OpenSUSE Install :: Boot Screen Doesn't Show And Installation Media Won't Load
Jun 7, 2010
I've got a dual-booting system with Windows 7 and Opensuse 11.2. I had a few other random kernels so I edited /boot/grub/menu.lst to remove them. This was fine after a reboot, then I went to YaST and changed the default boot partition to Windows, because I had edited the MBR and put Windows above the other boot partitions, YaST changed "default" to 0.
Now after a restart the Boot Loader doesn't appear, I just have a flashing cursor. When I try to boot from an OpenSuse installation disc and try repair the Repair Kernel loads but freezes on the OpenSuse splash screen. I've heard this is due to the fact I have an ATI Radeon card, if I hold shift during the CD load to prevent the graphical interface of the CD loading. I can type to boot "rescue" but it freezes on "starting udev...". Essentially I just need to be able to edit menu.lst back to the backup I made or change the "default" value back to 1.
has anybody tried 10.10 on their PS3 (FW 3.15)? I first ran an update from 10.04 (which was working fine, including ext4 FS), and upon rebooting after the update, all I had was a black screen after PetitBoot. I then tried to do a clean install with the 10.10 PPC+PS3 Alternate CD, but same black screen after selecting any type of install from CD in PetitBoot. I then installed the OtherOS that's on the 10.10 CD (KBoot); same black screen. Went back to PetitBoot and tried the PS3 desktop 10.10 CD; same problem. I was almost ready to give up and reinstall 10.04 when I thought of using the "linux-old" option in PetitBoot. This loaded the newly upgraded Ubuntu 10.10 on my HD, with the difference that it's using kernel 2.6.32 instead of 2.6.35. This works fine. So here's my question (at last ): was the PS3 port of 10.10 tested by anyone before being pushed as a release on cdimage.ubuntu.com, or is there an incompatibility with kernel 2.6.35 that was never noticed, except for here where it didn't seem to go anywhere: [URL]? If I'm the only one left on earth with firmware 3.15 and interested in Ubuntu on PS3 at this point.
I have been trying to install openSUSE on a dell Latitude XT all day, and every time I tried to live boot, I got a blank screen. I finally decided to do a text install and I got it installed, but now I get the same result from booting off of the splash screen.
I can boot into text mode fine (still) but for whatever reason, it bombs as soon as I tell it to load the GUI. I have a 1.2 GHz Core 2 Duo, 3GB RAM, and an ATI mobility chip (2000 series, maybe?) I had the same problem with Ubuntu, and since I like openSUSE just as well, I figured I'd try it because I at least could do a text install from my liveCD.
i changed the boot up resolution in the boot up loader to 1366*768 (native res of my monitor) the boot option is still set to quiet splash however, instead of showing the progress bar, it would now always display the complete boot up log ( the list of starting services and such) i then manually changed the boot option from to 1024*768 at boot loader screen, and teh splash would show up, but then on next boot up if i stick with 1366*768, it doesnt work again
I'm fairly new to Ubuntu and I like it a lot. However, there's a graphical error which started to happen after the very first bootup. The startup screen (the purple one with the 5 dots that appear) isn't showing anymore. It is replaced by some console technical guff scrolling down my screen (which isn't a problem, because Ubuntu itself works fine, but it just looks a bit rough). Again, on shutdown, it displays some amalgamated mix of more technical jargon, and a terribly lo-res version of the shutdown screen. Is there any way I can fix this?
I can't seem to get Ubuntu to run on my old Dell Dimension 2300. It boots to a purple screen then it goes to a black screen with a load of writing nothing else happens after this screen. [URL] Could someone advise how I can get it to work?
Used to run Gentoo, years ago, getting back on the linux train. Anyways, got a new media pc and am having some troubles getting it to function. I am using ImageWriter, an OCZ Rally 4gb flash drive and have tried both HTTP and BitTorrent downloaded copies of 11.3 with the same md5sum check wrong error. What am I doing wrong? Is it because it thinks it is a CD or am I getting bad copies of the ISO? I am so out of practice I can't remember anything about installation anymore and am at a loss.
I created a Fedora 13 x86 live image on USB using [URL] I've set it to boot using the USB and when it does I see the 10 sec countdown (or the options if I press a key), I tried all the options to boot the image but the screen just turns black for a few seconds and then the the monitor goes into "power saving mode" and nothing happens (I waited like 10 minutes). What's going on? I am trying to install fedora into an empty (secondary) HD, in the main HD I only have a win XP, and I don't want to burn a cd/dvd that's why I am trying to boot the USB.
Ive been using it for a few days and it kept reminding me to update some files. (about 200mb worth) after it finished installing i rebooted but it won't show me a login screen. it only shows me a commmand line. it allows to 'exit' and then it boots windows.
Using tips provided in the "Sticky" posts, I have identified my wireless device -- BCM4322 -- and installed the necessary firmware and drivers. The device appears in Network Manager until system reboot, at which time the "ssd" driver module is loaded instead. After each boot I must execute the following commands to remove ssd and load the Broadcom driver:
rmmod ssb modprobe lib80211 modprobe wl
The Broadcom README file provides directions to load the correct module automatically, but the commands appear to be incompatible with openSUSE 11.4. I'm happy to provide additional detail if needed
I am trying to install the latest openSUSE 11.1 64-bit using an installation DVD downloaded.
I have my boot order set up so that the computer tries to boot from the CD/DVD drive first.
When I restart, I get the following:
0: NO emulation system type 00 1: NO emulation system type 00 Enter a choice:
Regardless of whether I enter 0 or 1, the system boots into the regular Windows vista.
Here are my system details:
Laptop: HP Pavilion dv4t-1300 Entertainment PC. Processor: Intel Core2Duo. OS: Windows Vista Home Premium 64-bit. Memory: 4 GB
It's a new computer with a recovery partition of 13 or so GB and a single partition of (250GB - 13 or so GB). I want to use the openSUSE re-partitioning system during the install.
I did search for this problem. Even though I found some similar problems, I couldn't find anything where, a person couldn't get to the boot screen at all.
I had Vista installed then Ubuntu Grub showed both... then I wanted to try Fedora 13 an after install I had Fedora Bootloader but it only shows Fedora / other and other is Vista... how do I manually enter Ubuntu partition into /boot/grub.conf or should I just reinstall ubuntu grub and hopefully that will pick up vista and fedora? Lost on where to go with this.
I have two optical drives (not SATA) that previously showed up as /dev/hda and /dev/hdb. No longer. I see no mention of them in fstab and catting all the /dev/dvd /dev/cd... /dev/sr.. turns up nothing. If I place a disk with info in the drive nothing appears anywhere I can see (not in dmesg).
K3b tells me no devices found. wodim tells me Detected CD-R drive: /dev/sr1 wodim: Cannot do inquiry for CD/DVD-Recorder. Errno: 5 (Input/output error), test unit ready scsi sendcmd: fatal error CDB: 00 00 00 00 00 00 cmd finished after 0.000s timeout 40s (These are not SATA drives.) I noticed rebooting will show drives if there is media in there. However, that disappears after a while as well. Then inserting and reinserting cdroms gives no messages in dmesg.
I'm trying to install 11.3. The iso install DVD boots up ok, says 'welcome' in far more languages than I understand, I select English & US English then all useful progress stops. It suddenly can't detect my CD/DVD (although it DID when the system booted with the CD/DVD drive selected as 1st device to try to boot). I've tried pushing the button to eject and reload the DVD, no dice. Nothing seems to work, when I finally go for shutdown it suggests I might need to load a driver. My drive is a fairly new plextor px-b940sa.
Searching the plextor corp site for linux turns up zilch as does the knowledge base at novell.com. it's all in knowing the right magics words i suppose. my chip is the intel 6 core. my mobo is asus p6x58d (actually im wondering if it's the culprit because it does some fancy tricks). i tried my store-bought 11.1 suse install disk, it has the same difficulty. i suppose a usb-linked external dvd drive might be the obvious solution (won't cost too much but fairly likely to have some problem).
I have SUSE 11.3 on an Acer Aspire 3620 (laptop). When it boots up, it gets stuck and doesn't complete the process. Can't use safe boot either because I can't get past the login- when I type the password, no keystrokes appear, regardless of the key I strike. Here's how I got into this situation and a little more description of the problem. After my laptop got some nasty bugs that damaged Windows XP so badly that I couldn't use the rescue disk (that I so obediently made per instructions), I bought several linux flavors on Live CD/DVD and decided to go with SUSE. I had been using the Live DVD for about a month and everything worked well so I installed it last weekend (SUSE only -no dual operating system). Everything went well for a couple of days and I even used Yast to get Adobe Flash. Then I plugged in my MP3 Player to recharge it and quirky things started happening.
Once, the computer went in to standby and I couldn't get to the login screen - I started pushing all the keys and something worked. That evening I closed the laptop (so it should have gone to suspend) with the MP3 player attached still, and pulled it out, probably as the computer was going through the motions or shortly thereafter. (My player and usb stick suffer no ill consequences if not ejected properly.) Since then I have not been able to boot up. I powered down several times and tried. It seems to start normally with the green screen and little reptile appearing as the monitoring bar grows. Then it goes black, except the cursor's spinning wheel indicating activity. Then comes back to the green screen, with the bar still increasing and nearly making it to completion. Then the black screen and cursor-- forever. Eventually I can hear that the harddrive is no longer spinning.
Also, when the black screen appears, there is an error message that says that the configuration settings for Gnome Power Manager were not installed properly, which I highly doubt since I had no trouble in the installation, but maybe that is pointing the right direction to the problem. Anyway, now I am back to Live DVD, so that I can surf for the answer to this problem. Least that works! Before installing, when I was using SUSE as a live DVD, it sometimes was a little quirky when I inserted the MP3 Player and USB Stick- sometimes wouldn't recognize them, sometimes would, sometimes wouldn't/couldn't unmount. Firefox also would start crashing after alot of use, but I could reboot and things were fine, so I thought this might just be due to the fact that it was Live and not Installed.
I installed it with the default, KDE. I read another post somewhere with a similar problem in which the author says KDE is very bad with inserted media but I wouldn't know if that's true or not. This is the first time I've used linux, apart from a little bit of experience at work. It really has it's ups and downs, when it was working, it was so exciting, when I got hung up so soon, disappointing. The only thing I can think of to do now is reinstall and tip-toe around being extra careful about the quirks when connecting devices. Not very practical though. Thanks for listening to this long story. Will be trying to get it fixed in the evenings after work EST.
PS IF you can bear to read another line. The live DVD I bought was rather badly scratched and scuffed in my opinion. Although there were no installation errors that I could see, would this have had an unknown immeasurable effect that could account for weird behavior?
Basically I had windows 8.1 running on my fujitsu lifebook A532 laptop and wanted to dual boot kali linux alongside it, however upon installing the linux it deleted EVERYTHING! on my laptop, the grub bootloader only showed kali linux to choose from...
I then decided kali linux is too complicated for me and decided to delete everything and reinstall windows 8 again however I was surprised that my bios screen looks diffrent also I can not edit the boot sequence.
If I press f2 or f12 it takes me to a screen with a tab named Boot menu and its written on it debian and every time I press enter on it it takes me back to this same screen...
I had this corrupted external hdd and so I formatted the main partition on it on windows but messed up in the formatting and ended up having to format the entire thing. I got some weird message about it not being initialized (no not mounted) so I was in compmgmt.msc in windows and right clicked it in device manager and it asked for master boot or GUID I selected the latter and formatted. Worked fine and all for a bit but now it doesn't show up as a drive. I noticed when using compmgmt.msc it showed up that it had installed driver software and was being recognized but in the partition editing area there was nothing on this drive, reinstalling driver software doesn't seem to help. Also GParted wont load up when I have it plugged in and Disk Utility doesn't show it. I am requesting help to fix this problem within Ubuntu 10.10 somehow so I can use it properly.
Can I do a network install using a USB as the boot media. I couldn't find the steps in the long installation help. It explains how to make a livecd boot USB drive but nothing for USB. Please make it clear with exact steps. [URL] says that I have to copy diskboot.img from /Images in install cd but there is no such file. There is a install.img should that be used instead.
Apology for dual post I realized was in wrong place.Created verified 11.3 live CDInserted, restarted, welcome screen, choices next, I choose installation.Kernel loaded then black blank screen guess you call it a freeze upWindows 7 Home Premium 64-bit Edition Partitioned plenty room
I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:
[Code]...
What do I need to do to make GRUB load again upon booting?
I'm using OpenSUSE-11.4+KDE and have not been able to access my Sansa Express drive. I can pull it up part way, but it acts as read only. I'm not sure what settings I may need to make in the Partitioner to fix this.If I boot into a LiveCD of LinuxMint10-KDE and plug it in it is instantly identified as a "Media Device," and I have access into the MTP section of it I believe.
I prefer using Banshee, but will use Dolphin to manual drop files it I can get the Sansa drive to operate as with Read+Write. I've seen this device listed here at "plug and play" [URL]../HCL:Gadgets#Media_Players
I live in a country where 1Mbit broadband is a premium service for large businesses. I am paying a little over $40 a month for a 128k connection with monthly capping. I want to download Fedora but the download is just huge for my connection, especially as it is used for work 14 hours a day. I have attempted the LiveCD and got the 'ext4 cannot be used for boot' error. I also have several other specialised distros on this machine and it's going to be a pain inserting a new boot partition just for Fedora.
Like it is possible with Slackware, can I just download the first CD of the Fedora 11 set and get a minimal install from this or does Fedora need the whole set of disks? Is there a simple enough net install option that I could use instead? I can't understand why they can't just release something like Ubuntu's alternate install CD.
trying to install Fedora 10. I'm novice in linux. Nut tryed some distros before, installation/config, fedora 9, Ubuntu 7-8, Suse 10, mandriva. everything was ok. Now i've new rig:
1 DVD install i386 after booting asks me media from where i want install errors: CDinstallation: No Cd drive with installation media HDD installation: can't find boot image (NTFS C: in winXP). 2 DVD install x86_64 same. 3 NetBootCD 2.2. installed on flash with liveusb-creator. once booted (most progress with this one), started formating process, asked root, after again showed me that no media. after again tried to install on USB error "no boot media on POST screen". 4 Billix downloaded USB version, pated on USB stick edited file , changed mirror from i386 to x86_64 can't boot even. 5 Downloaded fedora 10 Live Gnome desktop slipstreamed onto usb stick with liveusb-creator. booted: showed GRUB boot many. choosing boot or verify and boot fedora three lines on boot loading, after it shows me my Ethernet connection like "100mb full duplex link ready" after nothing only this text stays on desktop.
I ran into a problem the moment i installed 11.1. The GUI wouldn't show up (ctrl+alt+f2 yeilded a black screen with a blinking underscore). Failsafe worked fine, though.
So, i tried entering, one by one, every parameter that was entered in the failsafe boot options. Entering 'x11failsafe' gave me a flawless GUI. So, i opened the '/boot/grub/menu.lst' file and added this parameter in the 'showopts' of the normal mode, to make it permanent. Fine. Now, what exactly have i done?
Note- I use an NVidia 8000 series Graphic card. I'll post more details if you need them.
I upgraded kubuntu from lucid(10.04) to Meerkat(10.10). problem is login screen doesnt show up on boot. A black screen shows, Ctrl-Alt-F1 doesnt show the tty1. Ctrl-Alt-Backspace doesnt work either, neither does Ctrl-Alt-Del.
I switch off the computer and reboot into recovery mode, I get the graphical recovery menu, on choosing boot normally, I get the tty1 login prompt.
Upon logging, I check /var/log/Xorg.0.log.old. There is no error, nvidia 260.xx driver is loaded successfully and all other modules are loaded as well.
I have done 'apt-get update' to see if there is any update in repository but there isnt.
I installed OpenSuSe 11.2 x64 on my PC.It's not work will:After installation, the system auto login KDE GUI.but when I reboot(or shutdown and open) my computer. Message on screen meaning:"can't find bootable partition".My PC's hardwareMother Board: DFI 790FXB-M3H5(South Bridge: SB750)Hard Disk: WD 500G*2 Raid 0(via SB750 Chip function)Oh, I'm sorry, It's Fakeraid, not hardraid.
I'm trying to install OpenSUSE 11.4 (64bit with the server options included) on my Mac (Core 2 Duo 2.0 Ghz with 2 GB memory). So I have sda2 the OSX, sda1 swap, sda3 is the bootcamp (windows), sda4 (ext4) and sda5(ext5). I installed rEFIt 0.14 first, then I reboot with DVD on. The installation setup resized the Windows partition from Bootcamp, and create 3 other partitions (the sda1,4 and 5). At the installation I choos MBR enable and "/" as home enable.
At the end of the installation I have the error about MBR, that can't mount, or create the mount point? I'll double check the exact message. Anyway, when I try to load OpenSUSE, is not working: can not load the system. I tried to find on the installation menu a repair (I thought that I can find an utility to fix the MBR). I don't want to choose other distribution, because I used SuSE before, and I really like it, and of course this way I can learn more about troubleshooting a Linux installation on different environment
I'm wondering where the services order is read from during boot. For some reason the system trys to mount my NFS files BEFORE it starts networking. This results in log delays during the boot process.
I turn back to openSUSE and install it in my machine (win7 installed first),but i can't boot from win7. openSUSE doesn't boot from win7 (like ubuntu) and i can't see ntfs win7 partition from openSUSE. Why openSUSE is so complicated about dual booting
I am relatively new at Linux and am having some problems with an install of openSUSE 11.2. I installed 11.2 on my Thinkpad X31 dual boot with WinXP. It seems to work very well except the network. I looked up swerdna's instructions on setting network cards up. I used YaST to try and set the system up as described in swerdna's instructions. Everything looks fine my network card and wireless card show up in the overview settings screen and everything sets up fine. But when I exit YaST the network doest show up no icon in the system tray and it doesn't even try to connect.
I did go into hardware to see if it was identifying my hardware and my network card shows up as "Thinkpad R40" and the wireless shows up as Cisco Aironet Wireless 802.11b. As far as I know this is correct. I have tried three other distro's and this one has gotten the closest to working so far.
