Ubuntu Installation :: Doesn't Show Up In GRUB
Jan 14, 2011
I installed it from a cd and it wouldn't work. (froze in the process). I then tried to install it through windows wubi and that didn't work (wouldnt boot) since I was unaware it was a known issue and thought it was me doing something wrong I uninstalled it,reformatted the hard drive and tried to install via a cd again this time it fully iinstalled but when I rebooted it tells me unable to mount drives and a shell will be shown.
in the end I have no files on ubuntu so I would like to clean up all reminance of the previous installs and be able to use a working install. since I have been installing and reistalling for the better part of 8 hours.Yexcuse the post sloppiness using my phone)
View 9 Replies
ADVERTISEMENT
May 7, 2011
I have a dual-boot setup with Windows 7 and Ubuntu 11.04. Each OS is installed on a separate partition of one hard drive. I read that installing Windows after installing Ubuntu wipes out Grub, so I made sure to install Windows first. Unfortunately, after completing the Ubuntu install and rebooting, I see no sign of the Grub menu. I followed several sets of instructions for reinstalling Grub, and after running grub-update, it appears that Windows 7 was added to Grub, and after examining the grub.cfg file, it appeared that that was the case. Despite appearing to be installed perfectly once inside Ubuntu, Grub doesn't show anything at startup. No matter what I try, I can't seem to make Grub appear, and now I can't get back to Windows 7. Am I missing something, or should I try a different bootloader?
View 8 Replies
View Related
Jun 4, 2011
I just upgraded to F15 from 14 and F15 doesn't show up in GRUB only 2 kernels of F14. I can't obviously boot into either one, so now I am stuck with nothing.
View 4 Replies
View Related
Aug 15, 2010
I have a new netbook - "Eee PC 1005PE-PU27-BK" and installed Ubuntu Netbook Remix 10.04, Kernel Linux 2.6.32-24-generic. I love Ubuntu, but I also want to be able to access Windows 7 if I can. I've read some on GRUB, but the menu on startup isn't showing my Windows 7 instance. I've tried reinstalling GRUB, but when I run sudo update-grub, I still get this:
Code:
Generating grub.cfg ...
Found linux image: /boot/vmlinuz-2.6.32-24-generic
Found initrd image: /boot/initrd.img-2.6.32-24-generic
Found linux image: /boot/vmlinuz-2.6.32-21-generic
Found initrd image: /boot/initrd.img-2.6.32-21-generic
Found memtest86+ image: /boot/memtest86+.bin
done
I know that Windows 7 is still on the system, I just can't access it.
View 5 Replies
View Related
Dec 4, 2010
I just reinstalled Ubuntu 10.04 (I was running it wubi but various issues prompted me to install it in a separate partition) and now windows isn't an option in the GRUB. I have windows Vista on /dev/sda2 and I can see it on GParted.
I tried looking through some of the other posts, but I think that I need some direct help with this one. I have tried update-grub and nothing changed.
I don't use Windows often, but it is nice to have the option.
All this is running on a Toshiba Saellite A215
View 5 Replies
View Related
Jul 12, 2011
i have a Computer with windows vista and Ubuntu dual booted, the thing is i upgraded to win 7 and now the grub loader doesn't show up. Ive tried all the usual fixes but i cant fix it all i need is a CD ore something to get me into the Linux install
View 5 Replies
View Related
Oct 12, 2010
I'm encountering an unusual problem with GRUB 2. Whenever I start up my system, my BIOS'es load and do their thing, and then hand the show over to GRUB, which is supposed to not appear or do anything because my GRUB countdown is set to 0, but instead I get two errors like this that appear for about 5 or 10 seconds (greatly delaying startup) and then Xubuntu, the first entry on my Grub menu, loads: (I set GRUB to automatically boot my first entry):
Code:
error: no suitable mode found
error: unknown command 'terminal'
View 9 Replies
View Related
Dec 10, 2010
I have ubuntu 10.10 running on my HP dv5 pavilion laptop So today i tried to reinstall grub on my pc .. i removed grub-pc and grub-common using synaptic then booted up with a live cd of ubuntu 10.04 i then mounted sda11 to mnt using sudo mount /dev/sda11 /mnt sda11 being my ubuntu directory containing the /boot then i installed grub to it using sudo grub-install --root-directory=/mnt /dev/sda it reported as installation finished.No error reported then i unmounted /mnt and checked for /boot/grub/grub.cfg seems like the file is missing so are the files in /etc/grub.d/ reinstall my grub back
View 9 Replies
View Related
Apr 18, 2011
i kept ubuntu cd into my laptop and then i restart my lap but it doesnt show anything ,again it shows my windows xp,i need to install ubuntu and i dont want delete xp,
View 1 Replies
View Related
Feb 6, 2010
I recently installed Ubuntu 9.10 onto my second hard drive, and now I can't boot into Vista (installed on hard drive #1). Grub2 just doesn't seem to be recognizing that there is a Windows Vista installation on the first hard drive.
I followed this guide (with Fabien's changes) because it seemed like they were having the exact same problem. But after rebooting, Vista is still not showing in the GRUB menu. In fact, the GRUB menu doesn't even show up unless I press Shift because it thinks that Ubuntu is the only OS installed on my computer.
My results with boot_info_script:
Code:
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=e94a058d-1d19-4a98-924b-1a5fce405bdd)/boot/grub.
=> Windows is installed in the MBR of /dev/sdb sda1:
[Code]....
When I was installing Ubuntu to HD2 (the 500gb one), I got a peculiar message saying that Windows was installed on it. There wasn't anything on HD2 though, because Windows Vista was most definitely installed on HD1.
However, if I chose to overwrite HD1 with Ubuntu, the message wouldn't come up. It seemed like the installer was confused as to which hard drive actually held my Windows Vista install.
View 9 Replies
View Related
Aug 10, 2010
When I download a game from the Ubuntu Software manager, it doesn't show up in the applications. Is there another place where the files are located? And how can I execute them? I am trying to run Mednafen
View 6 Replies
View Related
May 10, 2011
I upgraded from 10.10 netbook edition to 11.04 and something went wrong. After the grub menu I get the password window on that typical magenta screen with lights. Afterwards I get a message, that the netbook connected to the internet, but the Unity desktop doesnt show. Still the magenta desktop without anything. Already have tried to select the previous linux edition on the grub-menu, but no change.
View 1 Replies
View Related
Jan 17, 2009
I am trying to install my laptop in a triple-boot configuration with Fedora 10, Windows XP and Windows 7 beta. I did already installed them in that order. This is how it is layed out on the harddisk:
Now i want to use grub to present a menu at boot so i can select an OS. Because I installed XP last it boots straight into XP. I've understood i should be able to do the following:
All goes well until the last step (grub-install). It gives an error stating that /dev/sda doesn't exist, which is correct; It doesn't. I do have the "device" listed outside of the chrooted environment.
My question is: How do I get /dev/sda available in my chrooted environment?
View 3 Replies
View Related
Oct 14, 2010
Anyway since I upgraded to Ubuntu 10.10 when I right-click on something and there is another menu in that menu, it doesn't show up for the first time!
for example if I want to create a an "Empty File", I'll right-click on desktop and when I want to go to "Create Document" menu, it doesn't show up! so I must click somewhere else and try again so for the second time it works!!
View 9 Replies
View Related
Jun 10, 2010
I've had two students report a problem whereby Ubuntu does not show up as a menu option in Grub. Both systems used Wubi installations of Ubuntu 10.04 Desktop for x86 on Windows XP. In both cases, Ubuntu completed the installation process. Upon reboot, we have the options to choose between Windows XP and Ubuntu. However, once we enter into Grub, only the Windows XP option shows.
View 8 Replies
View Related
Jun 16, 2010
I had Vista installed then Ubuntu Grub showed both... then I wanted to try Fedora 13 an after install I had Fedora Bootloader but it only shows Fedora / other and other is Vista... how do I manually enter Ubuntu partition into /boot/grub.conf or should I just reinstall ubuntu grub and hopefully that will pick up vista and fedora? Lost on where to go with this.
View 6 Replies
View Related
Feb 16, 2010
I am about to make a fresh install of ubuntu 9.10 on my 160gb hdd and keep my home directory. Here I also have Windows XP installed, the swap, home and root. All of these are done manually and given names such as 'sda1', 'sda5' ect.(I do see them in system monitor > file systems) The problem is that the installer doesn't seem to show me these tables. I only get a 160gb big chunk. GParted will not show it either (but as root is running from their I guess it cant?).
View 6 Replies
View Related
May 20, 2010
I have a computer with pentium 3 that i'd like to run ubuntu 10.04 on. I've installed it from a livecd (the cd is fine, because i used that cd to install 10.04 on another machine, and its working perfectly). The installation went fine, and on the first boot everything worked fine as well. but when i tried it again, the computer started but at the desktop there were no panels on the top or bottom, although every thing else was working.
I could use Alt+F2 to run any application that comes preinstalled on the ubuntu cd including the terminal, but i can't access Applications, Places, System, etc.
Everytime at startup during boot there is a message that prints "error: no suitable mode found" "error :unknown command 'terminal'" (without the quotes).
this computer has a bit of a history as i once tried to install linux mint on it but failed because of a bad livecd. the grub got installed wrongly, tried to reinstall xp, didn't work, then ultimately after trying a few other things turned to DBAN, which surprisingly also failed crashing everytime i ran it before completing its erase, which leads me to believe that Dban didn't leave my hard drives in too good a condition. when the ubuntu live cd worked however i was ignited with a brand new spark of hope, and even that now is starting to diminish, is there no hope for my pentium 3.
View 1 Replies
View Related
Oct 6, 2010
I went to install the 10.10 RC yesterday but to my surprise when I got to the partitioning stage it showed up my drive as being blank, with no existing partitions.
Has anybody else had this issue? I'm not sure what to do as I had the same issue on the beta, I just assumed it would be fixed.
I have a 500GB Sata HDD and i'm running an AMD64 processor so the RC was the amd_64 version.
View 3 Replies
View Related
Mar 9, 2010
I'm currently running Karmic 9.10 in dual boot with Windows 2000. My computer has automatically updated and installed kernels 2.6.31-17, -19 and -20 (They show up in Synaptic as installed).
However, the newest kernel choice in my GRUB menu is 2.6.31-16-generic (followed by -15 and -14). These all start without any errors.
Question: Why haven't the newer updates shown up in GRUB for booting purposes?
Could it be a question that I didn't answer correctly some time back about accepting or not accepting an update or change in GRUB?
How can this be changed? The new kernels do not show up in Start-Up Manager either.
View 9 Replies
View Related
May 3, 2010
just tried downloading the latest version of ubuntu and install it on my laptop got an error message at the end of the installation (an I/O error, dev sr0,sector something) now when booting i got grub rescue. the only command working are ls and set. commands such as 'linux' or 'boot' show 'unkown command'
typing
ls (hd0,1) or ls /boot/
results in
unknown filesystem
I tried to reinstall grub using the 3 different methods as in [URL] got no error message while doing so except when typing sudo grub-install --recheck /dev/sda it told me something about being unable to locate ubuntu or something along those lines - sorry i thought i'd remember .. running out of option is there a possibility to download the latest pre 10.04 stable version?
View 9 Replies
View Related
Jun 15, 2010
I created a Fedora 13 x86 live image on USB using [URL] I've set it to boot using the USB and when it does I see the 10 sec countdown (or the options if I press a key), I tried all the options to boot the image but the screen just turns black for a few seconds and then the the monitor goes into "power saving mode" and nothing happens (I waited like 10 minutes). What's going on? I am trying to install fedora into an empty (secondary) HD, in the main HD I only have a win XP, and I don't want to burn a cd/dvd that's why I am trying to boot the USB.
View 2 Replies
View Related
May 9, 2015
I wanted to switch to Linux from Windows so I decide to install Debian. The installation completed successfully but after that the bootloader doesn't show after the system reboot. So it is just black screen. I have an option for booting Debian (which will go to a black screen) and go to command line which looks like command prompt in Windows. I tried going to the command and it shows
grub>
I don't know which command to input since I'm a newbie and not familiar with Linux. I installed Debian from USB using unetbootin. What I should do to successfully install Debian?
View 8 Replies
View Related
Jan 23, 2011
I've just installed a second hard drive in my laptop with windows 7 on one drive and Ubuntu on the other. I selected the side-by-side install in the Ubuntu install and let Ubuntu do the rest. Unfortunately Grub isn't seeing the windows install even after reconfiguring grub. However, the windows 7 drive is visible in Ubuntu and all the windows files are there intact.
Does anyone know how I can make grub see Windows 7 so I can boot into it?
View 5 Replies
View Related
Jun 7, 2010
I've got a dual-booting system with Windows 7 and Opensuse 11.2. I had a few other random kernels so I edited /boot/grub/menu.lst to remove them. This was fine after a reboot, then I went to YaST and changed the default boot partition to Windows, because I had edited the MBR and put Windows above the other boot partitions, YaST changed "default" to 0.
Now after a restart the Boot Loader doesn't appear, I just have a flashing cursor. When I try to boot from an OpenSuse installation disc and try repair the Repair Kernel loads but freezes on the OpenSuse splash screen. I've heard this is due to the fact I have an ATI Radeon card, if I hold shift during the CD load to prevent the graphical interface of the CD loading. I can type to boot "rescue" but it freezes on "starting udev...". Essentially I just need to be able to edit menu.lst back to the backup I made or change the "default" value back to 1.
View 7 Replies
View Related
Nov 29, 2014
Basically I had windows 8.1 running on my fujitsu lifebook A532 laptop and wanted to dual boot kali linux alongside it, however upon installing the linux it deleted EVERYTHING! on my laptop, the grub bootloader only showed kali linux to choose from...
I then decided kali linux is too complicated for me and decided to delete everything and reinstall windows 8 again however I was surprised that my bios screen looks diffrent also I can not edit the boot sequence.
If I press f2 or f12 it takes me to a screen with a tab named Boot menu and its written on it debian and every time I press enter on it it takes me back to this same screen...
I can not boot from cd or usb!
View 3 Replies
View Related
Dec 30, 2010
I've done a clean install of XP Pro on my HP XW8200 (Boot drive is 2x73GB SCSI drives set up as RAID 1)I've run the Ubuntu 10.10 desktop installer and partitioned the drive, installed ubuntu and rebooted when requested.No OS selection screen appears after POST though. Just goes straight into WinXP. The startup options in XP only show XP.Rebooted from the Ub10.10 live cd and checked that the partition is there and the OS files are there.
Any ideas why the grub menu doesnt appear?I'm assuming it's something to do with Ubuntu not seeing the RAID drive but it did install ok..
View 9 Replies
View Related
Feb 26, 2010
I loaded Kubuntu 9.1 and got a mess in the Grub 2 Boot Menu, which I can't correct.
I get extra choices in the Boot menu, and the first few, which are supposedly for Kubuntu Karmic Koala all put me in a shell, which ends in a black screen, then shows up a shell once I hit "enter". Then I just have a "intramfs" (?) prompt.
So I went into Grub2 to change it, and it refuses to do it. All I get is a screen full of error messages every time I try, with no change. Apparently it is looking to access drive sdb8, which is non-existent. I DO have a drive sda8, though.
So with all the wonderfulness of the indirect system to change Grub 2 how am I supposed to set it right? The old Grub worked fine, and just took simple changes to the menu.lst file.
Can't somebody write a program that lets Grub 2 be changed from within the program, rather than all this running around trying to find what file to change, and how to get the change to work?
Just to be clear, here are the errors as they show up when grub-update is flailing around:
"error: cannot open '/dev/sdb' while attempting to get disk size
error: cannot open '/dev/sdb' while attempting to get disk size
Generating grub.cfg
error: cannot open '/dev/sdb' while attempting to get disk size
[Code].....
View 9 Replies
View Related
Jun 25, 2010
i have Vista 64Bits Ultimate installed on an 1TB hard disk whit 3 partitons I have a 2nd 160GB HD in my system which i installed Ubuntu 10.4 on. All went ok, except after the installation finished and the system rebooted it booted straight into windows, whitout ever displaying GRUB. Now i found a way to boot either system, by using the bios and setting the applicable HD to 1st device. (or something similar)
Any way on how to solve this? keeping to have to enter the BIOS to select the HD and Thus OS i want to boot aint very practical. (im currently using ubuntu BTW)
Code:
Boot Info Script 0.55 dated February 15th, 2010
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks on the same drive in
partition #1 for /boot/grub.
[code]...
View 9 Replies
View Related
Sep 30, 2010
When I restart, GRUB sometimes doesn't start. It just hangs at the flashing cursor before grub.
When I restart again, grub works fine. The flashing cursor shows at the top of the screen for a few seconds, and then there is one or more new lines, and then the grub screen.
This is on an HP Pavilion 640 which is otherwise very stable.
View 5 Replies
View Related
