Debian Installation :: Grub Bootloader Only Show Kali Linux To Choose From - Screen Not Allowing To Boot From CD
Nov 29, 2014
Basically I had windows 8.1 running on my fujitsu lifebook A532 laptop and wanted to dual boot kali linux alongside it, however upon installing the linux it deleted EVERYTHING! on my laptop, the grub bootloader only showed kali linux to choose from...
I then decided kali linux is too complicated for me and decided to delete everything and reinstall windows 8 again however I was surprised that my bios screen looks diffrent also I can not edit the boot sequence.
If I press f2 or f12 it takes me to a screen with a tab named Boot menu and its written on it debian and every time I press enter on it it takes me back to this same screen...
I can not boot from cd or usb!
View 3 Replies
ADVERTISEMENT
Nov 3, 2015
How to install BURG on Debian/Kali?
View 3 Replies
View Related
Aug 19, 2010
I installed Debian on my PC and then installed Ubuntu. This worked fine and I could dual boot between the two. The PATA disk was /dev/hda on debian and (I think) /dev/sda on Ubuntu. I copied the entire disk to a sata disk using dd from knoppix and put the PATA one to one side. Now the Ubuntu comes up fine but when I boot debian, it complains about references to /dev/hda1, which is present in grub - root=/dev/hda1. Debian now expects sda references rather than hda references. How do I persuade Ubuntu to write /dev/sda1 to the bootloader rather than /dev/hda1 using grub-mkconfig?
View 1 Replies
View Related
May 9, 2015
I wanted to switch to Linux from Windows so I decide to install Debian. The installation completed successfully but after that the bootloader doesn't show after the system reboot. So it is just black screen. I have an option for booting Debian (which will go to a black screen) and go to command line which looks like command prompt in Windows. I tried going to the command and it shows
grub>
I don't know which command to input since I'm a newbie and not familiar with Linux. I installed Debian from USB using unetbootin. What I should do to successfully install Debian?
View 8 Replies
View Related
Jul 31, 2010
I currently dual-boot XP and Debian sid. I currently have XP on /dev/sda1, sid on /dev/sda2 with /home mounted separately on /dev/sa3, swap is /dev/sda4. I have free space in both sa3 and 4, mostly in 4, of course. What I'd like to do is add a third partition, either with or without a separate home mount, but have my current grub2 still be the bootloader. I'm thinking I'll give a total of 33 G to it (I keep almost nothing on my hard drive, it's all on the cloud). I want to install Kubuntu and try it out, I've burnt the Live CD and it's very cool.
View 9 Replies
View Related
May 26, 2011
I just want to ask if there is a way to make grub bootloader automatically boot to ubuntu every start up. And only make the bootloader appear when I press a certain key(ie. F7) so that I can boot to windows when I do not want to boot on Ubuntu.
View 2 Replies
View Related
Mar 17, 2011
My laptop screen goes blank right after the bios is loaded. Live CDs have no effect either.I installed arch linux to my whole HDD today. Last time I installed ubuntu linux to my whole HDD, the same problem happened.The way I fixed the problem last time was by formatting the HDD with an internal HDD dock and then installing windows with linux dual boot.As I do not want to go through the hassle by installing windows again, and I would be very delighted if anyone had an alternate way. I really want my laptop to be windows free!It seems to me that my laptop is somehow constructed to crash / go blank if no windows partition / boot loader is detected. I have no idea why they would do that, maybe you have a better explanation?
View 9 Replies
View Related
Jul 27, 2010
Whenever I load Ubuntu on a machine with other OS(s) loaded it always recognizes and adds an entry in the bootloader menu. Not this time. Well kind of. After the install my windows boot option was in the menu, but after an update it is no more. I see the different Linux images... but no Windows boot option. Can someone tell me how to add my windows XP boot option back to the bootloader? I have XP on the the on the 5th partition and Ubuntu on the 6th...
View 3 Replies
View Related
Feb 5, 2010
I am helping my pal to get into Debian (yes first timer).He is running W7 on a 500G SATA HDD and he has another 250G SATA HDD that he wants Debian to go to.Will Debian install grub on the master bootloader even if the installation is going on a separate hard drive?I have dual boot before but on the same hard drive.
View 6 Replies
View Related
May 25, 2011
Recently I had to a complete system install of ubunty 11.04 and win7. I installed unbutu first, then win7. Well when it was all said and done, I figured when I started, I would get the option to either boot in to ubuntu or win7,all I get is win7.Now I downloaded and installed EasyBCD2.0 configured it, but when I boot again I get either win7 or ubuntu. But when I choose ubuntu it doesn't show nothing. So how to I find ubuntu and get it to boot.
View 9 Replies
View Related
Nov 11, 2015
I have an issue after the installation of debian 8.2 on an usb flash drive:
I had debian 8.2 and windows 8.1 running on a single SSD. Everything was fine. I wanted to install a second debian on a 32gb USB flash drive as a live system. After the installation I am not able to boot my debian (SSD) without the flash drive plugged in. I only get a grub rescue prompt. Booting windows still works. It is also possible to boot both debian systems if the USB drive is plugged in.
So it seems to me, that the debian bootloader was accidently installed to the USB flash drive and the original bootloader on the SSD does not work properly anymore. I used a netinst image from a second USB flash drive to install debian to the first USB flash drive.
Update fdisk output:
/dev/sda1 2048 2050047 2048000 1000M Windows recovery environment
/dev/sda2 2050048 2582527 532480 260M EFI System
/dev/sda3 2582528 4630527 2048000 1000M Lenovo boot partition
/dev/sda4 4630528 4892671 262144 128M Microsoft reserved
/dev/sda5 4892672 223840255 218947584 104,4G Microsoft basic data
[Code] ....
View 6 Replies
View Related
Feb 29, 2016
Some thing quite bad happened to me , i installed debian jessie about 2 month ago. Today I wanted to try what a gnu/linux is like so I installed dragora 2.2 on one of my free partitions , (sda 1 is my debian root , sda2 is my debian home, I had sda4 which nothing was on it so i installed dragora on it. But something bad happened , during boot time you get this page which asks you what distro you want to enter in past I had just one choice and it was debian jessie, I expected after installing dragora I will see 2 distros on this page, but i get just 1 , and that's dragora ... but maybe i should mention this that when entering dragora i can access all my previous files , debian systemfile , debian home , they are still there but i can't enter debian jessie ...
View 2 Replies
View Related
Mar 28, 2010
How do I make debian not show the grub list, and just go to the newest kernel?
View 7 Replies
View Related
Nov 29, 2010
In order for me to get started with Linux, I downloaded & installed Virtualbox (V3.2.10) on my WinXP machine, and downloaded the Puppy Linux image from as per[URL].. When I start up the VM, I get a GRUB menu allowing me to boot
Quote:
Linux (on /dev/hda1)
Install GRUB to floppy disk (on /dev/fd0)
Install GRUB to Linux partition (on /dev/hda1)
I tried the first option, which results in Quote:
Booting 'Linux (on /dev/hda1)'
root (hd0, 0)
Filesystem type is ext2fs, partition type 0x83
kernel /boot/vmlinuz root=/dev/hda1 ro vga=normal
[Code]...
View 7 Replies
View Related
Mar 9, 2010
I'm currently running Karmic 9.10 in dual boot with Windows 2000. My computer has automatically updated and installed kernels 2.6.31-17, -19 and -20 (They show up in Synaptic as installed).
However, the newest kernel choice in my GRUB menu is 2.6.31-16-generic (followed by -15 and -14). These all start without any errors.
Question: Why haven't the newer updates shown up in GRUB for booting purposes?
Could it be a question that I didn't answer correctly some time back about accepting or not accepting an update or change in GRUB?
How can this be changed? The new kernels do not show up in Start-Up Manager either.
View 9 Replies
View Related
Jul 19, 2010
I'm relatively new to Ubuntu, I've installed it in Virtual Box and through Wubi on other computers but this was the first time that I've done a live install on my production computer. I had problems from the get go, I was using a Live CD of 10.04 (64 bit AMD) to install it and when it got to the part about choosing a partition no drives would show up at all. Eventually after some searching around, I discovered that Using an Alternate install CD would work. I did that, installing Ubuntu into one of the free partitions I had set up prior to this. Eventually my system turned on but the monitor went to sleep so I had to hit E on the grubmenu and change something to nomodeset (or something like that) so that I could see the screen. I installed Compiz and it was all good from there.
Except for One issue, I cannot boot Into windows at all, it doesn't show up on the bootloader even though the partition shows up in Gparted. I've tried updating Grub2 with no results, here are the results of Sudo fdisk -l
Disk /dev/sda: 400.1 GB, 400088457216 bytes
255 heads, 63 sectors/track, 48641 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disk identifier: 0x1549f232 .....
View 9 Replies
View Related
Mar 24, 2010
Ive been using it for a few days and it kept reminding me to update some files. (about 200mb worth) after it finished installing i rebooted but it won't show me a login screen. it only shows me a commmand line. it allows to 'exit' and then it boots windows.
View 9 Replies
View Related
Jun 7, 2010
I've got a dual-booting system with Windows 7 and Opensuse 11.2. I had a few other random kernels so I edited /boot/grub/menu.lst to remove them. This was fine after a reboot, then I went to YaST and changed the default boot partition to Windows, because I had edited the MBR and put Windows above the other boot partitions, YaST changed "default" to 0.
Now after a restart the Boot Loader doesn't appear, I just have a flashing cursor. When I try to boot from an OpenSuse installation disc and try repair the Repair Kernel loads but freezes on the OpenSuse splash screen. I've heard this is due to the fact I have an ATI Radeon card, if I hold shift during the CD load to prevent the graphical interface of the CD loading. I can type to boot "rescue" but it freezes on "starting udev...". Essentially I just need to be able to edit menu.lst back to the backup I made or change the "default" value back to 1.
View 7 Replies
View Related
Dec 28, 2015
I have Windows 10 and Deb 8 dual boot, and I need to re-install Windows but want to avoid (or at least plan for) losing Grub/Linux boot.
Last time I re-installed Windows after Linux I ended up having to re-install Linux again afterwards as well, because I couldn't recover it (seemingly due to complications from encryption). So this time I'm wanting to plan and avoid that.
CURRENT DISK PARTITIONS:
Code: Select allsda1 | 550M | EFI System
sda2 | 128M | Microsoft reserved
sda3 | 175.8G | Microsoft basic data
sda4 | 286M | Linux filesystem (Boot)
sda5 | 28.2G | Linux filesystem (Root)
sda6 | 91.3G | Linux filesystem (Home)
sda7 | 1.9G | Linux swap
[Code] ....
As there is a "Microsoft Reserved" partition and a separate Microsoft directory within the EFI partition, if I just go ahead and reinstall Windows will it install it's boot loader/image to one of it's own partitions? And NOT affect anything else like Grub and other Linux things?
Logic tells me yes, but there seems to be many issues on the internet about installing Windows after Linux.
My primary concern is whatever happens with Windows or anything to do with dual loading etc, is that Linux will still just boot, or I can get it working again without much hassle.
Why is there a reserved Microsoft partition AND a Microsoft directory in the EFI partition? Which one boots Windows?
Why is there a separate Linux Boot partition AND a Linux directory in the EFI partition? Which one boots Linux? Where is Grub invoked from, is one redundant, etc?
How these work. It is possible I've set them up wrong, or with redundant partitions, but both systems have been booting ok for months.
View 3 Replies
View Related
Mar 21, 2011
I've built a system with windows 7 on one hard drive and Ubuntu 10.04 64bit on the other, and would like to choose OS on startup using Grub. I installed each OS with only that drive connected in isolation. I then connected both drives and pointed the bios startup at the Ubuntu drive. sudo os-prober sees the windows 7(loader) and sudo update-grub has given the windows option on startup. However, when i choose windows in Grub I get 'error: no such device' and 'error:invalid signature'. Windows starts ok when the drive is chosen from the BIOS.
View 4 Replies
View Related
Feb 21, 2010
Adding freebsd to grub bootloader
[URL]
View 2 Replies
View Related
Feb 22, 2011
another post about this. I just don't know how to handle this, as I'm pretty nsee the grub loading menu, but screen just freezes after, no way I can reboot, or open a console. In recovery mode I can log as root in console, though.I run Debian 6, 64 bits. I have an intel q6600 and a nvidia geforce 9800GX2.
View 9 Replies
View Related
Sep 2, 2010
I have recently purchased a new laptop, which came with Windows 7 pre-installed. I immediately installed Ubuntu alongside it with a dual boot. At first it worked fine, but when I restarted after the first time I used Windows, I ended up with an 'Operating system not found' error. I was able to reinstall the Grub bootloader using an Ubuntu Live CD, which appeared to fix the problem, but the next time I loaded Windows 7 and rebooted, the problem reappeared I think the problem is that Windows 7, for whatever reason, is somehow removing or disabling Grub.
View 1 Replies
View Related
Jun 3, 2010
Im finally deleting vista from my disk, but as I am game addict I will re-install it afterwards just for games. Now I assume that will overwrite GRUB, so how do I restore boot record and at same time keep my grub config?
View 5 Replies
View Related
Apr 7, 2011
i've got UBUNTU 10.10 installed on my laptop.After i turn my laptop on and the comp prepares 2 boot the OS,a screen asking me to choose which OS version i'd like 2 select.Now ideally i'd like jst 2 names on dat list namely-Ubuntu and win xp..But I've a host of other options as well like memory testblahblah'safemode'....wotevr....Is this ok 2 have so many OS startup options.Is there a way to get rid of unwanted stuff like changin the BOOT.ini file or in any other way???
View 11 Replies
View Related
Nov 16, 2010
I've recently installed a new graphic card after my old one started to go belly-up and it works nicely in X with twinview. The card have one VGA, one DVI and one HDMI. I have the monitor connected to the VGA and my projector connected to the DVI. However, when I boot the monitor (VGA) don't receive a signal. It is dead until X comes up (and when X comes up it does exactly what I want, it uses the VGA monitor as the main screen).
I had this setup on my old card to and it worked fine. Grub and boot console showed on both screens and I never had to tweak anything to make it do this.
how to enable the VGA outlet, either have boot enabled or only the VGA enabled (either way is fine by me but I really want to see Grub and the boot console on startup).
View 9 Replies
View Related
Sep 21, 2010
I was installing sqeeze i386 on my laptop VOSTRO 1400 and got this the 'grub-pc' package failed to install into /target/. without the GRUB boot loader, the installed system will not boot.
View 3 Replies
View Related
May 28, 2010
I was using the 9.10 version of Ubuntu, and everything was ok. So I decided to update to 10.04, by update manager, and it not works pretty well. So I decided to reinstall my ubuntu. In my PC I also have a instalation of Windows XP, my father and sister uses it. The installation went well, no problems, Lucid Lynx is working fine. But in the grub screen, if you choose Win XP, the CPU starts to whisthle continuously, and the only thing you can do is restart.
I have been reading about it, but do not find the exactly same problem. I have posted a thread in a portuguese forum (im from Brasil) and have no good responses. Sorry about the bad English, I dont have to much experience writing.
View 2 Replies
View Related
Aug 9, 2009
I recently installed Fedora on a triple boot system with Winows XP and Ubuntu JJ. how to add Ubuntu's grub to the bootloader. Here is the output of Fdisk -l.
[root@localhost rabbit]# fdisk -l
Disk /dev/sda: 250.0 GB, 250059350016 bytes
255 heads, 63 sectors/track, 30401 cylinders
Units = cylinders of 16065 * 512 = 8225280 bytes
[Code]....
View 8 Replies
View Related
Nov 2, 2010
Just got done installing F14 64 and all went well however when I rebooted the machine it boots straight into windows, where is my GRUB boot loader? Only one drive in this machine (sda) and I remember going through the GRUB settings during the install. How to get a bootloader working now because in my linux experience (since RH5) it has always just installed the bootloader and worked. Apparently ext4 is bunk for me and when using LVM settings. I am up and running and grub is working.
View 2 Replies
View Related
