Ubuntu Networking :: Intel Mobile Chipset 4 Series / 10.04 / HP DV6-1030us (Wireless Connection)?
May 3, 2010
Noob to Ubuntu here and I cannot access my wireless connection. It is working fine right now (wired) but I am using the TV stand as my computer desk right now so... not very practical. I tried following the "howto post a wireless issue (ticket)" but there was too much information for me to be able to put on here.
I have my SSID and my WEP. I am on Verizon DSL (only provider in my area). I tried using the wireless setting in network connections and I tried using DSL. I assumed that SSID+Password=Yay the internet works! but apparently not.
View 2 Replies
ADVERTISEMENT
Mar 14, 2010
I just got nexuiz and i have had this problem,
Quote: Using Linux I only see the map but no players and items.
I need to update drivers for my Mobile intel 4 series express chipset family. I've also had 3d issues with Guild wars on Wine.
View 7 Replies
View Related
Apr 22, 2011
It gets stuck at the splash screen(the ubuntu logo) However it can boot in failsafe graphics mode and it boots with no problem if my second display is connected. It freezes if I try to change my display settings and it tells me my graphics card is not recognized. I'm using Lucid Lynx. I tried to do a fresh start but grub loads before the ubuntu cd and/or usb drive.
View 2 Replies
View Related
Apr 18, 2010
I'm a Fedora 12 user on an HP Pavilion dv4 laptop. I'm currently using kernel 2.6.32.11-99.fc12.x86_64, graphics driver xorg-x11-drv-intel-2.9.1-1.fc12.x86_64, and mesa 7.7-4. My graphics card is an Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07).
I've been having some problems getting my 3D acceleration to work. Although it worked correctly in Fedora 11, I have not been able to get it to work yet in Fedora 12.
The output of glxinfo shows:
Running glxinfo with LIBGL_DEBUG=verbose shows:
I found a similar message here: [url]
However, I'm not sure if this is the same problem I have. What does the drm_intel_bo_busy message mean?
View 6 Replies
View Related
Jul 22, 2010
I am new to Ubuntu and I have problem with wireless connection. I could not find any wireless connection at all. I am now using wired connection. Sony Vaio SZ series, Intel Corporation PRO/Wireless 4965 AG or AGN My software details are:
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]....
View 1 Replies
View Related
Aug 10, 2009
Perhaps someone has run across this problem I loaded CentOS 5.3 on an AOpen MP45-BDR workstation. It uses the Mobile Intel 4 Series Express Chipset for the video graphics. It is officially identified as: GM45 chipset (Intel GMA X4500 MHD).
There are two problems. Using the "intel" video driver, the X11 server does not appear to support digital video cable (DVI interface). It is also stuck in 1024x768 resolution and I want it to display in 1280x1024 resolution. Using a DVI cable, the system boots and displays properly (GRUB and boot messages) until the X11 server starts, then the signal is lost. The system is configured with a dual boot (Windows XP Pro) and Windows operates properly and supports all of the features of the video graphics chipset (DVI and full resolution). So the hardware is ok.
The "intel" video driver has a description of "Experimental ..." so maybe there is an update to this driver or a replacement driver that supports this chipset. I checked the buglist and found CentOS bug ID 2951 which is somewhat similar. The user was utilizing the "intel" video driver and it locked his system but changing the driver to i810 was a work-around. My system does not lock. I did try the i810 video driver but the X server did not like it - it would not start. This makes sense since the description of this driver specifies support for the older Intel onboard chipsets.
[Code]...
View 1 Replies
View Related
Aug 28, 2010
I am not able to connect to a wireless network with the HP mini 110 series. When going to the wireless network menu, no networks shows up. if the solution could be described in a very easy "how-to" or just be made into a patch (if there is pathes on ubuntu) it would be nice.
System specifications from HP:
<li style="font-weight: normal; margin-top: 10px;"> Intel(R) Atom(TM) N455 (1.66GHz) + Intel(R) Graphics Media Accelerator 3150 [For Mobile Broadband] <li style="font-weight: normal; margin-top:
[Code]....
View 1 Replies
View Related
Feb 7, 2009
I have an intel 5300 wireless chipset which is not supported in kernel 2.6.25. I am currently using opensuse 11.0, I downgraded from 11.1 since I faced so many other problems. can I setup my wireless driver under kernel 2.6.25? if so, how could i do this?
View 7 Replies
View Related
Apr 13, 2010
Ubuntu 9.10 working great. Installed Orange 515m as per fix shared on this and other forums; however while it works great at home, it will only 'connect' once at work - on subsequent attempts it connects, but browser etc behave as though they cannot find the modem and I cannot make further connections via gmail and Firefox. I had just made the swap from Win 7 to Ubuntu 9.10 for work as well as home, but I cannot be in the position of being unable to access my emails and so swapped my hard drive back to Win 7 drive today
View 1 Replies
View Related
Nov 12, 2010
I have a problem with the latest Fedora. Installed it cleanly on a machine with Gigabyte H55M-S2 with Intel Core i3. There seems to be no sound and I checked to see if anything is muted but is not. The manual says that the sound chip is ALC888B so this could be the first problem. Any ide how I can make it work? Here is a dump of some things on my system.
Code: [weaz ~]$ lspci | grep Audio
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 06)
[weaz ~]$ uname -a
Linux EarthwormJim 2.6.35.6-48.fc14.i686 #1 SMP Fri Oct 22 15:34:36 UTC 2010 i686 i686 i386 GNU/Linux
[code].....
View 6 Replies
View Related
Dec 30, 2010
I want to connect to a 300mbit network (802.11n). With Windows (the same Computer) I am able to connect with full speed, but with Ubuntu Maverick (64bit), and a lot of other distros I tested, I am only able to connect with 54mbit. The builtin wireless network card is an Intel Corporation Centrino Ultimate-N 6300 (rev 35). Is this a driver Problem? I updated to kernel version 2.6.37-rc2 via ppa sources, but with no luck. I tried to extract the windows driver and started it with ndiswrapper, but i properbly made somethng wrong, because the card did not show up, though ndiswrapper said adapter available... oO?
View 2 Replies
View Related
Mar 26, 2011
I've reinstalled Slackware 4 times today because of things I've messed up along my way, after upgrading the linux kernel I've had issues with getting back to desktop, so I'm on a clean slate right now with the exception of installing wicd. I need help since wireless is not working.. My wireless worked fine out of the box with Ubuntu,I don't understand why it is not working now... Using Slackware 13.1, Kernel 2.6.33.4
Code:
bash-4.1# ifconfig wlan0 up
SIOCSIFFLAGS: No such file or directory
[code]....
View 13 Replies
View Related
Oct 17, 2010
i am using samsung S3310 with aircel when i am connecting new mobile broadband connection my device is not identifying ,so that i cant connect Internet.but everything okay i mean settings in mobile and pc. for same connection i used Nokia mobile its identified and Internet was connected but samsung mobile is not identifying in terminal i typed LSUSB my device is shown in that.
View 9 Replies
View Related
Jun 13, 2011
Trying to get this working via wireless connction with 11.04. So far I've managed to install (correctly I think) hplip-3.11.5.run. If I select what I think is the correct option, when it gets to the configuration proceedure, it asked me to temporarily connect via usb. However it doesn't see the usb connection when prompted so I can't complete the configuration. If I configure as a usb printer, the first option, it does see the connection and it prints a test page fine. Tried the other options as well but no joy. Wireless connection to windows laptop and main windows pc is working fine.
View 1 Replies
View Related
Aug 29, 2010
I just want to tell everyone how good the Garmin/Asus A10 mobile phone is as an internet modem.I am in Australia and Mobile internet is an expensive thing to have. cheapest is dodo but i had a few problems trying out a friends usb modem.Anyway i was in the market for a Gps phone and discover this one. it is Android phone and pretty cheap so far it is very good gps, camera, mp3, and phone is excellent.BUT here is the clincher. when you plug it into the computer, the phone screen lights up and gives you 3 options.
View 1 Replies
View Related
Jul 6, 2009
Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05) is not working on centos5.3
# uname -r
2.6.18-128.1.16.el5
# lspci | grep Wireless
0b:02.0 Network controller: Intel Corporation PRO/Wireless 2200BG [Calexico2] Network Connection (rev 05)
[Code]....
View 3 Replies
View Related
Aug 18, 2010
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
View 8 Replies
View Related
Oct 30, 2010
It always fails when I try the sound card test. It says like the system cant detect the sound card.
Sound Card: 5 series / 3400 series chipset high definition audio
Module: snd-hda-intel
After searching about the issue, I found the information that installing kmod-alsa-PAE-1.0.20-1.el5.elrepo.i686.rpm and kmod-alsa-1.0.20-1.el5.elrepo.i686 would solve the problem.
But even I downloaded and installed them, nothing changed.
== BEGIN uname -rmi ==
2.6.18-194.17.1.el5PAE i686 i386
== END uname -rmi ==
== BEGIN rpm -q centos-release ==
centos-release-5-5.el5.centos
== END rpm -q centos-release ==
== BEGIN ls /etc/yum.repos.d ==
CentOS-Base.repo
CentOS-Media.repo
elrepo.repo
epel.repo
epel-testing.repo
mirrors-rpmforge
rpmforge.repo
rpmfusion-free-updates.repo
rpmfusion-free-updates-testing.repo
rpmfusion-nonfree-updates.repo
rpmfusion-nonfree-updates-testing.repo
== END ls /etc/yum.repos.d ==
== BEGIN lspci ==
~
00:1b.0 Audio device: Intel Corporation 5 Series/3400 Series Chipset High Definition Audio (rev 05)
~
== END lspci ==
== BEGIN lspci -n ==
~
00:1b.0 0403: 8086:3b56 (rev 05)
~
== END lspci -n ==
View 13 Replies
View Related
Aug 4, 2010
I need help with connecting to cdma mobile broadband for a tethered samsung phone. When I first installed Suse the phone icon on the network manager icon was all i needed to do to connect to the cdma network.After rebooting later the icon is gone and i cannot manage to connect. The connection is still there, but it is as if the computer no longer recognizes my phone as a modem. Well sense i just installed i figured lets try reinstalling to see if it was a bad installation. It happened exactly the same again. If anyone has any idea how to get network manager to allow me to connect to the internet again i would be grateful.
specs:
toshiba satilleite l305
Suse 11.3
Samsung R560 (Samsung Cdma Technologies)
View 6 Replies
View Related
Feb 22, 2010
Are Intel wireless cards compatible with non-intel-based laptops? In my case I wish to upgrade the current Atheros-based mini pci express wifi card with the Intel 4965agn. It is an Asus 4520 with an AMD Athlon X2 processor and nvidia nForce chipset.
View 1 Replies
View Related
Jun 21, 2010
It looks like my laptop's wireless chipset (Broadcom) has/is dying. It won't work anymore on my Lucid install whereas it was working perfectly. The warrenty is long expired.
lspci brings up nothing about it anymore, it once did.
I booted my laptop into Win7 and it no longer finds it either. The manual slider switch on my HP Pavillion dv6000 is in the on position but the light is yellow.
It will very rarely work on Win7 now.
I can't afford a new laptop just now so it looks like I need an external wireless adaptor. I have (open busses) USB, cardbus/54, and a small firewire port. It does not pcmcia or other busses.
Any particular chipsets to look for or avoid?
View 4 Replies
View Related
Feb 22, 2011
I am using open suse 11.3 with kernel 2.6.34 KDE is 4.4.4, I have Lenovo G550 laptop My system sometimes detects and connects the modem to internet and sometimes its doesn't detects and I am unable to connect to internet I have all the updates installed. Because of this I have to use Forbidden OS (windows)
View 2 Replies
View Related
Mar 11, 2011
On my Lenovo T410 (openSUSE 11.4 KDE - 64bit) I have mobile broadband. Gobi-loader is installed and working properly. However when I try to setup mobile broadband connection the KDE Control Module crashes. Tried many times also after reboots, though KDE Control Module keeps crashing.
View 6 Replies
View Related
Sep 2, 2010
I finally got around to setting up my HP Photosmart c4580 AIO printer today to print wirelessly so that I don't have to be tethered to it with a USB. I found there are many different ways of doing this, each with limited success. So I took a crack at it and this is how I got it to work. (Just an FYI, I don't think that it matters but I am running Ubuntu 10.04 64bit.) Note: I have put in screen shots of the important steps. Also, I have linked at the bottom all the relevant shots. In a terminal type
Code:
hpsetup
After pushing enter a GUI will pop open call "HP Device Manager - Setup". There are four radio buttons, I selected the "Wireless/802.11 (requires a temporary USB connection and is only available for select devices)" one and then clicked Next.
Clicking Next opens a new window for Wifi Configuration. Read what it says (Which is; after configuration setup will continue, this configuration may not work, and connect your printer to your computer by a USB cable!) Now click "Next". Assuming you haven't forgotten to plug your printer into your computer (and turn it on) you will get a "Discovered Wireless Capable Devices" list with something on it. If you do not have anything listed under "Model" and "Device URI" check all your connections and the power to your printer and click refresh. If still nothing I am sorry but this setup has failed you, but if you are lucky and something shows up, click on it and then click next. You have to have wireless internet to continue. The step you are on now has you select your wireless internet connection. Find your's and click next.
Now in the next screen you have to enter in your password for your wireless internet, then push connect. Once you connect you have now just given me access to your online banking and I am withdrawing money as you read this! I'm probably just kidding! I just wanted to make sure I haven't lost you yet. But you do want to enter your password and push enter.
After you push connect you should get a little 'progress' screen. After that is done loading you will see a screen that looks like, Now on a piece of paper or something else, write down your hostname and your IP address. After you have done that unplug the USB from your computer and click finish. Now what happens next, I could not explain. But you remember earlier the wizard said that setup would continue after configuration? Yeah well it didn't for me. And here is what it looked like.
Notice no printers available to select, and even in the terminal it shows an error. Either way, we have the information that we need to finish things up outside of this 'hpsetup' wizard. So just click cancel, close the terminal, and go back to the desktop. Now on your desktop go to System>Administration>Printing That will open a window that shows your current printer profiles. Click the add button to get a screen that looks like this,
Click the plus sign + next to "Network Printer" then click on "Find Network Printer". Now on the right half of that window there is a text box labeled "host:", enter the IP address that you copied down earlier and click the button that says "Find". Once clicking "Find" , one of two things will happen; (1)It will recognize it right away, locate the driver and take you to this screen, after clicking "forward".
or (2) It will take you to a screen showing the host name and the port number. If that happens, no big deal, just click "forward" to get the above screen. Or (3) It will not recognize the IP address that you entered. If this is the case, type in the host name you copied down earlier and click find, then click "forward" to get to the above screen. Or (4) It will not be able to locate a suitable driver. If this last scenario plays out for you then I am sorry but I don't know what to do. So lets just hope that doesn't happen. Alright now that you are on the above screen. Type in a name that you would like your computer to call your printer.
Then click "Apply". Once you click "Apply" that window will close and it will take you back to your printer list. You should notice a new printer in your lineup. Also, it is asking you if you would like to print a test page. Before you pick one, double check that your USB cable is no longer plugged in to your computer from the printer. Now, clicked "No" or "Yes". I chose "No" because test printing takes up a lot of ink. Instead of the test page I just went to my gmail and printed an e-mail. And guess what?! It worked!
View 4 Replies
View Related
Jun 29, 2010
No wireless networks detected with AR5001 chipset
View 1 Replies
View Related
Aug 18, 2010
this is my first attempt to get into Linux (10.04 Lucid Lynx), and I'm eager to learn. The problem is however that i can't connect to the internet using my USB wifi dongle (Jensen 25150). I've tried what this link says:I've tried to blacklist rt2800usb, rt2x00lib, rt2x00usb and rt2870sta and to load "/etc/modules/rt3070sta", but no luck in that, so I simply do not know what to do next. Perhaps I haven't blacklisted them the right way? I've typed in the commands and saved Gedit and closed it. Is that the right way?
View 2 Replies
View Related
Mar 6, 2010
I have bought reliance netconnect broadband+ 3.1 Mbps connection. I am provided Huawai EC1260 device to make the connection.But using ubuntu 9.1 I am not able to make the connection work. I have tested the device in windows XP and it's working fine there. I don't want to use windows and desperate to establish the connection in Ubuntu 9.1.
View 3 Replies
View Related
Jun 24, 2010
Could people with Chipset : Intel i945PM confirm whether they can use 4Gb ram. I came across lot of posts that their sys will not go beyond 3.2Gb even when they use PAE enabled kernel or 64bit OS. I have this chipset and 4Gb ram and does not matter what I use it will not show more than 3.2Gb. I know that lot of 1st gen netbooks used the same chipset.
I read on some forums that it's a chipset limitation, but intel documents do not say this instead they say that it should support up to 4Gb.
View 5 Replies
View Related
Jul 17, 2010
Do you guys remember the inability for lucid to boot with some intel graphics cards?
http://ubuntuforums.org/showthread.php?t=1466337
http://ubuntuforums.org/showthread.php?t=1472282
Anyway I used a workaround to get it working on my Toshiba Portege laptop. However from it stemmed slower graphics, no splash, et cetera. That didn't worry me too much. However, I am now at the stage where I am getting arrays of different issues (that don't necessarily relate) and I would like to just have a nice clean install. I have been upgrading since 8.something and I long for freshness. My files are allready off.
Has anyone patched the kernel or anything? I'm purely a newbish end user and have not been following launchpad or anything. I did the workaround the week of the release. any fixes floating around? If not, I'll go back to 9.10.
View 9 Replies
View Related
Jul 26, 2011
I've got a Laptop with Intel video chipset. I've got a full slackware 13.37 installation and I'm using the huge-smp kernel all though it's not recommended. But I don't think the issue is kernel related. The problem is that it detects that there is a monitor connected to the s-video connector, but there is no picture on the screen. It doesn't matter what mode I use, but ideally I want cloning.
What happens when I use KDE and krandertray (or system-configuration for that matter) is that I can choose resolution and everything but no picture shows up on the TV. When I press the "Identify monitor" (Or something) button both the "1 TV1" and "2 LVDS1" shows up on the same monitor (laptop). That is weird.
Has anyone experienced anything similar or could point me in some direction as to what could be done?(I haven't had the chance to test modifications to xorg.conf quite yet, but I guess that should work. However, I think it's worth it to get rid of this bug)
View 7 Replies
View Related
