Ubuntu Installation :: How To Load Kickstart Config File - Refuses To Load File / Launches Generic Install

May 6, 2010

I created an Ubuntu 10.4 iso with the kickstart cfg on it, trying to boot it with the ks=/cdrom/pathtoconfig (tried even ks=cdrom:/path) parameter in VirtualBox but it refuses to load the file and just launches the generic install.

View 1 Replies


General :: Unable To Load A Kickstart File

Nov 8, 2010

I m facing a problem from few days i try to sort it out but i fail to overcome from this problem .

i configure a pxe boot server and mount the RHEL iso to /bootins/tree directory

Then after i created a /kick/client.cfg kickstart file. and share both the directory /bootins/tree and /kick with nfs

below is the entry of my /etc/exports directory


my client machine can successfully boot from the server but after booting an error msg is come, the msg is unable to load a kickstart file , i dont know why this happens coz i can successfully mount both the above share from another linux machine but dont know why at booting time this msg is appears firewall is off

View 1 Replies View Related

Ubuntu Installation :: Boot Error "modprobe: FATAL Could Not Load /lib/modules 2.6.35-22 Generic Modules No Such File Or Directory"

Apr 14, 2011

Tonight I installed ubuntu 10.10 (32 bit) on an external usb harddrive with a dvd I burned and I used my older desktop. I disconnected all internal and external drives first so everything had to be put on the usb drive I selected (only option available). I used the option to load extra software, use the entire hard drive, and let the software do it's thing. I basically had no options where to put things and it didn't have much choice.

When I boot the usb drive on my laptop (win 7 64 bit) by telling the bios to boot to it first... I get an error: modprobe: FATAL Could not load /lib/modules 2.6.35-22 generic modules No such file or directory. This message appears twice and then it does boot into ubuntu and seems to work fine. I'm new to this OS so that is an uneducated guess but the things I have done seem to be working. So exactly what is this error referring too? Is there a way to fix the problem or do I just ignore it.

View 9 Replies View Related

CentOS 5 :: Fontconfig Error: Cannot Load Default Config File

Nov 18, 2009

I am getting a strange font problem (see attached screenshot) for a user logging in over VNC Server, I am also logged in over VNC however I am no experiancing any problems... This was the case on CentOS 5.3 and on 5.4. I have tried removing the .vnc dir in the users home dir and re running vncserver so that it recreates it, I found this in the logs:

1. (nautilus:14718): Pango-WARNING **: No builtin or dynamically
2.loaded modules were found. Pango will not work correctly.
3.This probably means there was an error in the creation of:
5. You should create this file by running pango-querymodules.
6.Fontconfig error: Cannot load default config file


View 2 Replies View Related

Ubuntu :: Restore Default Panel - Message Appeared On Boot Up Saying A Config File Was Missing Or Couldn't Load

Sep 1, 2011

I recently lost the default panel from the top task bar, a message appeared on boot up saying a config file was missing or couldn't load - or something to that effect. I didn't realise to what it was referring until the computer (an Acer One) completed its start up and I could see the desktop

How can I restore the panel? (graphic from my other Ubuntu laptop attached showing the default panel appearance)

View 5 Replies View Related

Slackware :: Setting Up Initrd - Generic Kernel In Grub2 - Can't Load Generic

Jan 4, 2011

I am trying to figure out how to load the generic kernel in Grub2.

I have run the /usr/hare/mkinitrd/mkinitrd_command_generator.sh and ran the output:


Why this will not load.

View 10 Replies View Related

Ubuntu Installation :: Would Not Load After Install / Will Load Via Live Cd

Feb 26, 2010

I'm trying to install Ubuntu (9.10) on my sisters computer. I have installed ubuntu 9.10, but when I try to boot it from hard drive, it would stop loading a bit after the logo appears. The screen would turn off while the system is still running. Live version of Ubuntu works after reports of errors. I tried to search for the problem all over the forum, and could not find a good lead to figure out the problem.

So far to figure out the problem, I verified if cd is corrupted. No issues there. Googled the problem, and seems like other users were able to install 7.04 (old posts).
Its so weird though that live version works and the installed version does not.

Here are my specs:

I can post logs, but I'm not sure which one is useful as I'm relatively new to this process.

View 3 Replies View Related

Server :: Use The System-config-kickstart To Generate A Ks.cfg File?

Feb 1, 2010

I'm using RHEL 5.4 and trying to use the system-config-kickstart to generate a ks.cfg file with all the settings already appeneded. After running the "system-config-kickstart --generate ks.cfg" command, the file gets created but it's missing the firewall configuration, partition information and so on.

How can these settings also be generated with the system-config-kickstart?

View 1 Replies View Related

OpenSUSE Install :: Cannot Load File Linux-atm-lib-2.5.0-142.1

Jul 19, 2011

My problems connecting to DSL are caused by not having the linux-atm-lib file.
After downloading the file and trying to run it, the error message is: Could not find RPM package in pool.

Where is the RPM package?

This is a new install. So far everything seems to work except DSL connection.

View 4 Replies View Related

Ubuntu Installation :: Cannot Find Boot File / Won't Load Anything

Aug 21, 2010

My internal hard drive developed a problem (probably from a fall) and needs to be replaced. In the meantime I've decided to use my external hard drive to hold a version of Linux (ubuntu 10.04) until I am able to replace the internal hard drive. For some reason I am unable to get the external drive to accept the recovery disks I have for Windows 7.

What I'm having issues with is that after installing the Ubuntu OS on to the external, I reboot the PC and it tells me it cannot find a boot file, and won't load anything. I have to run the live cd version of the OS to get anything to work right.

View 9 Replies View Related

Ubuntu :: GDM Broken - Gdm-binary[230]: WARNING: Unable To Load File '/etc/gdm/custom.conf'. No Such File Or Directory

Sep 1, 2011

I've had Ubuntu 11.04 installed on my desktop since it's release. Up until an hour ago, it was working fine. I clicked on an update from the update manager, now booting into a graphical mode is completely broken, (the start-up load hangs at 'Check Battery State ... [0k]'). I restarted my computer, and booted into safe mode, and launched the terminal. This all works fine. I then typed :

Code: sudo gdm start into the command prompt, hoping that I would be able to start things manually. Instead, it spat out this: Code:

gdm-binary[230]: WARNING: Unable to load file '/etc/gdm/custom.conf'. No such file or directory.
gdm-binary[230]: WARNING: Unable to find users : no seat-id found.
gdm-binary[230]: WARNING: Gdm Display: display lasted 0.070467 seconds

The last line was printed about 8 times, with slightly different times, before it gave up and failed. Some information which might help, I have Gnome 2, Unity and KDE (not sure which version), installed. My graphics card is the GTX 275, and I have driver the Nvidia driver 275.21. So yeah, I think the update has gone and moved custom.conf somewhere, but I have no idea on how to fix it. I have a graphics programming assignment due on Friday and I would be eternally grateful if I could get this fixed well before then.

View 2 Replies View Related

OpenSUSE Install :: WARNING - Cannot Load Translation File Locale/en/rpmorphan_trans.pl

Mar 13, 2011

when i try to execute rpmorphan i receive this error, WARNING can not load translation file locale/en/rpmorphan_trans.pl

View 6 Replies View Related

Red Hat :: How To Load Driver In Kickstart

Jan 14, 2011

I'm trying to load RHEL4 (I know, I know, but I can't get around that) on a Panasonic Toughbook CF-31 using a kickstart file. I start the install using 'linux acpi=off ks=cdrom:/ks.cfg' (I use acpi=off otherwise it hangs at some ACPI embedded controller message). It does not recognize my CD-ROM drive, though, and asks me to choose the driver or point to a driver disk. I've selected 'Advanced Host Controller Interface SATA (ahci)' and it is able to continue on. It forgets that it was supposed to run off of the kickstart, though, and goes into the default graphical install. My question is...how do I add a line into the kickstart to choose this driver?

View 3 Replies View Related

Ubuntu :: Refuses To Load After Physical Damage?

Dec 28, 2010

I was in Ubuntu when I dropped my laptop, which resulted in a cracked screen. I loaded Windows (Vista), and found it and the files to be unharmed. On my attempt to load Ubuntu, it takes me to a GRUB screen, where it gives me a default message about GRUB. If I try the command "exit" it replies "No bootable device -- insert boot disk and press any key. It's installed on the same hard drive as Windows (dual boot setup), and Windows works fine. I do have files I would like to get off of Ubuntu (if it is unrecoverable),

View 7 Replies View Related

Fedora :: X Refuses To Load After Update On 12

Mar 13, 2010

I installed my updates this morning, except for the nss packages which refused to work. So I just installed the other packages and left the nss package. When I rebooted my computer X would not load. I managed to track down an error by typing "startx" from the command line:


symbol lookup error: /usr/lib/libXi.so.6: undefined symbol: XESetWireToEventCookie

All I did was update my computer and have not done anything else to the system. Also, I found this: [URL] And I can not but notice that the version of libX11 available from yum is not 1.3.3. Could there have been a packaging error with the updates?

View 4 Replies View Related

Ubuntu :: "Can't Load Image From File '/usr/share/firefox/icons/mozicon128.png': File Does Not Exist."

Apr 12, 2010

Tried running simdock from software center...uninstalled because I was getting this error after trying to run ap "Can't load image from file '/usr/share/firefox/icons/mozicon128.png': file does not exist."

View 3 Replies View Related

Fedora Installation :: GRUB Doesn't Load - Make Load Again Upon Booting?

Feb 9, 2009

I had Fedora 7 and Windows Vista dual booting on my computer. I just installed Fedora 10. When the live CD asked me where to install it, I chose "Remove all Linux Partitions and create default layout" The installation went perfectly, but now when reboot my computer, it boots directly into Fedora; GRUB does not load to ask me which OS I want to load. I know I did not overwrite Vista because I can still view my Vista files through Fedora. Here is my grub.conf file:


What do I need to do to make GRUB load again upon booting?

View 2 Replies View Related

Fedora Installation :: Whenever Load The Url Http://localhost In Mozilla It Shows A Page Load Error?

Aug 8, 2010

I have found that APACHE or 'httpd' is installed in my machine. But the problem is I can start or stop the httpd but whenever I load the url http://localhost in Mozilla it shows a page load error.I have done this ,

$ /etc/init.d/httpd start
then this
$ /etc/init.d/httpd graceful


View 3 Replies View Related

Ubuntu :: How To Load .isz File

Aug 20, 2010

As we known, .isz file is compressed by UltraISO.

how to load it under ubuntu?

Are there any applications for it?

View 2 Replies View Related

Ubuntu Networking :: Broadcom WLAN - Connection Refuses To Load Anything Off The Internet / Local Network

Jun 6, 2010

I dual boot windows xp and ubuntu 10.04 LTS and the wireless card works perfectly fine in xp so I know its not a hardware/network issue. In ubuntu, it detects wireless networks, will connect to network and work for about 20 seconds.


and it continues on after this alternating between a normal 20ms and high ping over 200ms. The connection refuses to load anything off the internet/local network.

View 5 Replies View Related

Slackware :: Gxine Says There Is No File To Load?

May 8, 2011

Just curious if anybody can watch this site with slackware/gxine or other program? [URL]

gxine says there is no file to load.

I'm using slackware 13.1 and xfce.

View 6 Replies View Related

General :: Re-use An Anacanda.ks File To Load Another Server?

Jun 11, 2010

I just loaded one server, and want to load another server in the same exact way, just with a different name and IP. Can I somehow use the anacanda.ks from the old server if i change the IP and name in that file?

View 4 Replies View Related

Ubuntu :: CPU Load (File Transfer) Shows Mirror Image

Feb 4, 2010

I was just wondering why my Dual-core Processor shows basically a mirror image where CPU core loads cross. On something like a file transfer, shouldn't they both be at the same level?

View 1 Replies View Related

Ubuntu :: Error - Fontmatrix Has Been Unable To Load The Font In File

Jul 17, 2010

I've installed Fontmatrix. It deactivates fonts correctly, but when I try to reactivate them, it does not do so, and gives this error message: "Fontmatrix has been unable to load the font in file /usr/share/fonts/truetype/ttf-liberation/LiberationMono-Bold.ttf. Please check missing files." It is still possible to reinstall them using Gnome Font Viewer. Does anyone know what to do about this?

View 5 Replies View Related

Ubuntu :: Grub2 Errors: Can't Read File And Need To Load Kernel First?

May 19, 2011

I've got a Lucid system (normal Ubuntu, not any of the derivative distros) which has been throwing up the following error message this morning when trying to boot:

error: couldn't read file.
error: you need to load the kernel first.


View 9 Replies View Related

Ubuntu Servers :: Auditing File Access - Best Tool To Load

Jun 6, 2011

Running Ubuntu Server 10.4

I'm in need of some auditing to determine what is happening with some files on our local server. What is generally the best tool to load, and do you have any good links to a tutorial on how to install, setup and run?

I'm looking for what users have accessed a file. ... read, open, edit, delete, move, save... etc..

View 4 Replies View Related

General :: File System Loads / Load The Partition?

Aug 27, 2010

my data resides in a partition sda2 - in a logical volume lv_root.unless I'm wrong lv_root contains the information on how to load the partition.so superficially it seems the partition must be loaded bofore we get the info on how to load it.

View 20 Replies View Related

Software :: Cannot Load VLC Media Player - File Not Compatible

Feb 10, 2010

I have tried to download vlc media player but the file type is a .exe file which is a windows file, and that wont run or even open on the linux system. How to find a compatable vlc for linux!

View 3 Replies View Related

Ubuntu :: Ntfs-config Fails To Load?

Jan 17, 2011

wandering what this means when i try to run ntfs-config?Quote:

Traceback (most recent call last):
File "/usr/bin/ntfs-config", line 102, in <module>
main(args, opts)


View 1 Replies View Related

Ubuntu Security :: AppArmor Failed To Load - Could Not Allocate Temporary File

Jan 7, 2010

I get the error message in the subject line, followed by a red failed message.

However, once the system is finished booting, I can log in and

sudo /etc/init.d/apparmor start
and it starts normally.

View 7 Replies View Related

Copyrights 2005-15 www.BigResource.com, All rights reserved