What happens if I install the DVD version of Fedora 15 over an existing installation of Fedora 15-KDE? Will it cleanly add any software I don't already have, or will it change or disrupt my installation?
View 5 RepliesI have fedora 12 currently installed on my laptop, but would like to install another version along side it. How do I do this? Will it detect the second version automatically and add a grub entry? Or do I need to do something else. Also, what partitions need formatting, do any new one except '/' need creating?
Current layout>
/dev/sda1 ext4 /boot 200 MB
/dev/sda2 ext4 20 GB <--- I want to install new version here.
/dev/sda3 ext4 / 20 GB
/dev/sda4 extended 425 GB
/dev/sda5 ext4 /media/Media 425 GB
Due to a problem I had with a 10.10 upgrade [URL] and the need to access data on the pc I upgraded, I downloaded the live CD and installed on the same pc. Now I have two versions of 10.10 on the same pc but in different partitions. Is there any way I can copy my settings from the partition that is not working (the upgraded one) to the one that is working?
View 1 Replies View RelatedI've had such good luck with Fedora (and this Forum), I'm attempting to put F12 on wife's brand new Sony Vaio, a VPCEB11FM, a 64bit system. I downloaded the Fedora-12-x86_64-netinst.iso, made sure it was ok with sha256.exe, then burned the image to DVD. Booted it up and let it default to "install or upgrade an existing system". It dead-ended in a dark blue or black screen. I re-started and examined the other options. Thought I'd try the one that says: "Install system with basic video driver". Got all the way through to where it got ready to start downloading files. Can't get past that point because it attempts to get to the Internet using the Sony's wireless card! Why would it try the wireless when there's a wired NIC card in this PC that requires no special driver etc. How to proceed from here?
View 3 Replies View RelatedI've just got another sata HDD and thought lets put in a nice install of Fedora 14 having tried out the live CD over the weekend. Right my system is configured thus
[Code]...
will Fedora 14's install program make an addition to the existing GRUB configuration or will it do something different Yes I have searched.... and looked at the installation documents....
Manual from Fedora says that I cannot Install Fedora 14 x64 bit version from USB.
Why?
Can't I use utillities like FlashBoot? or another tool to make bootable USB?
All, just did a freash install of fedora 10, and I have no sounds at all. Speakers work and are pluged in (everything works fine with my ubuntu partition) Nothing appears to be muted in alsa or on the gnome volume control Sound card = Creative Labs CA0106 Soundblaster
[code]...
So I want to install the original version of Fedora 15 and make it dual boot with my Windows 7. Problem here is that I don't have a cd/rom. and the iso file didn't have a .exe thingy.....
so now what? Also this is my partitions> http://img94.imageshack.us/img94/9853/unledtlh.jpg
I successfully installed fedora live CD KDE version on virtual PC. but I can't install the live CD Gnome desktop version. details: I just add vga=0x32D on boot, no problem booting after that. I am now log-in as live user, but I can't find the shotcut for installation on desktop "install to hard drive" but using the terminal, there's a file under Desktop, 'liveinst.desktop" I tried running it, graphical installation will appear, but during copying to hard disk, it says bad media.
View 1 Replies View RelatedI noticed that for the live cds there was one for GNOME and one for KDE but hte install dvd didnt have an option for one or the other
View 1 Replies View RelatedI have a fedora 11 with kernel package: kernel-PAE-2.6.29.6-217.2.3.fc11.i686
I would like to install the devel package for this kernel version, but I can't find it, because in the fedora repo there is only the original kernel (2.6.29.4....) and in the updates repo there is only the newest kernel package (2.6.30....)
Where can I find the packages which are between the fedora and update repos' versions?
I need to install different version of Perl with needed modules to Test Run a perl script (ASSP) without affecting the existing one as the old version of Perl is buggy with seg fault.
View 5 Replies View RelatedI haven't used linux for a long time, after this break i wanted to install ubuntu and give it a shot but altough that i have a 10gb free space and another seperate 2gb free space for a possible linux setup, installer can't seem to recognize them.
View 1 Replies View RelatedIs it possible to create a Live CD install of my existing Ubuntu installation? I mean, to create a Live installation CD of my system as it is now on my pc, with all the programs and utilities that I have installed, so that if the system crashes and is unbootable, I could be able to restore it to the state when I created the Live CD.
View 2 Replies View RelatedAfter spending almost 100 hours trying to get my MP3 player working I have decided to add an XP partition and use it there.I am an Ubuntu newbie and am finding the whole "new-dos" experience too frustrating for words.Can someone please explain in ENGLISH for an IDIOT how I can do this.
View 9 Replies View RelatedI have a machine dual-booting with a Windows and an Ubuntu installation on it. I want to reinstall Ubuntu on top of the existing Ubuntu installation on this machine so that I have a fresh install of Ubuntu.I don't mind losing all my data on my Ubuntu partition, but I need to keep all the data currently available on my Windows partition.
View 1 Replies View RelatedSystem: Lenovo R61i, that had Ubunta installed, removed and Vista Home Pre. installed. Plenty of hardware power. Want to install a Knoppix 6.0.1 from an existing CD I have. I want to be able to run both systems on the laptop (dual boot)? I have partitioned the hard drive using vista, so there is now a partition that I believe is Lenovo rescue, the main large C space, and the new partition about 6.4 gb that vista shrank out that is not assigned. When I try to install the Knoppix it just keeps loading in and ends up running live off the CD without installing to the hard drive.
I have stopped the loading sequence in different places, but don't know what to enter or where. I also wanted to install it onto my 64 gb flash drive that has nothing installed but comes up showing that it is fat 32. I have tried to install to the flash drive from the live running Knoppix under install to usb drive, it finds the drive, I select it, and the next window says there is no such file. So, that's my story and I'm stickin to it. All I want to do is get this system onto the laptop or flash so I don't ever have to deal with Microsoft Windows again!
my laptop currently has 8GB of RAM and I wouldn't want that going to waste. I have read about the issues with flash on the 64 bit versions of buntu. Would you recommend going 64-bit or 32-bit with PAE? also, does the 10.10 kernel have PAE enabled by default?
View 9 Replies View RelatedI am a complete stranger to Linux and don't know a thing about this . But my cousin has installed Fedora Linux ( she says it is Linux on Unix , Red Hat Nash ) on my laptop . The laptop was having Lotus symphony earlier and it had only single partition . As a result the Linux had overridden the existing OS and all the data is lost.
My requirement is to retrieve the lost data before I format my system again.. If it is possible to recover the lost data and if yes how to do that.
I would like to replace the exiting kernel in one of my Fedora 11 installs with an earlier kernel from a Fedora 10 Unity Spin...so I can use it to bring ATI functionality to Fedora 11. Also, I recall there being a way to unpack rpms and 'repackage' them using a different kernel development set. How is this done?
View 3 Replies View RelatedI installed Fedora and my existing boot up menu (Ubuntu & XP) disappeared leaving only Fedora. Using my Super Grub cd (boot trouble shooting cd) I recovered my previous boot system but it left me without the Fedora option. My question is, how can I integrate Fedora into my existing menu?
View 1 Replies View RelatedI have a dual-boot system with XP and Fedora. I had to reinstall XP a while ago. After XP reinstallation, to regain access to Fedora, I ran Fedora installation DVD. It told me that the hdd had a "loop file system" and that I had to reinitialize it. I chose "ignore", "upgrade" and then "Create new boot loader configuration". Everything works fine now, but when I tried to install F11 from a live cd I discovered that I couldn't. It can't edit the lvm part (nor delete it). The only things possible are to reintall F10 with the DVD that created the lvm in the first place or install F11 using preupgrade (the lvm remains ext3 so preupgrade can't edit it either).
My question is: how can I get rid of the lvm part without reinitializing the hdd (I don't want to lose the data on the other partitions). I want to reinstall Fedora but without lvm.I heard something about "fdisk" and "lvremove", but I have no idea how to use these, so I would like a detailed solution (something close to a tutorial).
Having read several threads and received excellent previous advice there are just a couple of points I want to check please before proceeding on laptop. I want to upgrade to 11.4 from 11.2. My disk setup is as follows:-
Disk /dev/sda: 120.0 GB, 120034123776 bytes
240 heads, 63 sectors/track, 15505 cylinders
Units = cylinders of 15120 * 512 = 7741440 bytes
Disk identifier: 0x462d462c
[Code]..
If I select existing /home root and swap partitions, format root but prevent formatting of /home and use a different user ID I believe that will leave my existing data intact and will allow me to trial new os. Is this correct approach? If all goes well and when I have new system working correctly, what is best way make old user id date accessible. Can I simply create my old id on new system and will that allow me to access data when I log on with that id?
Second question; at present I have the ability to boot to openSUSE, OS/2 and windoze. (It used to be done entirely by Boot Manager but during my last Linux installation I messed this up a bit so now machine boots to grub and this offers all three operating systems but chain loads Boot Manager if I select OS/2)
When I do the new installation what should I select to retain this setup so that I still have access to windoze and OS/2 but when selecting linux have new 11.4 system run.
I have Ubuntu 11.04 installed and running on my laptop and was wondering if there was any way to create an install disc/usb or some other way to install Ubuntu in its current state (including all apps, updates, settings etc.) onto my desktop.
View 6 Replies View RelatedAll am running on 2.1Beta for Skype and would like to find out if they is anyone who knows how I can upgrade from this version to the latest version.
View 1 Replies View Relatedwill it be possible to convert existing filesystem to new ext4 while upgrading from Fedora 10?
View 1 Replies View RelatedI downloaded the Fedora respin DVD from [URL]. I burned the image and tried to upgrade my existing RussianFedora 10 distro. However, even after the successful completion of upgrade process, I boot into the same old RussianFedora 10. I would, also, like to mention that the upgrade process seemed to be unusually fast, it took only 15 mins for the complete process!
View 2 Replies View RelatedI'm trying to upgrade my Win8/Wheezy 64-bit machine to Jessie 8.1 by installing from the amd64-bit netinstall iso image on a USB flash drive. I had done the previous, Wheezy, install on a disk partition that was whole-partition LUKS/LVM drive, with separate logical partitions for swap, root, and home.
Before doing the upgrade, I booted to the BIOS to ensure that my UEFI system had the correct, CSM and Legacy modes enabled in it, so that installer would boot using the non-efi BIOS mode.
Step one of the upgrade was to boot the netinstall and enter the rescue mode so that I could manually do the cryptsetup/LVM business. When I returned to the installer, I mounted the now-recognized logical partitions normally, choosing to format only the swap and / partitions.
During the entire process, I had to go into rescue mode one more time to manually mount the unencrypted /boot partition, along with my /home partition. I copied a backup of my old /etc/crypttab from the latter, and after returning to the installer, finished the install. That finish included installing grub on my hard drive's main boot partition.
Everything seemed to finish with no problems. However, when I try to boot the debian bootloader, I get tossed to grub rescue with the message that '/grub/x86_64-efi/normal.mod' doesn't exist. At this point I returned to the installer, mounted the /boot partition, and saw that there grub-install didn't create that an x86_64-efi directory at all. Instead, it had created an i386 directory. The exact name escapes me at the moment.
I *think* that my install was clean other than the last bit that was related to installing the bootloader. How to reinstall the bootloader in such a way as to make all of this work.
I am planning to install 10.4 when it arrives. And am not going to upgrade because i upgraded from 9.04 to 9.10 so now i need to refresh the system.But I have all my partitions except root using lvm2 logical volumes. My question is : What is the safest procedure to install 10.4 on an existing lvm2 without losing my files/partitions
View 2 Replies View RelatedI have a dual boot config with
sda1 /boot
sda2 Win7
sda3 /
sda4 Truecrypt Partition
i have grub1 working and chaonloading truecrypt loader if i choose "win7" in grub1 menu I want to install a new kubuntu (no upgrade) I have read that that there are problems with grub2 and truecrypt actually a bug that grub2 dont chainloads truecrypt boot loader many ppl seem to have problems with grub2 then i read somewhere that ubuntu install is not asking for grub2 to be installed and just installing it. is this right?
i think at least for the alternative install cd its wrong. i installed it on another pc and it asked me! it works for win7 and Ubuntu and i guess its grub2 but there is no truecrypt installed anyway, i wanted to ask is the live cd installer asks me for grub2 and what is the best and easiest way to stay with my grub and just change the menu.lst to the new kernel (i guess there will be one)