Debian Configuration :: Graphics:No 3D. Intel Corporation Mobile GM965/GL960?
Mar 1, 2010
I have a fairly new laptop, 2*1.8 Ghz, but when I try to run games more advanced than pac-man, it's about 1-0.5 frames / second. This doesn't seem right. I've goggled it, and found a few posts from 2008-2009, but nothing that actually helped. Does anyone have any idea, as to what might be wrong? If anyone has this card, I'd like to see what you have in your /etc/X11/xorg.conf file...
@art:~$ lspci -nn | grep VGA
00:02.0 VGA compatible controller [0300]: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller [8086:2a02] (rev 03)
View 14 Replies
ADVERTISEMENT
Jun 29, 2011
I have a problem with compiz and this card, after few weeks suddenly it doesn't work with ubuntu, I always had troubles with this kind of cards, I was always able to solve it by this forum but this time I gave up.
The driver for GM965/GL960 is working perfectly but the compiz effects although they are enabled they are not applied to the desktop environment.
The compiz-check output is:
Code:
Gathering information about your system...
Distribution: Ubuntu 11.04
Desktop environment: GNOME
Graphics chip: Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (primary) (rev 03)
Driver in use: fbdev
[Code]...
View 2 Replies
View Related
Apr 22, 2010
About a year ago, I installed ubuntu on my ThinkPad X61, which was running windows. I basically just overwrote the hard drive, assigning one partition to the install. The graphics have always been a little buggy when it comes to 3d rendering or flash. Flash graphics flicker a lot and 3d rendering leaves trails or doesn't show up at all. Is there a way to configure the graphics card? I'm completely unexperienced when it comes to graphics cards and don't know where to start. I don't even know how to access its settings.
View 1 Replies
View Related
Apr 30, 2011
My lap has a "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)" video card, and never took the 1280x800 resolution (that I had on windows). I searched a lot, and I installed a driver from the package manager (can't remember the name ...). Well, restart, and it's stuck at the finish of fedora loading process (a blank line).
I can access to the terminal (ctrl + alt + f2) and modify kernel parameters. By the way, on gnome I could't enter to "Desktop Effects" (it threw an message like "can't enter 3D Acceleration")
View 2 Replies
View Related
Jul 14, 2010
Can someone give me clues about adjusting my Ubuntu Lucid X11 use of my Intel video hardware? My laptop has video hardware identified as follows:( output from sudo lshw)
Code:
*-display:0 UNCLAIMED
description: VGA compatible controller
product: Mobile GM965/GL960 Integrated Graphics Controller
vendor: Intel Corporation
physical id: 2
bus info: pci@0000:00:02.0
[Code]...
Q3: The lshwoutput shows two displays, display:0 and display:1. Can someone tell me why two and how to make use of both of these? NOTE -- The existing forum entries are mostly from April 2009 or talk about Compiz issues. While Compiz will squeeze video hardware pretty well, I use a tablet-PC and so far, Compiz features do not play well with tablet features.
View 8 Replies
View Related
May 3, 2010
I just upgraded to 10.4 lts, and compiz stoped working. EDIT: lspci | grep VGA gives me:
Code:
00:02.0 VGA compatible controller:
Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)
If I try to run it from terminal i get:
Code:
Xlib: extension "GLX" missing on display ":0.0".
Xlib: extension "GLX" missing on display ":0.0".
[Code]...
View 6 Replies
View Related
Apr 20, 2010
I cant install or do to work the compiz...
my driver is Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 0c)
what can i do to have all effects and working fine?
View 12 Replies
View Related
May 7, 2010
When trying to install Lucid on my HP Compaq 6710b (INTEL Mobile GM965/960 graphic controller) using the alternate i386cd with an usb pen i (re-)experiencing (known from the Jaunty installation) the following problem:Boot from USB (works) Select language (works) Choose to install ubuntu (works) Removing quit from the boot options, hit enter, see some output (works) Starting the installation interface (fail) The screen wents to black, but system seems not froozen. What i've tried to fix this issue:fb=false as bootoption (worked in jaunty, does not work with lucid) frambuffer=false
fb=off
debian-installer/framebuffer=false
vga=123, tried all of the offered modes
vga=771 (get some screwed up output on the screen, which i guess from that the system/machine is not frozen)
i915.modeset=1
i915.modeset=0
xforcevesa etc
Anyone managed to install Lucids with INTEL graphics + the alternate cd? PS: I need the alternate cd to setup an encrypted system. PPS: Just tested the desktop i386 image which works flawlessly.
View 4 Replies
View Related
Jul 20, 2010
Ok I am still having this issue using the intel driver in gentoo. xf86-video-intel is already installed
I followed this guide but still no luck: [URL]
The problem is, when using "startx" the screen goes black and is frozen.
Xorg works fine with the vesa driver but is horribly slow.
[Code]...
View 3 Replies
View Related
Jul 18, 2011
[code]...
Just got World of Warcraft Installed and when I start the game after I get past the 2 cinema's while I'm trying to click yes on the rules the screen seems to bee flashing over and over and over. I was thinking maybe the 3d accelerator isn't installed or maybe I need to install something because its Intel?
[code]...
View 2 Replies
View Related
Apr 16, 2011
I have an Acer Aspire TimelineX 4820TG. I'm running Wheezy and I can't seem to get switcheroo working correctly. I was running Squeeze, then upgraded to Wheezy because it had a kernel over 2.6.33 with switcheroo built in. Below is the layout of my build...
(~)$ uname -a
Linux skipjack-debian 2.6.38-2-686 #1 SMP Thu Apr 7 05:24:21 UTC 2011 i686 GNU/Linux
(~)$ lspci | grep VGA
00:02.0 VGA compatible controller: Intel Corporation Core Processor Integrated Graphics Controller (rev 18)
01:00.0 VGA compatible controller: ATI Technologies Inc Redwood [Radeon HD 5600 Series]
[code]....
View 5 Replies
View Related
Apr 18, 2010
I'm a Fedora 12 user on an HP Pavilion dv4 laptop. I'm currently using kernel 2.6.32.11-99.fc12.x86_64, graphics driver xorg-x11-drv-intel-2.9.1-1.fc12.x86_64, and mesa 7.7-4. My graphics card is an Intel Corporation Mobile 4 Series Chipset Integrated Graphics Controller (rev 07).
I've been having some problems getting my 3D acceleration to work. Although it worked correctly in Fedora 11, I have not been able to get it to work yet in Fedora 12.
The output of glxinfo shows:
Running glxinfo with LIBGL_DEBUG=verbose shows:
I found a similar message here: [url]
However, I'm not sure if this is the same problem I have. What does the drm_intel_bo_busy message mean?
View 6 Replies
View Related
Mar 11, 2011
Does vaapi support the intel gm965 video card?
View 6 Replies
View Related
Mar 3, 2011
Just did a clean install on a Dell Latitude E6400 of Slackware 13.1 and, for the most part, all is working great. Got wicd installed and wireless came right up, nvidia drivers installed and video is fantastic, but for some reason my wired connection isn't happening. The device is detected, but I can't get an IP.
Code:
00:00.0 Host bridge: Intel Corporation Mobile 4 Series Chipset Memory Controller Hub (rev 07)
00:01.0 PCI bridge: Intel Corporation Mobile 4 Series Chipset PCI Express Graphics Port (rev 07)
00:19.0 Ethernet controller: Intel Corporation 82567LM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801I (ICH9 Family) USB UHCI Controller #5 (rev 03)
[Code]...
View 14 Replies
View Related
Jun 28, 2015
I just installed Debian 8.1 with Mate desktop environment. I have a laptop with Intel® HD Graphics 5500.When I try to play a game like Left 4 Dead 2 or Torchlight 2 I get extremely low FPS.I also have Ubuntu 14.04 Mate on another partition. The games run fine there.I don't understand why this big difference. Maybe I have to install or configure something..
View 4 Replies
View Related
Jan 16, 2010
what is really a rant disguised as a question, but does anyone have this combination working? My NetGear router shows the connection as allowed from the MAC address in the router logs, And I can see the network I want to join in the list of visible networks from the laptop, but dmesg shows Ubuntu disconnecting with
WPA-PSK [TKIP] only:
wlan0: disassociating by local choice (reason=15)
WPA-PSK [TKIP] + WPA2-PSK [AES]
wlan0: disassociating by local choice (reason=3)
I'm sure there is a simple explantion that has been sufficiently buried somewhere but after several hours of googling and searching the forums here I can't find it. Anyone want to help out an old man RTFM?
I'm getting really disappointed here lately - things are getting worse, not better. In my case in particular I have this laptop with supposedly open and supported drivers and they don't work, however, the exact same distributuon on a Dell D830 with a broadcom NIC does. under 8.10 and 9.04 this worked out the box - just logged in, gave the PSK and away we went. I can't see the attachment I just uploaded so to include the information requested in the "how to get help" post, I'll put it all here inline...
Code:
Machine Brand and Model (PC/Laptop): Lenovo R61
00:00.0 Host bridge: Intel Corporation Mobile PM965/GM965/GL960 Memory Controller Hub (rev 0c)
00:01.0 PCI bridge: Intel Corporation Mobile PM965/GM965/GL960 PCI Express Root Port (rev 0c)
00:19.0 Ethernet controller: Intel Corporation 82566MM Gigabit Network Connection (rev 03)
00:1a.0 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #4 (rev 03)
00:1a.1 USB Controller: Intel Corporation 82801H (ICH8 Family) USB UHCI Controller #5 (rev 03)
[Code]...
View 1 Replies
View Related
Aug 29, 2011
I installed Fedora 14 on my new PC but I don't have network connection. In fact, I hit the command "lspci" and the prompt return :
Code:
Ethernet Controller : Intel Corporation 82579V Gigabit Network Connection
So, I created a ifcfg-eth0 file on /etc/sysconfig/network-script because it doesn't exist :
Code:
DEVICE=eth0
TYPE=Ethernet
BOOTPROTO=dhcp
ONBOOT=yes
Then, I restart network service, but eth0 is down, no device found for the connection eth0.
View 10 Replies
View Related
Apr 1, 2010
I have been getting from my wireless adapter. This has been going on for quite some time but only now am I able to see a pattern. The behavior seems to be the following: Start up, connects to network and work fine until I suspend my machine. On wake up, it works again but after a seemingly random amount of time the connection is lost and I can no longer find any networks. Attached is dmesg output after startup and connecting to a wireless network (dmesgAfterConecting.txt) and the same after the connection has been lost (dmesgAfterConnectLost.txt). I get this error which seems important:
[Code].....
View 1 Replies
View Related
Sep 20, 2010
my platform Centos 5.3
i did the following
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
Code:
[root@localhost ~]# lspci | grep Wireless
0c:00.0 Network controller: Intel Corporation Wireless WiFi Link 5100
[Code]....
View 3 Replies
View Related
Aug 31, 2015
I have Intel HD Graphics video card on my laptop using OpenGL 3.0 with Mesa 10.3.2, but I need OpenGL 3.3.
Can I upgrade/enable OpenGL >=3.3 on Mesa for my GPU for Debian 8.1 Jessie? How can I do that?
Output of glxinfo | grep OpenGL:
OpenGL vendor string: Intel Open Source Technology Center
OpenGL vendor string: Intel Open Source Technology Center
OpenGL renderer string: Mesa DRI Intel(R) Ivybridge Mobile
OpenGL core profile version string: 3.3 (Core Profile) Mesa 10.3.2
OpenGL core profile shading language version string: 3.30
OpenGL core profile context flags: (none)
[Code] .....
View 2 Replies
View Related
Apr 30, 2011
My lap has a "Intel Corporation Mobile GM965/GL960 Integrated Graphics Controller (rev 03)" video card, and never took the 1280x800 resolution (that I had on windows). I searched a lot, and I installed a driver from the package manager (can't remember the name ...). Well, restart, and it's stuck at the finish of fedora loading process (a blank line). I can access to the terminal (ctrl + alt + f2) and modify kernel parameters. By the way, on gnome I could't enter to "Desktop Effects" (it threw an message like "can't enter 3D Acceleration")
View 1 Replies
View Related
Jul 22, 2010
I am new to Ubuntu and I have problem with wireless connection. I could not find any wireless connection at all. I am now using wired connection. Sony Vaio SZ series, Intel Corporation PRO/Wireless 4965 AG or AGN My software details are:
$ iwconfig
lo no wireless extensions.
eth0 no wireless extensions.
[code]....
View 1 Replies
View Related
Jan 16, 2010
Lets get straight to the point. im using Karmic, and as said by the title my audio card is not detected. lspci -v gives the following:
Code:
00:1b.0 Audio device: Intel Corporation 82801H (ICH8 Family) HD Audio Controller (rev 03)
Subsystem: ASUSTeK Computer Inc. Device 1763
[code]....
View 5 Replies
View Related
Nov 30, 2014
I have an HP pavilion laptop with core i5 4210U that has intel HD4400 graphics. I installed debian wheezy 7.7 after shrinking win 8 and freeing 350GB for debian. I went through the hurdle of making a UEFI bootable USB drive and the system dual boots fine. But once I boot debian, I get all the run time messages and then login prompt flashes and the whole screen is blank except for a prompt on top left. I can open a terminal but that's about it. I'm unable to remotely login (connection refused) from either windows using moba terminal or another debian machine.
I searched the internet and found : [URL] ....
I tried the apt-get but it failed saying:
Code: Select allE: The value "wheezy-backports" is invalid for APT::Default-Release as such a release is not available in the sources
In case I have to install Debian testing version that some said worked, how do I get rid of my current installation, which is UEFI? Do I just erase its partitions in windows? Then what happens to its UEFI boot manager? Just leave it there to rot? If I install again with debian testing version, I envision some problems of the grub UEFI boot manager thinking that the debian 7.7 is still there and try to boot to it. I do have the partition images in partition manager home version 12 so I could just restore the UEFI partition.
HP Pavilion 15
Core i5 421-U
4GB DDR3L
750GB WD hard drive
15.4" 1366*786
View 14 Replies
View Related
Mar 26, 2011
I've reinstalled Slackware 4 times today because of things I've messed up along my way, after upgrading the linux kernel I've had issues with getting back to desktop, so I'm on a clean slate right now with the exception of installing wicd. I need help since wireless is not working.. My wireless worked fine out of the box with Ubuntu,I don't understand why it is not working now... Using Slackware 13.1, Kernel 2.6.33.4
Code:
bash-4.1# ifconfig wlan0 up
SIOCSIFFLAGS: No such file or directory
[code]....
View 13 Replies
View Related
Aug 18, 2010
! I'm thinking of buying a corei5-660 on a motherboard with an Intel H55 Express Chipset. Does anyone know if it's fully compatible with OpenSUSE 11.3? I mean video (that comes from the processor, not an off-board PCI), audio (HD Audio), networking (Intel� 82578DC Gigabit), SATA Controller, USB, etc. I've tried to google but didn't find much info so I wonder if anyone is using or knows where I can find more info about it...
I have found this thread on the forums about the H55 chipset: Core i3 Intel Clarkdale graphic controller problem But the problems were facing on 11.2, I don't know about 11.3...
View 8 Replies
View Related
Jan 2, 2011
I've installed Suse linux 11.3 (kernel 2.6.34.7-0.5) on my brand new computer HP all in one 5130. Everything worked incredibly well : Wifi, wireless keyboard and mouse, sound, webcam.. There is only one remaining issue : I get a very poor resolution (1280x1024) instead of the 1920x1080 allowed by the screen. The graphic card is an intel chipset (HD graphics) integrated to an intel core i3 CPU. Here is (part of) the X11.org log :
Code:
X.org X Server 1.8.0
Release Date: 2010-04-02
[ 15.124] X Protocol Version 11, Revision 0
[ 15.124] Build Operating System: openSUSE SUSE LINUX
[ 15.124] Current Operating System: Linux linux-7xhd 2.6.34.7-0.5-desktop #1 SMP PREEMPT 2010-10-25 08:40:12 +0200 x86_64
[Code]....
View 9 Replies
View Related
Feb 17, 2010
I was reading this article on how to fix the sound in Ubuntu 9.10 after upgrading from 9.04 [URL] and when I open GNOME ALSA Mixer, nothing shows up (I have included a picture). I typed in:
[Code]...
View 8 Replies
View Related
Sep 13, 2010
I have just reinstalled testing on a Samsung Q30 and I cant get X to start. I am just left with a blank screen and ctrl+alt+Fn does nothing. I had a previous install of testing that worked fine but it might have been running a previous version of the kernel, or I had installed a bug fix to do with 915resoultion that I can't remember about. Booting off a Slax live cd works fine but I have had similar problems with Knoppix and Ubuntu.
I am running LXDE but I previously tried Gnome and had the same problem. Running xander displays cant open display Running dpkg-reconfigure xserver-xorg returns nothing, as does Xfree86 -configure There is no /etc/X11/xorg.conf or installed by default, I have tried running startx with a custom xorg.conf and the automatically generated one from -configure. The automatic one did not include any resolutions and was configured for a dual head set up although there was only one monitor connected.
I thought it may be the same problem as this:[url]
But I have tried following the bug fixes on that site and I have had no luck.
lspci
Xorg.0.log
View 1 Replies
View Related
Jan 25, 2011
1st post in Debian Forums, just came from Arch...and segmentation fault and wine are the 2 special reasons for my return, it's a great distro but i miss the stable part of the deal.I'm a performance guy and i want to know what you use for mobile broadband connection (USB Pen) with exception of course of network manager, even with 8GB of RAM to deal with i want to keep my Debian Squeeze simple, better said:netcfg / wicd for networkpptp client for vpn........ for mobile broadband
View 4 Replies
View Related
