Ubuntu Installation :: Lucid Doesn't Show Panels On Startup?
May 20, 2010
I have a computer with pentium 3 that i'd like to run ubuntu 10.04 on. I've installed it from a livecd (the cd is fine, because i used that cd to install 10.04 on another machine, and its working perfectly). The installation went fine, and on the first boot everything worked fine as well. but when i tried it again, the computer started but at the desktop there were no panels on the top or bottom, although every thing else was working.
I could use Alt+F2 to run any application that comes preinstalled on the ubuntu cd including the terminal, but i can't access Applications, Places, System, etc.
Everytime at startup during boot there is a message that prints "error: no suitable mode found" "error :unknown command 'terminal'" (without the quotes).
this computer has a bit of a history as i once tried to install linux mint on it but failed because of a bad livecd. the grub got installed wrongly, tried to reinstall xp, didn't work, then ultimately after trying a few other things turned to DBAN, which surprisingly also failed crashing everytime i ran it before completing its erase, which leads me to believe that Dban didn't leave my hard drives in too good a condition. when the ubuntu live cd worked however i was ignited with a brand new spark of hope, and even that now is starting to diminish, is there no hope for my pentium 3.
View 1 Replies
ADVERTISEMENT
May 7, 2011
I have a dual-boot setup with Windows 7 and Ubuntu 11.04. Each OS is installed on a separate partition of one hard drive. I read that installing Windows after installing Ubuntu wipes out Grub, so I made sure to install Windows first. Unfortunately, after completing the Ubuntu install and rebooting, I see no sign of the Grub menu. I followed several sets of instructions for reinstalling Grub, and after running grub-update, it appears that Windows 7 was added to Grub, and after examining the grub.cfg file, it appeared that that was the case. Despite appearing to be installed perfectly once inside Ubuntu, Grub doesn't show anything at startup. No matter what I try, I can't seem to make Grub appear, and now I can't get back to Windows 7. Am I missing something, or should I try a different bootloader?
View 8 Replies
View Related
Jul 15, 2011
I've got a fresh install of Natty on my Dell Studio 17 laptop. The screen on the laptop doesn't work so I have it plugged into my Panasonic TV with an HDMI cable. The only problem is that the TV is not showing the outer edges of my desktop. So, I can't see the "Applications" menu, for example, or the button to click to Logout. I've messed with every setting available on the TV and nothing has helped.Can anyone provide any advice? I've started messing around with xrandHere is the output of 'xrandr':
Screen 0: minimum 320 x 200, current 3360 x 1207, maximum 8192 x 8192
LVDS1 connected 1440x900+1920+0 (normal left inverted right x axis y axis) 367mm x 229mm
1440x900 60.1*+ 59.9
[code]....
View 1 Replies
View Related
May 29, 2010
Currently Startup manager won't show all the tabs (appearance and secuirity) how do i get access to these tabs.
View 2 Replies
View Related
Sep 14, 2010
i just installed Ubuntu from an ISO about a year old and of course i updated it to the latest version and when i get that screen at startup where i have a choice of which version to load i get something like this: My current version, memtest, an old installation of Ubuntu and some really old versions. The problem is i also have Windows7 and Vista installed(vista really needs to go) but i don't have either of them as a choice in the bootloader. How do i get it back? Also before the update i had it on the list.
View 1 Replies
View Related
Oct 12, 2010
I'm encountering an unusual problem with GRUB 2. Whenever I start up my system, my BIOS'es load and do their thing, and then hand the show over to GRUB, which is supposed to not appear or do anything because my GRUB countdown is set to 0, but instead I get two errors like this that appear for about 5 or 10 seconds (greatly delaying startup) and then Xubuntu, the first entry on my Grub menu, loads: (I set GRUB to automatically boot my first entry):
Code:
error: no suitable mode found
error: unknown command 'terminal'
View 9 Replies
View Related
Jun 1, 2011
All I get now is an empty background color. Don't think I did anything to cause this. Creating a new user and logging in I have the complete Unity interface. How do I get the interface back using my initial user Login?
View 1 Replies
View Related
Jun 7, 2010
I have a strange problem: Due to my small monitor I have set the gnome panels on top and bottom to auto hide. After installing the nvidia drivers the panels do not appear if I go to the edges with my mouse. If I switch the resolution to VGA (640x480) however, the panels appear again, but not at top/ bottom but in the middle of the screen.
View 1 Replies
View Related
Jun 14, 2010
I am interested in removing the gnome panels from my desktop in 10.04. I know i can auto-hide the top and bottom panels and there is also an option to delete them. When they auto-hide a small white line is still visible and i accidentally hover over them sometimes briefly showing them also. I also do not want to do anything permanent like deleting them.In some past forum posts i saw people saying go to System>Preferences>Sessions but this option seems to be missing in lucid and these seem to be for slightly older versions on ubuntu. I then added the gnome-session-properties command in the Edit Menu... of System but all it did was launch Startup Applications. One post i saw said to go into Sessions, required sessions and make it empty. Should this work like i want it too and if so, is there an option like this still in Lucid. I basically want to remove the panels completely from my desktop, but still want to be able to bring them back if i want too also (Hopefully without having to edit them again, but i can live with it if i do).
View 4 Replies
View Related
Jun 17, 2010
I recently upgraded my Karmic to Lucid lynx and the splash screen at startup was missing. i thought i just needed to reboot my p.c and it will be fixed but it did'nt.
View 1 Replies
View Related
Mar 19, 2016
I have a Mac Pro 1.1 and am having trouble installing Debian. I installed rEFIt but it won't show my install and live disks at startup. I have very little experience with the command line but would be willing to try. I have installed debian to my pc and used the command line successfully there, but want the OS for my mac.
View 4 Replies
View Related
Aug 4, 2010
I created a customized Lucid image and installed on my computer which has 1 hard drive (/dev/sda)When I booted up .. it gave me an error indicating "Multiple active partitions" ... and did not boot up ...
I used my live CD and run as live session to check on the hard drive, When I issued the command fdisk -l on an terminal , the out put indicated that only /dev/sda1 is bootable, and other /dev/sda* were not bootable ...
I am not sure why I got the "Multiple active partitions" message at boot up time ..
View 3 Replies
View Related
Jan 14, 2011
I installed it from a cd and it wouldn't work. (froze in the process). I then tried to install it through windows wubi and that didn't work (wouldnt boot) since I was unaware it was a known issue and thought it was me doing something wrong I uninstalled it,reformatted the hard drive and tried to install via a cd again this time it fully iinstalled but when I rebooted it tells me unable to mount drives and a shell will be shown.
in the end I have no files on ubuntu so I would like to clean up all reminance of the previous installs and be able to use a working install. since I have been installing and reistalling for the better part of 8 hours.Yexcuse the post sloppiness using my phone)
View 9 Replies
View Related
Apr 18, 2011
i kept ubuntu cd into my laptop and then i restart my lap but it doesnt show anything ,again it shows my windows xp,i need to install ubuntu and i dont want delete xp,
View 1 Replies
View Related
Feb 6, 2010
I recently installed Ubuntu 9.10 onto my second hard drive, and now I can't boot into Vista (installed on hard drive #1). Grub2 just doesn't seem to be recognizing that there is a Windows Vista installation on the first hard drive.
I followed this guide (with Fabien's changes) because it seemed like they were having the exact same problem. But after rebooting, Vista is still not showing in the GRUB menu. In fact, the GRUB menu doesn't even show up unless I press Shift because it thinks that Ubuntu is the only OS installed on my computer.
My results with boot_info_script:
Code:
============================= Boot Info Summary: ==============================
=> Grub 2 is installed in the MBR of /dev/sda and looks for (UUID=e94a058d-1d19-4a98-924b-1a5fce405bdd)/boot/grub.
=> Windows is installed in the MBR of /dev/sdb sda1:
[Code]....
When I was installing Ubuntu to HD2 (the 500gb one), I got a peculiar message saying that Windows was installed on it. There wasn't anything on HD2 though, because Windows Vista was most definitely installed on HD1.
However, if I chose to overwrite HD1 with Ubuntu, the message wouldn't come up. It seemed like the installer was confused as to which hard drive actually held my Windows Vista install.
View 9 Replies
View Related
Aug 10, 2010
When I download a game from the Ubuntu Software manager, it doesn't show up in the applications. Is there another place where the files are located? And how can I execute them? I am trying to run Mednafen
View 6 Replies
View Related
May 10, 2011
I upgraded from 10.10 netbook edition to 11.04 and something went wrong. After the grub menu I get the password window on that typical magenta screen with lights. Afterwards I get a message, that the netbook connected to the internet, but the Unity desktop doesnt show. Still the magenta desktop without anything. Already have tried to select the previous linux edition on the grub-menu, but no change.
View 1 Replies
View Related
Oct 14, 2010
Anyway since I upgraded to Ubuntu 10.10 when I right-click on something and there is another menu in that menu, it doesn't show up for the first time!
for example if I want to create a an "Empty File", I'll right-click on desktop and when I want to go to "Create Document" menu, it doesn't show up! so I must click somewhere else and try again so for the second time it works!!
View 9 Replies
View Related
Jun 4, 2011
I just upgraded to F15 from 14 and F15 doesn't show up in GRUB only 2 kernels of F14. I can't obviously boot into either one, so now I am stuck with nothing.
View 4 Replies
View Related
Jun 16, 2010
I had Vista installed then Ubuntu Grub showed both... then I wanted to try Fedora 13 an after install I had Fedora Bootloader but it only shows Fedora / other and other is Vista... how do I manually enter Ubuntu partition into /boot/grub.conf or should I just reinstall ubuntu grub and hopefully that will pick up vista and fedora? Lost on where to go with this.
View 6 Replies
View Related
Feb 16, 2010
I am about to make a fresh install of ubuntu 9.10 on my 160gb hdd and keep my home directory. Here I also have Windows XP installed, the swap, home and root. All of these are done manually and given names such as 'sda1', 'sda5' ect.(I do see them in system monitor > file systems) The problem is that the installer doesn't seem to show me these tables. I only get a 160gb big chunk. GParted will not show it either (but as root is running from their I guess it cant?).
View 6 Replies
View Related
Oct 6, 2010
I went to install the 10.10 RC yesterday but to my surprise when I got to the partitioning stage it showed up my drive as being blank, with no existing partitions.
Has anybody else had this issue? I'm not sure what to do as I had the same issue on the beta, I just assumed it would be fixed.
I have a 500GB Sata HDD and i'm running an AMD64 processor so the RC was the amd_64 version.
View 3 Replies
View Related
Jun 15, 2010
I created a Fedora 13 x86 live image on USB using [URL] I've set it to boot using the USB and when it does I see the 10 sec countdown (or the options if I press a key), I tried all the options to boot the image but the screen just turns black for a few seconds and then the the monitor goes into "power saving mode" and nothing happens (I waited like 10 minutes). What's going on? I am trying to install fedora into an empty (secondary) HD, in the main HD I only have a win XP, and I don't want to burn a cd/dvd that's why I am trying to boot the USB.
View 2 Replies
View Related
Apr 5, 2011
I'm trying to help my dad, who's recently got a computer that had Ubuntu 10.10 preinstalled. After some problems while I wasn't in a position to help out, I think a reinstallation is necessary. But when I make a USB drive to install it from, it only has .exe files, and nothing Ubuntu can use, so it doesn't boot on startup (even though it's set to boot from USB first) and it can't be run later either. This happens when I download the ISO from the main download page on the Ubuntu website, so is there a link to download one without Windows files?
View 9 Replies
View Related
May 9, 2015
I wanted to switch to Linux from Windows so I decide to install Debian. The installation completed successfully but after that the bootloader doesn't show after the system reboot. So it is just black screen. I have an option for booting Debian (which will go to a black screen) and go to command line which looks like command prompt in Windows. I tried going to the command and it shows
grub>
I don't know which command to input since I'm a newbie and not familiar with Linux. I installed Debian from USB using unetbootin. What I should do to successfully install Debian?
View 8 Replies
View Related
Aug 19, 2010
I'm trying to do a clean install of Lucid (10.04.1) 64-bit on a Lenovo X201, Ubuntu only (no dual-boot), using the alternate install disk for an encrypted LVM.
I followed the default options at all points during installation, except that I opted not to configure the network because the computer is not currently connected to a network. The install (said that it) completed correctly.
When I turn on the computer, it correctly runs the BIOS. Then I get a blank screen with a flashing cursor in the upper lefthand corner. The hard drive accesses a couple of times. After a few seconds, the screen goes off (the cursor doesn't just vanish; the screen actually goes off), and it just sits there indefinitely without booting.
I should note that I've tried this with the boot order in the BIOS set several different ways, including HD first and only, with no effect.
View 6 Replies
View Related
Sep 22, 2010
Whenever I log in, restart, etc... There are no panels shown, I have to alt+F2, open terminal and run killall gnome-panels in order to have panels shown again. Is there a way to fix this?
View 4 Replies
View Related
Jun 7, 2010
I've got a dual-booting system with Windows 7 and Opensuse 11.2. I had a few other random kernels so I edited /boot/grub/menu.lst to remove them. This was fine after a reboot, then I went to YaST and changed the default boot partition to Windows, because I had edited the MBR and put Windows above the other boot partitions, YaST changed "default" to 0.
Now after a restart the Boot Loader doesn't appear, I just have a flashing cursor. When I try to boot from an OpenSuse installation disc and try repair the Repair Kernel loads but freezes on the OpenSuse splash screen. I've heard this is due to the fact I have an ATI Radeon card, if I hold shift during the CD load to prevent the graphical interface of the CD loading. I can type to boot "rescue" but it freezes on "starting udev...". Essentially I just need to be able to edit menu.lst back to the backup I made or change the "default" value back to 1.
View 7 Replies
View Related
Apr 30, 2010
I've just upgraded my web/tv setup from 9.10 to lucid and everything seems to be working apart from my infra red remote control.The remote was working fine in 9.10 and was used to control mythtv-frontend however after the upgrade the remote appears to be controlling ubuntu natively, i.e. right left up and down control what is selected on the desktop where as previously the remote was set to only work within mythtv. Whilst native support for my remote control is muchly appreciated(if that is what this is) where can I configure the controls so that it is usable again?
View 1 Replies
View Related
May 12, 2011
I find that I prefer have both panels located at the screen top. That way I don't have to go to the bottom of the screen for one thing, then back to the top for another. I arranged the panel so the regular top one is on top,then the panel that contains the open applications is underneath.The problem is, when I reboot, the panels lose their order. First, the regular top panel initializes, then the bottom ones starts and pushes the first panel down, which becomes what you see in the picture: I would like to find a way to keep them in the opposite order of what you see in the picture, but every time I reboot they end up in that order.
View 4 Replies
View Related
