General :: Knoppix 6.0.1 Installation With Existing Vista Install?
Dec 6, 2009
System: Lenovo R61i, that had Ubunta installed, removed and Vista Home Pre. installed. Plenty of hardware power. Want to install a Knoppix 6.0.1 from an existing CD I have. I want to be able to run both systems on the laptop (dual boot)? I have partitioned the hard drive using vista, so there is now a partition that I believe is Lenovo rescue, the main large C space, and the new partition about 6.4 gb that vista shrank out that is not assigned. When I try to install the Knoppix it just keeps loading in and ends up running live off the CD without installing to the hard drive.
I have stopped the loading sequence in different places, but don't know what to enter or where. I also wanted to install it onto my 64 gb flash drive that has nothing installed but comes up showing that it is fat 32. I have tried to install to the flash drive from the live running Knoppix under install to usb drive, it finds the drive, I select it, and the next window says there is no such file. So, that's my story and I'm stickin to it. All I want to do is get this system onto the laptop or flash so I don't ever have to deal with Microsoft Windows again!
I am new to knoppix. I actually have never used it. I was under the impression that I could change or recover my password on Windows Vista. I only have one user and it is the administrator. I am not exactly sure why it is no longer working. It is on a laptop and I have let others use it at times. don't know if someone may have changed when it was open at work or something. Every time I boot up and my user account comes up. I put in my password and it looks like it will log on but then comes back and says wrong password. I did see a way to do it with Windows 2000, and XP. Will that also work with Vista?
Right so my situation is a little obscure and from all the posts I've read through I can't find one that suits me well enough.My PC's hard drive recently went on the fritz so I backed up all my data, got a brand new Terrabyte hard drive and then put all my stuff on there. I also plugged in the fault drive as a secondary and ahev cleared most of the stuff off it. It's separated into two partitions; E: and F: but together make about 600 gigs. I then have two external Terrabyte hard drives, it's a long story but their connected via USB.
Now I really like the idea fo getting to grips with Linux. I don't want to use a LIVE CD, I've done that already and I want to see how I get along using it as a proper OS. I also really need to keep the Windows Vista for several reasons, most importantly for iTunes which I use to keep my iPhone and iPad up to date and I've heard iTunes and linux don't get along too well, even with programs like WINE. So obviously I'm looking to dual boot and keep all my data but what would be the best way to go about it? Stick it on my primary drive? Or on my slightly faulty drive? Or on one of my two externals? On the bright side, because I'm on a fairly new hard drive, my Vista runs really smoothly, and so I shouldn't encounter too many bugs that windows is renowned for a long the way...
I'd also like to be able to access all my data from both OSs so I don't have to keep jumping from one OS to another. Is that possible? or simple to accomplish?I have a pretty good Nvidia graphics card too, so I'd appreciate it if someone could explain how I get XGl working on Fedora once it's all set up.
I have installed Knoppix 6.1 on a memory stick and run it on my laptop. Everything works well, Internet, e-mail and so on. I have a DVD with Linux program on and I been trying to install them but no success. (No .exe files here). It appears the program on the DVD comes in different formats ( different file extensions). Can someone tell me how to install programs on Knoppix 6.1
On my ms windows machine, the OS went out of order, and I wanted to salvage all my pictures, and decided to use a live CD and move some of my media files to my mp3 player... its storage is 8 gigabytes I tried a latest Knoppix first, it did not provide me a nice GUI. Instead, it provide me with a humble looking, less than friendly, menu-based interface which I gave up on in about 3 minutes. I was thinking for a minute, and when I tried to install Ubuntu in the past, one of the options I was provided when I ran the Ubuntu installation CD was "Try Ubuntu without installing it" and I thought it meant the Ubuntu installation CD could also be used a live CD. And I put together an Ubuntu CD and attempted to use it as a live CD! ah man it was beautiful. It even recognized the video card on my machine. I am never going back to knoppix. From now on, when someone ever mentions Knoppix to me, my response will be, "what is Knoppix?"
I have had some help with root password su and sudo su, but I can not find the correct password to install or remove programs. I keep getting the same message ' Authenticate' Authentication is required to install software packages. An application is attempting to perform an action that requires privileges.Authentication is required to perform this action.Then it asks for a password, I've tried enter, seacats, knoppix, user, and my root password. None of these work I seem to be a second user and not the owner.
My Linux language is very low, but I am learning, right now in order to find or try to install software I go through the startup menu> preferences> software center. Is there another way to find and install software that doesn't require and authentication password? If so where do I find out the steps to do this? Hands on is always the best teacher.
I have CentOS 5.3 dual booting with Vista on a machine with AMD-V support. I'm looking to get my existing Vista partition running as a DomU Xen machine. Can this be done without having a dedicated video card?I've got a Xen kernel (from the repositories) installed and running perfectly with my nVidia graphics card. I tried to set up a new DomU through virt-manager and set it up as Vista, pointed it at the physical partition (fakeRAID mapper device) and gave it 2Gb RAM (I have 8Gb total). I got it to do a PXE network boot, knowing that this would fail and therefore no installation would be attempted, as no installation is needed.
This worked well in that the initial PXE boot failed and the machine shut down. When I start it now it seems to actually boot Vista, but I just can't see it! It goes as far as saying "Booting from Hard Disk..." in the viewer window and then doesn't update, although the disk activity and CPU usage are very similar to a machine booting Vista to the login prompt.
Every time I try to run another script from my knoppix.sh file, it pops up and says permission denied. I've also tried running the scripts manually after stopping the knoppix.sh script yet it still gives the same error.
What happens if I install the DVD version of Fedora 15 over an existing installation of Fedora 15-KDE? Will it cleanly add any software I don't already have, or will it change or disrupt my installation?
I haven't used linux for a long time, after this break i wanted to install ubuntu and give it a shot but altough that i have a 10gb free space and another seperate 2gb free space for a possible linux setup, installer can't seem to recognize them.
Is it possible to create a Live CD install of my existing Ubuntu installation? I mean, to create a Live installation CD of my system as it is now on my pc, with all the programs and utilities that I have installed, so that if the system crashes and is unbootable, I could be able to restore it to the state when I created the Live CD.
After spending almost 100 hours trying to get my MP3 player working I have decided to add an XP partition and use it there.I am an Ubuntu newbie and am finding the whole "new-dos" experience too frustrating for words.Can someone please explain in ENGLISH for an IDIOT how I can do this.
I have a machine dual-booting with a Windows and an Ubuntu installation on it. I want to reinstall Ubuntu on top of the existing Ubuntu installation on this machine so that I have a fresh install of Ubuntu.I don't mind losing all my data on my Ubuntu partition, but I need to keep all the data currently available on my Windows partition.
i have recently started my masters degree program and i have to install fedora 11 for one of my courses. The problem is when i try to install fedora 11 on my laptop, it wipes out my windows vista installation. I want to keep vista. I have a sony vaio laptop model VGN-FW340D. 4GB RAM and 400 GB HD. i first shrink my hard drive to free up around 100 GB. Then i run fedora 11 DVD and let it make the partitions on my free space.. I have tried everything.. I chose use free space the first time, but i didnt work, it wiped out my vista, next time i chose custom layout and defined boot, root and swap partitions , but again it wiped out my vista.. I have read many guides to dual boot vista and fedora and have carried them out step by step, but nothing works.... Also i dont have vista installation DVD, i just have the recovery CDs, so everytime it wipes out my vista, i have to do system recovery, ive been trying for a week now, and its driving me crazy, i asked a friend of mine to help me out, he has dual boot system, and he tried it and it did the same thing, wiped out my vista... i just have one drive C: with two partitions, one small partitions which contains recovery files, and the rest of the partition has vista.......
I have a single hard-drive on a spare computer and I decided to try out Ubuntu on recommendation from a friend. I really like it now but at first I just dual-booted it, and now I want Vista gone. I know it's unnecessary to have just one OS but my hard-drive isn't particularly big and I'd prefer to have Ubuntu by itself. Can anyone tell me how to eliminate vista and leave Ubuntu as my sole operating system (I've all my files from computer on another computer so I don't have to worry about losing anything).
I've had such good luck with Fedora (and this Forum), I'm attempting to put F12 on wife's brand new Sony Vaio, a VPCEB11FM, a 64bit system. I downloaded the Fedora-12-x86_64-netinst.iso, made sure it was ok with sha256.exe, then burned the image to DVD. Booted it up and let it default to "install or upgrade an existing system". It dead-ended in a dark blue or black screen. I re-started and examined the other options. Thought I'd try the one that says: "Install system with basic video driver". Got all the way through to where it got ready to start downloading files. Can't get past that point because it attempts to get to the Internet using the Sony's wireless card! Why would it try the wireless when there's a wired NIC card in this PC that requires no special driver etc. How to proceed from here?
Having read several threads and received excellent previous advice there are just a couple of points I want to check please before proceeding on laptop. I want to upgrade to 11.4 from 11.2. My disk setup is as follows:-
Disk /dev/sda: 120.0 GB, 120034123776 bytes 240 heads, 63 sectors/track, 15505 cylinders Units = cylinders of 15120 * 512 = 7741440 bytes Disk identifier: 0x462d462c
[Code]..
If I select existing /home root and swap partitions, format root but prevent formatting of /home and use a different user ID I believe that will leave my existing data intact and will allow me to trial new os. Is this correct approach? If all goes well and when I have new system working correctly, what is best way make old user id date accessible. Can I simply create my old id on new system and will that allow me to access data when I log on with that id?
Second question; at present I have the ability to boot to openSUSE, OS/2 and windoze. (It used to be done entirely by Boot Manager but during my last Linux installation I messed this up a bit so now machine boots to grub and this offers all three operating systems but chain loads Boot Manager if I select OS/2)
When I do the new installation what should I select to retain this setup so that I still have access to windoze and OS/2 but when selecting linux have new 11.4 system run.
I have Ubuntu 11.04 installed and running on my laptop and was wondering if there was any way to create an install disc/usb or some other way to install Ubuntu in its current state (including all apps, updates, settings etc.) onto my desktop.
I installed Ubuntu 10.10 on my PC running Vista Home Basic. I installed to run as a dual boot but now I can only boot into Ubuntu. I have tried to run the recovery disk for Vista and it errors out also..
I'm trying to upgrade my Win8/Wheezy 64-bit machine to Jessie 8.1 by installing from the amd64-bit netinstall iso image on a USB flash drive. I had done the previous, Wheezy, install on a disk partition that was whole-partition LUKS/LVM drive, with separate logical partitions for swap, root, and home.
Before doing the upgrade, I booted to the BIOS to ensure that my UEFI system had the correct, CSM and Legacy modes enabled in it, so that installer would boot using the non-efi BIOS mode.
Step one of the upgrade was to boot the netinstall and enter the rescue mode so that I could manually do the cryptsetup/LVM business. When I returned to the installer, I mounted the now-recognized logical partitions normally, choosing to format only the swap and / partitions.
During the entire process, I had to go into rescue mode one more time to manually mount the unencrypted /boot partition, along with my /home partition. I copied a backup of my old /etc/crypttab from the latter, and after returning to the installer, finished the install. That finish included installing grub on my hard drive's main boot partition.
Everything seemed to finish with no problems. However, when I try to boot the debian bootloader, I get tossed to grub rescue with the message that '/grub/x86_64-efi/normal.mod' doesn't exist. At this point I returned to the installer, mounted the /boot partition, and saw that there grub-install didn't create that an x86_64-efi directory at all. Instead, it had created an i386 directory. The exact name escapes me at the moment.
I *think* that my install was clean other than the last bit that was related to installing the bootloader. How to reinstall the bootloader in such a way as to make all of this work.
I've just got another sata HDD and thought lets put in a nice install of Fedora 14 having tried out the live CD over the weekend. Right my system is configured thus
[Code]...
will Fedora 14's install program make an addition to the existing GRUB configuration or will it do something different Yes I have searched.... and looked at the installation documents....
I am planning to install 10.4 when it arrives. And am not going to upgrade because i upgraded from 9.04 to 9.10 so now i need to refresh the system.But I have all my partitions except root using lvm2 logical volumes. My question is : What is the safest procedure to install 10.4 on an existing lvm2 without losing my files/partitions
i have grub1 working and chaonloading truecrypt loader if i choose "win7" in grub1 menu I want to install a new kubuntu (no upgrade) I have read that that there are problems with grub2 and truecrypt actually a bug that grub2 dont chainloads truecrypt boot loader many ppl seem to have problems with grub2 then i read somewhere that ubuntu install is not asking for grub2 to be installed and just installing it. is this right?
i think at least for the alternative install cd its wrong. i installed it on another pc and it asked me! it works for win7 and Ubuntu and i guess its grub2 but there is no truecrypt installed anyway, i wanted to ask is the live cd installer asks me for grub2 and what is the best and easiest way to stay with my grub and just change the menu.lst to the new kernel (i guess there will be one)
trying to install F14 on a computer that has Vista on it. I chose the option for it to shrink my existing partition since it takes up the whole hard drive. On the next screen I choose my install drive... then it asks me (dont remember verbatim) by how much do I want to shrink the current partition? I put 200 (I assume its GB... is it MB?) and then it said shrink failed and then takes me back. Is that question on how much I want to shrink have to do with how much space I'm putting on the new F14 partition or how much I'm leaving on the windows partition?
I have tried many methods but still didn't succeed in rebooting Win Vista (blank page after selecting it in boot menu). The main problems were that GRUB was installed also on Windows partition, and Win partition appears as FAT16 and not NTFS Here is the output of boot_info_script, I would say that everything seems OK.
I installed Ubuntu 10.04/32-bit desktop on a system with a working Vista x64 installation. I had problems installing Ubuntu. I tried wubi, which didn't work at all... just booted right into Vista with no ubuntu boot option. I tried doing a full Ubuntu install, and it never gave me the "install side by side" option. Finally, I shrunk my Vistax64 boot partition to give some room for Ubuntu. Ultimately, I installed Ubuntu 10.04/32-bit desktop. I had to use the "Manully create partitions" option during installation, and created an ext4 root partition and a swap partition. The Ubuntu install worked but now I'm unable to boot into Vista x64.
After the Ubuntu 10.04 / 32-bit desktop install, the Grub2 boot loader came up. It boots into Ubuntu just fine, but when I select Vista I get a very fast blue screen, then it reboots. I tried "last known good" on the vista boot, didn't work I tried a safe mode vista boot, but get the blue screen right after it loads the "crcdisk.sys" file.
i m trying to install ubuntu in windows vista after running the window. a installaton process is started and after that installation ask for REBOOT, when i restart my system and select UBUNTU 10.04 after counting 5 secs, appears a screen of black colour with some commands and stupped here as fix screeen.......what can i doo for installation.????
I have an existing Dell Precision 690 workstation setup to dual boot Windows XP and CentOS 5.5. These operating systems are installed on two separate drives. I have a grub menu on the Linux drive with it set as drive 1 and points to the windows boot info on drive 2.I tried taking the linux drive and installing it in a new HP Z800 workstation to see if I could be lucky enough to get it to boot, but it didn't. Immediately after it starts to boot I get a few errors.Here is what the system shows:Right after this message "Red Hat nash version 5.1.19.6 starting" I get the following lines:
"Unable to access resume device (LABEL=SWAP-sda2) mount: could not find filesystem '/dev/root' setuproot: moving /dev failed: No such file or directory
