I was able to boot into the live CD. Now however, I've installed 10.4 and I'm back to the purple vertical lines. My Dell 6400 laptop has an nvidia 7300 video card which must be the problem. My question is, how do boot into some kind of low graphics mode so that I can install the proper video drivers? I've been pressing shift to get to the grub menu, but the recovery mode only gets me the purple vertical lines as well, and I don't know what I'm doing.
View 7 Replies
View Related
Jul 24, 2010
I just got the new kernel update (2.6.32-24-generic, according to "uname -r"), and I went to restart my computer as the system requested. When I selected the new kernel from the boot menu, the Ubuntu splash screen came up, and then it did this subtle alternating shades of purple horizontal line thing. Then a vertical line appeared towards the right of the screen, and then everything faded into this cloudy, bright white splotchy...thing.
The keyboard was still responsive, and hitting ctrl+alt+delete restarted the machine, at which point I tried to replicate the problem, but everything loaded normally this time. My questions are: What the heck happened? Why? Is it dangerous? Why or why not? My machine is a Dell Inspiron 1501, 2 GB RAM, 120 GB hard drive, ATI integrated graphics, AMD 64 Anthlon X2 processor. I'm dual booting with Windows 7 as I learn Linux.
View 2 Replies
View Related
Apr 28, 2011
I just upgraded from Ubuntu 10.10 to Ubuntu 11.04 Natty Narwhal and now I've got a purple screen of death. The download and install process all went okay, but when I restarted the computer through the upgrade dialogue to complete the installation process the system never came back online. When I turn on my computer it goes through the standard boot screen (F2 and F12 options shown while it boots the HDD, ODD, and wireless modem), and then it goes to a purple Ubuntu screen and doesn't do anything at all. I let it sit like that for 30 minutes before turning off the power and trying to boot again, but the same thing happened. I can press CTRL-ALT-DEL and the system will reboot, but nothing I know to do will get me past the purple screen and the Ubuntu logo. DI'm using a Dell Studio 1 desktop computer. It's got a 2.5ghz Pentium processer, 4gb of RAM, and a 400gb HDD. I don't dual boot, and Ubuntu is the only OS installed.
View 6 Replies
View Related
Nov 18, 2010
I attempted to install Catalyst 10.11 for my ATI HD 2600XT and the system now only displays lines and a large block of pixels where the mouse would go. CTRL-ALT-F1 kills the system and does not provide a command prompt. This is a single installation, not dual-boot, but there is no Press Esc to access the Grub menu during startup so I cannot choose safe mode. I attempted to get into Recovery mode using the flash drive that I used to install the system and it tells me there is no Recovery kernel (I used the 64-bit Desktop installer, not alternative). Does anyone know an alternative to get into the Grub menu other than ESC during bootup? Alternatively, do I need to download the 64-bit Alternative ISO and create a new boot disk with it so I can access Recovery mode? Is there something else I'm not thinking of?
View 5 Replies
View Related
Sep 4, 2010
So I decided to try Ubuntu from a live USB drive 10.04 LTS on my Toshiba laptop as the windows Vista SP2 was running really slow. I liked it and clicked on the install icon. From there I set it for duel boot and off it went. The install worked great. I then downloaded the startup manager and changed the start up to be default of windows loader. Now when it boots into windows it goes to the windows recovery thing and won't start windows.
View 9 Replies
View Related
Dec 7, 2010
I accidentally chose the "recovery mode" and now i dont know what to do. What commands i have to enter to go back to normal ubuntu mode with graphic etc?
View 9 Replies
View Related
Apr 27, 2011
This happened when I was trying to install Ubuntu 11.04 from a disc, when I boot from the USB or CD I create of Ubuntu it gets past the selection menu and then I get stuck at this screen, keyboard is completely frozen, no HDD activity light or anything. This happened the same way when trying to install Ubuntu 10.10 This is an ASUS g60jx laptop, I would have assumed this was fixed by now, is their a special graphic mode I have to enter when installing?
View 6 Replies
View Related
