Ubuntu :: Boot Splash Screen With Purple Background
Feb 10, 2011
I switched back to my ubuntu installation few hours ago and I couldn't notice the strange boot screen! I remember that it used to be orange, there was the ubuntu logo and a nice loading bar. All is displayed now is a horrible purple background with just the text "Ubuntu" in the middle and a few dots just below it, showing the loading process.. I don't know how to restore the classic splash screen (I also found the original background in /usr/share/images/xsplash ).
View 2 Replies
ADVERTISEMENT
Dec 16, 2010
Yesterday I booted into the Ubuntu 10.10 CD, and hit the Try Ubuntu button. Ubuntu booted fine from the CD, and after trying it for a few minutes, I decided to install it.
I already had (and still have) Windows 7 installed, so, using the Ubuntu Installer, I shrinked the C (system) partition of Windows by roughly 14 GBs. 10 of which used for Ubuntu itself, and the other 4 as Swap Area.
Installation went fine, and I was asked to reboot - and so I did. However, upon restarting, I was 'welcomed' by a stuck, purple splash screen. So I used Recovery Mode, and updated my Ubuntu. That didn't change anything. I rebooted, started Ubuntu without the "splash quiet" commands, and instead used the "nomodeset" command. I logged in my Ubuntu user, and ran the StartX command. It didn't work, and I was given a few errors, including "no screen found", "Fatal server error", and something along the lines of "no NVIDIA module found (...,0)".
So what's wrong with the NVIDIA driver, really?
View 2 Replies
View Related
Apr 4, 2010
I had ubuntu 9.10 I upgraded to 10.04 after solving some problems (freeze at boot).
Since then, I don't have the ubuntu's logo showing up when I boot, but a purple screen with some blinking pixels. I didn't care much about it... but today my computer took too long at that screen (normally it was just 1/4 second, but today it was like a minute..). And it happened like 4 or 5 times in a row (Only at the 5th time I realised that it was not freezing up, but it simply would took more time)
After a reboot, it is again 1/4 second of purple screen but I don't want this problem to return.. so I want to get rid of the purple screen (I think it is an indicator of the problem)
Well, I already installed the graphic drivers (going to system > admnistration > hardware drivers). But it didn't solve anything. (I don't know if it is even related)
I searched in google, found something old (2006) and I think it maybe has some relation with my problems .. [URL]
But couldn't understand the conversation (i'm a linux novice)
My hardware:
ATI Mobility Radeon 4650 HD
P7450 2.13Ghz Core 2 Duo
View 1 Replies
View Related
May 10, 2011
Ok so just updated 10.10 to 11 and I can't do anything, the desktop is continuously flickering the purple ubuntu splash screen behind it and if I click anything it will open but flashaswell, I did have nova desktop which changes my wallpaper automatically but I uninstalled it as I thought that may be thebprovlem
Is there anything I can do? Or will I have to copy the home folder to USB and then do a clean install?
View 1 Replies
View Related
May 7, 2010
May i know how to change the ugly purple background on the ubuntu boot splash to other color, say black?
View 2 Replies
View Related
Jul 19, 2011
My HP Pavilion laptop will not boot. I just got up this morning, turn on the computer, and the only thing I get is the boot screen, the Ubuntu logo on the purple background, and that is it. I installed 11.04 Natty a few weeks ago, when it was released. I don't know what other info to give you. The computer acts normally and just can't seem to get past the boot.
View 9 Replies
View Related
Mar 24, 2010
I originally have Ubuntu Lucid on my machine. I just installed opensuse 11.2 on another partition without bootloader installed. So I'm still using the Ubuntu Lucid default bootloader grub2. I can boot up opensuse correctly. the nagging thing is that there's no splash screen show up during the boot process, instead, lines of command are flashing, the console background is also missing and the font under console (tty1-6) is huge. what can I do to have these back to opensuse? the current entry in grub2 for opensuse
Code:
menuentry "openSUSE 11.2 (i586) (on /dev/sda2)" {
insmod ext2
set root='(hd0,2)'
search --no-floppy --fs-uuid --set 9ac05ede-e7c4-47f3-b55b-66d5844$
linux /boot/vmlinuz-2.6.31.12-0.2-desktop root=/dev/sda2
initrd /boot/initrd-2.6.31.12-0.2-desktop
}
which parameters should I add?
View 2 Replies
View Related
May 12, 2010
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
View 1 Replies
View Related
May 27, 2011
'm trying to duel boot windows 7 and ubuntu 11.04 on an Acer Aspire 5736, but when I try to boot from the cd (which I burned with InfraRecorder) it first goes to a black screen with a blinking under score in the corner, then to a purple screen with a couple symbols at the bottom, and then the screen goes black and nothing else ever happens
View 4 Replies
View Related
Apr 3, 2011
when I install them all goes well but when I get into the GUIs I can hardly press anything - major bug with mouse and it is really annoying. Secondly there is a big gap between the GUI and my screen's edge. Hmm, I think - it must be a problem with the GPU driver and that might be the thing also messing with the mouse clicks. I download the drivers provided by the Ubuntu community - all goes well and I restart - stuck at purple screen after the "moving dots" on boot. So I reinstall the whole OS and try with the drivers provided by NVIDIA - same thing. I try the same procedure with Kubuntu and no progress.
View 2 Replies
View Related
May 1, 2011
I already had Plymouth issues on 10.10, which was solved by this script [URL]
After upgrade, boot only gave me a blank, purple screen, so I used his revert script then tried this : [URL]
But I'm only getting a black screen. Removing vga=795 option only make it stay purple. It might be because of the multiples workarounds I tried back in 10.10, but I don't know how to clean that up. I have an ATI HD Radeon Pro 2400 card with free drivers (but I was using the proprietary ones during upgrade).
View 2 Replies
View Related
Jul 17, 2011
Every once in a while when I turn on my computer it freezes on the purple screen after the screen where you choose the operating system. When this happens the keyboard doesn't work and I have to hold the power button. Also I think this might be connected to the problem I had when I was running ubuntu from the live cd, which was freezing after choosing the option of "trying" the OS before installing. I'm using an HP Dv7-3112sa and am running the default 64bit ubuntu from the website.
View 6 Replies
View Related
Jun 29, 2010
When I try booting my computer under Ubuntu, it freezes whenever it gets to the part of the purple loading screen (with the Ubuntu logo and the red/white dots indicator). I won't load any further, but I can still turn it off by pressing the power button. Has someone else got this problem? Ubuntu was my main partition, and I don't have any practical way to make a hard install.
View 3 Replies
View Related
Feb 1, 2011
I am having problems installing Ubuntu netbook 10.10 from a USB drive.
I have a Lenovo ideapad S10-3 with Win 7 Starter.
I have tried two different USB drives, one is unidentifiable, the other is a Kingston.
I have used Pendrive and Unetbootin on both.
I have tried formatting the drives to FAT32 from both the Pendrive option and from Win7's default formatting software.
I downloaded the iso from the Ubuntu website torrent, and I did an md5 check to make sure that the file matched up.
When I boot from USB, the purple screen comes up briefly, and after two seconds changes to a black, terminal screen on which a bunch of text scrolls and then it eventually freezes. When I click a button, the menus pop up, and when I click on either "install" or "run from usb drive," the same terminal thing happens. Someone recommended that I try installing from that screen after changing the f6 options to nomodeset, noapci (I think), and acpi=off. (I cannot remember the exact lettering, but they were options on that f6 menu.) None of these changed the result.
With the Kingston, the line that it freezes on in the terminal is:
[6.548159] USB Mass Storage support registered.
With both drives, when I use the Unetbootin install, the menu comes up, and when I click on either the 'run' or 'boot' options, the cursor in the bottom left of the screen keeps flashing but no progress. (No terminal-like screen with this one.) It is different with the other drive. How to proceed from here?
View 9 Replies
View Related
May 20, 2011
I have a duel booting system, Ubuntu 11.04 and Windows 7. I have installed burg. I have ended up with text when booting ubuntu. When I changed the splash it only show on shut down. How can i make it show on boot?
View 3 Replies
View Related
Sep 5, 2011
make my own home server to play with. While reading a guide I found out about a package of software called Amahi. Very easy and yet so powerful says the site. That's what I need! I looks cool and indeed pretty easy. I already start smiling because I have this old Ubuntu 11.04 computer here. Then I see that Amahi runs best on Fedora 14 and that the support for Ubuntu is still in Alpha phase. No problem, let's install F14 then. I put everything right in the BIOS. I downloaded the DVD iso image, burned it and put it in my drive. Nothing happens, soon I realise that drive only accepts CD's. I quickly change it with a CD/DVD drive of another computer, but still nothing happens. Then I read about this LiveUSB thing. I do everything needed and change boot sequence to Removable. It still keeps booting Ubuntu on Hard Disk 0. My last resort: Fedora Live i686 iso on a CD. Things go as expected. What am I doing wrong? I just want to see that (probably) blue background of Fedora booting instead of that purple one of Ubuntu.
View 7 Replies
View Related
Jul 24, 2011
i used to have 9.10 but now upgraded to the latest version. Back then I changed the background to full black for both the preboot screen and login screen.Now after upgrading it changed it to the purple color screen. I am wondering how I can change back the background color?
View 1 Replies
View Related
May 13, 2010
I added the unity ppa and installed unity to check it out thinking I could just switch back with
Code:
dpkg-reconfigure gdm
Unity left me with just the purple familiar backdrop and a large black X as the mouse cursor. In running the above statement I'm left with the background and cursor only. how to get unity working and/or how to get back to gnome?
View 1 Replies
View Related
Feb 15, 2011
I been trying to change the splash screen, boot screen thing and now when it boots it just goes right to the log-in screen. I installed "startupmanager" but every .so file I try to add, just won't get added for some reason.
View 3 Replies
View Related
Feb 22, 2010
My friend was showing me how to change the splash screen and used a app called start up manager (SUM).He changed the resolutions for GRUB and something else. The GRUB screen resolutions has changed fine but after that I get a line of text which I cant read as its too quick.
View 6 Replies
View Related
Jul 19, 2010
So I turned off my computer the other day (I leave my laptop on, pretty much 24/7 I only turn it off if I have to, or I forget to plug it in I turned it off this time just because it was feeling warm)...
And when I went to turn it back on, the splash screen was big and ugly looking, then the orange ("loading") dots loaded to the end... but then it just stopped.
My computer wouldn't boot up... so then I used one of the older versions (you know grub lets you select versions before upgrades or whatever)... and the boot splash was the nice small version... and it loaded just fine, but then after the splash screen went away... the monitor just stayed black... same thing with the version before that.
So then I tried recovery mode on the first one (the latest), and when I clicked "boot normally" it took me to shell. However, everything was working fine, I could load up my non-x dependent programs like IRSSI just fine.
I think it has something to do with me installing the ATI proprietary driver (which was stupid of me, Ubuntu was handling my graphics card perfectly without it... and I hate using closed sourced software).
View 3 Replies
View Related
Jan 11, 2010
I don't know what caused it, but as I boot into Ubuntu (9.10), the login screen never appears. Boot splash shows,then the cursor shows up but never the login screen. I haven't found anything that will reset the default gdm or login screen that works.
View 2 Replies
View Related
Feb 14, 2010
I set up a dual boot on my laptop a few days ago, between Windows XP and Ubuntu 9.10 (installed from Live CD). All the hardware is working fine.
Anyway, SOMEtimes, during the splash screen , the screen turns off (physically turns off) and the hard disk seems to stop. I cant do anything appart from force it to power down.
Yet sometimes, it boots up fine.
I want Ubuntu to work first time EVERY time.
View 3 Replies
View Related
May 16, 2010
I just installed ubuntu 10.4 on my new laptop and when it boots up there is no splash screen (All I see is a blinking cursor) and it takes about 28 seconds to boot up... I do have all the graphic stuff working...
View 2 Replies
View Related
Jul 20, 2010
I recently installed my first distro, Gnome Ubuntu Linux 10.04 via WUBI dual-booting alongside my Windows. I decided to try the other desktop environments. So I installed Kubuntu-Desktop (KDE) and Xubuntu-Desktop (XFCE) using Synaptic Package Manager.
However, Kubuntu KDE changed the boot splash screen into a from the default Ubuntu one, to the Kubuntu one. Also Xubuntu XFCE changed the log-in screen to the Xubuntu one. I DO NOT want these changes. I just wanted Normal Ubuntu-branded Ubuntu Linux with the option of logging in into the desktop environment of my choice.
View 5 Replies
View Related
Aug 23, 2010
I've upgraded my ubuntu to 10.04 LTS for netbooks and I have this bootsplash - shown below - only on Shut Down and Restart.So when I'm booting my netbook and I select from grub the current version of ubuntu I just have a blank screen without any ubuntu logos until the desktop appears. (I have an Asus Eeepc 1005 HA with intel integrated graphics chip)
View 2 Replies
View Related
Sep 2, 2010
I tried to fix splash screen resolution on boot up in 10.04 from instructions I found on the net. I updated lines in grub. Now when I boot I see the dual boot menu but hit linux i just get a black screen. I can't get into my system from there.
View 7 Replies
View Related
Sep 5, 2010
I'd like to change the boot splash screen from the current 'Xubuntu' text in white on a black background.Making changes in Settings->Xfce 4 Setting Manager->Session and Startup has had no effect, and Startup Manager does not display an option to change the splash. I feel I'm missing something obvious here, but where should I be looking?
View 1 Replies
View Related
Jan 18, 2011
I would like to know how to change the boot/startup splash screen in Lubuntu.
View 6 Replies
View Related
Jul 13, 2011
I just recently installed 11.04 fresh onto my computer. Everything's been working great and i've been enjoying the new interface immensely. However, today when i booted my pc up, after i entered my password and logged in, I'm stuck at the splash screen. I can move the mouse and i have the default 11.04 image up on the screen, but ive got no menus or taskbars and i know it hasn't logged in yet, because my wallpaper isnt up. I've restarted a number of times and this keeps happening.
View 1 Replies
View Related
