Ubuntu Installation :: Unable To Load/install 10.10
Nov 2, 2010
I have a Gateway laptop currently running Win Vista Home Basic. I have grown tired of repeatedly reinstalling this OS so I thought I would give Ubuntu a shot. The laptop is running a 1.6 GHz Celeron, 1470 MB of RAM, and has an 80 Gig hard drive. My problem is that I cannot get Ubuntu to load/install. I cannot run it from CD, I cannot setup as dual boot, and I cannot setup as a standalone. I am not worried about wiping out my Vista, as I said I have grown tired of it. OH and I cannot locate my Vista install disk at this time either.
View 6 Replies
ADVERTISEMENT
Feb 26, 2010
I'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.
So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts).
Its so weird though that live version works and the installed version does not.
Here are my specs:
I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.
View 3 Replies
View Related
Oct 14, 2010
I am currently using an Acer Extensa machine with Windows 7 and Ubuntu 10.04 dual boot. I tried to upgrade 10.04 to 10.10 , everything was fine until I am asked to restart. After restart I selected Ubuntu from dual boot menu. It cant load Ubuntu and machine keeps rebooting.
View 3 Replies
View Related
May 6, 2010
I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.
View 1 Replies
View Related
Jul 4, 2010
I had to erase a swap partition on a hardrive that has ubuntu in order to install windows xp on another hardrive. After I did it win XP loads on both hadrives. How do I get to Ubuntu and how can I make another swap without having to reinstall the whole ubuntu?
View 9 Replies
View Related
Mar 13, 2011
I have just installed Ubuntu, now when logging into my laptop i am able to sucsessfully load ubuntu but i am unable to load the original OS (windows 7).
The grub 1.9 bootloader gives me the option
When selecting this option it goes to a black screen with a - in the top left of the screen then the grub screen re-appears
I have ran the boot_info_script.
Code:
Boot Info Summary:
View 9 Replies
View Related
Mar 1, 2010
Not able to install RHEL5 on my pc, I frequently get the page load error 0x30/0x40
View 3 Replies
View Related
Jul 19, 2010
I installed ubuntu 10.04, aftert that i cluld not able to start windows xp,Please find the details about my hard disk
Disk /dev/sda: 40.0 GB, 40020664320 bytes
255 heads, 63 sectors/track, 4865 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[code]....
View 2 Replies
View Related
Oct 18, 2010
I recently upgraded to 10.10 from 10.04 on my x86_64 system. The upgrade went fine except it cannot load the driver for my Matrox M9148. ("m9x")I simply get a "Cannot load driver" error. (there is more to it, will paste when I finish work)Basically the driver is there and in place, it loads it but cannot use it.When I go to reinstall the driver again manually, it dies with an error only supports Xorg up to 7.5So, now I see this is an Xorg and driver compat issue.I have reported it to Matrox and am awaiting a reply.
In the mean time though, since I need my machine working, is there anyway around the issue, or could I even roll back xorg to whatever it was in 10.04 to get the drivers working again?
View 4 Replies
View Related
Apr 24, 2010
I am unable to load Ubuntu onto computer as dual boot or inside windows. Thus scanned the CD and found it has 23 errors.Are these files suppose to be on the CD?casper, .disk, install, install, isolinux, pics, pool, pressed, autorun, md5sum.
View 4 Replies
View Related
Apr 28, 2011
A few days ago I went to perform the Service Pack 1 Upgrade for Win 7. This crashed out with an error. On researching the problem I found a solution to fix the problem by marking the Windows partition as active. I did this (via Computer Mgmt -> Disk Mgmt). This allowed the SP1 upgrade to work, however on reboot I got an error BOOTMGR missing. This I rather rashly resolved by using the Windows 7 install DVD in Recovery mode to reinstall the Windows Boot manager via bootrec /Fixboot I thought I would then be able to use the Opensuse 11.2 install disk to fix grub.
I use the Opensuse install disk and select Repair system -> Expert Mode -> Install New Boot Loader then select Other -> Reread Configuration from Disk. This adds Win 7 back into the grub menu. I then select OK and get the message "the bootloader was installed successfully". The problem then comes when I click my way through OK and Next to finish the install. At the end of the process I get the message "An error occurred during the installation" and I'm no further forward.
FYI the PC has a single SATA disk installed partitioned as follows:
dev/sda1 100Mb Win System Parkition
dev/sda2 Windows NTFS
dev/sda3 Windows FAT
View 8 Replies
View Related
Apr 27, 2011
Being a former user of Fedora, i decided I'd like to give Ubuntu a try and install so i could switch from a windows environment for ruby on rails development.I downloaded the 10.10 ISO and burned the image to a DVD-RW (a cheap one) at 4xI'm deployed in afghanistan right now, and the only decent internet connection i have is in my office (i work in the network administration/operations office as a NETOPS NCO) and even then my downloads rarely exceed 50kbps. I also don't really have the best pick when it comes to writable media, i'm stuck with imation "plus" cd-r's and dvd-rw's.
After i burned the image to disc, i deleted the iso from my computer since i'm genereally not suppossed to keep personal files on work computers.When i boot to the disc it takes about 45 minutes on average to load into the live environment to do the install or try ubuntu, if i select try ubuntu it's another 10 minutes before it's done loading.The install is even slower, generally takes several hours to complete the install, once the install is complete and i select ubuntu in grub, i get a { DRDY ERR } ru When it tries to load ubuntu and kicks me back into the shell. Nothing appears to be wrong with my hard drive, checkdisk finds nothing.
General specs are:Intel Core i7 i7-720QM / 1.6 GHz 8GB DDR3 1333mhz ram2x 500gb hd'sBlu-ray/dvd/cd driveFull specs are at: the laptop is a g73jh-a1http://reviews.cnet.com/laptops/asus...-33950895.htmlI'm downloading the iso again and i'm going to try and burn it to a cd-r at the slowest possible speed, I'm mainly curious if it could be fualt of the disc i burned or if it has something to do with my computer.
View 9 Replies
View Related
Jan 21, 2011
When I installed Ubuntu 10.04 on my pc, I noticed that it required a little more graphics then 9.10. After I logged in, I only see the Ubuntu background, but with nothing else. I really want to use Ubuntu on my computer but it just wont load properly after a full install
View 9 Replies
View Related
Aug 15, 2010
I cannot install Kubuntu (or Unbuntu) 10.4 on my husband's computer. I have spent 5 hours on this and cannot get anywhere. I am deeply frustrated. The iso I burned to CD is good (works on 2 other computers). His computer will not boot from USB, no matter what I do to the drive order in BIOS. After loading the blue screen with the Kubuntu logo on it (and the blue-white dots), the screen changes to black and shows the following text:
BusyBox v1.13.3 (Ubuntu 1:1.13.3-1ubuntu11) built-in shell (ash) (initrafs) Unable to find a medium containing a live file system.
He really needs to get rid of WinXP. Kubuntu is what I have on my computer (and love it!). Here is some info about his computer:
OS Name Microsoft Windows XP Home Edition
Version 5.1.2600 Service Pack 3 Build 2600
OS Manufacturer Microsoft Corporation
[code]....
View 8 Replies
View Related
Oct 14, 2010
has anybody tried 10.10 on their PS3 (FW 3.15)? I first ran an update from 10.04 (which was working fine, including ext4 FS), and upon rebooting after the update, all I had was a black screen after PetitBoot. I then tried to do a clean install with the 10.10 PPC+PS3 Alternate CD, but same black screen after selecting any type of install from CD in PetitBoot. I then installed the OtherOS that's on the 10.10 CD (KBoot); same black screen. Went back to PetitBoot and tried the PS3 desktop 10.10 CD; same problem. I was almost ready to give up and reinstall 10.04 when I thought of using the "linux-old" option in PetitBoot. This loaded the newly upgraded Ubuntu 10.10 on my HD, with the difference that it's using kernel 2.6.32 instead of 2.6.35. This works fine. So here's my question (at last ): was the PS3 port of 10.10 tested by anyone before being pushed as a release on cdimage.ubuntu.com, or is there an incompatibility with kernel 2.6.35 that was never noticed, except for here where it didn't seem to go anywhere: [URL]? If I'm the only one left on earth with firmware 3.15 and interested in Ubuntu on PS3 at this point.
View 5 Replies
View Related
May 11, 2011
I just installed the newest Ubuntu release through the update manager and, after the restart, GRUB won't load. Before GRUB would normally load I get the message: error: the symbol 'grub_xparts' not found grub rescue> How can I fix this? Background: Running an XP and Ubuntu dual boot with the two OSs on different hard discs.
View 9 Replies
View Related
Oct 13, 2010
I use a ZTE 626 USB modem to connect to the internet (and yes, i am in the wilds of nowhere!) which using USB-modeswitch 1.1.0-2 and ubuntu 10.04 works well.
I just upgraded one machine to 10.10 and it included the new modeswitch 1.1.4 which does not work, the modem is never discovered. I searched around and found that this is a bug in the latest modeswitch and apparently if you back down to version 1.1.3 it works.
So, i have two questions,
first, where can i find version 1.1.3 of modeswitch. I have searched and cannot find older version than 1.1.4 as a .DEB file.
second, i do have a really old version of modeswitch (1.1.0-2) on my hard-drive and have been trying to load my older 1.1.0-2 version and am having real problems with it. I remove the 1.1.4 version and its data using the ubuntu software centre and it looks like it properly is removed. I then click on the .DEB file that contains 1.1.0-2 and it opens the software centre and installs it (the data seems to be automatically loaded as i never have to install that). I then search for modeswitch and the version that has been installed is the newer 1.1.4 one, not the older one i clicked on. I am confused as this computer is not attached to the internet but it seems to find the newer version from somewhere, uses it and therefore does not work. I presume the version 1.1.4 is cached somewhere and i am not able to clear it out.
Incidentally, the source of the information that i have so far is here:
[URL]
From reading this, i do understand that there is a problem, After reading this bug fix I tried editing the config file for the modeswitch modems and changing all of them to the format indicated, but no joy.
View 9 Replies
View Related
Oct 22, 2009
After I do a fresh install of Fedora 10 and reboot the computer, nothing happens. All I get is a blinking cursor at the top of the screen. It's like Grub is messed up and won't load. Grub is installed on the Master Boot Record of the drive I need to boot from.
I have an ASUS P4C800 motherboard with one SATA drive that Fedora 10 is installed on. I also have a HighPoint RocketRaid 1740 SATA RAID controller card. When I take the RocketRaid card out, everything boots like normal, but when it is installed all I get is a blinking cursor at the top of the screen. I need the RocketRaid card because it houses my RAID5 array with all my documents. The reason I got the RocketRaid card is because it has linux support and my motherboard was listed on their compatibility chart. I had this exact same setup running Windows XP and everything worked fine. I did not load any drivers for the RocketRaid card and was going to do that after the system was setup. I don't know if that is the problem since the installer does not see the raid array on the RocketRaid during install. I was thinking that maybe Grub is seeing another disk and doesn't know what to do and sits there with a blinking cursor.
I don't know where to go from here and I am a linux newbie. On a side note. If anyone knows of a good linux book (specifically Fedora), please let me know.
View 7 Replies
View Related
Apr 8, 2010
So, I currently have Ubuntu on my laptop and would like to install F12 instead.I burned a copy of the F12 .iso and set my BIOS to boot from CDROM drive, but Ubuntu continues to load and I can't seem to get the OS to load for a clean install (from the .iso, even after extraction).Unfortunatly, the BIOS will not let me boot from USB otherwise I would try that.Any ideas on what might get this off the ground?
View 8 Replies
View Related
Jun 24, 2010
i try to boot off the cd, it loads vmlinz and init.rd, anaconda starts loading.it mounts the temp filesystem and freezes. i can't choose how to install or anything. nothing comes up graphically.
View 2 Replies
View Related
May 10, 2010
I have laptop ASUS X51RL with Intel pentium dual core inside processor. As mentioned here:I tried to install i386 FC12 on it. When the instalation was completed, there was a message to reboot. So did I, and while the BIOS was still loading, of course, removed the DVD in order not to repeat the instalation. Fedora started loading with the three varioants of the blue color bars and suddenly on the screenappeared a long message finishing with the words: "kernel panic - not syncing: fatal exception in interrupt " and that was all - the system stopped untillo there and never loaded For the last 2 days this is about my 12th attempt to get linux. Before I had tried about over 6 times with ubuntu, finishing the same way after the first reboot, 1 time knoppix and 2 times Debian. Only debian succeeded to load succesfully after its instaltion was complete, but I didnt linke it and a friend of mine strongly recommended me FC12. So what am I supposed to do??? I guarentee, my hard disc is not corruted as I read 1 hundred times on google, I had benn running windows 7 before I started trying to get linux and everything was OK... the install DVD is also OK, I tested it in the same beginning of the instalation and the test was successfull.
View 7 Replies
View Related
Feb 9, 2009
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
View 2 Replies
View Related
Aug 8, 2010
I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,
$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful
[code]....
View 3 Replies
View Related
Dec 25, 2015
Now, my issue is that I have no access to ethernet in my apartment so I need to rely on wifi for my install. But during the install when it is looking for the network hardware it never sees the TP-Link Dongle and never asks if I wan to load the firmware. I even tried it with the CD image that has the non-free drivers included but it never asks for the drivers. Any other distro, like Linux Mint 7.3, sees the dongle fine.
So is there a way to force load the realtek-firmware drivers during install?
View 14 Replies
View Related
Jun 7, 2010
I've got a dual-booting system with Windows 7 and Opensuse 11.2. I had a few other random kernels so I edited /boot/grub/menu.lst to remove them. This was fine after a reboot, then I went to YaST and changed the default boot partition to Windows, because I had edited the MBR and put Windows above the other boot partitions, YaST changed "default" to 0.
Now after a restart the Boot Loader doesn't appear, I just have a flashing cursor. When I try to boot from an OpenSuse installation disc and try repair the Repair Kernel loads but freezes on the OpenSuse splash screen. I've heard this is due to the fact I have an ATI Radeon card, if I hold shift during the CD load to prevent the graphical interface of the CD loading. I can type to boot "rescue" but it freezes on "starting udev...". Essentially I just need to be able to edit menu.lst back to the backup I made or change the "default" value back to 1.
View 7 Replies
View Related
Jul 28, 2009
So I have been trying to install these drivers forever and after going through a million forum posts and Google searches I have been unsuccessful. The process I have been trying starts as such: I hit ctrl-alt-f1 and then login as root. i then change to run level 3 by doing /sbin/init 3. After that's done I cd to desktop and do sh NVIDIA-LINUX-x86-185.18.29-pkg1.run --kernel-source-path /usr/src/kernel/2.6.18-128.2.1.el15-i686
If I don't give it the source path it can't find the source tree. Eventually I get the error: ERROR: Unable to load the kernel module 'nvidia.ko'. This happens most frequently when this kernel module was built against the wrong or improperly configured kernel sources, with a version of gcc that differs from the one used to build the target kernel, or if a driver such as rivafb/nvidiafb is present and prevents the NVIDIA kernel module from
[Code]...
View 5 Replies
View Related
Mar 29, 2010
I am trying to install Fedora 12 using the x86-64 DVD. My problem is everytime I try to install with the normal settings or basic video deriver setting it says "X failed to load" and so Anaconda never loads. How do i fix this problem. I have an Nvidia 7800GTX.
View 1 Replies
View Related
Dec 23, 2015
I downloaded and mounted debian-8.2.0-amd64-netinst.iso on my work machine's VirtualBox v5.0.12 to check out Debian stable/Jessie's installer and clean installation in case I need to do it soon. I like the new installer compared to 11/24/2011 on my old desktop machine. It is much nicer, fancier with its advanced options, etc.
However, I ran into issues with its "Select and Install" part when I selected desktop managers (e.g., KDE and Gnome) and continued. It failed as shown in [URL] .... images. Why? I tried again from scratch and same thing. If I don't select any and just select non-GUI stuff (e.g, SSH and standard system utilities), then it works but I want the pretty GUI stuff.
View 14 Replies
View Related
Nov 26, 2010
I am a brand new Linux user and so far I am really liking the setup, except I am having a big problem. I installed Ubuntu 10.10 from inside Windows 7 Ultimate using Wubi and after restart, I was only able to run Ubuntu for one power off/back on cycle. After I turned it back on, it gave me the option of which OS to boot, and I chose Linux. When I restarted the next time, it just went to the GRUB rescue screen and I cannot load either!
I have tried booting from hard disk and from usb with ubuntu 10.10 on it. Hard disk brings me to the grub rescue screen. USB gets me to the Ubuntu loading screen. The dots progress as if it is loading but I've been waiting 30 minutes with no loading. EDIT: I pressed esc after rebooting (it got stuck again) and here is what it says: (process:347): GLib-Warning **: getpwuid_r():failed due to unknown user id (0) stdin: error 0
View 9 Replies
View Related
Oct 30, 2010
im trying to load videos, its just black, plus the site itself seems to be loading all messed up.
View 5 Replies
View Related
