Ubuntu :: Intel Corporation Mobile GM965/GL960 And Compiz?
Jun 29, 2011
I have a problem with compiz and this card, after few weeks suddenly it doesn't work with ubuntu, I always had troubles with this kind of cards, I was always able to solve it by this forum but this time I gave up.
The driver for GM965/GL960 is working perfectly but the compiz effects although they are enabled they are not applied to the desktop environment.
The compiz-check output is:
Code:
Gathering information about your system...
Distribution: Ubuntu 11.04
Desktop environment: GNOME
Graphics chip: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
Driver in use: fbdev
[Code]...
View 2 Replies
ADVERTISEMENT
Mar 1, 2010
I have a fairly new laptop, 2*1.8 Ghz, but when I try to run games more advanced than pac-man, it's about 1-0.5 frames / second. This doesn't seem right. I've goggled it, and found a few posts from 2008-2009, but nothing that actually helped. Does anyone have any idea, as to what might be wrong? If anyone has this card, I'd like to see what you have in your /etc/X11/xorg.conf file...
@art:~$ lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03)
View 14 Replies
View Related
Apr 22, 2010
About a year ago, I installed ubuntu on my ThinkPad X61, which was running windows. I basically just overwrote the hard drive, assigning one partition to the install. The graphics have always been a little buggy when it comes to 3d rendering or flash. Flash graphics flicker a lot and 3d rendering leaves trails or doesn't show up at all. Is there a way to configure the graphics card? I'm completely unexperienced when it comes to graphics cards and don't know where to start. I don't even know how to access its settings.
View 1 Replies
View Related
May 3, 2010
I just upgraded to 10.4 lts, and compiz stoped working. EDIT: lspci | grep VGA gives me:
Code:
00:02.0 VGA compatible controller:
Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
If I try to run it from terminal i get:
Code:
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
[Code]...
View 6 Replies
View Related
Apr 30, 2011
My lap has a "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)" video card, and never took the 1280x800 resolution (that I had on windows). I searched a lot, and I installed a driver from the package manager (can't remember the name ...). Well, restart, and it's stuck at the finish of fedora loading process (a blank line).
I can access to the terminal (ctrl + alt + f2) and modify kernel parameters. By the way, on gnome I could't enter to "Desktop Effects" (it threw an message like "can't enter 3D Acceleration")
View 2 Replies
View Related
Jul 14, 2010
Can someone give me clues about adjusting my Ubuntu Lucid X11 use of my Intel video hardware? My laptop has video hardware identified as follows:( output from sudo lshw)
Code:
*-display:0 UNCLAIMED
description: VGA compatible controller
product: Mobile GM965/GL960 Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
[Code]...
Q3: The lshwoutput shows two displays, display:0 and display:1. Can someone tell me why two and how to make use of both of these? NOTE -- The existing forum entries are mostly from April 2009 or talk about Compiz issues. While Compiz will squeeze video hardware pretty well, I use a tablet-PC and so far, Compiz features do not play well with tablet features.
View 8 Replies
View Related
Apr 20, 2010
I cant install or do to work the compiz...
my driver is Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
what can i do to have all effects and working fine?
View 12 Replies
View Related
May 7, 2010
When trying to install Lucid on my HP Compaq 6710b (INTEL Mobile GM965/960 graphic controller) using the alternate i386cd with an usb pen i (re-)experiencing (known from the Jaunty installation) the following problem:Boot from USB (works) Select language (works) Choose to install ubuntu (works) Removing quit from the boot options, hit enter, see some output (works) Starting the installation interface (fail) The screen wents to black, but system seems not froozen. What i've tried to fix this issue:fb=false as bootoption (worked in jaunty, does not work with lucid) frambuffer=false
fb=off
debian-installer/framebuffer=false
vga=123, tried all of the offered modes
vga=771 (get some screwed up output on the screen, which i guess from that the system/machine is not frozen)
i915.modeset=1
i915.modeset=0
xforcevesa etc
Anyone managed to install Lucids with INTEL graphics + the alternate cd? PS: I need the alternate cd to setup an encrypted system. PPS: Just tested the desktop i386 image which works flawlessly.
View 4 Replies
View Related
Sep 1, 2011
I know Compiz works on my mobile 915 intel graphics (I have been using it until now with Desktop cube) but now I have external monitor hooked up extended to laptop monitor and I lost compiz - no longer works. How can I fix this?
View 3 Replies
View Related
Mar 11, 2011
Does vaapi support the intel gm965 video card?
View 6 Replies
View Related
Jan 16, 2010
what is really a rant disguised as a question, but does anyone have this combination working? My NetGear router shows the connection as allowed from the MAC address in the router logs, And I can see the network I want to join in the list of visible networks from the laptop, but dmesg shows Ubuntu disconnecting with
WPA-PSK [TKIP] only:
wlan0: disassociating by local choice (reason=15)
WPA-PSK [TKIP] + WPA2-PSK [AES]
wlan0: disassociating by local choice (reason=3)
I'm sure there is a simple explantion that has been sufficiently buried somewhere but after several hours of googling and searching the forums here I can't find it. Anyone want to help out an old man RTFM?
I'm getting really disappointed here lately - things are getting worse, not better. In my case in particular I have this laptop with supposedly open and supported drivers and they don't work, however, the exact same distributuon on a Dell D830 with a broadcom NIC does. under 8.10 and 9.04 this worked out the box - just logged in, gave the PSK and away we went. I can't see the attachment I just uploaded so to include the information requested in the "how to get help" post, I'll put it all here inline...
Code:
Machine Brand and Model (PC/Laptop): Lenovo R61
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
[Code]...
View 1 Replies
View Related
Jul 20, 2010
Ok I am still having this issue using the intel driver in gentoo. xf86-video-intel is already installed
I followed this guide but still no luck: [URL]
The problem is, when using "startx" the screen goes black and is frozen.
Xorg works fine with the vesa driver but is horribly slow.
[Code]...
View 3 Replies
View Related
Mar 3, 2011
Just did a clean install on a Dell Latitude E6400 of Slackware 13.1 and, for the most part, all is working great. Got wicd installed and wireless came right up, nvidia drivers installed and video is fantastic, but for some reason my wired connection isn't happening. The device is detected, but I can't get an IP.
Code:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
[Code]...
View 14 Replies
View Related
Apr 1, 2010
I have been getting from my wireless adapter. This has been going on for quite some time but only now am I able to see a pattern. The behavior seems to be the following: Start up, connects to network and work fine until I suspend my machine. On wake up, it works again but after a seemingly random amount of time the connection is lost and I can no longer find any networks. Attached is dmesg output after startup and connecting to a wireless network (dmesgAfterConecting.txt) and the same after the connection has been lost (dmesgAfterConnectLost.txt). I get this error which seems important:
[Code].....
View 1 Replies
View Related
Jul 22, 2010
I am new to Ubuntu and I have problem with wireless connection. I could not find any wireless connection at all. I am now using wired connection. Sony Vaio SZ series, Intel Corporation PRO/Wireless 4965 AG or AGN My software details are:
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]....
View 1 Replies
View Related
Aug 29, 2011
I installed Fedora 14 on my new PC but I don't have network connection. In fact, I hit the command "lspci" and the prompt return :
Code:
Ethernet Controller : Intel Corporation 82579V Gigabit Network Connection
So, I created a ifcfg-eth0 file on /etc/sysconfig/network-script because it doesn't exist :
Code:
DEVICE=eth0
TYPE=Ethernet
BOOTPROTO=dhcp
ONBOOT=yes
Then, I restart network service, but eth0 is down, no device found for the connection eth0.
View 10 Replies
View Related
Sep 20, 2010
my platform Centos 5.3
i did the following
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
[Code]....
View 3 Replies
View Related
Jan 16, 2010
Lets get straight to the point. im using Karmic, and as said by the title my audio card is not detected. lspci -v gives the following:
Code:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: ASUSTeK Computer Inc. Device 1763
[code]....
View 5 Replies
View Related
Apr 30, 2011
My lap has a "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)" video card, and never took the 1280x800 resolution (that I had on windows). I searched a lot, and I installed a driver from the package manager (can't remember the name ...). Well, restart, and it's stuck at the finish of fedora loading process (a blank line). I can access to the terminal (ctrl + alt + f2) and modify kernel parameters. By the way, on gnome I could't enter to "Desktop Effects" (it threw an message like "can't enter 3D Acceleration")
View 1 Replies
View Related
Jul 18, 2011
[code]...
Just got World of Warcraft Installed and when I start the game after I get past the 2 cinema's while I'm trying to click yes on the rules the screen seems to bee flashing over and over and over. I was thinking maybe the 3d accelerator isn't installed or maybe I need to install something because its Intel?
[code]...
View 2 Replies
View Related
Feb 17, 2010
I was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
[Code]...
View 8 Replies
View Related
Mar 26, 2011
I've reinstalled Slackware 4 times today because of things I've messed up along my way, after upgrading the linux kernel I've had issues with getting back to desktop, so I'm on a clean slate right now with the exception of installing wicd. I need help since wireless is not working.. My wireless worked fine out of the box with Ubuntu,I don't understand why it is not working now... Using Slackware 13.1, Kernel 2.6.33.4
Code:
bash-4.1# ifconfig wlan0 up
SIOCSIFFLAGS: No such file or directory
[code]....
View 13 Replies
View Related
Jul 12, 2011
I'm releaving a HP Probook 4710S from it's native Vista) First of all let me say I'm happy because CentOs 5.6 handles it's Ati Radeon graphic flawlessly, unlike other Distro's I tried on this type of machine. So thumbs up for CentOs! But now I've come to a stop on the wireless card.
[Code]...
View 3 Replies
View Related
Jun 6, 2010
I have installed FC13 (x64) but X Server fails to start on my machine having "Intel Corporation 82G33/G31" Integrated Graphics Controller. find the attachments xorg.conf & Xorg.0.log. My smolt id is [URL]...
View 1 Replies
View Related
Nov 12, 2010
I have a problem with the latest Fedora. Installed it cleanly on a machine with Gigabyte H55M-S2 with Intel Core i3. There seems to be no sound and I checked to see if anything is muted but is not. The manual says that the sound chip is ALC888B so this could be the first problem. Any ide how I can make it work? Here is a dump of some things on my system.
Code: [weaz ~]$ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
[weaz ~]$ uname -a
Linux EarthwormJim 2.6.35.6-48.fc14.i686 #1 SMP Fri Oct 22 15:34:36 UTC 2010 i686 i686 i386 GNU/Linux
[code].....
View 6 Replies
View Related
May 17, 2011
I have ubuntu 10.04 on an acer aspire with the Intel Corporation Mobile 915GM/GMS/910GML Express Graphics Controller. According to glxinfo | grep direct, direct rendering is enabled. I'm trying to watch some anime films in .mkv format. I have tried vlc and the stock ubuntu player. The video is choppy with lag between audio and video. How I can diagnose the problem?
View 2 Replies
View Related
Apr 22, 2011
It gets stuck at the splash screen(the ubuntu logo) However it can boot in failsafe graphics mode and it boots with no problem if my second display is connected. It freezes if I try to change my display settings and it tells me my graphics card is not recognized. I'm using Lucid Lynx. I tried to do a fresh start but grub loads before the ubuntu cd and/or usb drive.
View 2 Replies
View Related
Mar 14, 2010
I just got nexuiz and i have had this problem,
Quote: Using Linux I only see the map but no players and items.
I need to update drivers for my Mobile intel 4 series express chipset family. I've also had 3d issues with Guild wars on Wine.
View 7 Replies
View Related
Apr 24, 2010
I've got: Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller as vga screen, and I would like to be able to change brightness and contrast.
View 1 Replies
View Related
May 3, 2010
Noob to Ubuntu here and I cannot access my wireless connection. It is working fine right now (wired) but I am using the TV stand as my computer desk right now so... not very practical. I tried following the "howto post a wireless issue (ticket)" but there was too much information for me to be able to put on here.
I have my SSID and my WEP. I am on Verizon DSL (only provider in my area). I tried using the wireless setting in network connections and I tried using DSL. I assumed that SSID+Password=Yay the internet works! but apparently not.
View 2 Replies
View Related
