Fedora Installation :: Repair Grub Through Grub-ubstall - /dev/dsa Doesn't Exist
Jan 17, 2009
I am trying to install my laptop in a triple-boot configuration with Fedora 10, Windows XP and Windows 7 beta. I did already installed them in that order. This is how it is layed out on the harddisk:
Now i want to use grub to present a menu at boot so i can select an OS. Because I installed XP last it boots straight into XP. I've understood i should be able to do the following:
All goes well until the last step (grub-install). It gives an error stating that /dev/sda doesn't exist, which is correct; It doesn't. I do have the "device" listed outside of the chrooted environment.
My question is: How do I get /dev/sda available in my chrooted environment?
View 3 Replies
ADVERTISEMENT
Feb 12, 2010
I have a dual boot windows XP/ubuntu 9.10 set up on one hard drive. Everything was working fine. The 9.10 install had been updated from 9.04. I recently had problems with the XP partition (XP basically collapsed) so I re-installed XP on the same partition it was on before. I then attempted to reinstall Ubuntu ( I decided I wanted a new 'clean' installation of Ubuntu as well). When I got to the partition function it refused to recognize that there is a Windows partition, or a previous ubuntu partition, but states 'No operating system installed' or similar, and offers the entire hard drive for installation. When I look at the partitions using Windows partition software the Windows and the ubuntu partitions are clearly in evidence. I have also tried to reinstall GRUB but it doesn't appear to exist.
View 3 Replies
View Related
Nov 24, 2010
I created a new partition in Windows Vista which, after rebooting, screwed up Grub. I believe that I need to reinstall Grub and everything should be fine, and I remember reading the command to do this on this forum, but I can't find it. When I boot, I now get a black screen with white letters instead of the Grub boot menu. It says something about "Minimal Grub" at the top and gives me a prompt that looks like this.
grub>
I can boot the live CD and I have internet access with it, but I can not remember the terminal command to repair Grub. Can someone tell me this command?
View 7 Replies
View Related
Feb 15, 2010
If at all possible I would like ot keep the GRUB loader and repair my situation.My slave drive has Windows 7. My master had Ubuntu on it. When it installed it added the GRUB loader.I replaced it with Fedora, but now the GRUB loader says it can't find the drive and bails to grub-rescue.If possible I would like to keep the grub loader. If I can't repair this, is there a way to uninstall it and reinstall it.
View 16 Replies
View Related
Dec 10, 2010
I have ubuntu 10.10 running on my HP dv5 pavilion laptop So today i tried to reinstall grub on my pc .. i removed grub-pc and grub-common using synaptic then booted up with a live cd of ubuntu 10.04 i then mounted sda11 to mnt using sudo mount /dev/sda11 /mnt sda11 being my ubuntu directory containing the /boot then i installed grub to it using sudo grub-install --root-directory=/mnt /dev/sda it reported as installation finished.No error reported then i unmounted /mnt and checked for /boot/grub/grub.cfg seems like the file is missing so are the files in /etc/grub.d/ reinstall my grub back
View 9 Replies
View Related
Jan 22, 2011
I'm going to be installing Windoze (because 3D graphics are still not there in Linux), but that will of course override the MBR. So how do I rewrite it? I just tried starting from the Fedora 11 DVD until it got into the 1st graphical screen, and then I tried to mount *any* of my Fedora partitions - I think it's made 5 of them (God knows why!!), but anyway,none of them would mount except /boot - kept saying "wrong fs type or superblock" etc. My plan was of course, to chroot my current Fedora partition, and then run grub-install, but of course I can't if the partition itself doesn't mount.
View 14 Replies
View Related
Oct 23, 2009
I have XP, Win7 Pro and F 11 installed. Before I installed F 11, Win 7 boot mgr was working fine. I then installed F 11 and I went to System/Admin/bootloader to edit it and it wouldn't bring up the boot loader. In the attachment was the error msg. Now my only option when I boot up is F 11.
I do not have access to the Win 7 DVD only the F 11 install disk since I am on a fishing trip and need to use Win 7. How can I repair to the grub boot loader to boot into Win 7?
View 3 Replies
View Related
Mar 2, 2011
I have installed windows 7 back to its former state in after foolishly messing around with some installation options in an Ubuntu install (this caused windows to disappear, and me to repair it). In *repairing* windows, I overwrote my grub file and the boot options for Ubuntu, so that it looks something like this:
Disk 1: Primary Partition - Windows 7
Disk 1: Secondary Partition - Windows 7
Disk 1: Secondary Partition - Free Space ( this is where I have Ubuntu installed)
How can I repair my grub file so that I can boot into my Ubuntu installation?
View 5 Replies
View Related
Jun 11, 2010
I have installed fedora 13 x64 using a live cd on my computer But i need to reinstall win7. after installing win 7 grub had been damaged. How can i repair Fedora using Live cd?
View 14 Replies
View Related
Jan 20, 2010
I installed ubuntu on my internal hard disk I experienced a problem with Grub and I just formatted all the Ubuntu Partitions and convert their format to NTFS to restore my windows (I have a backup) but now despite of I format all the Ubuntu's partitions but in the boot time, the grub exist and the grub apear I want to know where does grub exist? I installed ubuntu on the dual booter situation and it was ubuntu 9.10
View 1 Replies
View Related
Mar 7, 2011
Plan to use GRUB for multiple booting to select the OS but only with luck have I got it partially to work. Windows 98 and Puppy 431 O.K on first HDD but Puppy 421 on second HDD /dev/sdb1 stops at error 21.
View 6 Replies
View Related
Jun 18, 2011
I've done a search thru the forums on a recent headache but couldn't find anything. now we all know that windows installations knackers the grub boot-up, and it becomes modus-operandi to repair the boot loader, with a live distro. however, in my current dual boot system (vista.sp2/fedora12), i've done a clean install of windows7 over the current windows ntfs partition. as standard, the boot menu would vanish. but when i put in the live-linux cd, gparted now shows the fedora partition (sda6) as LVM2. i'm somewhat of a neophyte with linux, but fedora12, suse11.2 and ubuntu don't seem to yet support this file system.
since i don't have critical data on the fedora partition yet, i usually wouldn't mind reformating this part', but the wireless chipset on my laptop cost a fortune on cups of coffee and beer to install, and in addition i used the fedora12 FEL spin and want to keep the installation intact. is there anyway to make the LVM2 indentifier back to ext3 or 4 and repair grub form there (without loosing the current partition kernal etc.)?
View 5 Replies
View Related
Jun 4, 2011
I just upgraded to F15 from 14 and F15 doesn't show up in GRUB only 2 kernels of F14. I can't obviously boot into either one, so now I am stuck with nothing.
View 4 Replies
View Related
Jun 12, 2011
I had XP, Debian and F14 installed. Bootloader was the Grub from F14.
I installed F15 from DVD overwriting F14. In the new grub.conf I added:
Quote:
title Windows XP
rootnoverify (hd0,0)
makeactive
chainloader +1
title Debian
[Code].....
View 4 Replies
View Related
Jan 20, 2009
I am trying to boot kubutu from FC10's grub. FC10 is in MBR, installed kubuntu without grub. Is that a problem for me now? I mean, should I need to install kubutu grub in order to boot from FC10 grub? I tried with these methods but nothing works:
title Kubuntu 8.10 Linux
chainloader +1
title Kubuntu 8.10 Linux
[code]....
View 4 Replies
View Related
Jan 23, 2010
First time this has happened. I installed Fedora first (XP already installed) and then installed Ubuntu 9.10 64. Fedora doesn't show up on boot up menu. I've tried update-grub.
Before I would have just edited menu.lst, but now?? I dunno.
edit; Here's fdisk with Fedora on sda6
View 9 Replies
View Related
Mar 21, 2011
I have used CentOS for a while and have never run into this issue. I searched all over and didn't see a similar issue anywhere, I did an install of CentOS as a server (no GUI) with only the base. Partition is /boot ext3, size of 100MB. The rest of the drive is partitioned as / with ext3. This is being done on a CompactFlash card of 32GB in size. The BIOS sees it as an IDE drive.
When the install completes and the system reboots, the grub stops at the grub> prompt. There is no menu for OS options. If I do the following commands:
grub>root (hd0,0)
grub>kernel /vmlinuz-2.6.18-194.el5 root=LABEL=/
grub>initrd /initrd-2.6.18-194.el5.img
grub>boot
View 19 Replies
View Related
Jun 7, 2010
I have an HP Pavilion m7480n PC with Windows XP installed on the C-drive. I successfully installed FC 12 onto the spare USB drive. When I rebooted the PC all I got was a blinking underscore at the extreme upper left position of a totally black screen. After a bit of experimenting I found that if I hit the F1 key during the boot process, go into the BIOS setup, do nothing within the setup, and press ESC to get out of the setup then the PC will go back into the boot cycle a second time. During the second time however a small text message appears with words to the effect "Press any key to enter GRUB..." after which the GRUB splash screen comes up with the choice for FC 12 or "Other" (referring to Win XP). At that point I can boot into either one.
View 4 Replies
View Related
Jun 2, 2011
I had Fedora 14 (x86) and Windows XP with Grub Legacy (Grub) for dual boot in my desktop.
I installed Debian and Grub 2 replaced Grub in the MBR.
Must I reinstall F14 to recover Grub as bootloader or is there another lighter way to do it?
View 3 Replies
View Related
Aug 19, 2010
When I start the computer the boot menu doesn't prompt, when I try to load it manually it doesn't prompt neither, it just reset the command line.The grub.cfg was generated by update-grub.It's really annoying to load the kernel manually each time the computer starts.
View 3 Replies
View Related
Oct 13, 2010
I've just installed Fedora (F13) for the first time, on a new HDD, to give myself a dual-boot system. So currently I have:
So, at the appropriate stage in the install menu, there is an option for where to install GRUB, and a drop-down to choose which drive is the primary BIOS boot drive.
However, in both cases, no other drive except my new sdc is visible. So, I can install GRUB to MBR of sdc, or to first sector of boot partition - but no option to put it to my primary boot drive MBR on sda.
Likewise, in the GRUB configuration page, if I go to Add another OS, the only option it gives me is my new Fedora install. It doesn't list the Vista OS on sda at all.
The result is that I can boot to either OS by changing the boot drive priority in BIOS.
I guess my question is this:
- is this expected behaviour from the installer, meaning that I'll need to configure GRUB manually somehow? (gulp ) or
- did I do something wrong in the install process? or
- is this some weird bug manifesting itself?
View 12 Replies
View Related
Jan 5, 2011
I use Fedora 14 and have problems with graphic mode. What commands i should use in "grub>" to get single mode to repair my installation. This appears after try to change installt packages.
View 5 Replies
View Related
May 25, 2010
Is fedora 13 using GRuB 2 or still uses GRuB legacy?
View 8 Replies
View Related
Mar 11, 2010
i have installed first xp after that liux . but now i want to format xp. but xp is not formatting
View 4 Replies
View Related
Sep 24, 2010
I have been trying to repair the GRUB 2 Bootloader by using the LIVE Ubuntu Ultimate 2.7 DVD.
Basically I've been unable to boot Linux Ubuntu Ultimate 2.7 ( due to a multi boot set up) & read that it is possible to repair the boot loader by re installing it from the live dvd.
I've already tried to load up the DVD & run the Terminal program - on the command line I type '# grub-restore' & the reply is GRUB not loaded??
I've tried other command lines that are on various other posts but non of them work.
Or are there certain Linux operating system discs that have the function to repair the boot loader from the live dvd.
View 3 Replies
View Related
Jul 8, 2010
I had an dualboot problem, after updating ubuntu to 10.04 my windows vista option in the grub of ubuntu was gone.Now I have installed windows 7.And the grub does not appear again, there is no grub at all.Now sombody told me I could fix or repair the boot record in windows 7.Does somone know how I can repair the grub in which I can choose between windows 7 and Ubuntu?
View 6 Replies
View Related
Jul 20, 2011
I have forget the root password of Red Hat Enterprise Linux 5. Please tell me how to recover it from the other linux account of the same version. I also want to know that after setting the new password did I have to repair the grub or grub will be as usual.
View 1 Replies
View Related
Oct 28, 2009
The new GRUB2 was supposed to configure itself from the old grub, but got the kernel image partition wrong.I have booted from Knoppix live cd, but need to write to system files. I have searched, and found several suggestions that apparently work on Win machines, but RO permission for root on Linux is a harder nut to crack.
View 4 Replies
View Related
Jun 18, 2010
The boot sector somehow got messed up on a friends computer while updating. I used to know how to do it with the old version, but now that they've updated it and changed everything , how do you repair the boot sector from a live-CD with Grub 2?
View 5 Replies
View Related
Oct 10, 2010
i have using ubuntu for 3 days with no problem i have 3 operating system vista,7,ubuntu vista and ubuntu on c: drive today i want to use vista for something and when i open it on ubuntu boot menu my laptops recovery try to recover and just give an eror like:EROR with 200 punto when i restart computer i just saw eror: no such partition Grub rescue> command screen i have no recovery dvd and ubuntu cd now i left them to my friend so can i repiar it just with commands if ubuntu is demaged because of recovery screen on D: partition i have win7
i just start using ubuntu i dont know any thing about it
View 5 Replies
View Related