Ubuntu :: Screen Freezes On Loading Conky File
Nov 13, 2010
Every time I load my conky file, the screen just freezes. I have tried different conky script but still not working. I also provide some screen shot to have better idea whats going on. [URL]. This is the script I am using right now:
Code:
# set to yes if you want Conky to be forked in the background
background no
cpu_avg_samples 2
net_avg_samples 2
out_to_console no .....
# Default colors and also border colors
default_color white
default_shade_color white
default_outline_color white
# Text alignment, other possible values are commented
#alignment top_left
#minimum_size 10 10
gap_x 15
gap_y 70
alignment top_right
#alignment bottom_left
#alignment bottom_right
# Gap between borders of screen and text
# Add spaces to keep things from moving about? This only affects certain objects.
use_spacer no
# Subtract file system buffers from used memory?
no_buffers yes
# set to yes if you want all text to be in uppercase
uppercase no
# none, xmms, bmp, audacious, infopipe (default is none)
xmms_player bmp
# boinc (seti) dir
# seti_dir /opt/seti
# Possible variables to be used: .....
View 3 Replies
ADVERTISEMENT
Dec 21, 2010
I was not able to install any version of Ubuntu. Everytime when the splash screen would appear, the computer would freeze and no hard drive activity would be present. The only way was to use the alternate install version of Ubuntu 10.10. Though, the splash screen problem persists. After the Ubuntu boot screen disappears, the splash screen appears with the coursor. About 3 seconds later it becomes unresponsive and the hard drive light stops showing activity. After reading a lot, I think it's my video card driver. I'm a complete newbie, so any commands need to be written out so I can just type in and cross my fingers. I can boot into the GRUB recovery mode. I log in and have a text based setup at this point.You know, I can type sudo commands and all that jazz. How can I fix my video? The graphics is not integrated. It's a 32mb nvidia TNT2 PRO.
View 1 Replies
View Related
Jun 29, 2010
When I try booting my computer under Ubuntu, it freezes whenever it gets to the part of the purple loading screen (with the Ubuntu logo and the red/white dots indicator). I won't load any further, but I can still turn it off by pressing the power button. Has someone else got this problem? Ubuntu was my main partition, and I don't have any practical way to make a hard install.
View 3 Replies
View Related
Jan 27, 2010
I recently upgraded from Hardy to 9.10 Kubuntu. The install went smoothly, and when I boot up, the loading screen (the one with the progress bar) does its thing. Then I see the 'waiting' cursor (in Kubuntu, the two dots chasing each other around in a circle). I see this for about two to three seconds, then the entire thing freezes up and I can't do anything, including switching to a virtual console. How do I figure out my system's dying words so I can figure out what's going wrong? As a (sort of) aside, when I open files in /var/log for reading with cat <file> | less, I have to Page-Down a whole bunch to get to the most recent stuff. Is there a way to jump to the bottom, or read with something other than what I have been using?
View 1 Replies
View Related
Jun 13, 2011
Said that all the config i find put all the info in one place of the screen, in this example on the right side:
url
or like conky colors where you can put in either side, or other complex examples that use folders with images..that at least i need one day to study all the variables it has...
What i want is something simple, in my black background i dont want images and effects, only white simple text.
My problem is: i want for instance my specs above, my log info in the middle, my music info bellow (above my clock) and in conky config i'm hitting my head in the wall....
For instance if i use my facebook script to appear in the midle how the hell can i put my music info bellow without ruined the facebook in the midle...do i need 2 conky configs?
View 4 Replies
View Related
Feb 1, 2011
when I type "conky" in terminal it returns with Conky: invalid configuration file '/home/user/.conkyrc' Conky: missing text block in configuration; exiting ***** Imlib2 Developer Warning ***** : This program is calling the Imlib call: imlib_context_free(); With the parameter: context being NULL. Please fix your program. I've tried completely uninstalling, rebooting, then reinstalling, still same error?
View 3 Replies
View Related
Mar 1, 2010
i noticed that almost every few seconds my conky just freezes for minute or-two after i add two torrents to download. Actually, it almost doesn�t work/stays freezed almost all the time.Is there something to fix this?
Code:
# Use Xft?
use_xft yes
[code]....
View 5 Replies
View Related
Jul 31, 2011
I'm trying to install Ubuntu 11.04 on this old desktop that is currently running WinXP. I get to the menu to choose to try ubuntu, install, or boot hard drive. I choose Install and it begins to load with those 5 dots then after a minute or so it just freezes on that screen. I then try to choose the "try" option and it does the same thing, although takes slightly longer before it freezes.I just happen to have a v8.10 disc laying around so I try that. I get to the same options menu, it loads, and then shows a black screen with a white blinking underscore. Same goes for when I use the "try" option.Specs:2.53GHz P41.5GB RAM250GB HDD
View 2 Replies
View Related
May 13, 2011
I am using grub4dos 0.44 but can't boot directly into Kubuntu. The bootup freezes at the step of reading the initrd. Can't copy 'n paste the exact bootup-message but it looks similar to this one, I found on another forum-thread:
Code:
Filesystem type is fat, partition type 0x06 [Linux-bzImage, setup=0x1400, size=0xcff87] Unlike the guy who posted the two lines above, I installed Kubuntu on an ext3-partition (hd0,5), (which is /dev/sda6 in Ubuntu) and without an own bootloader, since I wanna use grub4dos instead of grub2. The installation is fresh - the initrd-file shouldn't be broken. My menu.lst looks like this:
[Code]..
View 1 Replies
View Related
Jun 3, 2011
I am having problems opening and printing word 97/2000 formatted documents that were saved using OpenOffice in Maverick. If I try to open one of these files in openOffice for Lucid, it causes OpenOffice to freeze every time. If I save the files in OpenOffice format and share them between Maverick and Lucid - everything works fine. Anyone know what might be causing OpenOffice in Lucid to freeze when loading word 97/2000 files?
View 5 Replies
View Related
Sep 19, 2009
I installed fedora on my laptop and everything went fine, i installed my bradcom drivers and rebooted.
Next step was kmod for nvidia but when i rebooted i couldn't use fedora anymore cause loading freezes at some point. same thing happens to my desktop pc, where i solved the problem booting with an older kernel (this time i have an error saying "eth0 link not ready" or something like that). Everytime i try to boot with a more recent kernel loading freezes. The point is...i can go through with my desktop pc by choosing another kernel, but i can't even boot with my laptop.
View 1 Replies
View Related
May 26, 2011
tried to install 11.04 using wubi and wouldnt work so created a boot disk and did it that way: the boot disk loads but it freezes after the loading dots
View 6 Replies
View Related
Oct 24, 2010
I've been running Ubuntu 10.10 since its became available and have recently dialed in my conky config. All has been working just fine. I usually leave my system running 24x7 and will reboot it or shut it down from time to time.
I have conky running via a command line (manual) and as soon as I enter 'conky' it will run immediately. However, this morning I rebooted my system, ran conky in a terminal window as I usually do...nothing the usual script shows up in the terminal window, but conky didn't appear on the screen. I've not changed backgrounds, changed my .conkyrc file, nothing. I removed conky and reinstalled it and pulled a new .conkyrc from a backup. I could read the original just fine, but thought perhaps the . file had something wrong. Still the same results...conky didn't appear on the desktop. Here is what is really weird.
After about 3 or 5 minutes, conky appeared on screen and is running fine except its no longer pulling my external IP number via:
Why its taking conky so long to appear on the screen?
View 4 Replies
View Related
Oct 16, 2009
I'm using Arch with the latest updates and I'm pretty sure this is a software problem.Basically about one out of five times my system freezes at "Grub Loading Stage 2". Whenever this happens, I usually just reset my box with the reset button and it will boot up just fine the next time.I originally put it down to being a defect in my hard drive which is probably three years old now at least. However, last week I bought a brand new 1.5TB drive. I removed my old drive and am using only my new one. Same problem.I Googled for this problem and found a bunch of posts with the same issue as I'm having, yet all of those issues are with people that dual boot with Windows. I don't. I only have Arch and no other OS on my system. I then tried reinstalling Grub and that doesn't seem to have solved it.I'm hoping someone can help me out with this. I hope it's not a hardware problem. Any help is VERY appreciated as this problem makes me worry that something worse is going on.
View 3 Replies
View Related
Oct 25, 2010
I have been using ubuntu wel a long time now and I know my way around in linux but I recently updated my laptop from ubuntu 10.04 to ubuntu 10.10 all went fine until I had to restart my laptop. I got a purple screen (loading screen) with 4 dots and a oldskool like font which said: Ubuntu 10.10 Right after that the screen goes purple and its like the system halts I hear no login sound etc just a purple screen. So I did a clean install from the 10.10 live cd which booted perfectly fine and the system was also useable like before. But when I installed the system and rebooted it again no problems.
But when I tried to install the proprietary nvidia driver (the recommended one) I got the same problem again the purple screen. After searching a while on the internet I only found posts which had the problem with ATI cards but my laptop is fitted with a Nvidia Geforce 9300 M card. So I tried several things like removing the xorg.conf (read it somewhere) which ofcourse did not work, and booting in graphics fail safe mode which worked. So the point is in 10.04 and 9.10 I CAN use my video card drivers but not in 10.10 is there a solution to this problem? I am talking about the 32 bit version of ubuntu and here's my system hardware profile:
Intel core 2 duo t7350 @ 2,0 ghz / 3mb l2 cache
2 GB DDR3 ram
160 gb hdd
Nvidia 9300m gs
Chipset: I dont know sorry
Model: Samsung R710
View 2 Replies
View Related
Mar 10, 2010
After seeing this conky profile I decided to try my hand at making something similar, as my conky profile looked pretty unappetising.All my conkyrc file does at the moment, is display an image and I seem to be falling at the first hurdle. I would like the image to be flush to the bottom of the screen however it floats about 100px above the bottom of the screen.Screenshot attached and conkyrc file below. Does anyone know how to fix this?
Code:
use_xft yes
xftfont Liberation Sans:size=11
[code]....
View 1 Replies
View Related
Oct 8, 2010
I am trying to get conky to use the whole length of the screen instead of just have.This is my conky file. PLease help.
Code:
Conky 2
background yes
use_xft yes
xftfont HandelGotD:size=8
[code]...
View 1 Replies
View Related
Jul 30, 2011
What is the command to use to move conky to the middle of the screen and also have this every time it starts up?
View 1 Replies
View Related
Dec 26, 2010
Is there a known problem with the Lubuntu 10.10 image here? I have downloaded it to two different computers, then burned the images to two different blank CD's (different brands) and neither loads. Both only get as far as the Lubuntu menu, once ENTER is pressed at that point to load the LiveCD, a blank screen eventually appears with a flashing cursor at the upper left of the screen, that's it. They were both burned using the slowest burn speeds available.
View 9 Replies
View Related
Apr 15, 2011
like any other Linux newb, I came to Ubuntu because my Windows crashed one time too many. And I chose Ubuntu because "it just works". But these past few days that hasn't been true. I'm posting this from a netbook with Ubuntu, and am having no problems whatsoever, but normally I use an Acer Aspire 5920G laptop. I'll include the specs as written on the sticker:
* Intel Core 2 Duo processor T5250 (1.5GHz etc)
* Up to 1024 MB Nvidia Geforce 8600M GS Turbocache
* 2 GB DDR2
Let me know if you need more details, and I'll add them later. Now, what happened was I clicked "hibernate" while leaving Firefox open. (I've done this hundreds of times, no problem) And when I went to turn it back on the next day there were weird graphical glitches in the loading screen, and it booted to the "tty1" prompt screen. I did a lot of googling and found quite a few posts about it, but the solutions either didn't work, or I didn't understand them. After trying several different suggestions from this forum and others, I managed to delete the graphics drivers. That enabled me to boot in low graphics mode, and naturally, I tried a whole bunch of things to make it work properly again. That only made it worse. Now it went straight from the loading screen to just blanking out and turning the display off. So, I tried new things. Over and over. The weird thing is even when I disconnected my harddrive and ran from a Live USB, the problem persisted. Could there be an issue with the graphics card itself? Anyway, after reconnecting the harddrive I tried to boot again. And it suddenly worked. Even HDMI to my bigger screen worked.
[Code]...
View 1 Replies
View Related
Dec 29, 2009
I am trying to install Fedora 12 x64 on my 27" iMac 10,1. I have tried both the installation dvd and the gnome live cd (both x64 i did not try the x86). On the installation dvd I get as far as the menu giving me the boot/install options - I have tried to install both with a basic video driver and the regular install/upgrade option - both times it begins loading components for the installer program (/sbin/loader) etc. After it loads sbin/loader and mounts the partitions it freezes with half the screen being the terminal txt beforehand and the other half being just a standard fedora logo w/blue background. It is not much different when I try the live-cd the only different is it does the exact same thing when the timer for automatic login is done. Any possible command line arguments that I could use to stop the graphical corruption?
View 2 Replies
View Related
Oct 12, 2010
I use 2 monitors and Conky defaults to the top right of my right-hand monitor.I'd like to move it to the top right of the left-hand monitor.
'alignment top_left' moves it to the left-hand monitor, but obviously the left-hand side. I need it on the right.
View 3 Replies
View Related
Oct 16, 2010
I just installed Kubuntu 10.10 x64. I copied de .conkyrc from my Ubuntu install, where it worked fine, to my Kubuntu install. But now, it's quite awfull. I've put a screen at the bottom of the post.[URL]
View 1 Replies
View Related
Jun 26, 2011
I have conky installed and set up as a startup application, however everytime I log out and back in conky creates itself as a new window:
How can I get conky to start normally without having to do a manual restart everytime I login?
View 3 Replies
View Related
Aug 4, 2010
Unfortunately my experience in the Unix* based world up to this point has only been using web servers and administrating them, no GUI experience of any kind so I am completely unfamiliar with the setup and entire usage of Xorg or any other Window manager at this point. The issue I am having is with the screen resolutions I am being allowed to chose for my Dell Studio 1535 running Fedora Core 13 and the KDE 4 desktop GUI, thus my issue since I am not really familiar with how to run a Unix* based GUI in the first place.
The basic information, if there is more needed just advise what and what command gathers that info (or what conf/log I should look into in order to find it). Laptop is a Dell Studio 1535 Video is the Mobile Intel GMA X3100 ATI Radeon HD 3200 Graphics. LCD interface is the LVDS.
So far it seems to give me modes for 1024x768 and on down, nothing above this. I believe I am supposed to use the radeon driver being that is the type of card it is but every time I change the xorg.conf file to use this instead of vesa the system wont get past the loading screen anymore upon reboot and nor can I seem to find a way to bring up a command line so I can hit up the Xorg.0.log to see what is wrong or change the xorg.conf file back to the original driver it had listed.
I am going to assume this is a missing driver or something else it hangs on but without being able to get access back to the system and having to rebuild it again (re-install via live CD) I am basically out of luck at this time. Sorry for the rather poor post but I do hope to receive some basic directions on where to go from here with this issue
View 12 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
May 29, 2011
i have the following text in a file located in /home/anoopm101/.task [description:"this is the text" entry:"1306682734" status:"pending" uuid:"25c54e1b-824f-52bc-4933-dfe7cda34bc7"]
i have to display on my desktop "this is the text" using conky.
View 2 Replies
View Related
May 29, 2011
i have the following text in a file located in /home/anoopm101/.task
[description:"this is the text" entry:"1306682734" status:"pending" uuid:"25c54e1b-824f-52bc-4933-dfe7cda34bc7"]
i have to display on my desktop "this is the text" using conky
View 7 Replies
View Related
Nov 1, 2010
I use the awesome todo.txt cli tool for my todo list. I want to find a way to display this on my desktop, and have it update every time I update the file. Is there an easy way to do this? Does conky do stuff like this?
View 2 Replies
View Related
Apr 29, 2010
After a fresh install of Lucid I found this error on my screen "the panel encountered a problem while loading "OAFIID:GNOME_NetstatusApplet" do you want to delete it?" I kept pressing no and having a completely worthless system. The programs were all opening in the left corner with no controls to move or close them.
View 1 Replies
View Related