Ubuntu Installation :: Why Grub Menu Doesn't Appear?
Dec 30, 2010
I've done a clean install of XP Pro on my HP XW8200 (Boot drive is 2x73GB SCSI drives set up as RAID 1)I've run the Ubuntu 10.10 desktop installer and partitioned the drive, installed ubuntu and rebooted when requested.No OS selection screen appears after POST though. Just goes straight into WinXP. The startup options in XP only show XP.Rebooted from the Ub10.10 live cd and checked that the partition is there and the OS files are there.
Any ideas why the grub menu doesnt appear?I'm assuming it's something to do with Ubuntu not seeing the RAID drive but it did install ok..
View 9 Replies
ADVERTISEMENT
Apr 30, 2010
I tend to update stuff slower than most - I'm still using Hardy and I probably won't upgrade to Lucid until June-ish. I wanted to test drive GRUB2 so I upgraded following instructions here:When I chainloaded GRUB2, I got a menu that only contained Ubuntu; my Windows Vista bootloader entry had disappeared. I couldn't find a sample "40_custom" entry to modify when I tried to create an entry for Vista myself. Had no problem booting into Ubuntu and I could still boot Vista from the old menu. Spent about 20 minutes on it, then I gave up and reinstalled legacy GRUB.
View 9 Replies
View Related
May 4, 2010
I recently upgraded to 10.04. The grub menu shows my windows partition but does not load it when I select that OS.
View 2 Replies
View Related
Aug 19, 2010
When I start the computer the boot menu doesn't prompt, when I try to load it manually it doesn't prompt neither, it just reset the command line.The grub.cfg was generated by update-grub.It's really annoying to load the kernel manually each time the computer starts.
View 3 Replies
View Related
Aug 9, 2010
I want to change my default boot to Vista.I follow https://help.ubuntu.com/community/Gr...hangeDefaultOS
I try
Code:
gksudo gedit /boot/grub/menu.lst
[code]...
View 8 Replies
View Related
Jul 15, 2010
I have noticed whenever someone install Ubuntu 10.04 the grub menu doesnt get display. Is this a bug? Recently I did installed Ubuntu 10.04 with Windows as dual boot config and I did notice nothing like menu.1st instead it had grub.cfg. how to fix it?
View 2 Replies
View Related
Jul 17, 2010
Since upgrading to Lucid (I think), I can't boot into Windows. When I select the Windows Vista entry in GRUB, the screen goes blank for a moment before returning me to the GRUB menu.I have tried pressing 'e' to edit the GRUB entry before booting, and what I find is that it says the root is hd0,1Since my Windows partition is sda1 in GPartEd, should that translate to, for example hd0,0 ?The only reason I want to boot into Windows in the first place is to install a BIOS upgrade from HP, which only works with their Windows software. If someone can suggest an alternative way of doing this then I won't need to boot into Windows at all.
View 9 Replies
View Related
Dec 3, 2010
I am using Ubuntu 10.10, manually installed, on a Dell Studio 15 laptop, dual booting with Windows 7.While a few kids were playing nearby where I was working, one of the pillows they were playing with hit my laptop's screen and moved the screen's hinge backwards, applying pressure past where the hinge ends. This didn't seem to cause any physical harm to the computer, but I moved away from where they were playing, and in the process, shut the laptop, putting it into sleep mode. I opened the laptop and entered my password to unlock it. About half a second after entering my password and displaying the desktop and open windows, it brought up the password prompt again, as if I'd just opened my laptop up and removed it from standby, although I had not in fact touched it since I had entered my password a mere half second before. I thought that that was strange, and then attempted to continue my work. However, although the mouse worked fine, when I attempted to apply a keyboard shortcut (Ctrl+Alt+2, which runs a 2-finger scroll script and has to be run every time I take the computer out of standby), Ubuntu didn't register it (I didn't touch the keyboard otherwise, although I should have checked whether it worked all =).
I tried it again, and it still did not apply the script. Then I thought, "Oh, the pillow must have knocked something out of whack. I'll restart." When I restarted, grub loaded as usual, but the timeout ("loading the primary in Xs." sort of thing) that it usually displays did not display this time. I didn't notice it at the time; I selected Ubuntu, and it appeared to be loading it, removing the grub menu, but then hung. I waited 5 minutes for the computer to display the login screen, but it did not, so I restarted again, thinking that it might just be something stupid. It didn't work again, hanging again. I tried this with both the most recent linux kernel and the second most recent kernel, neither of which worked. But what was interesting is that Windows 7, which is also on the grub menu, loaded and displayed perfectly, as did GRUB Invaders, a game that can be loaded directly from grub.After this little escapade, I thought something was just wrong in grub.cfg, and it somehow wasn't mapping the Ubuntu menu entries to the appropriate OS and kernel. So I loaded up a live CD, and attempted to look at the linux entries. These are the menu entries 10_linux, 00_header, and 20_linux_xen.
10_linux:
Code:
#! /bin/sh
set -e
# grub-mkconfig helper script.
# Copyright (C) 2006,2007,2008,2009,2010 Free Software Foundation, Inc.
[code]....
View 9 Replies
View Related
Aug 12, 2010
Contents of grub.conf
Code:
# grub.conf generated by anaconda
#
[code]...
View 10 Replies
View Related
Oct 12, 2010
I'm encountering an unusual problem with GRUB 2. Whenever I start up my system, my BIOS'es load and do their thing, and then hand the show over to GRUB, which is supposed to not appear or do anything because my GRUB countdown is set to 0, but instead I get two errors like this that appear for about 5 or 10 seconds (greatly delaying startup) and then Xubuntu, the first entry on my Grub menu, loads: (I set GRUB to automatically boot my first entry):
Code:
error: no suitable mode found
error: unknown command 'terminal'
View 9 Replies
View Related
Feb 15, 2010
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want.
In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
Is there a document explaining all of the radical changes?
View 5 Replies
View Related
Apr 22, 2011
9.10 has no menu.lst file and hitting ESC to does not bring up the grub menu. How can we set bootup options or boot an alternate kernel? I would really like to set the resolution at boot time so that my console (Ctrl-Alt-F5, for example) has 80 columns instead of 40. (What a stupid default, gigantic Commodore-64-like text!) It would also be nice if the Login screen could be set to the resolution that I want. In previous releases, there were ways to do this. In 9.10, I haven't been able to figure out how.
View 1 Replies
View Related
Jun 10, 2010
i wiped my entire hard drive that had xp as its only OS. I freshly installed a Windows 7 ultimate and everything went perfectly. I then decided to install 10.4. I split the partitions correctly (i had experience doing this already with my laptop, which has xp/10.4). Ubuntu 10.4 install went flawlessly, except for one thing. Now when i boot up the pc, it goes straight into 10.4. I have tried holding shift during the start up to force the boot menu, and it just shows the Ubuntu 10.4 OS as choices. Any clue what i could do to make Win7 appear in the boot menu?
View 9 Replies
View Related
Dec 19, 2009
I just installed OpenSuse 11.1 alongside of Ubuntu 9.10. After finishing up the installation I find that I can't get into Ubuntu. I have tried adding Ubuntu to the OpenSuse /boo/grub/menu.lst but it doesn't seem to be working.
View 9 Replies
View Related
Dec 22, 2010
The first is I seem to have 3 GRUB installs. So whilst I update the one from my live session, the change does not appear in the boot up menu. I had installed 10.10 from a CD into a different partition (sda6), but that will not boot, so I have just deleted this and done another grub install and update. The kernel I am using has just been updated from 10.04 to 10.10 too, and it is this that I use and the Grub I have been working on (sda5).
[Code]...
View 9 Replies
View Related
Dec 10, 2010
I have ubuntu 10.10 running on my HP dv5 pavilion laptop So today i tried to reinstall grub on my pc .. i removed grub-pc and grub-common using synaptic then booted up with a live cd of ubuntu 10.04 i then mounted sda11 to mnt using sudo mount /dev/sda11 /mnt sda11 being my ubuntu directory containing the /boot then i installed grub to it using sudo grub-install --root-directory=/mnt /dev/sda it reported as installation finished.No error reported then i unmounted /mnt and checked for /boot/grub/grub.cfg seems like the file is missing so are the files in /etc/grub.d/ reinstall my grub back
View 9 Replies
View Related
Jul 28, 2009
I am testing my crash recovery strategy for my linux system and I am having trouble with GRUB. I am basically restoring my backup (i.e. tar) unto a different hard drive, but I am having problems getting the machine to boot without me having to type the GRUB commands at the GRUB prompt that is presented when the machine boots up off the new hard drive. I have tried to restore the MBR in two ways (the 2nd one is the one that gets me to the GRUB prompt):
1. Get the MBR off the original drive and write it unto the new drive (all via dd), but that did not work at all: the machine hangs right away during boot up. It seems to hang right at the point where the BIOS tries to read the MBR.
Code:
On original drive:
# dd if=/dev/sda of=mbr+part.bin bs=512 count=1
On new drive (new drive is now in place of original drive):
# dd if=mbr+part.bin of=/dev/sda bs=1 count=446 conv=notrunc
2. By using the FEDORA rescue CD, I installed grub unto the new hard drive as follows:
Code:
# chroot /mnt/sysimage
# grub-install --root-directory=/boot hd0
reboot and remove FEDORA CD Using the 2nd option above, I get the GRUB> prompt during bootup. I can then boot into the system by issuing the commands that are in the menu.lst file, followed by the "boot" command. However, I would like for those commands to happen automatically, just like in the original configuration. It seems to me that GRUB is actually finding all its stage files because I doubt the GRUB program (the one displaying the prompt) fits entirely in the 446 bytes it has on the MBR. So, it must be loading its stage 2 (and stage 1.5??) files from my /boot partition. However, if GRUB is loading its stage files off the boot partition, why does it not load/read the menu.lst/grub.conf contained in the boot partition also?
Code:
# ls -l /boot
total 22888
-rw-r--r--. 1 root root 1274567 2009-05-27 16:39 System.map-2.6.29.4-167.fc11.i686.PAE
-rw-r--r-- 1 root root 1274538 2009-06-16 22:27 System.map-2.6.29.5-191.fc11.i686.PAE
[code]....
View 3 Replies
View Related
Jan 17, 2009
I am trying to install my laptop in a triple-boot configuration with Fedora 10, Windows XP and Windows 7 beta. I did already installed them in that order. This is how it is layed out on the harddisk:
Now i want to use grub to present a menu at boot so i can select an OS. Because I installed XP last it boots straight into XP. I've understood i should be able to do the following:
All goes well until the last step (grub-install). It gives an error stating that /dev/sda doesn't exist, which is correct; It doesn't. I do have the "device" listed outside of the chrooted environment.
My question is: How do I get /dev/sda available in my chrooted environment?
View 3 Replies
View Related
May 18, 2010
single hdd
/dev/sda1 = 100mb Windows7 boot part
/dev/sda2 = Windows7 part ( encrypted w/ Truecrypt)
/dev/sda5 = /boot Ubuntu 10.04
/dev/sda6 = / Ubuntu 10.04
Truecrypt bootloader is in the MBR
The Truecrypt bootloader will boot other loaders if esc is hit, I can choose to boot /dev/sda5 and grub loads, but no menu is displayed, all I get is a GRUB> cli. I've reinstalled Grub to /dev/sda5 using the chroot method outlined in the Grub2 info page on this site, but it always results in the same outcome of ending up in the Grub cli. I can chroot that install and attempt a update-grub, but all i get is "cannot find list of partitions!" attached is the boot_info_script results.
View 9 Replies
View Related
Dec 11, 2010
Once upon a time I had Maverick Meerkat installed on two drives. Now I've used Disk Utility's "Format Drive" to erase it and remove the Master Boot Record partitioning on one of them. Yet I still have to go through the GRUB menu each time I start up my computer, as if there are multiple bootable drives. I've read that 'sudo grub-install /dev/sdb' might work, but that only seems to reset the bootloader, not remove it.
View 5 Replies
View Related
Jan 25, 2011
I have an external USB drive with Mint9 Fluxbox installed on it. At one point, I wiped the drive and set it up using GPT instead of MFT, then partitioned the drive in GParted and installed the OS.
This setup was working fine, but now I have a new laptop, and the OS won't boot. I just saw the errors, "No such partition: UUID=xxx", "Could not find kernel, hit any key to continue". So I attempted to reinstall GRUB via terminal, but saw errors saying that GPT requires a grub_bios partition. So I made a 1mb partition at the end of the drive, (the only unallocated space without moving anything) and selected the grub_bios flag.
I was then able to reinstall Grub without incident, rebooted, selected the USB drive to boot first in bios, but still no Grub menu!?! It just boots from the next device in the bios list.
I'm currently using Crunchbang on a USB stick, which is where I'm running terminal commands from. I want to be able to boot from my external drive on any computer.
View 4 Replies
View Related
Feb 1, 2011
I just restored my Windows partition from SFS so at least it's read by boot info. It says it's booting the Windows partition but it always boots straight into Ubuntu with no GRUB menu at all. Heres my boot info...
[Code].....
View 3 Replies
View Related
Feb 18, 2010
I have just installed Mythbuntu 9.10 on my Windows 7 PC to experiment with. I want to make Wingows 7 the default for the time being, but can't find a way to change grub's list. I don't seem to have the file /boot/grub/menu.lst and can't find anything else which might suit.
View 1 Replies
View Related
May 4, 2010
I am using kubuntu 9.04 dual booting with winXP. The package kit showed that I have 179 bug fixes. So I updated them.Now the boot time grub menu shows 6(two different versions for kubuntu and kubuntu recovery mode) entries instead of usual 4(winXp + kubuntu + kubuntu recovery mode + memtest). My grub.cfg file is as follows:
Quote:
#
# DO NOT EDIT THIS FILE
#
# It is automatically generated by /usr/sbin/grub-mkconfig using templates
# from /etc/grub.d and settings from /etc/default/grub
[code]....
What is wrong. How can I change the entries. Which one to remove ?
View 2 Replies
View Related
Sep 12, 2010
I have dual-booted Windows XP and Ubuntu. Because Ubuntu 10.04 doesn't have the required proprietary drivers for my system, I chose Ubuntu 8.04. The installation procedure went well, the drivers are there, everything's perfect but... there's a problem with the GRUB menu that appears just after launching my laptop.
When I first installed Ubuntu it showed Ubuntu (and some letters and numbers), another instance for recovery mode, some memory test lines (I guess there are two of them) and Windows XP.
But after I used the software updater in Ubuntu (to make it up-to-date), the grub bootloader shows two more lines - and those are the same as the first two - Ubuntu (with some letters and symbols) and Ubuntu recovery mode.
Why are those duplicates there? I've never installed another Ubuntu OS on my PC. Because at the moment I have two Ubuntu and two Ubuntu recovery mode lines .
View 4 Replies
View Related
Jul 5, 2011
I've installed 11.04 on my laptop (dual boot with Win7). It goes through the grub boot menu and boots in ubuntu but displays ~inch wide band near the top, nothing else. I assume it is a display issue (it has an ATI mobile Radeon HD 3870 X2 card) but can't seem to resolve problem. I can boot into Windows via the menu. In the grub menu I can boot into the command line (grub>) but can't seem to make progress beyond that. Within this grub interface, it won't take terminal commands.
View 2 Replies
View Related
Jul 28, 2011
I installed Ubuntu 11.04 (x64) today. I use an LG LCD monitor. After installation, I am unable to see the grub menu. I get a 'D-sub out of range 92.5 kHz / 58 Hz' message on screen instead of grub menu. I know the grub menu is there because, by pressing the 'down' button 5 times and then the 'enter' button I am able to select the windows loader. If I select nothing I am able to log into ubuntu without any display problem.
View 5 Replies
View Related
Nov 20, 2010
my Setup is Fedora 14 x64 + radeon hd 4830 i've downloaded .run package from ati site with latest driver for x64 systems. installed it, but didn't edited grub.conf becouse i didn't understood anything there (probably didn't spent enough time to get things understand) Now i've lost possibility to enter my Fedora system. during boot it lost it's modern blue boot screen (with filling drop), it was replaced by standard old boot screen with triple-color stripe. after this boot screen monitor start blinking going on and off. and on last step i'm getting "Fedora 14 boot bla bla bla something" on screen. nothing works except Ctrl+Alt+Delete. system reboots showing successful daemons shutting sequence. How can i edit grub menu from initial grub screen is it possible to it's own 'e' option or 'c' from grub command line?
View 4 Replies
View Related
Aug 13, 2010
I have tryed to install Ubuntu 10.04 using both the USB flash drive andthe live cd and both have not worked. The load screen appears and right as it looks like it is done loading and is about to bring up the menu it goes black and my monitor says that there's no signal
View 3 Replies
View Related
Mar 18, 2011
I installed F14 from my usb according to the wiki page using unetbootin. The usb boots perfectly and i get a working F14 system. I partitioned my HD with gparted and got a /,/home and swap partition, then used the installer to install the system using them. The installer finishes without a problem and ask me to reboot. When I reboot , there is a blank black screen. No grub menu , no fedora loading. I reboot with the usb and the partitions are full with the files from F14 , there is no xorg.log in the /var/log/ so f14 doesn't even start so the problem seems to be with grub.
I check the grub.conf in /boot/ , i set the timeout to 5 secs , i check that the kernel is using nomodeset (according to this wiki page there is a problem with ati), xorg.conf is using vesa as a driver and I reinstall grub with grub-install with no problems.My notebook is a acer aspire 5552 , i don't think is a hardware problem because I've used arch and opensuse with no problems in it. Fedora seems a nice distro , but this error is preventing me from using it.
View 1 Replies
View Related
