Ubuntu Installation :: 10.10 Install Freezes While Creating Ext4 File System?

Nov 1, 2010

I have tried 4 times now to install but it keeps freezing. I wiped my hdd with a tool from UBCD and im starting fresh with a full install of Ubuntu 10.10.I'm installing from a LiveCD. Should I format the hdd in some way before install?

View 5 Replies


ADVERTISEMENT

Ubuntu :: Freezes During Install Of 10.10 / "Creating Ext4 File System For / In Partition #1?

Feb 6, 2011

I downloaded the ISO from the Ubuntu site. I can run it from the CD without any problems however, when I install it, it freezes. I am installing on a 2nd hard drive in my computer. It gets up to the point of "Creating ext4 file system for / in partition #1 of SCSI1 (0,1,0)(sdb)... I've tried deleting the partition and creating one by myself with no prevail. I am going to school for computer networking and my counselor told me that it'd be a good idea to learn the Linux OS for my major.

View 2 Replies View Related

Ubuntu Installation :: LiveCD Crashed On "Try", Install Freezes On Creating Ext4 Fs, 11.04 Sux0r?

May 5, 2011

I burned my liveCD very slowly and checked it for integrity. It works fine on, for example, my dell inspiron 1012 netbook.

I am able to create the partitions etc and am shooting for a win7 dual boot. Don't want wubi or the like.

I am unable to boot the liveCD or even install the OS as it hangs on clicking "Try" and the install hangs on "Creating ext4 fs on / "

Also the 11.04 CD seems to have a lot of issues based on my browsing the top few pages of the forum.

View 4 Replies View Related

OpenSUSE Install :: Install Problem - No Valid EXT4 File System?

Sep 16, 2010

I just trying installing OpenSuse 11.2 on a Dell Dimension 4500 2.0 Ghz with 512 mb memory and 40 gb hard drive.During the installation the following error was produced: "System Check for partition /dev/sdb1 contains no valid Ext4 file system". After the install process was completed, the keyboard and mouse were not useable

View 7 Replies View Related

Ubuntu Installation :: The Ext4 File System Creation In Partition Failed?

Feb 11, 2011

I have a Dell Mini 9 netbook. The SSD took a dump, so I ordered a Super Talent 16gb replacement. I put it in yesterday, tried to install 10.10 and constantly get errors. The first error, which I haven't had since, was [ERROR 30] Read-only File System. The install obviously failed. Wondering if perhaps the file got messed up in translation, I redownloaded 10.10, reformatted the flash drive (sandisk cruizer 4gb), put 10.10 back on via the program on the Ubuntu site. No luck, but no longer the [error 30]. Tried again using Unetbootin, no luck. Rinse repeat a few times, no errors just a working cursor spinning and spinning and spinning and spinning and.. you get it.

Tried to put WinXP on it just because I was that frustrated, no luck.

Now I'm back to Ubuntu (because let's face it, who wants to deal with Windows, christ they make it so complicated). I'm currently using 10.04 because I was hoping (praying) it might just be a 10.10 thing.

No such luck, now it goes to step 7/7, starts, and 5% of the way thry "creating ext4 file system" it says "the ext4 file system creation in partition #1 (0,0,0)(sda) failed." I have checked the SSD in the Disk Utility, SMART tests are clean. I have gone to terminal and run fdisk and had a smarter person than me look at the copypasta, no errors, I have deleted all existing partitions in gparted and started fresh. I have tried the auto partitioning, I have tried manual, I am going insane. Literally insane. My preschooler thinks I've leaped off the deep end.

Could it be my flash drive? Could the SSD be defective despite the tests coming back clean? What do I need to type into terminal? Is there a way to entirely entirely entirely wipe the SSD to make it fresh-out-the-box clean? I will happily provide whatever you need if it means I can get my husband off my back about this stupid netbook with its stupid tiny keyboard.

View 1 Replies View Related

OpenSUSE Install :: Mounting Or Checking A Partial Ext4 File System?

Sep 3, 2011

If you have a contiguous partial piece of an ext4 file system (assuming it's perfectly clean), starting from the beginning of the partition, is there any way to check it, or to mount it to get the files whose parents, inodes and data are all completely contained inside?

Have (or maybe had) a very large 11TB RAID 6 array, filled with a single large ext4 partition. Something strange happened when a single drive failed and the array ended up failing 13 out of the 11 drives. I had trouble getting the array restarted, and got to the point where I exhausted all of the options I considered completely safe. I considered a few things that may have worked, but mdadm doesn't seem to have a definite "do not change anything" option. So I decided the only way to be absolutely safe would be to clone the disks before proceeding - then I realized how much time that would take and sent the drives off to a recovery service so they could image them and check it out.

Before doing so, I copied the first 2GB from each disk. I XORd the images from the working drives to reconstruct the data chunks that were on the failed disk, manually assembled the chunks, and am very confident that I have 22GB of "correct" data in a single file. The parity and Q syndromes all matched (with RAID 6 you can still check with only 1 missing device). I've learned the fine details of ext4 from [URL], and have looked at lots of raw data from the reconstructed partition, and it all looks good. The recovery company says that they're not finding many inodes, but I found a lot of them, exactly where they're supposed to be. I tried to mount and e2fsk, but both processes seem to be extremely unhappy that the device size doesn't match the size implied by the file system geometry.

I considered hacking the superblock to manually reduce the size, but I figure that wouldn't work because there would then be more group descriptor blocks than it would expect after the superblocks. I might try doing that and compensating by incrementing the "reserve block count" to compensate. Alternatively, if there is some way to make the file appear to be the expected size with nothing but zeroes after the end of the actual data, maybe I could mount it and not get any errors until I cause the kernel to read past the true end of the file.

View 3 Replies View Related

OpenSUSE Install :: Convert The File System On Boot Drive From Ext4 To Btrfs?

Sep 11, 2011

I want to convert the file system on my boot drive from ext4 to btrfs.

I have converted by 2nd drive, unsure of how to convert the boot drive and partitions.

View 3 Replies View Related

General :: Recover Files From Ext4 File System Overwritten By New Installation

Jul 3, 2011

My main hard disk died and I replaced it. After installing windows in a small partition in /dev/sda, I thought I will try linux mint and went for it. (I need windows to play AOE, but ubuntu is my primary OS)I didnt see the options properly or some distraction, I choose the "install alongside windows" option probably expecting it to install it in the unallocated partition next to the windows installation. I had completely forgotten my second internal drive /dev/sdb which has the backup data. Linux mint went and installed itself on that drive.

Is there a way to recover individual files from the second harddrive. Now if I boot or open it through live cd, all I see in the linux mint file systems. I want to aleast recover my CV/resume from the second drive. The second drive is a single ext4 file system The old drive is completely dead, it doesnt even get recognized when I attach it to SATA.

View 1 Replies View Related

Ubuntu Installation :: The Ext4 File System Creation Fails On Single Partition (no Raid)

May 14, 2010

I can't seem to get past step 6 of he installation of Ubuntu 10.04. I get the error: The ext4 file system creation failed... on single partition (no raid). I chose ' / ' as the mount point, and have tried with and without a swap drive. I'm installing on a Sony VAIO VGN-NS160D, and the HDD was previously formatted to NTFS. There's no other OS so I don't see any way of getting a command line to try a sudo fdisk..

View 1 Replies View Related

Ubuntu Installation :: The Attempt To Mount A File System With Type Ext4 In SCSI2 (0,0,0), Partition #1 (sda) At / Failed

Oct 10, 2010

I grabbed the new lubuntu 10.10 from [URL] but it turns out I'm having a problem installing it on my netbook (Asus Eee PC 1015PED). While installing, this error pops up:

Quote:

The attempt to mount a file system with type ext4 in SCSI2 (0,0,0), partition #1 (sda) at / failed.You may resume partitioning from the partitioning menu.I'm installing via USB and have selected the option to erase everything and use the full HDD.

Edit: I had Xubuntu installed before.

View 2 Replies View Related

Ubuntu Installation :: Install System Backup Made By Remastersys In EXT4

Feb 2, 2010

I have a question about ext4,remastersys backup : I have upgraded from 9.04 to 9.10 via the upgrade button in synaptics, so it means that the files system was not touched, which means that my system is still ext3 as it was when I installed the 9.04. I can make a backup of my system as it is configured right now (that's how i like it) using remastersys.

Can I install my system backup into my machine after formating it into ext4 or when I create a backup using remastersys it must stay in the files system as it was when it was backed up? The issue is that right now the 9.10 responds from some reason a little bit slower than my 9.04 responded (to everything e.g. open/close windows etc...) and I read in the forum that ext4 makes 9.10 run faster.

View 1 Replies View Related

Ubuntu Installation :: Error - The Attempt To Mount A File System With Type Ext4 In SCSI1 (0,0,0), Partition #1 (sda) At /failed

Oct 15, 2010

Unable to install Ubuntu 9.10 on a new internal harddrive. The hardrive contains no operating system. This hardrive is the only drive present in the system.

Whenever the installation trys to mount the ext4 partition the following error appears: The attempt to mount a file system with type ext4 in SCSI1 (0,0,0), partition #1 (sda) at /failed

Iv'e tried over and over to get past this error to no avail.

View 6 Replies View Related

Ubuntu :: Error Creating File System: Helper Exited With Exit Code 1: Cannot Open /dev/mmcblk0p1: Read-only File System

May 2, 2010

I bought a new SD card which I intend to put some MP3s on - except that I can't write to it because it tells me the destination is Read Only. No-probs thinks I: I'll just reformat it.

"Error creating file system: helper exited with exit code 1: cannot open /dev/mmcblk0p1: Read-only file system"

Various chmod commands all result in Read-only file system. I tried umount then mount commands, but it couldn't find it to mount once I'd unmounted it using the same /media/ file path (I assume it's the only one).

View 9 Replies View Related

Ubuntu :: Ext4 File System Hosed After 11 Upgrade (duplicate Directory & File Names)?

May 8, 2011

I recently upgraded to Ubuntu 11 and a few days later my ecryptfs filesystem began misbehaving in a weird way. In my home directory, many subdirectory names are duplicated verbatim. Here's an ls -F excerpt:

Desktop/
Desktop/
Documents/
Documents/
Downloads/
Downloads/

I can no longer access files in those directories (if I ls the directory, it appears empty; I can cd to it, but there's nothing inside). Not all of the directories are duplicated/damaged like this, but most are. A few non-directory files are also duplicated in this fashion, so for example:

[Code]...

View 5 Replies View Related

Ubuntu :: Samba - Windows Read Files From A Home File Server With An Ext4 File System?

Jan 28, 2011

Can windows read files from a home file server with an ext4 file system? or do I have to partition the drive with the server (ext4) and an ntfs partition with the files on?

View 4 Replies View Related

Fedora Installation :: Omega "Pug" Respin File System (ext4)?

Jul 24, 2009

I see that F11 respin Omega-Pug live CD is available for download. Before I use up the bandwidth, can someone suggest if the file system default installation is ext 4, as in F11 live cd, or can one now choose ext 3. The reason I am asking is that mine is currently ext3, and I would not like to lose my /home partition, with all the stuff that has accumulated.

View 3 Replies View Related

Ubuntu Installation :: System Freezes Every Time I Install 'Drapes'

Feb 24, 2010

My system freezes every time I install "Drapes",why?

View 4 Replies View Related

Ubuntu :: Ext4 File System ?

Aug 6, 2010

I'm trying to figure out why files in linux are oriented in the folders the way they are. In Windows it's much simpler to picture. You have program files (C:Program Files(x86), system files (C:Windows), user settings for programs or personal stuff(C:User), and some weird folder names. I was noticing that the Ubuntu ext4 filesystem is a little more complicated. Some folder names are self explanatory, but others are not. Is there a guide, or some reading material on the history of the linux filesystem and how it morphed into what is presently used in Ubuntu?

View 6 Replies View Related

Ubuntu Servers :: Growing A 3.8Tb Ext4 File System?

Mar 29, 2010

I've already asked this in the mythbuntu and didn't get an answer there so I'm trying here. OK just added another 2Tb WD drive to my mdadm controled RAID5 array, and the reshape is finished:-

Code:

Code:
Mar 28 18:28:36 alpha2 kernel: [104357.343421] md: md1: reshape done.
Mar 28 18:28:36 alpha2 kernel: [104357.525114] RAID5 conf printout:
Mar 28 18:28:36 alpha2 kernel: [104357.525119] --- rd:4 wd:4
Mar 28 18:28:36 alpha2 kernel: [104357.525122] disk 0, o:1, dev:sda2

[code]...

View 6 Replies View Related

Ubuntu :: Accessing EXT4 File System Through Windows

Jul 31, 2010

Windows 7 by default cannot read/mount Ext4 type file systems. I installed Ext2fsd which allows me to mount my linux drive and navigate all the subfolders of my root (/) directory, however when I click on a folder from there (I.E, /home) this is what comes up: [URL].

View 4 Replies View Related

Ubuntu :: Does The Ext4 Journalling File System Need To Be De-fragmented

Nov 1, 2010

does the ext4 journalling file system need to be de-fragmented?

View 4 Replies View Related

Ubuntu :: EXT4 File System Getting Remounted A Bunch?

Dec 20, 2010

I just installed ubuntu on to a brand new samsung N310 series netbook, I opted for ext4 as I figure it should be stable, but awhile ago the laptop shut off with no visible reason, when I restarted I noticed that this is happening. What gives?

[ 202.405576] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 243.500906] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0
[ 303.782887] EXT4-fs (sda6): re-mounted. Opts: errors=remount-ro,commit=0

[code]....

View 3 Replies View Related

Ubuntu :: Use To Read / Write To Ext4 File System In Win7 X64?

Dec 22, 2010

1. What can I use to read/write to my ext4 file system in Win7 x64? 2. I use Macbuntu. Is there any way to get a translucent top bar 3. My computer seems to be running hot while on Ubuntu. The fan speed seems increased. It goes back to normal on Windows though.

View 2 Replies View Related

Debian :: 64 Stable Work With Ext4 File System?

Aug 23, 2010

Does latest Debian64 stable work with ext4 filesystem?can its root partition be ext4?

View 1 Replies View Related

CentOS 5 :: Which File System Use 5.6 By Default Ext3 Or Ext4

Aug 29, 2011

Which file system uses Centos 5.6 by default, Ext3 or Ext4? I have installed on Ext3, it's upgrade from 5.5, but howto convert into Ext4 without damage or lost data?

View 3 Replies View Related

Ubuntu :: Which Command Should Run From The Terminal To Know Which File System (ext3 - Ext4) Runs On

Dec 27, 2010

I'd like to know which command i should run from the terminal to know which file system (ext3, ext4, etc...) my Ubuntu runs on.

View 2 Replies View Related

Installation :: Installation - PC Freezes - Before Or After Creating The Partitions

Oct 30, 2010

My problem is that every time I try to install a version of Linux, my PC freezes(before or after creating the partitions) and just stops installing. I can't move the mouse cursor and that's it. This problem occured in trying to install Ubuntu and Fedora from cd and usb.

View 9 Replies View Related

Fedora Security :: Encrypt Ext3 / Ext4 File System?

Jan 6, 2011

I want encrypt my fedora file system.
How to i can encrypt ext3 or ext4 file system.

View 5 Replies View Related

General :: Stuck Choosing Between Ext4 And Ext3 For The File System?

Jul 7, 2011

I was in the process of installing Ubuntu 11.10, but got stuck choosing which file system to use. ext3 and ext4; which is better for a personal desktop? If ext4 is better, will it work well on my old PC (bought 3 years ago), or perhaps ext4 is not actually compatible with an old hard disk?

View 4 Replies View Related

General :: Old File System Discovered After Disabling Ext4 Journaling

May 7, 2011

I bought a ssd drive for my laptop, installed it, installed Windows 7, installed Kubuntu 11.04. Till then everything worked fine, and I had following partitions on my disc:

Code:

/dev/sda1 ntfs ~100MB win boot,
/dev/sda2 ntfs ~170GB win main,
/dev/sda3 extended

[code]....

It worked fine. While using 11.04 I encountered a serious bug in nvidia 270.41.06, and decided to switch to Kubuntu 10.10. I installed 10.10 on the very same /dev/sda5 (clicking a checkbox to format it). Everything worked fine, grub was installed and pointing to win7, and kubuntu 10.10. I disabled ext4 journaling as above, rebooted, and found, that grub now points to win7 and 11.04, and that system (which should have been removed during installation of 10.10) loads perfectly fine. I checked where 11.04 had been installed - still /dev/sda5. Win7 loads fine as well, so no linux on /dev/sda2 I checked if there was 10.10 kernel in /boot - no. File system on sda5 had no trace of 10.10.

I formatted sda5 with gparted, installed 10.10 again, disabled journaling and situation repeated, whole file system on sda5 changed. Enabling journaling did nothing, 10.10 didn't come back. I deleted sda3, sda5, sda6, made them again, installed 10.10, disabled journaling, and finally had my 10.10 on ext4 without journaling. So this is kind of solved, but I would still like to know that the hell happend? For the moment it looked like two file systems coexistened on one partition.

View 6 Replies View Related







Copyrights 2005-15 www.BigResource.com, All rights reserved