I haven't used linux for a long time, after this break i wanted to install ubuntu and give it a shot but altough that i have a 10gb free space and another seperate 2gb free space for a possible linux setup, installer can't seem to recognize them.
View 1 Replies
will it be possible to convert existing filesystem to new ext4 while upgrading from Fedora 10?
View 1 Replies View RelatedI'm trying to set up a dual boot of Ubuntu & Windows XP.I have two hard disks installed - sda is 80GB and has an existing Windows setup on it, sdb is my 160GB data storage disk.When I have installed Ubuntu on other machines, it has detected any exisiting OS's and offered to install Ubuntu alongside them.
However, this time Windows doesn't seem to be detected - it says 'no other operating systems found' and wants to install to my second (i.e. sdb) disk. I was intending for Ubuntu & Windows to sit side-by-side on the first hard disk.Although I've installed Ubuntu before, I'm a bit of a novice and I'm not sure how to achieve this - where am I going wrong?
I have an issue with Gparted v0.19.0 (Jessie) which has replaced v0.12.1 (Wheezy) which works fine. I had hoped to ask this question in Gparted's own forum, but after three weeks and multiple attempts no-one has approved my account there.
Unfortunately, my existing partition structure (on two different laptops) seems to be invisible to the new version of Gparted. Since parted seems to be used by the Debian installer, the Jessie installer cannot install on these machines without repartitioning the entire disk. That means that on such machines, the only option is to wipe everything or install Wheezy, then edit sources.list to upgrade to Jessie.
Both Gparted v0.19.0 and the Jessie installer report the entire hard disk as a single Fat16 partition,The same partitions which are invisible to Gparted appear as normal in the Places sidebar, of either Thunar or the PCManFM file manager. They can be mounted and used, seemingly without issue (I have experienced the same problem under Ubuntu/Lubuntu 15.10). Below, is the shell output of fdisk, which can see the partition structure and parted, which cannot:
Code: Select all$ sudo fdisk -lu
Disk /dev/sda: 74.5 GiB, 80026361856 bytes, 156301488 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
[code]...
I have recently installed Fedora 10 in my x86_64 system and fully updated. The updation size was nearly 650MB. My question is can I make a an updated installer DVD from my existing fedora system?
View 8 Replies View RelatedI have been upgrading from 9.04 to 10.04. Now, I want to install 10.10 from the beginning without losing the data in my current partitions but when I run the Maverick installer it recognize my disk as a whole with no partitions. From another posts, I suspect that the problem is in the partition list because it seems to be a duplicate partition but don't know how to fix it. This is the fdisk output:
Code:
jgarcia@jgarcia-laptop:~$ sudo fdisk -lu /dev/sda
Disco /dev/sda: 250.1 GB, 250059350016 bytes
255 cabezas, 63 sectores/pista, 30401 cilindros, 488397168 sectores en total
Unidades = sectores de 1 * 512 = 512 bytes
[Code]....
I am currently installing 11.2 on a new 1TB hdd.the opensuse installer does not allow me to create a / partition (ext4) >20GB. Does anyone know why and how I can get around this limitation?
View 9 Replies View RelatedCurrently, I have a dual boot set up with Ubuntu and PCLinuxOS. I have a separate / and /home partition for both (ext4). When I run the installer, it claims the whole disc is empty. I tried the expert option and loaded every module that seemed to have to do with partitioning, but that made no change. Is there some simple option I am missing that might help it recognize that there are existing partitions? This was the "testing" installer if that makes any difference.
View 3 Replies View RelatedI was wondering if it's somehow possible to install the Live USB to an ext4 partition, this because I have a 4gb filesize limit on fat32 and that means I cannot make the casper-rw any larger. And next to that I can decently manage permissions on that.
View 9 Replies View RelatedIs it possible to create a Live CD install of my existing Ubuntu installation? I mean, to create a Live installation CD of my system as it is now on my pc, with all the programs and utilities that I have installed, so that if the system crashes and is unbootable, I could be able to restore it to the state when I created the Live CD.
View 2 Replies View RelatedAfter spending almost 100 hours trying to get my MP3 player working I have decided to add an XP partition and use it there.I am an Ubuntu newbie and am finding the whole "new-dos" experience too frustrating for words.Can someone please explain in ENGLISH for an IDIOT how I can do this.
View 9 Replies View RelatedI have a machine dual-booting with a Windows and an Ubuntu installation on it. I want to reinstall Ubuntu on top of the existing Ubuntu installation on this machine so that I have a fresh install of Ubuntu.I don't mind losing all my data on my Ubuntu partition, but I need to keep all the data currently available on my Windows partition.
View 1 Replies View RelatedWhat happens if I install the DVD version of Fedora 15 over an existing installation of Fedora 15-KDE? Will it cleanly add any software I don't already have, or will it change or disrupt my installation?
View 5 Replies View RelatedThinking of a re-install to remove LV and use Ext4 only. [Root is too large] Can I back up Home from the LV and move it to an external drive. If so will I be able to reinstall and Custom partition so I can use Ext4 and then copy the Home files back to my new Home partition. I have only a small knowledge of LV systems so just want to be carefull.
View 1 Replies View Relatedthis my second thread and i need to know why both alternate and graphical installers freeze when install starts and is it becuase of my DvD Drive and what do i need to do.Also is it possible to create a new partition on my hd and then install linux from their and then log on and delete windows partition.
View 1 Replies View RelatedI backed up all my Wubi-files + the boot.ini etc. I reinstalled my Windows OS, then put my Wubi-files on a new partition D: . Put the wubildr.mdr file + wubildr in the C: dir. Changed the boot.ini to C:wubildr.mdr = "Ubuntu" . But when I select Ubuntu in the boot manager I get an error message (Couldn't load Windows, ntoskrnl corrupt - or something).What do I do wrong? Can't I just install a new Wubi using the installer and then replace the disk-file by the old one?
View 2 Replies View RelatedI have a question about ext4,remastersys backup : I have upgraded from 9.04 to 9.10 via the upgrade button in synaptics, so it means that the files system was not touched, which means that my system is still ext3 as it was when I installed the 9.04. I can make a backup of my system as it is configured right now (that's how i like it) using remastersys.
Can I install my system backup into my machine after formating it into ext4 or when I create a backup using remastersys it must stay in the files system as it was when it was backed up? The issue is that right now the 9.10 responds from some reason a little bit slower than my 9.04 responded (to everything e.g. open/close windows etc...) and I read in the forum that ext4 makes 9.10 run faster.
I have tried 4 times now to install but it keeps freezing. I wiped my hdd with a tool from UBCD and im starting fresh with a full install of Ubuntu 10.10.I'm installing from a LiveCD. Should I format the hdd in some way before install?
View 5 Replies View RelatedI have Ubuntu 11.04 installed and running on my laptop and was wondering if there was any way to create an install disc/usb or some other way to install Ubuntu in its current state (including all apps, updates, settings etc.) onto my desktop.
View 6 Replies View RelatedI booted into the Fedora 11 on my netbook, and used the desktop icon to install to hard-drive. I specified to use "Free space", and hit next. From there, it just stalls. The "Install Fedora" window does nothing, and I'm going on a half-hour now of nothing.
Tried three times, still nothing.
The first time I tried, I chose to replacce old linux installation (ubuntu), and when I told it to install Fedora 11 root as ext4, it said the boot can't be ext4... so I chose ext3 and it said root device must be ext4...
System: Lenovo R61i, that had Ubunta installed, removed and Vista Home Pre. installed. Plenty of hardware power. Want to install a Knoppix 6.0.1 from an existing CD I have. I want to be able to run both systems on the laptop (dual boot)? I have partitioned the hard drive using vista, so there is now a partition that I believe is Lenovo rescue, the main large C space, and the new partition about 6.4 gb that vista shrank out that is not assigned. When I try to install the Knoppix it just keeps loading in and ends up running live off the CD without installing to the hard drive.
I have stopped the loading sequence in different places, but don't know what to enter or where. I also wanted to install it onto my 64 gb flash drive that has nothing installed but comes up showing that it is fat 32. I have tried to install to the flash drive from the live running Knoppix under install to usb drive, it finds the drive, I select it, and the next window says there is no such file. So, that's my story and I'm stickin to it. All I want to do is get this system onto the laptop or flash so I don't ever have to deal with Microsoft Windows again!
HDD with four partitions: Three DOS bootable primary partitions are located in the head, and the residual extended partition is divided into several logical drives.
1st trial: 10.04 installer recognized the last largest logical drive for system installation, but installer truncated the extended partition, and created the "terrible" 5th primary partition at the end of the HDD. GParted and other utilities cannot access to this 5th primary partition. (So, I restored the lost partition table on the HDD manually by MBM. But several OS were broken.)
2nd trial: To avoid making this "terrible" 5th primary partition, I located the largest logical drive for installation at not of the end.10.04 installer recognized this logical drive, but failed again.I tried GParted. but also failed to formating to ext4.Maybe, 10.04 installer failed at this formating step. Logical drives are not supported in 10.04 ?
I have a dual boot config with
sda1 /boot
sda2 Win7
sda3 /
sda4 Truecrypt Partition
i have grub1 working and chaonloading truecrypt loader if i choose "win7" in grub1 menu I want to install a new kubuntu (no upgrade) I have read that that there are problems with grub2 and truecrypt actually a bug that grub2 dont chainloads truecrypt boot loader many ppl seem to have problems with grub2 then i read somewhere that ubuntu install is not asking for grub2 to be installed and just installing it. is this right?
i think at least for the alternative install cd its wrong. i installed it on another pc and it asked me! it works for win7 and Ubuntu and i guess its grub2 but there is no truecrypt installed anyway, i wanted to ask is the live cd installer asks me for grub2 and what is the best and easiest way to stay with my grub and just change the menu.lst to the new kernel (i guess there will be one)
I have installed grub.efi in the ESP partition which is able to load ubuntu 9.04.I think it works with fedora 11 x64 as well. And I tried to install fedora in the partition which was used to install ubuntu. But the installer keep telling me that ext4 partitions are not bootable. But I don't need to install a boot loader on that partition
View 4 Replies View RelatedI have a laptop which has Xubuntu on a Wubi install. I have no way to connect my laptop to the internet, as I have dial-up on my desktop and my laptop doesn't have a dial-up modem. I need to install "libc6" as a dependency for libc6-dev, but when I double click the .deb (which I transferred using an sd card using my desktop, which has Vista) It shows the window for a couple seconds, and then closes. I already have libc6 installed, but it is an older version.
View 2 Replies View Relatedi try to boot off the cd, it loads vmlinz and init.rd, anaconda starts loading.it mounts the temp filesystem and freezes. i can't choose how to install or anything. nothing comes up graphically.
View 2 Replies View RelatedI live in a country where 1Mbit broadband is a premium service for large businesses. I am paying a little over $40 a month for a 128k connection with monthly capping. I want to download Fedora but the download is just huge for my connection, especially as it is used for work 14 hours a day. I have attempted the LiveCD and got the 'ext4 cannot be used for boot' error. I also have several other specialised distros on this machine and it's going to be a pain inserting a new boot partition just for Fedora.
Like it is possible with Slackware, can I just download the first CD of the Fedora 11 set and get a minimal install from this or does Fedora need the whole set of disks? Is there a simple enough net install option that I could use instead? I can't understand why they can't just release something like Ubuntu's alternate install CD.
I am not sure this is the right forum, its more about partitions, but it is a bit like it. This is the problem; I have a problem concerning my partitions; I run Opensuse 11.3 KDE 4.4.4 (standard issue) 64 bit.When I installed suse I had only attached one harddisk. A 1.5 Tbhardisk. In that I had made a 50 Gb partition and installed Windows. I tried out linux mint, just for the fun, and thenI installed Opensuse, let it erase mint and gave it another 50 Gb In that it made home etc. The rest Suse also formatted in ext4. Somehow it didn't get a mount point.I then attached second and third harddrive, and gave them mount points Windows/E and F respectively. (They are formatted in ntfs-3g)Yesterday I decided to give it a mountpoint, and gave it /windows/DI changed my mind and changed it to /home2In both these places I could access it but only as read only. And most weird of all, it had a lot of files in them, very much looking like root.
My questions are; How can I access and use that partition?What might these files be? Can I delete them? How would I best mount them? This is a picture of yast expert partitionerImageBam - Fast, Free Image Hosting and Photo Sharing
I've had such good luck with Fedora (and this Forum), I'm attempting to put F12 on wife's brand new Sony Vaio, a VPCEB11FM, a 64bit system. I downloaded the Fedora-12-x86_64-netinst.iso, made sure it was ok with sha256.exe, then burned the image to DVD. Booted it up and let it default to "install or upgrade an existing system". It dead-ended in a dark blue or black screen. I re-started and examined the other options. Thought I'd try the one that says: "Install system with basic video driver". Got all the way through to where it got ready to start downloading files. Can't get past that point because it attempts to get to the Internet using the Sony's wireless card! Why would it try the wireless when there's a wired NIC card in this PC that requires no special driver etc. How to proceed from here?
View 3 Replies View RelatedHaving read several threads and received excellent previous advice there are just a couple of points I want to check please before proceeding on laptop. I want to upgrade to 11.4 from 11.2. My disk setup is as follows:-
Disk /dev/sda: 120.0 GB, 120034123776 bytes
240 heads, 63 sectors/track, 15505 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Disk identifier: 0x462d462c
[Code]..
If I select existing /home root and swap partitions, format root but prevent formatting of /home and use a different user ID I believe that will leave my existing data intact and will allow me to trial new os. Is this correct approach? If all goes well and when I have new system working correctly, what is best way make old user id date accessible. Can I simply create my old id on new system and will that allow me to access data when I log on with that id?
Second question; at present I have the ability to boot to openSUSE, OS/2 and windoze. (It used to be done entirely by Boot Manager but during my last Linux installation I messed this up a bit so now machine boots to grub and this offers all three operating systems but chain loads Boot Manager if I select OS/2)
When I do the new installation what should I select to retain this setup so that I still have access to windoze and OS/2 but when selecting linux have new 11.4 system run.
